aboutsummaryrefslogtreecommitdiffstats
path: root/flashrom.c
Commit message (Collapse)AuthorAgeFilesLines
...
* Refactor some CLI-relevant partsStefan Tauner2014-08-081-70/+0
| | | | | | | | | | | | | | | Begin to move functions that clearly belong to the (command line) user interface out of flashrom's core files like flashrom.c. - Refine messages within check_chip_supported(), rename it to print_chip_support_status() and move it to newly created cli_common.c. - Move flashbuses_to_text() to cli_common.c as well. - Move global verbosity variables to cli_output.c. Corresponding to flashrom svn r1841. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 21Stefan Tauner2014-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS F2A85-M Reported by various corebooters - ASUS M2N-MX SE Plus Reported by Antonio - ASUS P5LD2 Reported by François Revol - Lenovo ThinkPad T530 Reported and partially authored by Edward O'Callaghan - MSI MS-7502 (Medion MD8833) Reported by naq on IRC - Shuttle AB61 Reported by olofolleola4 - ZOTAC IONITX-F-E Reported by Bernardo Kuri Flash chips: - Atmel AT45DB021D to PREW (+PREW) Reported by The Raven - Atmel AT25F4096 to PREW (+PREW) Reported by 공준혁 - GigaDevice GD25Q16(B) to PREW (+PREW) Reported by luxflow@live.com using a GD25Q16BSIG - Catalyst CAT28F512 Mark erase and write as known bad (not implemented) Miscellaneous: - Various spelling corrections by Daniele Forsi. - Added and refined a bunch of chips originally investigated by Carl-Daniel. - Marked the ARM-USB-OCD-H programmer as tested (reported by Ruud Schramp). - Tiny other stuff. Corresponding to flashrom svn r1839. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add new programmer for SPI EEPROMs attached to Intel 82580 NICsRicardo Ribalda Delgado2014-07-281-0/+12
| | | | | | | | | | | | | | | | This patch lets you read and write the EEPROM on 82580-based gigabit NIC cards. So far it has been tested on copper NICs only, but other variants employing this controller should work too. It is a nice substitution for the official eeupdate tool. Speed is quite decent: less than 4 seconds for erases or writes of 32 kB. Corresponding to flashrom svn r1832. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename programmer registration functionsCarl-Daniel Hailfinger2014-07-191-13/+13
| | | | | | | | | | | | Register_programmer suggests that we register a programmer. However, that function registers a master for a given bus type, and a programmer may support multiple masters (e.g. SPI, FWH). Rename a few other functions to be more consistent. Corresponding to flashrom svn r1831. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Improve messages on failed erases with default verbosityStefan Tauner2014-07-131-2/+2
| | | | | | | | | | | | | | | | | | | | | Without this... Erasing and writing flash chip... ERASE FAILED at 0x00001000! Expected=0xff, Read=0xb4, failed byte count from 0x00000000-0x0000ffff: 0xef09 ERASE FAILED! Reading current flash chip contents... done. <loooooong break while the next eraser and writing is tried> Erase/write done. Verifying flash... VERIFIED. Even if there is not a long temporal pause, it is very confusing for the user to first see a failed erase, followed by a read, a done message and eventually the verification message. This patch inserts "Looking for another erase function." where there is just a silent pause above. Corresponding to flashrom svn r1827. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* EEPROM support: handle implicit eraseCarl-Daniel Hailfinger2014-06-161-0/+5
| | | | | | | | | | | Add support for EEPROMs with 1 byte granularity and implicit erase on write. flashrom will not try to erase before write on these chips. Explicitly requested erase with -E is done by writing 0xff. Corresponding to flashrom svn r1822. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add selfcheck_board_enables()Stefan Tauner2014-06-121-0/+4
| | | | | | | | | | | | Check for NULL termination of the array, that each board has the two main PCI ID sets defined, that coreboot vendor and model fields are either both set or unset, and that at least either an enable function or a max decode size is available. Corresponding to flashrom svn r1821. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Introduce helpers.cStefan Tauner2014-06-121-36/+0
| | | | | | | | | | Move some suitable functions there, add it to the Makefile, but leave the declarations in flash.h for now. Corresponding to flashrom svn r1819. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add IT8212F as programmerKyösti Mälkki2014-06-011-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | This PCI PATA controller can use 3V parallel flash up to 128 kB. My card was identified as: PCI 1283:8212, subsystem 1283:0001. and labelled as: Innovision Multimedia LTD. EIO ATA133 RAID (DM-8401 Ver A) This particular card did not require setting of any GPIO signals to enable flash writing. My card has Pm39LV512 in PLCC32 package without socket. Rebased by Stefan (automatic cleanup, some PCI changes, changed enable bit handling). Committed with test state NT because the rebased version was not tested on real hardware (yet). Corresponding to flashrom svn r1812. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add VIA VT6421A LPC programmer driverJonathan Kollasch2014-06-011-0/+12
