| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1181.
Change the physmap* behaviour to use (void*)-1 as error code instead
of NULL. That way, 1:1 mapped memory can be supported properly
because (void*)0 is not a magic pointer anymore.
(void*)-1 on the other hand is a rather unlikely memory offset, so that
should be safe.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.
Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This should take care of picky Linux kernels which do not allow uncached
mappings to cached areas. Handle mapping failure gracefully (no forced
exit()) if the caller specifies it.
Such cached areas which can handle mapping failure are DMI tables and
coreboot tables. On failure we just ignore those tables. That is not
perfect, but a lot better than aborting flashrom due to an error in
nonessential functionality.
This should fix flashrom on a sizable number of machines where it
currently aborts early.
Yes, I could have exploited a Linux kernel bug to "solve" this, but
relying on such bugs is not exactly the best idea.
Corresponding to flashrom svn r889.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Vincent Pelletier <plr.vincent@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is not just for fun. We hit a real bug on BSD with the outl macros.
The macro variable tmp collided with the tmp from outer scope.
second revision, now also taking care of inb/inw/inl. While that shadowing
did not introduce bugs (yet), of course it breaks the build on BSD when
-Wshadow is enabled.
Corresponding to flashrom svn r860.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make various pieces of code conditional on support for internal
programming. Code shared between PCI device programmers and onboard
programming is now conditional as well.
It is now possible to build only with dummy support:
make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no
CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no
This allows building for a specific use case only, and it also
facilitates porting to a new architecture because it is possible to
focus on highlevel code only.
Note: Either internal or dummy programmer needs to be compiled in due to
the current behaviour of always picking a default programmer if -p is
not specified. Picking an arbitrary external programmer as default
wouldn't make sense.
Build and runtime tested in all 1024 possible build combinations. The
only failures are by design as mentioned above.
Corresponding to flashrom svn r797.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Serprog compilation is now controlled by a Makefile variable.
Replace munmap with physunmap where appropriate.
Corresponding to flashrom svn r671.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom tries to match these with board enable entries in its database.
If no such board enable entry exists because the board doesn't need one,
flashrom complains. Silence that complaint.
Corresponding to flashrom svn r668.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Slightly updated and
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|
|
|
|
|
|
|
|
|
| |
Build-tested on 32bit x86.
Corresponding to flashrom svn r521.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Author: raijin
Corresponding to flashrom svn r506.
Signed-off-by: Daniel McLellan <daniel.mclellan@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r429 and coreboot v2 svn r4117.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some bootloaders seem to overwrite memory starting at 0x600, thus destroying
the coreboot table integrity, rendering the table useless.
By moving the table to the high tables area (if it's activated), this problem
is fixed.
In order to move the table, a 40 bytes mini coreboot table with a single sub
table is placed at 0x500/0x530 that points to the real coreboot table. This is
comparable to the ACPI RSDT or the MP floating table.
This patch also adds "table forward" support to flashrom and nvramtool.
Corresponding to flashrom svn r421 and coreboot v2 svn r4012.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
|
| |
Through DirectIO from coresystems GmbH we now support Darwin/Mac OS X.
DirectIO is available at http://www.coresystems.de/en/directio
Corresponding to flashrom svn r399 and coreboot v2 svn r3905.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r397 and coreboot v2 svn r3903.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r395 and coreboot v2 svn r3900.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r394 and coreboot v2 svn r3899.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r386 and coreboot v2 svn r3890.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
Corresponding to flashrom svn r179 and coreboot v2 svn r3058.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
|