| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adds support for the Altera USB-Blaster programming dongle in Active
Serial (AS) mode. Tested on both original product and a clone dongle.
Corresponding to flashrom svn r1658.
Signed-off-by: James Laird <jhl@mafipulation.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested Mainboards:
OK:
- Acer V75-M (used in IBM Aptiva 2170-G
http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html
- ASRock 4CoreDual-VSTA with W39V040FB
http://paste.flashrom.org/view.php?id=1446
- ASRock 775Dual-VSTA
http://www.flashrom.org/pipermail/flashrom/2012-December/010294.html
- ASRock E350M1/USB3
http://paste.flashrom.org/view.php?id=1465
- ASUS P5B-VM
http://www.flashrom.org/pipermail/flashrom/2012-December/010351.html
- ASUS SABERTOOTH 990FX R2.0
http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html
- Elitegroup A928 (including a laptop whitelist board enable)
http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html
- EVGA 122-CK-NF68
Reported by Stephanie Daugherty on IRC
http://paste.flashrom.org/view.php?id=1431
- GIGABYTE GA-A75M-UD2H
Reported by Soul_keeper on IRC
http://paste.flashrom.org/view.php?id=1490
- Intel D945GCNL
Add board enable to override laptop detection too.
http://www.flashrom.org/pipermail/flashrom/2012-December/010276.html
- MSI G33M (MS-7357)
http://www.flashrom.org/pipermail/flashrom/2012-October/010056.html
- Shuttle FB61
http://www.flashrom.org/pipermail/flashrom/2012-November/010105.html
- Tyan S4882 (Thunder K8QS Pro)
Reported on IRC
NOT OK:
Alienware Aurora-R2
http://www.flashrom.org/pipermail/flashrom/2012-December/010225.html
Biostar H61MU3
http://www.flashrom.org/pipermail/flashrom/2012-November/010144.html
Dell OptiPlex 7010
http://paste.flashrom.org/view.php?id=1481
Intel DH67CL
http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html
Supermicro X9DRT-HF+
http://www.flashrom.org/pipermail/flashrom/2012-November/010155.html
Supermicro X9DRW
http://www.flashrom.org/pipermail/flashrom/2012-November/010150.html
Tested flash chips:
- Atmel AT25FS010 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1484
- Eon EN25F64 to PREW (+EW)
http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html
- Spansion S25FL032A/P to PREW (+EW)
http://paste.flashrom.org/view.php?id=1510
- ST M29F002T/NT to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html
- Winbond W25X10 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1486
Tested chipsets:
- NVIDIA MCP78S http://www.flashrom.org/pipermail/flashrom/2012-November/010176.html
- SiS 650 http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html
Miscellaneous:
- Typo in GA-X58A-UDR3 (correct is GA-X58A-UD3R).
- Force 2-digit hex numbers in prints were it makes sense.
- Share code between enable_flash_sis530() and enable_flash_sis540().
- Some SST 25 series chips support both WRSR enable commands...
- S25FL032A and S25FL064A share the IDs with their P versions, so rename them.
- Fix a few memleaks in serprog.
- Dediprog uses UINT_MAX so include limits.h (fixes the Windows build of dediprog)
- Add (another) hint regarding the mandatory -p parameter to the manpage
to make Debian bug #690478 happy.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690478
- Fix whitespace issues.
- On shutdown, reset count of registered programmers (by Nico Huber)
- Fix atahpt.c shutdown.
The order of pcidev_init, register_shutdown and rpci_write_* is important!
Thanks to Roy for reporting the problem and testing the fix.
Corresponding to flashrom svn r1640.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Move all functions related to SPI status registers to a new file
spi25_statusreg.c. This includes the generic as well as the
SST-specific functions from spi25.c and the chip-specific functions
from a25.c and at25.c.
- introduce helper functions
* spi_prettyprint_status_register_hex()
* spi_prettyprint_status_register_bpl()
* spi_prettyprint_status_register_plain()
Use the latter on every compatible flash chip that has no better printlock
function set and get rid of the implicit pretty printing in the SPI probing
functions.
- remove
* spi_prettyprint_status_register_common()
* spi_prettyprint_status_register_amic_a25lq032() because it can be fully
substituted with spi_prettyprint_status_register_amic_a25l032().