| | | | | | | | | | | | | | | Due to the mysterious address handling of this chip the user can specify a base address with the offset parameter, e.g.: flashrom -p atavia:offset=0xFFF00000 Thanks to Idwer Vollering for his iterative testing of this code, as well as to Martijn Bastiaan who did the last tests before merging. Corresponding to flashrom svn r1809. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix various tiny problems in verify_range()Stefan Tauner2014-05-271-7/+8
| | | | | | | | | | | | | First of all, fix CID1130010: Resource leak as reported by Stefan Reinauer. Alternatively to Stefan's approach, just move the malloc() out of the scope. Additionally, get rid of an unnecessary exit(1) and correctly return -1 in all error cases as documented. Corresponding to flashrom svn r1800. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix selfcheck of various arraysStefan Tauner2014-05-261-33/+24
| | | | | | | | | | | | Stefan Reinauer has reported ridiculous NULL checks for arrays in our self_check function found by Coverity (CID1130005). This patch removes the useless checks but keeps and fixes the one responsible for the flashchips array by exporting the array size in a new constant. Corresponding to flashrom svn r1799. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add two new states to enum test_state and use it for flashchipsStefan Tauner2014-05-261-17/+36
| | | | | | | | | | | | | | | | | | | | | | | | The new enum test_state looks like this: enum test_state { OK = 0, NT = 1, /* Not tested */ BAD, /* Known to not work */ DEP, /* Support depends on configuration (e.g. Intel flash descriptor) */ NA, /* Not applicable (e.g. write support on ROM chips) */ }; The second new state 'NA' is introduced, among other things, to indicate the erase and write states of real ROMs correctly. This is also implemented by this patch and required to exchange the previous bit mask in struct flashchip with a new struct containing an enum test_state for each operation. The -L output is changed accordingly to print '-' in the case of an N/A state and the wiki output uses a new template producing a greyed out cell. Previous users of enum test_state are not affected by this change (yet). Corresponding to flashrom svn r1798. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine messages related to erase/write recoveryStefan Tauner2014-05-101-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | We are more verbose inside erase_and_write_flash() although it does not matter as much as at the end of the whole process in doit(). New output for the non-fatal (i.e. read-protected + successful recovery read) case: Reading old flash chip contents... done. Erasing and writing flash chip... spi_block_erase_d8 failed during command execution at address 0x8000 Reading current flash chip contents... done. spi_chip_erase_c7 failed during command execution FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! Corresponding to flashrom svn r1790. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add 'const' keyword to chip write and other function prototypesMark Marshall2014-05-091-11/+8
| | | | | | | | | | Corresponding to flashrom svn r1789. Inspired by and mostly based on a patch Signed-off-by: Mark Marshall <mark.marshall@omicron.at> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Remove programmer_shutdown() from doit()Stefan Tauner2014-05-071-8/+8
| | | | | | | | | | | | | Because the programmer initialization that has to be called way earlier and independently elsewhere, it does not make a lot of sense to deinit within doit(). Also, free the logfile name at the end of main() to catch more execution paths and because this moves it to the other cleanup instructions. Corresponding to flashrom svn r1788. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Make delay values unsignedStefan Tauner2014-05-021-1/+1
| | | | | | | | | | | | | | | There is no reason for negative delays in our use cases: - We don't need it (to work around any quirks). - sleep() (POSIX) uses an unsigned argument. - usleep() (POSIX) uses an unsigned argument. - Sleep() (Windows) uses an unsigned argument. Change all callees as well (without any complications). Corresponding to flashrom svn r1782. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* programmer_delay: filter 0 usec delaysUrja Rannikko2013-10-211-1/+2
| | | | | | | | | | We use 0 as delay value for some chips. Just skipping these here is the most elegant, maintainable solution. Corresponding to flashrom svn r1760. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* layout: Verify layout entries before building a new image using themStefan Tauner2013-09-231-3/+8
| | | | | | | | | | | | | | | | | This fixes a SEGFAULT if a layout entry is included that addresses memory outside the current chip's address range. flashrom will only abort if the offending region(s) is/are included else it will just warn. It will print warnings for regions with negative or zero-length address ranges and bail out after checking all of them. Also, abort for non-write operations if a layout file is given because there is no layout support for other operations yet. Corresponding to flashrom svn r1751. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add debug output to programmer_map_flash_region()Stefan Tauner2013-09-131-2/+4
