aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--cyclonev/arch.cc4
-rw-r--r--cyclonev/arch.h16
-rw-r--r--cyclonev/constids.inc5
-rw-r--r--cyclonev/lab.cc186
4 files changed, 207 insertions, 4 deletions
diff --git a/cyclonev/arch.cc b/cyclonev/arch.cc
index 64444695..f41eb10e 100644
--- a/cyclonev/arch.cc
+++ b/cyclonev/arch.cc
@@ -261,7 +261,7 @@ bool Arch::pack() { return true; }
bool Arch::place() { return true; }
bool Arch::route() { return true; }
-BelId Arch::add_bel(int x, int y, IdString name, IdString type, IdString bucket)
+BelId Arch::add_bel(int x, int y, IdString name, IdString type)
{
// TODO: nothing else is using this BelId system yet...
// TODO (tomorrow?): we probably want a belsByTile type arrangement, similar for wires and pips, for better spacial
@@ -274,7 +274,7 @@ BelId Arch::add_bel(int x, int y, IdString name, IdString type, IdString bucket)
auto &bel = bels[id];
bel.name = name;
bel.type = type;
- bel.bucket = bucket;
+ bel.bucket = type;
return id;
}
diff --git a/cyclonev/arch.h b/cyclonev/arch.h
index 1f545134..0614860d 100644
--- a/cyclonev/arch.h
+++ b/cyclonev/arch.h
@@ -49,6 +49,10 @@ struct ALMInfo
struct LABInfo
{
std::array<ALMInfo, 10> alms;
+ // Control set wires
+ std::array<WireId, 3> clk_wires, ena_wires;
+ std::array<WireId, 2> aclr_wires;
+ WireId sclr_wire, sload_wire;
// TODO: LAB configuration (control set etc)
};
@@ -74,7 +78,7 @@ struct BelInfo
uint32_t lab; // index into the list of LABs
uint8_t alm; // ALM index inside LAB
uint8_t idx; // LUT or FF index inside ALM
- } labData;
+ } lab_data;
};
};
@@ -304,12 +308,17 @@ struct Arch : BaseArch<ArchRanges>
// -------------------------------------------------
// Functions for device setup
- BelId add_bel(int x, int y, IdString name, IdString type, IdString bucket);
+ BelId add_bel(int x, int y, IdString name, IdString type);
WireId add_wire(int x, int y, IdString name, uint64_t flags = 0);
PipId add_pip(WireId src, WireId dst);
void add_bel_pin(BelId bel, IdString pin, PortType dir, WireId wire);
+ WireId get_port(CycloneV::block_type_t bt, int x, int y, int bi, CycloneV::port_type_t port, int pi = -1) const
+ {
+ return WireId(cyclonev->pnode_to_rnode(CycloneV::pnode(bt, x, y, port, bi, pi)));
+ }
+
void create_lab(int x, int y);
void create_gpio(int x, int y);
@@ -323,6 +332,9 @@ struct Arch : BaseArch<ArchRanges>
std::unordered_map<WireId, WireInfo> wires;
std::unordered_map<BelId, BelInfo> bels;
+ // List of LABs
+ std::vector<LABInfo> labs;
+
// WIP to link without failure
std::vector<BelPin> empty_belpin_list;
diff --git a/cyclonev/constids.inc b/cyclonev/constids.inc
index bb9fee55..a22bda47 100644
--- a/cyclonev/constids.inc
+++ b/cyclonev/constids.inc
@@ -36,6 +36,11 @@ X(SHAREIN)
X(COUT)
X(SHAREOUT)
+X(CARRY_START)
+X(SHARE_START)
+X(CARRY_END)
+X(SHARE_END)
+
X(MISTRAL_ALUT6)
X(MISTRAL_ALUT5)
X(MISTRAL_ALUT4)
diff --git a/cyclonev/lab.cc b/cyclonev/lab.cc
new file mode 100644
index 00000000..b464b88a
--- /dev/null
+++ b/cyclonev/lab.cc
@@ -0,0 +1,186 @@
+/*
+ * nextpnr -- Next Generation Place and Route
+ *
+ * Copyright (C) 2021 gatecat <gatecat@ds0.me>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "log.h"
+#include "nextpnr.h"
+
+NEXTPNR_NAMESPACE_BEGIN
+
+// This file contains functions related to our custom LAB structure, including creating the LAB bels; checking the
+// legality of LABs; and manipulating LUT inputs and equations
+namespace {
+static void create_alm(Arch *arch, int x, int y, int z, uint32_t lab_idx)
+{
+ auto &lab = arch->labs.at(lab_idx);
+ // Create the combinational part of ALMs.
