From 4545bf482f029b7a49a7c2f88514b6c86ebf563f Mon Sep 17 00:00:00 2001
From: Eddie Hung <eddie@fpgeh.com>
Date: Wed, 7 Aug 2019 16:48:38 -0700
Subject: Remove tests/opt/opt_ff.{v,ys} as they don't seem to do anything but
 run

---
 tests/opt/opt_ff.v  | 21 ---------------------
 tests/opt/opt_ff.ys |  3 ---
 2 files changed, 24 deletions(-)
 delete mode 100644 tests/opt/opt_ff.v
 delete mode 100644 tests/opt/opt_ff.ys

(limited to 'tests')

diff --git a/tests/opt/opt_ff.v b/tests/opt/opt_ff.v
deleted file mode 100644
index a01b64b61..000000000
--- a/tests/opt/opt_ff.v
+++ /dev/null
@@ -1,21 +0,0 @@
-module top(
-    input clk,
-    input rst,
-    input [2:0] a,
-    output [1:0] b
-);
-    reg [2:0] b_reg;
-    initial begin
-        b_reg <= 3'b0;
-    end
-
-    assign b = b_reg[1:0];
-    always @(posedge clk or posedge rst) begin
-        if(rst) begin
-            b_reg <= 3'b0;
-        end else begin
-            b_reg <= a;
-        end
-    end
-endmodule
-
diff --git a/tests/opt/opt_ff.ys b/tests/opt/opt_ff.ys
deleted file mode 100644
index 704c7acf3..000000000
--- a/tests/opt/opt_ff.ys
+++ /dev/null
@@ -1,3 +0,0 @@
-read_verilog opt_ff.v
-synth_ice40
-ice40_unlut
-- 
cgit v1.2.3


From 35bf509603904633e4bfd1d21aef834966378a90 Mon Sep 17 00:00:00 2001
From: Eddie Hung <eddie@fpgeh.com>
Date: Wed, 7 Aug 2019 21:31:32 -0700
Subject: Add testcase from removed opt_ff.{v,ys}

---
 tests/various/wreduce.ys | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'tests')

diff --git a/tests/various/wreduce.ys b/tests/various/wreduce.ys
index 4257292f5..d3a59c6e3 100644
--- a/tests/various/wreduce.ys
+++ b/tests/various/wreduce.ys
@@ -46,3 +46,35 @@ design -import gate -as gate
 
 miter -equiv -flatten -make_assert -make_outputs gold gate miter
 sat -verify -prove-asserts -show-ports miter
+
+##########
+
+# Testcase from: https://github.com/YosysHQ/yosys/commit/25680f6a078bb32f157bd580705656496717bafb
+design -reset
+read_verilog <<EOT
+module top(
+    input clk,
+    input rst,
+    input [2:0] a,
+    output [1:0] b
+);
+    reg [2:0] b_reg;
+    initial begin
+        b_reg <= 3'b0;
+    end
+
+    assign b = b_reg[1:0];
+    always @(posedge clk or posedge rst) begin
+        if(rst) begin
+            b_reg <= 3'b0;
+        end else begin
+            b_reg <= a;
+        end
+    end
+endmodule
+EOT
+
+proc
+wreduce
+
+select -assert-count 1 t:$adff r:ARST_VALUE=2'b00 %i
-- 
cgit v1.2.3


From d5e8c0e6d33de71493855eca72fcc454a67a6140 Mon Sep 17 00:00:00 2001
From: Eddie Hung <eddie@fpgeh.com>
Date: Wed, 7 Aug 2019 21:33:56 -0700
Subject: Remove ice40_unlut call, simply do equiv_opt on synth_ice40

---
 tests/opt/opt_lut.ys | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'tests')

diff --git a/tests/opt/opt_lut.ys b/tests/opt/opt_lut.ys
index 59b12c351..a9fccbb62 100644
--- a/tests/opt/opt_lut.ys
+++ b/tests/opt/opt_lut.ys
@@ -1,4 +1,2 @@
 read_verilog opt_lut.v
-synth_ice40
-ice40_unlut
-equiv_opt -map +/ice40/cells_sim.v -assert opt_lut -dlogic SB_CARRY:I0=1:I1=2:CI=3
+equiv_opt -map +/ice40/cells_sim.v -assert synth_ice40
-- 
cgit v1.2.3


