| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
| |
Change-Id: I68b14ade3eb82598e4388735b8618d8c607ff494
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17596
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch has been cherry-picked from various patches in the chromiumos
tree denoted below.
Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a
Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65
Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808
Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is
dedicated to supporting orginal Servo V1 functionality. The second,
residing at USB ID 0x18d1:5003 provides two other SPI interfaces on
port A and B respectively.
Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko:
- The clock divisor is set to '6', as this creates a 10MHz SPI clock,
which is the same SPI clock that the chromiumos branch produced.
- Add udev rule for Google servo boards to util/flashrom.rules.
- Add Google servo entry to manpage.
Corresponding to flashrom svn r1925.
Signed-off-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Hatim Kanchwala <hatim@hatimak.me>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Hatim Kanchwala <hatim@hatimak.me>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual
Initial patch from Jadran Puharic <jpuharic@gmail.com>.
Corresponding to flashrom svn r1781.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
http://www.goepel.com/en/jtagboundary-scan/hardware/picotap.html
This device is actually a JTAG adapter, but since it uses standard
FT2232 A interface pins, it can be easily used as SPI programmer
(tested it here successfully). PicoTAP supports only 5V output, so one
needs to reduce this to 3.3V in a same manner as DLP Design DLP-USB1232H, see
http://flashrom.org/FT2232SPI_Programmer#DLP_Design_DLP-USB1232H
for details.
The PicoTAP pin-out is as follows:
PicoTAP | SPI
---------+-------
TCK | SCLK
TMS | CS#
TDI | SO
TDO | SI
/TRST | -
GND | GND
+5V | VCC, HOLD# & WP# after 3.3V regulator
I managed to run PicoTAP in 10MHz, 15MHz and 30MHz modes (by forcing
DIVIDE_BY), against SST25VF016B SPI flash, read/write/erase all worked
fine (write seems somewhat slow).
Corresponding to flashrom svn r1453.
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Thanks to TIAO/DIYGADGET for sponsoring a test device!
This is an FTDI FT2232H based device which provides an easily accessible JTAG,
SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips
using flashrom.
http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html
http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#SPI_Connector_1
There are two SPI connectors (pin headers) on the board: SPI1, which is
connected to the FT2232H's A interface, and SPI2, which is connected to the
chip's B interface. Both can be used to flash SPI chips:
flashrom -p ft2232_spi:type=tumpa,port=A
flashrom -p ft2232_spi:type=tumpa,port=B
The default interface is A, so for SPI1 you can also just write:
flashrom -p ft2232_spi:type=tumpa
I tested all operations on both interfaces, everything works fine.
Corresponding to flashrom svn r1451.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the following missing USB devices:
- FIC OpenMoko Neo1973 Debug board (V2+)
- Olimex ARM-USB-OCD
- Olimex ARM-USB-OCD-H
- Olimex ARM-USB-TINY
- Olimex ARM-USB-TINY-H
Corresponding to flashrom svn r1340.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
This allows USB-based external programmers to be used by non-root users
(which are in the 'plugdev' group). The file is to be installed by the
distros into the proper place (not sure if this is distro-specific). On
Debian the file will end up in /etc/udev/rules.d/z60_flashrom.rules.
On some systems the 'plugdev' group might have to adapted to whatever
the respective distro uses.
The following devices are listed so far:
- Amontec JTAGkey(2)
- Buspirate
- Dediprog SF100
- DLP Design DLP-USB1232H
- FTDI FT4232H Mini-Module
Corresponding to flashrom svn r1110.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|