aboutsummaryrefslogtreecommitdiffstats
path: root/examples/intel
diff options
context:
space:
mode:
Diffstat (limited to 'examples/intel')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-01 20:53:48 +0000
d='n61' href='#n61'>61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 
/*
    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    hal_uart.c
 * @brief   UART Driver code.
 *
 * @addtogroup UART
 * @{
 */

#include "hal.h"

#if (HAL_USE_UART == TRUE) || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver local definitions.                                                 */
/*===========================================================================*/

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local variables and types.                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/

/*===========================================================================*/
/* Driver exported functions.                                                */
/*===========================================================================*/

/**
 * @brief   UART Driver initialization.
 * @note    This function is implicitly invoked by @p halInit(), there is
 *          no need to explicitly initialize the driver.
 *
 * @init
 */
void uartInit(void) {

  uart_lld_init();
}

/**
 * @brief   Initializes the standard part of a @p UARTDriver structure.
 *
 * @param[out] uartp    pointer to the @p UARTDriver object
 *
 * @init
 */
void uartObjectInit(UARTDriver *uartp) {

  uartp->state      = UART_STOP;
  uartp->txstate    = UART_TX_IDLE;
  uartp->rxstate    = UART_RX_IDLE;
  uartp->config     = NULL;
#if UART_USE_WAIT == TRUE
  uartp->early      = false;
  uartp->threadrx   = NULL;
  uartp->threadtx   = NULL;
#endif /* UART_USE_WAIT */
#if UART_USE_MUTUAL_EXCLUSION == TRUE
  osalMutexObjectInit(&uartp->mutex);
#endif /* UART_USE_MUTUAL_EXCLUSION */

  /* Optional, user-defined initializer.*/
#if defined(UART_DRIVER_EXT_INIT_HOOK)
  UART_DRIVER_EXT_INIT_HOOK(uartp);
#endif
}

/**
 * @brief   Configures and activates the UART peripheral.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in] config    pointer to the @p UARTConfig object
 *
 * @api
 */
void uartStart(UARTDriver *uartp, const UARTConfig *config) {

  osalDbgCheck((uartp != NULL) && (config != NULL));

  osalSysLock();
  osalDbgAssert((uartp->state == UART_STOP) || (uartp->state == UART_READY),
                "invalid state");

  uartp->config = config;
  uart_lld_start(uartp);
  uartp->state = UART_READY;
  osalSysUnlock();
}

/**
 * @brief   Deactivates the UART peripheral.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @api
 */
void uartStop(UARTDriver *uartp) {

  osalDbgCheck(uartp != NULL);

  osalSysLock();

  osalDbgAssert((uartp->state == UART_STOP) || (uartp->state == UART_READY),
                "invalid state");

  uart_lld_stop(uartp);
  uartp->config  = NULL;
  uartp->state   = UART_STOP;
  uartp->txstate = UART_TX_IDLE;
  uartp->rxstate = UART_RX_IDLE;

  osalSysUnlock();
}

/**
 * @brief   Starts a transmission on the UART peripheral.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in] n         number of data frames to send
 * @param[in] txbuf     the pointer to the transmit buffer
 *
 * @api
 */
void uartStartSend(UARTDriver *uartp, size_t n, const void *txbuf) {

  osalDbgCheck((uartp != NULL) && (n > 0U) && (txbuf != NULL));
             
  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->txstate != UART_TX_ACTIVE, "tx active");

  uart_lld_start_send(uartp, n, txbuf);
  uartp->txstate = UART_TX_ACTIVE;
  osalSysUnlock();
}

/**
 * @brief   Starts a transmission on the UART peripheral.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 * @note    This function has to be invoked from a lock zone.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in] n         number of data frames to send
 * @param[in] txbuf     the pointer to the transmit buffer
 *
 * @iclass
 */
void uartStartSendI(UARTDriver *uartp, size_t n, const void *txbuf) {

  osalDbgCheckClassI();
  osalDbgCheck((uartp != NULL) && (n > 0U) && (txbuf != NULL));
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->txstate != UART_TX_ACTIVE, "tx active");

  uart_lld_start_send(uartp, n, txbuf);
  uartp->txstate = UART_TX_ACTIVE;
}

/**
 * @brief   Stops any ongoing transmission.
 * @note    Stopping a transmission also suppresses the transmission callbacks.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @return              The number of data frames not transmitted by the
 *                      stopped transmit operation.
 * @retval 0            There was no transmit operation in progress.
 *
 * @api
 */
size_t uartStopSend(UARTDriver *uartp) {
  size_t n;

  osalDbgCheck(uartp != NULL);