From 2b6cdfb39f9010861cb203809b295d1c36d58aa5 Mon Sep 17 00:00:00 2001
From: Eddie Hung <eddie@fpgeh.com>
Date: Wed, 7 Aug 2019 21:35:48 -0700
Subject: Move tests/various/opt* into tests/opt/

---
 tests/opt/opt_expr.ys      | 148 +++++++++++++++++++++++++++++++++++++++++++++
 tests/opt/opt_ff_sat.v     |  12 ----
 tests/opt/opt_ff_sat.ys    |   5 --
 tests/opt/opt_rmdff.v      |  50 +++++++++++++++
 tests/opt/opt_rmdff.ys     |  26 ++++++++
 tests/opt/opt_rmdff_sat.v  |  12 ++++
 tests/opt/opt_rmdff_sat.ys |   5 ++
 tests/various/opt_expr.ys  | 148 ---------------------------------------------
 tests/various/opt_rmdff.v  |  50 ---------------
 tests/various/opt_rmdff.ys |  26 --------
 10 files changed, 241 insertions(+), 241 deletions(-)
 create mode 100644 tests/opt/opt_expr.ys
 delete mode 100644 tests/opt/opt_ff_sat.v
 delete mode 100644 tests/opt/opt_ff_sat.ys
 create mode 100644 tests/opt/opt_rmdff.v
 create mode 100644 tests/opt/opt_rmdff.ys
 create mode 100644 tests/opt/opt_rmdff_sat.v
 create mode 100644 tests/opt/opt_rmdff_sat.ys
 delete mode 100644 tests/various/opt_expr.ys
 delete mode 100644 tests/various/opt_rmdff.v
 delete mode 100644 tests/various/opt_rmdff.ys

(limited to 'tests')

