diff options
Diffstat (limited to 'techlibs/intel/cyclonev/cells_sim.v')
| -rwxr-xr-x | techlibs/intel/cyclonev/cells_sim.v | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/techlibs/intel/cyclonev/cells_sim.v b/techlibs/intel/cyclonev/cells_sim.v new file mode 100755 index 000000000..363310e54 --- /dev/null +++ b/techlibs/intel/cyclonev/cells_sim.v @@ -0,0 +1,144 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera Cyclone V devices Input Buffer Primitive */ +module cyclonev_io_ibuf + (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // cyclonev_io_ibuf + +/* Altera Cyclone V devices Output Buffer Primitive */ +module cyclonev_io_obuf + (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // cyclonev_io_obuf + +/* Altera Cyclone V LUT Primitive */ +module cyclonev_lcell_comb + (output combout, cout, sumout, shareout, + input dataa, datab, datac, datad, + input datae, dataf, datag, cin, + input sharein); + + parameter lut_mask = 64'hFFFFFFFFFFFFFFFF; + parameter dont_touch = "off"; + parameter lpm_type = "cyclonev_lcell_comb"; + parameter shared_arith = "off"; + parameter extended_lut = "off"; + + // Internal variables + // Sub mask for fragmented LUTs + wire [15:0] mask_a, mask_b, mask_c, mask_d; + // Independant output for fragmented LUTs + wire output_0, output_1, output_2, output_3; + // Extended mode uses mux to define the output + wire mux_0, mux_1; + // Input for hold the shared LUT mode value + wire shared_lut_alm; + + // Simulation model of 4-input LUT + function lut4; + input [15:0] mask; + input dataa, datab, datac, datad; + reg [7:0] s3; + reg [3:0] s2; + reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut4 = dataa ? s1[1] : s1[0]; + end + endfunction // lut4 + + // Simulation model of 5-input LUT + function lut5; + input [31:0] mask; // wp-01003.pdf, page 3: "a 5-LUT can be built with two 4-LUTs and a multiplexer. + input dataa, datab, datac, datad, datae; + reg upper_lut_value; + reg lower_lut_value; + begin + upper_lut_value = lut4(mask[31:16], dataa, datab, datac, datad); + lower_lut_value = lut4(mask[15:0], dataa, datab, datac, datad); + lut5 = (datae) ? upper_mask_value : lower_mask_value; + end + endfunction // lut5 + + // Simulation model of 6-input LUT + function lut6; + input [63:0] mask; + input dataa, datab, datac, datad, datae, dataf; + reg upper_lut_value; + reg lower_lut_value; + begin + upper_lut_value = lut5(mask[63:32], dataa, datab, datac, datad, datae); + lower_lut_value = lut5(mask[31:0], dataa, datab, datac, datad, datae); + lut6 = (dataf) ? upper_mask_value : lower_mask_value; + end + endfunction // lut6 + + assign {mask_a, mask_b, mask_c, mask_d} = {lut_mask[15:0], lut_mask[31:16], lut_mask[47:32], lut_mask[63:48]}; + + always @(*) begin + if(extended_lut == "on") + shared_lut_alm = datag; + else + shared_lut_alm = datac; + // Build the ALM behaviour + out_0 = lut4(mask_a, dataa, datab, datac, datad); + out_1 = lut4(mask_b, dataa, datab, shared_lut_alm, datad); + out_2 = lut4(mask_c, dataa, datab, datac, datad); + out_3 = lut4(mask_d, dataa, datab, shared_lut_alm, datad); + end +endmodule // cyclonev_lcell_comb + + +/* Altera D Flip-Flop Primitive */ +module dffeas + (output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload); + + // Timing simulation is not covered + parameter power_up="dontcare"; + parameter is_wysiwyg="false"; + + reg q_tmp; + wire reset; + reg [7:0] debug_net; + + assign reset = (prn && sclr && ~clrn && ena); + assign q = q_tmp & 1'b1; + + always @(posedge clk, posedge aload) begin + if(reset) q_tmp <= 0; + else q_tmp <= d; + end + assign q = q_tmp; + +endmodule // dffeas |