  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "not active");

  if (uartp->txstate == UART_TX_ACTIVE) {
    n = uart_lld_stop_send(uartp);
    uartp->txstate = UART_TX_IDLE;
  }
  else {
    n = 0;
  }
  osalSysUnlock();

  return n;
}

/**
 * @brief   Stops any ongoing transmission.
 * @note    Stopping a transmission also suppresses the transmission callbacks.
 * @note    This function has to be invoked from a lock zone.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @return              The number of data frames not transmitted by the
 *                      stopped transmit operation.
 * @retval 0            There was no transmit operation in progress.
 *
 * @iclass
 */
size_t uartStopSendI(UARTDriver *uartp) {

  osalDbgCheckClassI();
  osalDbgCheck(uartp != NULL);
  osalDbgAssert(uartp->state == UART_READY, "not active");

  if (uartp->txstate == UART_TX_ACTIVE) {
    size_t n = uart_lld_stop_send(uartp);
    uartp->txstate = UART_TX_IDLE;
    return n;
  }
  return 0;
}

/**
 * @brief   Starts a receive operation on the UART peripheral.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in] n         number of data frames to receive
 * @param[in] rxbuf     the pointer to the receive buffer
 *
 * @api
 */
void uartStartReceive(UARTDriver *uartp, size_t n, void *rxbuf) {

  osalDbgCheck((uartp != NULL) && (n > 0U) && (rxbuf != NULL));

  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->rxstate != UART_RX_ACTIVE, "rx active");

  uart_lld_start_receive(uartp, n, rxbuf);
  uartp->rxstate = UART_RX_ACTIVE;
  osalSysUnlock();
}

/**
 * @brief   Starts a receive operation on the UART peripheral.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 * @note    This function has to be invoked from a lock zone.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in] n         number of data frames to receive
 * @param[out] rxbuf    the pointer to the receive buffer
 *
 * @iclass
 */
void uartStartReceiveI(UARTDriver *uartp, size_t n, void *rxbuf) {

  osalDbgCheckClassI();
  osalDbgCheck((uartp != NULL) && (n > 0U) && (rxbuf != NULL));
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->rxstate != UART_RX_ACTIVE, "rx active");

  uart_lld_start_receive(uartp, n, rxbuf);
  uartp->rxstate = UART_RX_ACTIVE;
}

/**
 * @brief   Stops any ongoing receive operation.
 * @note    Stopping a receive operation also suppresses the receive callbacks.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @return              The number of data frames not received by the
 *                      stopped receive operation.
 * @retval 0            There was no receive operation in progress.
 *
 * @api
 */
size_t uartStopReceive(UARTDriver *uartp) {
  size_t n;

  osalDbgCheck(uartp != NULL);

  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "not active");

  if (uartp->rxstate == UART_RX_ACTIVE) {
    n = uart_lld_stop_receive(uartp);
    uartp->rxstate = UART_RX_IDLE;
  }
  else {
    n = 0;
  }
  osalSysUnlock();

  return n;
}

/**
 * @brief   Stops any ongoing receive operation.
 * @note    Stopping a receive operation also suppresses the receive callbacks.
 * @note    This function has to be invoked from a lock zone.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @return              The number of data frames not received by the
 *                      stopped receive operation.
 * @retval 0            There was no receive operation in progress.
 *
 * @iclass
 */
size_t uartStopReceiveI(UARTDriver *uartp) {

  osalDbgCheckClassI();
  osalDbgCheck(uartp != NULL);
  osalDbgAssert(uartp->state == UART_READY, "not active");

  if (uartp->rxstate == UART_RX_ACTIVE) {
    size_t n = uart_lld_stop_receive(uartp);
    uartp->rxstate = UART_RX_IDLE;
    return n;
  }
  return 0;
}

#if (UART_USE_WAIT == TRUE) || defined(__DOXYGEN__)
/**
 * @brief   Performs a transmission on the UART peripheral.
 * @note    The function returns when the specified number of frames have been
 *          sent to the UART or on timeout.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 * @note    This function implements a software timeout, it does not use
 *          any underlying HW timeout mechanism.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in,out] np    number of data frames to transmit, on exit the number
 *                      of frames actually transmitted
 * @param[in] txbuf     the pointer to the transmit buffer
 * @param[in] timeout   operation timeout
 * @return              The operation status.
 * @retval MSG_OK       if the operation completed successfully.
 * @retval MSG_TIMEOUT  if the operation timed out.
 *
 * @api
 */
msg_t uartSendTimeout(UARTDriver *uartp, size_t *np,
                      const void *txbuf, sysinterval_t timeout) {
  msg_t msg;

  osalDbgCheck((uartp != NULL) && (*np > 0U) && (txbuf != NULL));