diff --git a/tests/opt/opt_expr.ys b/tests/opt/opt_expr.ys
new file mode 100644
index 000000000..0c61ac881
--- /dev/null
+++ b/tests/opt/opt_expr.ys
@@ -0,0 +1,148 @@
+
+read_verilog <<EOT
+module opt_expr_add_test(input [3:0] i, input [7:0] j, output [8:0] o);
+    assign o = (i << 4) + j;
+endmodule
+EOT
+
+hierarchy -auto-top
+proc
+design -save gold
+
+opt_expr -fine
+wreduce
+
+select -assert-count 1 t:$add r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports miter
+
+##########
+
+read_verilog <<EOT
+module opt_expr_add_signed_test(input signed [3:0] i, input signed [7:0] j, output signed [8:0] o);
+    assign o = (i << 4) + j;
+endmodule
+EOT
+
+hierarchy -auto-top
+proc
+design -save gold
+
+opt_expr -fine
+wreduce
+
+select -assert-count 1 t:$add r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports miter
+
+##########
+
+read_verilog <<EOT
+module opt_expr_sub_test1(input [3:0] i, input [7:0] j, output [8:0] o);
+    assign o = j - (i << 4);
+endmodule
+EOT
+
+hierarchy -auto-top
+proc
+design -save gold
+
+opt_expr -fine
+wreduce
+
+select -assert-count 1 t:$sub r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports miter
+
+##########
+
+read_verilog <<EOT
+module opt_expr_sub_signed_test1(input signed [3:0] i, input signed [7:0] j, output signed [8:0] o);
+    assign o = j - (i << 4);
+endmodule
+EOT
+
+hierarchy -auto-top
+proc
+design -save gold
+
+opt_expr -fine
+wreduce
+
+select -assert-count 1 t:$sub r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports miter
+
+##########
+
+read_verilog <<EOT
+module opt_expr_sub_test2(input [3:0] i, input [7:0] j, output [8:0] o);
+    assign o = (i << 4) - j;
+endmodule
+EOT
+
+hierarchy -auto-top
+proc
+design -save gold
+
+opt_expr -fine
+wreduce
+
+select -assert-count 1 t:$sub r:A_WIDTH=8 r:B_WIDTH=8 r:Y_WIDTH=9 %i %i %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports miter
+
+##########
+
+read_verilog <<EOT
+module opt_expr_sub_test4(input [3:0] i, output [8:0] o);
+    assign o = 5'b00010 - i;
+endmodule
+EOT
+
+hierarchy -auto-top
+proc
+design -save gold
+
+opt_expr -fine
+wreduce
+
+select -assert-count 1 t:$sub r:A_WIDTH=2 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports miter
diff --git a/tests/opt/opt_ff_sat.v b/tests/opt/opt_ff_sat.v
deleted file mode 100644
index 5a0a6fe37..000000000
--- a/tests/opt/opt_ff_sat.v
+++ /dev/null
@@ -1,12 +0,0 @@
-module top (
-	input clk,
-	output reg [7:0] cnt
-);
-	initial cnt = 0;
-	always @(posedge clk) begin
-		if (cnt < 20)
-			cnt <= cnt + 1;
-		else
-			cnt <= 0;
-	end
-endmodule
diff --git a/tests/opt/opt_ff_sat.ys b/tests/opt/opt_ff_sat.ys
deleted file mode 100644
index 4e7cc6ca4..000000000
--- a/tests/opt/opt_ff_sat.ys
+++ /dev/null
@@ -1,5 +0,0 @@
-read_verilog opt_ff_sat.v
-prep -flatten
-opt_rmdff -sat
-synth
-select -assert-count 5 t:$_DFF_P_
diff --git a/tests/opt/opt_rmdff.v b/tests/opt/opt_rmdff.v
new file mode 100644
index 000000000..b1c06703c
--- /dev/null
+++ b/tests/opt/opt_rmdff.v
@@ -0,0 +1,50 @@
+module opt_rmdff_test (input C, input D, input E, output [29:0] Q);
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove0 (.CLK(C), .D(D), .EN(1'b0), .Q(Q[0])); // EN is never active
+(* init = "1'b1" *) wire Q1; assign Q[1] = Q1;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove1 (.CLK(C), .D(D), .EN(1'b0), .Q(Q1)); // EN is never active
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove2 (.CLK(C), .D(D), .EN(1'bx), .Q(Q[2])); // EN is don't care
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep3 (.CLK(C), .D(D), .EN(1'b1), .Q(Q[3])); // EN is always active
+(* init = "1'b0" *) wire Q4; assign Q[4] = Q4;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(1)) keep4 (.CLK(C), .D(D), .EN(1'b1), .Q(Q4)); // EN is always active
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove5 (.CLK(C), .D(D), .EN(1'b1), .Q(Q[5])); // EN is never active
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove6 (.CLK(C), .D(D), .EN(1'bx), .Q(Q[6])); // EN is don't care
+(* init = "1'b0" *) wire Q7; assign Q[7] = Q7;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(0)) keep7 (.CLK(C), .D(D), .EN(E), .Q(Q7)); // EN is non constant
+