+ // There are two of these, for the two LUT outputs, and these also contain the carry chain and associated logic
+ // Each one has all 8 ALM inputs as input pins. In many cases only a subset of these are used; depending on mode;
+ // and the bel-cell pin mappings are used to handle this post-placement without losing flexibility
+ for (int i = 0; i < 2; i++) {
+ // Carry/share wires are a bit tricky due to all the different permutations
+ WireId carry_in, share_in;
+ WireId carry_out, share_out;
+ if (z == 0 && i == 0) {
+ if (y == 0) {
+ // Base case
+ carry_in = arch->add_wire(x, y, id_CARRY_START);
+ share_in = arch->add_wire(x, y, id_CARRY_START);
+ } else {
+ // Output of last tile
+ carry_in = arch->add_wire(x, y - 1, id_COUT);
+ share_in = arch->add_wire(x, y - 1, id_SHAREOUT);
+ }
+ } else {
+ // Output from last combinational unit
+ carry_in = arch->add_wire(x, y, arch->id(stringf("CARRY[%d]", (z * 2 + i) - 1)));
+ share_in = arch->add_wire(x, y, arch->id(stringf("SHARE[%d]", (z * 2 + i) - 1)));
+ }
+ if (z == 9 && i == 1) {
+ carry_out = arch->add_wire(x, y, id_COUT);
+ share_out = arch->add_wire(x, y, id_SHAREOUT);
+ } else {
+ carry_out = arch->add_wire(x, y, arch->id(stringf("CARRY[%d]", z * 2 + i)));
+ share_out = arch->add_wire(x, y, arch->id(stringf("SHARE[%d]", z * 2 + i)));
+ }
+
+ BelId bel = arch->add_bel(x, y, arch->id(stringf("ALM%d_COMB%d", z, i)), id_MISTRAL_COMB);
+ // LUT/MUX inputs
+ arch->add_bel_pin(bel, id_A, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::A));
+ arch->add_bel_pin(bel, id_B, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::B));
+ arch->add_bel_pin(bel, id_C, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::C));
+ arch->add_bel_pin(bel, id_D, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::D));
+ arch->add_bel_pin(bel, id_E0, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::E0));
+ arch->add_bel_pin(bel, id_E1, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::E1));
+ arch->add_bel_pin(bel, id_F0, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::F0));
+ arch->add_bel_pin(bel, id_F1, PORT_IN, arch->get_port(CycloneV::LAB, x, y, z, CycloneV::F1));
+ // Carry/share chain
+ arch->add_bel_pin(bel, id_CIN, PORT_IN, carry_in);
+ arch->add_bel_pin(bel, id_SHAREIN, PORT_IN, share_in);
+ arch->add_bel_pin(bel, id_CIN, PORT_OUT, carry_in);
+ arch->add_bel_pin(bel, id_SHAREIN, PORT_OUT, share_out);
+ // Combinational output
+ WireId comb_out = arch->add_wire(x, y, arch->id(stringf("COMBOUT[%d]", z * 2 + i)));
+ arch->add_bel_pin(bel, id_COMBOUT, PORT_OUT, comb_out);
+ // Assign indexing
+ lab.alms.at(z).lut_bels.at(i) = bel;
+ arch->bels.at(bel).lab_data.lab = lab_idx;
+ arch->bels.at(bel).lab_data.alm = z;
+ arch->bels.at(bel).lab_data.idx = i;
+ }
+ // Create the control set and E/F selection - which is per pair of FF
+ std::array<WireId, 2> sel_clk, sel_ena, sel_aclr, sel_ef;
+ for (int i = 0; i < 2; i++) {
+ // Wires
+ sel_clk[i] = arch->add_wire(x, y, arch->id(stringf("CLK%c[%d]", i ? 'B' : 'T', z)));
+ sel_ena[i] = arch->add_wire(x, y, arch->id(stringf("ENA%c[%d]", i ? 'B' : 'T', z)));
+ sel_aclr[i] = arch->add_wire(x, y, arch->id(stringf("ACLR%c[%d]", i ? 'B' : 'T', z)));
+ sel_ef[i] = arch->add_wire(x, y, arch->id(stringf("%cEF[%d]", i ? 'B' : 'T', z)));
+ // Muxes - three CLK/ENA per LAB, two ACLR
+ for (int j = 0; j < 3; i++) {
+ arch->add_pip(lab.clk_wires[j], sel_clk[i]);
+ arch->add_pip(lab.ena_wires[j], sel_ena[i]);
+ if (j < 2)
+ arch->add_pip(lab.aclr_wires[j], sel_aclr[i]);
+ }
+ // E/F pips
+ arch->add_pip(arch->get_port(CycloneV::LAB, x, y, z, i ? CycloneV::E1 : CycloneV::E0), sel_ef[i]);