| | | | | | | | | | While we don't expect addresses with more than 32 bits here, let's print the whole possible range for debugging anyway. Corresponding to flashrom svn r1743. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* libpayload: Remove file I/O.cNico Huber2013-08-301-0/+10
| | | | | | | | | | | Read_buf_from_file() and write_buf_to_file() use file streams which are not supported in libpayload. Corresponding to flashrom svn r1730. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Abort on unused programmer parametersCarl-Daniel Hailfinger2013-08-131-5/+15
| | | | | | | | | | | | | | | An unused programmer parameter is a sign that the user wanted to either do something not supported by the programmer or misspelled a parameter which may be essential for the given programmer. Aborting is the only safe choice. If the programmer parameter is unused because of an error during programmer init, aborting would have happened anyway due to that error. Corresponding to flashrom svn r1708. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix verification operationStefan Tauner2013-08-121-2/+5
| | | | | | | | | | | | | | | | | | | I broke this in r1702 where I enabled avoidance of the verification step if we did not modify anything in the erase/write step. The problem is that all_skipped is initialized to true and hence it would only ever verify if there have been changes noted in the erase/write step. This obviously breaks the verification operation (-v/--verify) because there we never enter the erase/write loop. The better alternative would be to enable (the implicit) verification in the write loop and not in cli_classic.c. This would require a bigger change due to the existance of dont_verify_it. Eventually this is the right thing to do but not so shortly before a release. Corresponding to flashrom svn r1707. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 18Stefan Tauner2013-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS C60M1-I http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html - ASUS P8H77-I http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - ASUS P8H77-M http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html - ASUS P8P67 LE (B2) http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html - Elitegroup GeForce6100PM-M2 (V3.0) http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html - GIGABYTE GA-P55A-UD7 http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html - MSI B75MA-E33 (MS-7808) http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - MSI H77MA-G43 (MS-7756) http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html - MSI KA780G (MS-7551) http://paste.flashrom.org/view.php?id=1617 - SAPPHIRE IPC-E350M1 Reported by xvilka on IRC - Supermicro X8DTG-D http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html NOT OK: - ASRock Fatal1ty Z77 Performance http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html - ASRock Z68 Extreme4 http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html - ASUS P8B75-M LE http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html - ASUS P8P67-M PRO http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html - ASUS P8Z68-V LE http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html - Intel DQ77MK http://paste.flashrom.org/view.php?id=1603 - Supermicro X9DRD-7LN4F http://paste.flashrom.org/view.php?id=1582 - Supermicro X9SCE-F http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html - Supermicro X9SCM-F http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html - Tyan S7066 http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html Chipsets: - Marked Intel B75 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - Marked Intel H77 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - Removed 10de:03e2 because it is apparently the MCP61 host bridge. It was reclassified to Host Bridge in the PCI device ID database and there is at least one report suggesting this configuration too: http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html - Added MCP89 which hopefully works with the code for previous versions. Thanks to James Laird for submitting this change. Tested flash chips: - Atmel AT25DF641(A) to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html - Atmel AT25F512 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html Also, change its ID according to Modification of PCN SC040401A: "There has been a change in the returned value of the Product Identification (RDID) command, the AT25F512A RDID code is 65h compared to 60h from the AT25F512 product." It seems to be quite likely that all AT25F512 are fully functional relabeled AT25F1024 chips. There are even some hints in the datasheet: in table 6 they stress that address pin 16 needs to be low under all circum- stances; while continuous reads can wrap around on the AT25F1024 the DS notes "For the AT25F512, the read command