+\$_DFFE_PP_ remove8 (.C(C), .D(D), .E(1'b0), .Q(Q[8])); // EN is never active
+(* init = "1'b1" *) wire Q9; assign Q[9] = Q9;
+\$_DFFE_PP_ remove9 (.C(C), .D(D), .E(1'b0), .Q(Q9)); // EN is never active
+\$_DFFE_PP_ remove10 (.C(C), .D(D), .E(1'bx), .Q(Q[10])); // EN is don't care
+\$_DFFE_PP_ keep11 (.C(C), .D(D), .E(1'b1), .Q(Q[11])); // EN is always active
+(* init = "1'b0" *) wire Q12; assign Q[12] = Q12;
+\$_DFFE_PP_ keep12 (.C(C), .D(D), .E(1'b1), .Q(Q12)); // EN is always active
+
+\$_DFFE_NN_ remove13 (.C(C), .D(D), .E(1'b1), .Q(Q[13])); // EN is never active
+(* init = "1'b1" *) wire Q14; assign Q[14] = Q14;
+\$_DFFE_NN_ remove14 (.C(C), .D(D), .E(1'b1), .Q(Q14)); // EN is never active
+\$_DFFE_NN_ remove15 (.C(C), .D(D), .E(1'bx), .Q(Q[15])); // EN is don't care
+\$_DFFE_NN_ keep16 (.C(C), .D(D), .E(1'b0), .Q(Q[16])); // EN is always active
+(* init = "1'b0" *) wire Q17; assign Q[17] = Q17;
+\$_DFFE_NN_ keep17 (.C(C), .D(D), .E(1'b0), .Q(Q17)); // EN is always active
+
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove18 (.CLK(1'b0), .D(D), .EN(E), .Q(Q[18])); // CLK is constant
+(* init = "1'b1" *) wire Q19; assign Q[19] = Q19;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove19 (.CLK(1'b1), .D(D), .EN(E), .Q(Q19)); // CLK is constant
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove20 (.CLK(C), .D(1'bx), .EN(E), .Q(Q[20])); // D is undriven, Q has no initial value
+(* init = "1'b0" *) wire Q21; assign Q[21] = Q21;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep21 (.CLK(C), .D(1'bx), .EN(E), .Q(Q21)); // D is undriven, Q has initial value
+//\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(1)) remove22 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q[22])); // D is constant, no initial Q value, EN is always active
+//                                                                                                           // (TODO, Q starts with 1'bx and becomes 1'b0)
+(* init = "1'b0" *) wire Q23; assign Q[23] = Q23;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) noenable23 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q23)); // D is constant, initial Q value same as D, EN is always active
+(* init = "1'b1" *) wire Q24; assign Q[24] = Q24;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) keep24 (.CLK(C), .D(1'b0), .EN(1'b0), .Q(Q24)); // D is constant, initial Q value NOT same as D, EN is always active
+(* init = "1'b1" *) wire Q25; assign Q[25] = Q25;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove25 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q25)); // D is constant, EN is never active
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove26 (.CLK(C), .D(Q[26]), .EN(1'b1), .Q(Q[26])); // D is Q, EN is always active
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove27 (.CLK(C), .D(Q[27]), .EN(1'b1), .Q(Q[27])); // D is Q, EN is never active, but no initial value
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove28 (.CLK(C), .D(Q[28]), .EN(E), .Q(Q[28])); // EN is nonconst, but no initial value
+(* init = "1'b1" *) wire Q29; assign Q[29] = Q29;
+\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep29 (.CLK(C), .D(Q[29]), .EN(1'b1), .Q(Q29)); // EN is always active, but with initial value
+
+endmodule
diff --git a/tests/opt/opt_rmdff.ys b/tests/opt/opt_rmdff.ys
new file mode 100644
index 000000000..081f81782
--- /dev/null
+++ b/tests/opt/opt_rmdff.ys
@@ -0,0 +1,26 @@
+read_verilog -icells opt_rmdff.v
+prep
+design -stash gold
+read_verilog -icells opt_rmdff.v
+proc
+opt_rmdff
+
+select -assert-count 0 c:remove*
+select -assert-min 7 c:keep*
+select -assert-count 0  t:$dffe 7:$_DFFE_* %u c:noenable* %i
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+
+equiv_make gold gate equiv
+hierarchy -top equiv
+equiv_simple -undef
+equiv_status -assert
+
+design -load gold
+stat
+
+design -load gate
+stat
diff --git a/tests/opt/opt_rmdff_sat.v b/tests/opt/opt_rmdff_sat.v
new file mode 100644
index 000000000..5a0a6fe37
--- /dev/null
+++ b/tests/opt/opt_rmdff_sat.v
@@ -0,0 +1,12 @@
+module top (
+	input clk,
+	output reg [7:0] cnt
+);
+	initial cnt = 0;
+	always @(posedge clk) begin
+		if (cnt < 20)
+			cnt <= cnt + 1;
+		else
+			cnt <= 0;
+	end
+endmodule