* spi_prettyprint_status_register() (old switch, no longer needed)
- promote and export
* spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1().
* spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2().
* spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3().
- add #define TEST_BAD_REW and use it for a number of Atmel chips which
had only TEST_BAD_READ set even though they dont have erasers or a write
function set.
Corresponding to flashrom svn r1634.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
| |
Spotted by Idwer Vollering.
Corresponding to flashrom svn r1625.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Avoid funny interactions between libpci and libusb detection.
Leave libftdi autodetection alone for now.
Corresponding to flashrom svn r1623.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
| |
For older versions of libftdi we define TYPE_232H ourselves and this
seems to be enough to get at least basic support (and we don't need
more than that AFAICT).
Corresponding to flashrom svn r1609.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
Heavily influenced by a discussion with (and based on code from) Peter Stuge.
Please read the comment in the Makefile before using this option.
Corresponding to flashrom svn r1607.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The user may know better which CFLAGS/CPPFLAGS are appropriate.
Use flashrom_CFLAGS for flags which flashrom definitely needs to build.
Thanks to Stefan Tauner for pointing out the flaw in r1574.
Corresponding to flashrom svn r1575.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GNU make has a very interesting quirk: If you set a variable on the
command line, any changes to that variable in the Makefile are ignored
unless marked with the "override" keyword.
Use CFLAGS only for optimization and warning options, and use CPPFLAGS
for the dependency and other preprocessor related options.
That way packagers can specify their own CFLAGS without breaking the
build.
As a side benefit, the ich_descriptors_tool Makefile now behaves exactly
the same whether called standalone or as part of the main Makefile.
Corresponding to flashrom svn r1574.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move Mac OS X IOKit/DirectHW availability checks in the Makefile from
compiler check to pciutils check.
Print the compiler error messages for feature detection.
Add DOS libpci in the Makefile includes only if a PCI-based programmer
was requested.
Restrict mmap usage in ich_descriptors_tool to Unix style systems.
Build ich_descriptors_tool with the correct .exe extension on
DOS/Windows.
Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner)
Print the Windows version instead of "unknown machine" on Windows.
Don't #define our own __DARWIN__, use the standard OS X detection
method.
Update the README.
Add more generated files to svn:ignore
Corresponding to flashrom svn r1567.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1563.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1558.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested Mainboards:
OK:
- ASRock A780FullHD
http://www.flashrom.org/pipermail/flashrom/2012-July/009599.html
- ASRock 880G Pro3
http://www.flashrom.org/pipermail/flashrom/2012-July/009492.html
- ASRock N61P-S
http://www.flashrom.org/pipermail/flashrom/2012-May/009316.html
- ASUS M2N68-VM
http://www.flashrom.org/pipermail/flashrom/2012-May/009334.html
- ASUS M3N78 PRO
http://www.flashrom.org/pipermail/flashrom/2012-July/009519.html
- ASUS M4N68T V2
http://www.flashrom.org/pipermail/flashrom/2012-May/009277.html
- ASUS M5A78L-M LX
reported by clavile on IRC
- ASUS P8P67 PRO (rev. 3.0)
http://www.flashrom.org/pipermail/flashrom/2012-April/009188.html
- ASUS P8Z68-V
reported by Kano on IRC
http://paste.flashrom.org/view.php?id=1232
- ASUS SABERTOOTH 990FX
http://paste.flashrom.org/view.php?id=1214
- Dell Inspiron 1420
http://www.flashrom.org/pipermail/flashrom/2012-May/009196.html
- ECS GF8200A
http://www.flashrom.org/pipermail/flashrom/2012-May/009256.html
- GIGABYTE GA-H61M-D2H-USB3
http://www.flashrom.org/pipermail/flashrom/2012-May/009333.html
- MSI MS-7250 (K9N SLI (rev 2.1))
http://www.flashrom.org/pipermail/flashrom/2012-June/009436.html
- MSI MS-7676 (Z68MA-G45 (B3))
http://www.flashrom.org/pipermail/flashrom/2012-June/009424.html
- Palit N61S
http://www.flashrom.org/pipermail/flashrom/2012-May/009212.html
NOT OK:
- ASRock H61M-ITX