must be terminated when the highest address (00FFFF) is reached." OTOH the lock bit semantics are different, but this has not been tested thoroughly - Atmel AT25F512A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1569 - Eon EN25F05 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1571 - Macronix MX25L12805(D) to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html - Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P) Tested by Stefan Tauner - Micron/Numonyx/ST M25PX80 to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P) Tested by Stefan Tauner - SST SST25VF040B to PREW (+PREW) http://paste.flashrom.org/view.php?id=1574 - SST SST25VF040B.REMS to PREW (+EW) http://paste.flashrom.org/view.php?id=1575 - ST M25P05-A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1576 - ST M29W512B to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html - Winbond W25Q64.W to PREW (+PREW) Tested by the chromiumos guys. - Winbond W25Q128.V to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html - Winbond W25X20 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html Miscellaneous: - Add Lenovo X201 to the laptop whitelist. - Add chip IDs for the ESMT F25L..QA family. - Add chip IDs for a few Macronix MX25 models. - The list of flashchips is not sorted strictly alphabetically and should not be either. Refine the comment explaining the scheme on top of the list. - Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb). - Use z length modifier in (more) prints for size_t types. - Remove chips >16MB again because our current implementation of memory mapping the flash chip violates common rules by mapping a window as large as the chip. This leads to failing mmaps as can be seen here: http://paste.flashrom.org/view.php?id=1695 - Document spispeed parameter of linux_spi (and fix some leaks). - Rephrase the "multiple chips detected" message because it was confusing. - Skip verification step if the image is equal to the flash contents. - Tiny other stuff. Corresponding to flashrom svn r1702. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Uintptr_t-ify map_flash_region functionsStefan Tauner2013-07-171-2/+1
| | | | | | | | | | | | | | | | | | | Unsigned long is not the right type for manipulating pointer values. Since C99 there are suitable unsigned and signed types available, namely uintptr_t and intptr_t respectively. Use them in functions assigned to programmers' map_flash_region fields and their callers where applicable. This patch also changes the display width of all associated address values in physmap.c to 16/8 hex characters depending on the actual size by introducing a macro PRIxPTR_WIDTH and exploiting printf's * field width specifier. Corresponding to flashrom svn r1701. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Differentiate ultimate error messages depending on programmer usedStefan Tauner2013-07-151-18/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With every newly supported programmer the information regarding reboots on failures becomes more ridiculous. With this patch it is only shown when the internal programmer module was selected. Example outputs for external programmers: 1) non-fatal: […] Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x28, failed byte count from 0x00000000-0x0001ffff: 0x1fde7 ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! 2) fatal: […] Verifying flash... FAILED at 0x00000000! Expected=0x0f, Found=0xff, failed byte count from 0x00000000-0x0001ffff: 0x1fde6 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! Corresponding to flashrom svn r1699. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Various cross-platform fixesCarl-Daniel Hailfinger2013-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Improve compilation with libpayload (compiling flashrom.c and linking is still broken): - disable Ponyprog (which enforced serial.c compilation) - make errno available where it is needed Fix internal.c for non-x86 and enable cb parsing on ARM. Fix mingw builds by using its __USE_MINGW_ANSI_STDIO macro and gnu_printf definition for printf format style checking. See http://sourceforge.net/apps/trac/mingw-w64/wiki/gnu%20printf This requires inclusion of stdio.h in flash.h. Fix order of libraries in the Makefile: FEATURE_LIBS needs to come *after* PCILIBS in case ZLIB is needed by it. Corresponding to flashrom svn r1697. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Warn if we skipped all blocks while writingStefan Tauner2013-06-231-0/+5
| | | | | | | | | | | | | | | Quick hack to print a warning if we skip all blocks in a write process because they are already equal to the requested image. We want something like this to make users aware... and some developers who regularly fall for this too *coughcough*. There might be more elegant solutions for this... patches welcome. This does not work for erasing because we do that unconditionally. Corresponding to flashrom svn r1680. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Get rid of perror()Stefan Tauner2013-04-071-4/+5
| | | | | | | | | | It prints to stderr and that's not what we want necesserily; using msg_*err gives us more control. Corresponding to flashrom svn r1668. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine granularity handling in preparation of AT45DB series supportStefan Tauner2013-04-011-15/+49