+ arch->add_pip(arch->get_port(CycloneV::LAB, x, y, z, i ? CycloneV::F1 : CycloneV::F0), sel_ef[i]);
+ }
+
+ // Create the flipflops and associated routing
+ const CycloneV::port_type_t outputs[4] = {CycloneV::FFT0, CycloneV::FFT1, CycloneV::FFB0, CycloneV::FFB1};
+ const CycloneV::port_type_t l_outputs[4] = {CycloneV::FFT1L, CycloneV::FFB1L};
+
+ for (int i = 0; i < 4; i++) {
+ // FF input, selected by *PKREG*
+ WireId comb_out = arch->add_wire(x, y, arch->id(stringf("COMBOUT[%d]", (z * 2) + (i / 2))));
+ WireId ff_in = arch->add_wire(x, y, arch->id(stringf("FFIN[%d]", (z * 4) + i)));
+ arch->add_pip(comb_out, ff_in);
+ arch->add_pip(sel_ef[i / 2], ff_in);
+ // FF bel
+ BelId bel = arch->add_bel(x, y, arch->id(stringf("ALM%d_FF%d", z, i)), id_MISTRAL_FF);
+ arch->add_bel_pin(bel, id_CLK, PORT_IN, sel_clk[i / 2]);
+ arch->add_bel_pin(bel, id_ENA, PORT_IN, sel_ena[i / 2]);
+ arch->add_bel_pin(bel, id_ACLR, PORT_IN, sel_aclr[i / 2]);
+ arch->add_bel_pin(bel, id_SCLR, PORT_IN, lab.sclr_wire);
+ arch->add_bel_pin(bel, id_SLOAD, PORT_IN, lab.sload_wire);
+ arch->add_bel_pin(bel, id_DATAIN, PORT_IN, ff_in);
+ arch->add_bel_pin(bel, id_SDATA, PORT_IN, sel_ef[i / 2]);
+
+ // FF output
+ WireId ff_out = arch->add_wire(x, y, arch->id(stringf("FFOUT[%d]", (z * 4) + i)));
+ arch->add_bel_pin(bel, id_Q, PORT_OUT, ff_out);
+ // Output mux (*DFF*)
+ WireId out = arch->get_port(CycloneV::LAB, x, y, z, outputs[i]);
+ arch->add_pip(ff_out, out);
+ arch->add_pip(comb_out, out);
+ // 'L' output mux where applicable
+ if (i == 1 || i == 3) {
+ WireId l_out = arch->get_port(CycloneV::LAB, x, y, z, l_outputs[i / 2]);
+ arch->add_pip(ff_out, l_out);
+ arch->add_pip(comb_out, l_out);
+ }
+
+ lab.alms.at(z).ff_bels.at(i) = bel;
+ arch->bels.at(bel).lab_data.lab = lab_idx;
+ arch->bels.at(bel).lab_data.alm = z;
+ arch->bels.at(bel).lab_data.idx = i;
+ }
+}
+} // namespace
+
+void Arch::create_lab(int x, int y)
+{
+ uint32_t lab_idx = labs.size();
+ labs.emplace_back();
+
+ auto &lab = labs.back();
+
+ // Create common control set configuration. This is actually a subset of what's possible, but errs on the side of
+ // caution due to incomplete documentation
+
+ // Clocks - hardcode to CLKA choices, as both CLKA and CLKB coming from general routing causes unexpected
+ // permutations
+ for (int i = 0; i < 3; i++) {
+ lab.clk_wires[i] = add_wire(x, y, id(stringf("CLK%d", i)));
+ add_pip(get_port(CycloneV::LAB, x, y, -1, CycloneV::CLKIN, 0), lab.clk_wires[i]); // dedicated routing
+ add_pip(get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 0), lab.clk_wires[i]); // general routing
+ }
+
+ // Enables - while it looks from the config like there are choices for these, it seems like EN0_SEL actually selects
+ // SCLR not ENA0 and EN1_SEL actually selects SLOAD?
+ lab.ena_wires[0] = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 2);
+ lab.ena_wires[1] = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 3);
+ lab.ena_wires[2] = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 0);
+
+ // ACLRs - only consider general routing for now
+ lab.aclr_wires[0] = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 3);
+ lab.aclr_wires[1] = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 2);
+
+ // SCLR and SLOAD - as above it seems like these might be selectable using the "EN*_SEL" bits but play it safe for
+ // now
+ lab.sclr_wire = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 3);
+ lab.sload_wire = get_port(CycloneV::LAB, x, y, -1, CycloneV::DATAIN, 1);
+
+ for (int i = 0; i < 10; i++) {
+ create_alm(this, x, y, i, lab_idx);
+ }
+}
+
+NEXTPNR_NAMESPACE_END \ No newline at end of file
generated by cgit v1.2.3 (git 2.25.1) at 2025-10-31 17:36:12 +0000