http://www.flashrom.org/pipermail/flashrom/2012-May/009224.html
- Dell Latitude E6520
http://www.flashrom.org/pipermail/flashrom/2012-May/009197.html
- Dell Vostro 3700
http://www.flashrom.org/pipermail/flashrom/2012-May/009197.html
- Intel DH61AG
http://www.flashrom.org/pipermail/flashrom/2012-June/009417.html
- Intel DQ965GF
http://www.flashrom.org/pipermail/flashrom/2012-May/009295.html
- HP/Compaq 8100 Elite CMT PC (304Bh)
http://paste.flashrom.org/view.php?id=1182
- HP Z400 Workstation (0AE4h)
http://www.flashrom.org/pipermail/flashrom/2012-June/009350.html
- Supermicro X9DR3-F
http://www.flashrom.org/pipermail/flashrom/2012-June/009422.html
Tested flash chips:
- mark AMIC A25L032 as TEST_OK_PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-June/009363.html
- mark Atmel AT25DF321A as TEST_OK_PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2012-July/009492.html
- mark Atmel AT26DF161 as TEST_OK_PR (+PR)
http://www.flashrom.org/pipermail/flashrom/2012-June/009350.html
- mark Eon EN25QH16 as TEST_OK_PR (+PR)
http://www.flashrom.org/pipermail/flashrom/2012-July/009566.html
- mark SST SST39VF010 as TEST_OK_PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-June/009425.html
- mark ST M25P64 as TEST_OK_PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-May/009332.html
Tested chipset enables:
- Intel 3420
http://www.flashrom.org/pipermail/flashrom/2012-May/009332.html
- Add board enable for ASUS P5GD2-X
lspci: http://paste.flashrom.org/view.php?id=1234
write: http://paste.flashrom.org/view.php?id=1240
Miscellaneous
- Reorder some boards in print.c.
- Remove broken abit URLs.
- Whitespace changes.
- Fix the maximum number of southbridge straps in the ICH descriptor structs.
- Refine documentation regarding ICH region lock bits.
- Demote verbosity of ICH Opcode reprogramming to -VV.
- Exclude Pony-SPI for DOS targets (missing serial support).
Corresponding to flashrom svn r1554.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
The currently unreferenced function in sharplhf00l04.c does a standard
FWH block protection reset (writes 0 to the protection register) and a
standard FWH block erase.
Corresponding to flashrom svn r1538.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This chip needs special command sequences in 8 bit mode. Also, 8 bit
programming needs actually 16bit double byte program.
The chip is found on the Bifferos Bifferboard, for example.
Corresponding to flashrom svn r1521.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
This solution is copied from ft2232_spi and is equally hacky.
Thanks to M.K. for investigating the history of <linux/spi/spidev.h>, which
led to a hopefully more robust check.
Corresponding to flashrom svn r1517.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1514.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1508.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1503.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to modules using the opaque programmer framework (e.g. ICH Hardware
Sequencing) this uses a template struct flashchip element in flashchips.c with
a special probe function that fills the obtained values into that struct.
This allows yet unknown SPI chips to be supported (read, erase, write) almost
as if it was already added to flashchips.c.
Documentation used:
http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
W25Q32BV data sheet Revision F (2011-04-01)
EN25QH16 data sheet Revision F (2011-06-01)
MX25L6436E data sheet Revision 1.8 (2011-12-26)
Tested-by: David Hendricks <dhendrix@google.com>
on W25Q64CV + dediprog
Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog
Thanks also to Michael Karcher for his comments and preliminary review!
Corresponding to flashrom svn r1500.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Corresponding to flashrom svn r1498.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Note: The internal programmer will abort during processor check. This is
intentional.
The other hardware drivers (except those using port I/O) should work.
Corresponding to flashrom svn r1492.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: David Hendricks <dhendrix@google.com>
Tested-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Switch from host OS detection to target OS detection.
Complain about unknown target OS/architecture.
Disable annoying format string warnings on DJGPP.
Native and cross-compilation now usually just require setting CC.