| | | | | | | | | | | This adds a number of new granularitie and refines the handling of n-byte granularities by extracting the respective code into a helper function which reduces the pain of the above significantly. Corresponding to flashrom svn r1666. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add Altera USB-Blaster SPI programmerJames Laird2013-03-271-0/+12
| | | | | | | | | | | | | Adds support for the Altera USB-Blaster programming dongle in Active Serial (AS) mode. Tested on both original product and a clone dongle. Corresponding to flashrom svn r1658. Signed-off-by: James Laird <jhl@mafipulation.org> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Make write granularity a chip attributeStefan Tauner2013-03-031-2/+1
| | | | | | | Corresponding to flashrom svn r1651. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix building for MacOSXStefan Tauner2013-02-041-2/+2
| | | | | | | | | | | | | | | | | | - Add a new macro named IS_MACOSX to hwaccess.c and use it to enable iopl(). This was broken since r1638. This fix does *not* restore the very permissive concept where iopl() was activated in an #else branch that was inplace before r1638. - Make printing the image file's size in flashrom.c platform independent. Bonus: remove definitions of off64_t and lseek64 which are not necessary anymore for about 1000 commits. Thanks to SJ for reporting the issue and testing the solution. Corresponding to flashrom svn r1648. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 16Stefan Tauner2013-01-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Acer V75-M (used in IBM Aptiva 2170-G http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - ASRock 4CoreDual-VSTA with W39V040FB http://paste.flashrom.org/view.php?id=1446 - ASRock 775Dual-VSTA http://www.flashrom.org/pipermail/flashrom/2012-December/010294.html - ASRock E350M1/USB3 http://paste.flashrom.org/view.php?id=1465 - ASUS P5B-VM http://www.flashrom.org/pipermail/flashrom/2012-December/010351.html - ASUS SABERTOOTH 990FX R2.0 http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html - Elitegroup A928 (including a laptop whitelist board enable) http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html - EVGA 122-CK-NF68 Reported by Stephanie Daugherty on IRC http://paste.flashrom.org/view.php?id=1431 - GIGABYTE GA-A75M-UD2H Reported by Soul_keeper on IRC http://paste.flashrom.org/view.php?id=1490 - Intel D945GCNL Add board enable to override laptop detection too. http://www.flashrom.org/pipermail/flashrom/2012-December/010276.html - MSI G33M (MS-7357) http://www.flashrom.org/pipermail/flashrom/2012-October/010056.html - Shuttle FB61 http://www.flashrom.org/pipermail/flashrom/2012-November/010105.html - Tyan S4882 (Thunder K8QS Pro) Reported on IRC NOT OK: Alienware Aurora-R2 http://www.flashrom.org/pipermail/flashrom/2012-December/010225.html Biostar H61MU3 http://www.flashrom.org/pipermail/flashrom/2012-November/010144.html Dell OptiPlex 7010 http://paste.flashrom.org/view.php?id=1481 Intel DH67CL http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html Supermicro X9DRT-HF+ http://www.flashrom.org/pipermail/flashrom/2012-November/010155.html Supermicro X9DRW http://www.flashrom.org/pipermail/flashrom/2012-November/010150.html Tested flash chips: - Atmel AT25FS010 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1484 - Eon EN25F64 to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html - Spansion S25FL032A/P to PREW (+EW) http://paste.flashrom.org/view.php?id=1510 - ST M29F002T/NT to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - Winbond W25X10 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1486 Tested chipsets: - NVIDIA MCP78S http://www.flashrom.org/pipermail/flashrom/2012-November/010176.html - SiS 650 http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html Miscellaneous: - Typo in GA-X58A-UDR3 (correct is GA-X58A-UD3R). - Force 2-digit hex numbers in prints were it makes sense. - Share code between enable_flash_sis530() and enable_flash_sis540(). - Some SST 25 series chips support both WRSR enable commands... - S25FL032A and S25FL064A share the IDs with their P versions, so rename them. - Fix a few memleaks in serprog. - Dediprog uses UINT_MAX so include limits.h (fixes the Windows build of dediprog) - Add (another) hint regarding the mandatory -p parameter to the manpage to make Debian bug #690478 happy. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690478 - Fix whitespace issues. - On shutdown, reset count of registered programmers (by Nico Huber) - Fix atahpt.c shutdown. The order of pcidev_init, register_shutdown and rpci_write_* is important! Thanks to Roy for reporting the problem and testing the fix. Corresponding to flashrom svn r1640. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Constify parameters and globalsNico Huber2012-12-301-4/+4
| | | | | | | | | | | This makes some stuff const (partially to get a more convenient libflashrom interface). Corresponding to flashrom svn r1639. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify usbdev_status and pcidev_status into dev_entryStefan Tauner2012-12-271-12/+12
