| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
| |
Change-Id: I553e7fb5028f35e14a3a81b3fa8903c1b321a223
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-on: https://review.coreboot.org/20509
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Large flash chips usually support special instructions to work with
4-bytes address directly from 3-bytes addressing mode and without
do switching to 4-bytes mode. There are 13h (4BA Read), 12h (4BA Program)
and 21h,5Ch,DCh (4BA Erase), correspondingly. However not all these
instructions are supported by all large flash chips. Some chips
support 13h only, some 13h,12h,21h and DCh, but not 5Ch. This depends
on the manufacturer of the chip.
This patch provides code to use direct 4-bytes addressing instructions.
This code should work but it tested partially only. My W25Q256FV has
support for 4BA_Read (13h), but doesn't have support 4BA_Program (12h)
and 4BA_Erase instructions. So, direct 4BA program and erase
should be tested after.
Patched files
-------------
chipdrivers.h
+ added functions declarations for spi4ba.c
flash.h
+ feature definitions added
flashchips.c
+ modified definition of Winbond W25Q256BV/W25Q256FV chips
flashrom.c
+ modified switch to 4-bytes addressing for direct-4BA instructions
spi4ba.h
+ definitions for 4-bytes addressing JEDEC commands
+ functions declarations from spi4ba.c (same as in chipdrivers.h, just to see)
spi4ba.c
+ functions for read/write/erase directly with 4-bytes address (from any mode)
Change-Id: Ib51bcc5de7826b30ad697fcbb9a5152bde2c2ac9
Signed-off-by: Boris Baykov <dev@borisbaykov.com>, Russia, Jan 2014
[clg: ported from
https://www.flashrom.org/pipermail/flashrom/2015-January/013198.html ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-on: https://review.coreboot.org/20508
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On some flash chips data with addresses more than 24-bit field
can address may be accessed by using Extended Address Register.
The register has 1-byte size and stores high byte of 32-bit address.
Then flash can be read from 3-bytes addressing mode with writing
high byte of address to this Register. By using this way we have
access to full memory of a chip. Some chips may support this method
only.
This patch provides code use Extended Address Register.
Patched files
-------------
chipdrivers.h
+ added functions declarations for spi4ba.c
flash.h
+ feature definitions added
flashrom.c
+ modified switch to 4-bytes addressing to support extended address register
spi4ba.h
+ definitions for 4-bytes addressing JEDEC commands
+ functions declarations from spi4ba.c (same as in chipdrivers.h, just to see)
spi4ba.c
+ functions for write Extended Address Register
+ functions for read/write/erase with Extended Address Register
Change-Id: I09a8aa11de2ca14901f142c67c83c4fa0def4e27
Signed-off-by: Boris Baykov <dev@borisbaykov.com>, Russia, Jan 2014
[clg: ported from
https://www.flashrom.org/pipermail/flashrom/2015-January/013200.html ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-on: https://review.coreboot.org/20507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
Fix some whitespace, and braces. Remove sector size from comments that I
could not verify.
Change-Id: I4faaa036fea744135fa37f405686fb9fd0882806
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
|
If flash chip is switched to 4-bytes addressing mode then all
read/erase/program instructions will be switched from 3-bytes mode
to 4-bytes mode. Then well known instructions like 03h (Read),
02h (Program) and 20h,52h,D8h (Erase) will become one byte longer
and accept 4-bytes address instead of 3-bytes.
This patch provides support for well known instructions in 4-bytes
addressing mode. Also here is the code to enter 4-bytes addressing
mode by execute the instruction B7h (Enter 4-bytes mode).
Patched files
-------------
chipdrivers.h
+ added functions declarations for spi4ba.c
flash.h
+ feature definitions added
Makefile
+ added spi4ba.c
Added files
-----------
spi4ba.h
+ definitions for 4-bytes addressing JEDEC commands
+ functions declarations from spi4ba.c (same as in chipdrivers.h, just to see)
spi4ba.c
+ functions for enter 4-bytes addressing mode
+ functions for read/write/erase in 4-bytes addressing mode
Change-Id: Ie72e2a89cd75fb4d09f48e81c4c1d927c317b7a7
Signed-off-by: Boris Baykov <dev@borisbaykov.com>, Russia, Jan 2014
[clg: ported from
https://www.flashrom.org/pipermail/flashrom/2015-January/013199.html ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-on: https://review.coreboot.org/20513
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