diff --git a/tests/opt/opt_rmdff_sat.ys b/tests/opt/opt_rmdff_sat.ys
new file mode 100644
index 000000000..1c3dd9c05
--- /dev/null
+++ b/tests/opt/opt_rmdff_sat.ys
@@ -0,0 +1,5 @@
+read_verilog opt_rmdff_sat.v
+prep -flatten
+opt_rmdff -sat
+synth
+select -assert-count 5 t:$_DFF_P_
diff --git a/tests/various/opt_expr.ys b/tests/various/opt_expr.ys
deleted file mode 100644
index 0c61ac881..000000000
--- a/tests/various/opt_expr.ys
+++ /dev/null
@@ -1,148 +0,0 @@
-
-read_verilog <<EOT
-module opt_expr_add_test(input [3:0] i, input [7:0] j, output [8:0] o);
-    assign o = (i << 4) + j;
-endmodule
-EOT
-
-hierarchy -auto-top
-proc
-design -save gold
-
-opt_expr -fine
-wreduce
-
-select -assert-count 1 t:$add r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -show-ports miter
-
-##########
-
-read_verilog <<EOT
-module opt_expr_add_signed_test(input signed [3:0] i, input signed [7:0] j, output signed [8:0] o);
-    assign o = (i << 4) + j;
-endmodule
-EOT
-
-hierarchy -auto-top
-proc
-design -save gold
-
-opt_expr -fine
-wreduce
-
-select -assert-count 1 t:$add r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -show-ports miter
-
-##########
-
-read_verilog <<EOT
-module opt_expr_sub_test1(input [3:0] i, input [7:0] j, output [8:0] o);
-    assign o = j - (i << 4);
-endmodule
-EOT
-
-hierarchy -auto-top
-proc
-design -save gold
-
-opt_expr -fine
-wreduce
-
-select -assert-count 1 t:$sub r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -show-ports miter
-
-##########
-
-read_verilog <<EOT
-module opt_expr_sub_signed_test1(input signed [3:0] i, input signed [7:0] j, output signed [8:0] o);
-    assign o = j - (i << 4);
-endmodule
-EOT
-
-hierarchy -auto-top
-proc
-design -save gold
-
-opt_expr -fine
-wreduce
-
-select -assert-count 1 t:$sub r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -show-ports miter
-
-##########
-
-read_verilog <<EOT
-module opt_expr_sub_test2(input [3:0] i, input [7:0] j, output [8:0] o);
-    assign o = (i << 4) - j;
-endmodule
-EOT
-
-hierarchy -auto-top
-proc
-design -save gold
-
-opt_expr -fine
-wreduce
-
-select -assert-count 1 t:$sub r:A_WIDTH=8 r:B_WIDTH=8 r:Y_WIDTH=9 %i %i %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -show-ports miter
-
-##########
-
-read_verilog <<EOT
-module opt_expr_sub_test4(input [3:0] i, output [8:0] o);
-    assign o = 5'b00010 - i;
-endmodule
-EOT
-
-hierarchy -auto-top
-proc
-design -save gold
-
-opt_expr -fine
-wreduce
-
-select -assert-count 1 t:$sub r:A_WIDTH=2 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -show-ports miter
diff --git a/tests/various/opt_rmdff.v b/tests/various/opt_rmdff.v
deleted file mode 100644
index b1c06703c..000000000
--- a/tests/various/opt_rmdff.v
+++ /dev/null
@@ -1,50 +0,0 @@
-module opt_rmdff_test (input C, input D, input E, output [29:0] Q);
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove0 (.CLK(C), .D(D), .EN(1'b0), .Q(Q[0])); // EN is never active
-(* init = "1'b1" *) wire Q1; assign Q[1] = Q1;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove1 (.CLK(C), .D(D), .EN(1'b0), .Q(Q1)); // EN is never active
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove2 (.CLK(C), .D(D), .EN(1'bx), .Q(Q[2])); // EN is don't care
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep3 (.CLK(C), .D(D), .EN(1'b1), .Q(Q[3])); // EN is always active
-(* init = "1'b0" *) wire Q4; assign Q[4] = Q4;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(1)) keep4 (.CLK(C), .D(D), .EN(1'b1), .Q(Q4)); // EN is always active
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove5 (.CLK(C), .D(D), .EN(1'b1), .Q(Q[5])); // EN is never active
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove6 (.CLK(C), .D(D), .EN(1'bx), .Q(Q[6])); // EN is don't care
-(* init = "1'b0" *) wire Q7; assign Q[7] = Q7;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(0)) keep7 (.CLK(C), .D(D), .EN(E), .Q(Q7)); // EN is non constant
-
-\$_DFFE_PP_ remove8 (.C(C), .D(D), .E(1'b0), .Q(Q[8])); // EN is never active
-(* init = "1'b1" *) wire Q9; assign Q[9] = Q9;
-\$_DFFE_PP_ remove9 (.C(C), .D(D), .E(1'b0), .Q(Q9)); // EN is never active
-\$_DFFE_PP_ remove10 (.C(C), .D(D), .E(1'bx), .Q(Q[10])); // EN is don't care