| | | | | | | | | | | | | | | | | | | Once upon a time usbdev_status was created for the ft2232 programmer. Its IDs are semantically different to pcidev_status because they indicate USB instead of PCI IDs, but apart from that both data structures are equal. This change makes life easier for everything involved in handling and printing the status of devices that is noted in those structures by combining them into dev_entry. It is still possible to distinguish between PCI and USB devices indirectly by using the struct programmer's type field. Also, add a programmer column to the PCI and USB devices lists. Corresponding to flashrom svn r1632. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor PCI and USB device status printingStefan Tauner2012-12-271-1/+64
| | | | | | | | | | | | | | | | | To be able to get rid of lots of #ifdefs and centralize programmer-specific data more... - introduce two new fields to struct programmer_entry, namely enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status or char *note). - use those fields to generate device listings in print.c and print_wiki.c. Bonus: add printing of USB devices to print_wiki.c and count supported PCI and USB devices. Corresponding to flashrom svn r1631. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add general programmer sanity checksStefan Tauner2012-12-261-1/+28
| | | | | | | | | And remove the completely unused vendor field. Corresponding to flashrom svn r1630. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix memleaks in cli_classic.cStefan Tauner2012-12-261-0/+1
| | | | | | | | | | | | | | | | | | | Frees the memory allocated for the following strings - log file name - layout file name - image file name - programmer parameter (and reset the associated global variable in flashrom.c) Also, free the flashchip structs allocated by probe_flash. The layout image names were not fixed due to the pending layout patches. These bugs were found thanks to valgrind. Corresponding to flashrom svn r1629. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Improve --help and friendsStefan Tauner2012-11-241-1/+0
| | | | | | | | | | More clear "variable" names, better explanation if no programmer is selected etc. Corresponding to flashrom svn r1624. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Do not read the flash chip twice in verification modeStefan Tauner2012-10-271-51/+41
| | | | | | | | | | | | | | | | | | Kyösti Mälkki noticed that we unnecessarily read the flash chip twice when called with --verify. The first one is the mandatory read before everything (to be able to detect the seriousness of errors), but the second one is not necessary because we can just use the former for the comparison. This introduces a small output change: previously we printed ERASE or VERIFY depending on the callee. This special case has been dropped because it is unnecessary to print it (and wrong for the verification function to need to know why it is verifying exactly). If an erase fails we mention that fact explicitly already, similar for verify. Corresponding to flashrom svn r1619. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 15Stefan Tauner2012-10-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Foxconn P55MX http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html Tested flash chips: - Eon EN25F64 to PR (+PR) http://paste.flashrom.org/view.php?id=1426 - Macronix MX25L1005 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html - Set SST39VF512 to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html Tested chipsets: - Z77 (only reading was really tested) Miscellaneous: - Fix ft2232_spi's parameter parsing. - Fix nicrealtek's init (always segfaulted since r1586 oops). - Add another T60 variant to the laptop whitelist. - Improve message shown when image file size does not match flash chip - Refine messages regarding the flash descriptor override strap according to the findings by Vladislav Bykov on his P55MX. - Fix the ID of EN25F64. - Demote and clarify debug message in serprog_delay(). - Minor other cleanups. Corresponding to flashrom svn r1613. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 14Stefan Tauner2012-09-211-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - ASUS M3A78-EH http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html - ASUS P2B-LS http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html - Biostar TA790GX A3+ http://paste.flashrom.org/view.php?id=1350 - ECS 848P-A7 http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html - GIGABYTE GA-G41MT-S2PT Reported on IRC - GIGABYTE GA-H77-D3H Reported and tested by Alexander Gordeev on IRC. - Gigabyte GA-X79-UD5 http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html - Shuttle FN78S http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - VIA EITX-3000 Reported on IRC by Tuju NOT OK: - Dell PowerEdge C6220 (0HYFFG) http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html - Foxconn Q45M http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html - MSI MS-7309 (K9N6SGM-V) http://www.flashrom.org/pipermail/flashrom/2012-August/009712.html - Supermicro X9QRi-F+ http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - ZOTAC H61-ITX WiFi (H61ITX-A-E) http://www.flashrom.org/pipermail/flashrom/2012-August/009649.html ASUS CUSL2-C has been tested to be working with the board enable once implemented for the TUSL2-C board. They seem to have the same PCI IDs as shown in the links below. Since only the CUSL2-C board enable has been tested yet, we distinguish the two by DMI strings. http://paste.flashrom.org/view.php?id=1393 http://www.flashrom.org/pipermail/flashrom/attachments/20091206/ddca2c6c/attachment-0002.eml Tested flash chips: - Set EMST F25L008A to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - Set GigaDevice GD25Q64 to PREW (+PREW) http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=9e8ef49b1f626c2197e131fba6c5b65c8af4eeea - Set Macronix MX25L12805 to P (+P) http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - Set SST SST49LF003A/B to PREW (+EW) http://paste.flashrom.org/view.php?id=467 - Set Winbond W49V002FA to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html Tested chipsets: - Intel X79 (0x1d41) http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html Board enables: - add ASUS P4P800-X Created by Idwer Vollering and tested by Mingsen Bao: http://paste.flashrom.org/view.php?id=467 - add DMI string to P4P800-VM Miscellaneous: - Add remaining Intel 7 series chipset (LPC) PCI IDs - Add generic SPI detection for chips from Winbond - Minor manpage changes - Minor other cleanups - Escape full stops after abbreviations in the manpage. - Add ICH9 and successors to spi_get_valid_read_addr Corresponding to flashrom svn r1601. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Realtek RTL8169Sergey Lichack2012-08-271-1/+0
| | | | | | | | | | | | | | And some cleanups including the removal of any left traces of the nicsmc1211 programmer. The RTL8169 still needs someone to test it, but it's good enough to be in the tree now. Corresponding to flashrom svn r1586. Signed-off-by: Sergey Lichack <shadowpilot34@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Mathias Krause <mathias.krause@secunet.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Some ISO C fixesCarl-Daniel Hailfinger2012-08-271-1/+1
| | | | | | | | | | | | | | | | | This patch just fixes a limited number of bits not conforming to c99 by using - __asm__ instead of just asm - {0} instead of {} for struct initialization - h_addr_list[0] instead of h_addr to access the host address in struct hostent - #include <strings.h> where needed (for ffs and strcasecmp) Based on a previous patch by Carl-Daniel. Corresponding to flashrom svn r1585. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Make struct flashchip a field in struct flashctx instead of a complete copyCarl-Daniel Hailfinger2012-08-251-93/+97
| | | | | | | | | | | | All the driver conversion work and cleanup has been done by Stefan. flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel. Corresponding to flashrom svn r1579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor the -p internal:mainboard handlingStefan Tauner2012-08-201-8/+12
| | | | | | | | | | | | | | | | This patch gets rid of some global variables and makes lots of bits along the code path that control the board enable execution more generic and clearer. From now on flashrom aborts on a few more occasions that should be safer for the user. For example it aborts if the enable function for the specified mainboard (enable) can not be found. Parts of the board_match_cbname refactoring were done by Carl-Daniel. Corresponding to flashrom svn r1577. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move show_id to where it belongsStefan Tauner2012-08-111-1/+1
| | | | | | | | | And remove the unused force parameter. Corresponding to flashrom svn r1569. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Portability fixes and cleanupsCarl-Daniel Hailfinger2012-08-091-6/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move Mac OS X IOKit/DirectHW availability checks in the Makefile from compiler check to pciutils check. Print the compiler error messages for feature detection. Add DOS libpci in the Makefile includes only if a PCI-based programmer was requested. Restrict mmap usage in ich_descriptors_tool to Unix style systems. Build ich_descriptors_tool with the correct .exe extension on DOS/Windows. Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner) Print the Windows version instead of "unknown machine" on Windows. Don't #define our own __DARWIN__, use the standard OS X detection method. Update the README. Add more generated files to svn:ignore Corresponding to flashrom svn r1567. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix missing #include hwaccess.hCarl-Daniel Hailfinger2012-08-071-1/+4
| | | | | | | | | | | | | | | In r1549 #include "hwaccess.h" was moved to individual drivers. Unfortunately, flashrom.c was forgotten. This caused flashrom to falsely report an unknown PCI library version and big-endianness on all platforms. Add #include "hwaccess.h". Explicitly check for __flashrom_BIG_ENDIAN__ Corresponding to flashrom svn r1562. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:19:48 +0000