  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->txstate != UART_TX_ACTIVE, "tx active");

  /* Transmission start.*/
  uartp->early = true;
  uart_lld_start_send(uartp, *np, txbuf);
  uartp->txstate = UART_TX_ACTIVE;

  /* Waiting for result.*/
  msg = osalThreadSuspendTimeoutS(&uartp->threadtx, timeout);
  if (msg != MSG_OK) {
    *np -= uartStopSendI(uartp);
  }
  osalSysUnlock();

  return msg;
}

/**
 * @brief   Performs a transmission on the UART peripheral.
 * @note    The function returns when the specified number of frames have been
 *          physically transmitted or on timeout.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 * @note    This function implements a software timeout, it does not use
 *          any underlying HW timeout mechanism.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in,out] np    number of data frames to transmit, on exit the number
 *                      of frames actually transmitted
 * @param[in] txbuf     the pointer to the transmit buffer
 * @param[in] timeout   operation timeout
 * @return              The operation status.
 * @retval MSG_OK       if the operation completed successfully.
 * @retval MSG_TIMEOUT  if the operation timed out.
 *
 * @api
 */
msg_t uartSendFullTimeout(UARTDriver *uartp, size_t *np,
                          const void *txbuf, sysinterval_t timeout) {
  msg_t msg;

  osalDbgCheck((uartp != NULL) && (*np > 0U) && (txbuf != NULL));

  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->txstate != UART_TX_ACTIVE, "tx active");

  /* Transmission start.*/
  uartp->early = false;
  uart_lld_start_send(uartp, *np, txbuf);
  uartp->txstate = UART_TX_ACTIVE;

  /* Waiting for result.*/
  msg = osalThreadSuspendTimeoutS(&uartp->threadtx, timeout);
  if (msg != MSG_OK) {
    *np = uartStopSendI(uartp);
  }
  osalSysUnlock();

  return msg;
}

/**
 * @brief   Performs a receive operation on the UART peripheral.
 * @note    The function returns when the specified number of frames have been
 *          received or on error/timeout.
 * @note    The buffers are organized as uint8_t arrays for data sizes below
 *          or equal to 8 bits else it is organized as uint16_t arrays.
 * @note    This function implements a software timeout, it does not use
 *          any underlying HW timeout mechanism.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 * @param[in,out] np    number of data frames to receive, on exit the number
 *                      of frames actually received
 * @param[in] rxbuf     the pointer to the receive buffer
 * @param[in] timeout   operation timeout
 *
 * @return              The operation status.
 * @retval MSG_OK       if the operation completed successfully.
 * @retval MSG_TIMEOUT  if the operation timed out.
 * @retval MSG_RESET    in case of a receive error.
 *
 * @api
 */
msg_t uartReceiveTimeout(UARTDriver *uartp, size_t *np,
                         void *rxbuf, sysinterval_t timeout) {
  msg_t msg;

  osalDbgCheck((uartp != NULL) && (*np > 0U) && (rxbuf != NULL));

  osalSysLock();
  osalDbgAssert(uartp->state == UART_READY, "is active");
  osalDbgAssert(uartp->rxstate != UART_RX_ACTIVE, "rx active");

  /* Receive start.*/
  uart_lld_start_receive(uartp, *np, rxbuf);
  uartp->rxstate = UART_RX_ACTIVE;

  /* Waiting for result.*/
  msg = osalThreadSuspendTimeoutS(&uartp->threadrx, timeout);
  if (msg != MSG_OK) {
    *np -= uartStopReceiveI(uartp);
  }
  osalSysUnlock();

  return msg;
}
#endif

#if (UART_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__)
/**
 * @brief   Gains exclusive access to the UART bus.
 * @details This function tries to gain ownership to the UART bus, if the bus
 *          is already being used then the invoking thread is queued.
 * @pre     In order to use this function the option @p UART_USE_MUTUAL_EXCLUSION
 *          must be enabled.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @api
 */
void uartAcquireBus(UARTDriver *uartp) {

  osalDbgCheck(uartp != NULL);

  osalMutexLock(&uartp->mutex);
}

/**
 * @brief   Releases exclusive access to the UART bus.
 * @pre     In order to use this function the option @p UART_USE_MUTUAL_EXCLUSION
 *          must be enabled.
 *
 * @param[in] uartp     pointer to the @p UARTDriver object
 *
 * @api
 */
void uartReleaseBus(UARTDriver *uartp) {

  osalDbgCheck(uartp != NULL);

  osalMutexUnlock(&uartp->mutex);
}
#endif

#endif /* HAL_USE_UART == TRUE */

/** @} */