-\$_DFFE_PP_ keep11 (.C(C), .D(D), .E(1'b1), .Q(Q[11])); // EN is always active
-(* init = "1'b0" *) wire Q12; assign Q[12] = Q12;
-\$_DFFE_PP_ keep12 (.C(C), .D(D), .E(1'b1), .Q(Q12)); // EN is always active
-
-\$_DFFE_NN_ remove13 (.C(C), .D(D), .E(1'b1), .Q(Q[13])); // EN is never active
-(* init = "1'b1" *) wire Q14; assign Q[14] = Q14;
-\$_DFFE_NN_ remove14 (.C(C), .D(D), .E(1'b1), .Q(Q14)); // EN is never active
-\$_DFFE_NN_ remove15 (.C(C), .D(D), .E(1'bx), .Q(Q[15])); // EN is don't care
-\$_DFFE_NN_ keep16 (.C(C), .D(D), .E(1'b0), .Q(Q[16])); // EN is always active
-(* init = "1'b0" *) wire Q17; assign Q[17] = Q17;
-\$_DFFE_NN_ keep17 (.C(C), .D(D), .E(1'b0), .Q(Q17)); // EN is always active
-
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove18 (.CLK(1'b0), .D(D), .EN(E), .Q(Q[18])); // CLK is constant
-(* init = "1'b1" *) wire Q19; assign Q[19] = Q19;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove19 (.CLK(1'b1), .D(D), .EN(E), .Q(Q19)); // CLK is constant
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove20 (.CLK(C), .D(1'bx), .EN(E), .Q(Q[20])); // D is undriven, Q has no initial value
-(* init = "1'b0" *) wire Q21; assign Q[21] = Q21;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep21 (.CLK(C), .D(1'bx), .EN(E), .Q(Q21)); // D is undriven, Q has initial value
-//\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(1)) remove22 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q[22])); // D is constant, no initial Q value, EN is always active
-//                                                                                                           // (TODO, Q starts with 1'bx and becomes 1'b0)
-(* init = "1'b0" *) wire Q23; assign Q[23] = Q23;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) noenable23 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q23)); // D is constant, initial Q value same as D, EN is always active
-(* init = "1'b1" *) wire Q24; assign Q[24] = Q24;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) keep24 (.CLK(C), .D(1'b0), .EN(1'b0), .Q(Q24)); // D is constant, initial Q value NOT same as D, EN is always active
-(* init = "1'b1" *) wire Q25; assign Q[25] = Q25;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove25 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q25)); // D is constant, EN is never active
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove26 (.CLK(C), .D(Q[26]), .EN(1'b1), .Q(Q[26])); // D is Q, EN is always active
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove27 (.CLK(C), .D(Q[27]), .EN(1'b1), .Q(Q[27])); // D is Q, EN is never active, but no initial value
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove28 (.CLK(C), .D(Q[28]), .EN(E), .Q(Q[28])); // EN is nonconst, but no initial value
-(* init = "1'b1" *) wire Q29; assign Q[29] = Q29;
-\$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep29 (.CLK(C), .D(Q[29]), .EN(1'b1), .Q(Q29)); // EN is always active, but with initial value
-
-endmodule
diff --git a/tests/various/opt_rmdff.ys b/tests/various/opt_rmdff.ys
deleted file mode 100644
index 081f81782..000000000
--- a/tests/various/opt_rmdff.ys
+++ /dev/null
@@ -1,26 +0,0 @@
-read_verilog -icells opt_rmdff.v
-prep
-design -stash gold
-read_verilog -icells opt_rmdff.v
-proc
-opt_rmdff
-
-select -assert-count 0 c:remove*
-select -assert-min 7 c:keep*
-select -assert-count 0  t:$dffe 7:$_DFFE_* %u c:noenable* %i
-
-design -stash gate
-
-design -import gold -as gold
-design -import gate -as gate
-
-equiv_make gold gate equiv
-hierarchy -top equiv
-equiv_simple -undef
-equiv_status -assert
-
-design -load gold
-stat
-
-design -load gate
-stat
-- 
cgit v1.2.3


From 8bf45f34c4d7143c58acde2544603cde443ad142 Mon Sep 17 00:00:00 2001
From: Eddie Hung <eddie@fpgeh.com>
Date: Wed, 7 Aug 2019 21:36:02 -0700
Subject: Remove dump call

---
 tests/various/wreduce.ys | 1 -
 1 file changed, 1 deletion(-)

(limited to 'tests')

diff --git a/tests/various/wreduce.ys b/tests/various/wreduce.ys
index d3a59c6e3..2e0812c48 100644
--- a/tests/various/wreduce.ys
+++ b/tests/various/wreduce.ys
@@ -36,7 +36,6 @@ design -save gold
 opt_expr
 wreduce
 
-dump
 select -assert-count 1 t:$sub r:A_WIDTH=4 r:B_WIDTH=4 r:Y_WIDTH=5 %i %i %i
 
 design -stash gate
-- 
cgit v1.2.3