Examples:
make CC=i586-pc-msdosdjgpp-gcc
make CC="clang -m64"
make CC=i686-w64-mingw32-gcc
Tested for a boatload of native and cross compilation configurations.
There is a new target "make libpayload" in case you don't want to
specify all tools by hand.
Corresponding to flashrom svn r1476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.
Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Based on the work of Matthias 'mazzoo' Wenzel this patch adds pretty
printing of those ICH/PCH flash descriptor sections that are
cached/mapped by the chipset (and which are therefore reachable via
FDOC/FDOD registers).
this includes the following:
- content section:
describes the image and some generic properties (number of
sections, offset of sections, PCH/ICH and MCH/PROC strap
offsets and lengths)
- component section:
identify the different SPI flash chips and their capabilities.
- region section
similarly to a partition table this describes the different regions.
the content of FLREG* is derived from this section.
- master section
defines SPI master (host, ME, GbE) access rights of the
individual regions. the content of PR* is derived from this section.
this is only a part of the data included in the descriptor. other
information can be retrieved from a complete binary dump of the
descriptor region only.
this patch also adds macros and pretty printing for "Vendor Specific
Component Capabilities" registers: there are two of them: lower and
upper. they describe the properties of the address space divided by
FPBA (which allows to use multiple flash chips or partitions with
different properties). the properties of all supported flash chips
(together with their RDIDs) are stored in the same format in table
in a descriptor section (which is used by the ME apparently). a
later patch will use the macros outside of ichspi.c which is the
reason why the prettyprinting function and the register bit macros
are not defined in ichspi.c but ich_descriptors.h (else they would
be moved in the follow-up patch).
because this patch relies on (compiler) implementation-specific
layouting of bit-fields, it checks for correct layout before taking
any action on runtime.
Corresponding to flashrom svn r1443.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
See http://www.kernel.org/doc/Documentation/spi/spidev for an introduction.
Usage is as follows:
flashrom -p linux_spi:dev=/dev/spidevX.Y
where X is the bus number, and Y device. It accepts an optional parameter
'speed' which allows to set the SPI clock speed in kHz.
Tested on an Atmel AVR32AP7000 board (NGW100 Network Gateway Kit), see
below, which was used to program a ThinkPad X60, but it should work on every
other Linux system, too.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102)
Corresponding to flashrom svn r1427.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As per IRC discussion, the "ARCH :=" line should be moved after any
lines which set CC, as it uses CC itself. This fixes the MinGW build.
Also, add a "2>/dev/null" in the "ARCH :=" as per suggestion from
Stefan Tauner to improve the output in the case CC is bogus:
Before:
$ make CC=foo
/bin/sh: foo: not found
Checking for a C compiler... not found.
make: *** [compiler] Error 1
After:
$ make CC=foo
Checking for a C compiler... not found.
make: *** [compiler] Error 1
Corresponding to flashrom svn r1418.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was totally broken due to the make's shell function's temporal
behavior.
quote from the gnu make documentation
(http://www.gnu.org/s/hello/manual/make/Shell-Function.html):
"The commands run by calls to the shell function are run when the
function calls are expanded"
we have used the shell function to echo the test programs to a file.
the file name used was equal for all tests and was overwritten for
each test. the result was that all tests (in a single target?) used
the last test program because the echoing of the test programs was
done before all test compilations(!)
see my mail for details:
http://lists.gnu.org/archive/html/bug-make/2011-08/msg00010.html
also the branching for testing ifeq ($(CONFIG_FT2232_SPI), yes) was
unnecessarily complicated.
in my approach here i am using verbatim variables (allows to define
even complex test programs in the makefile without jumping through
hoops) that get exported to environment variables (via "export",
reference afterwards with "$$<varname>").
i have also added the missing redirection of stderr to the compiler
test and changed the definition of ARCH to use simple expansion (:=).
the latter is still wrong, because it uses $(CC) before we check if
a compiler is installed... makes the compiler check pretty much
useless. The simple expansion just reduces the number of errors
printed to 1.
Corresponding to flashrom svn r1416.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Build-tested in a QEMU ppc (Debian) image, and by Andrew Morgan
<ziltro@ziltro.com> on real hardware.
Corresponding to flashrom svn r1400.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
|
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1394.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
| |
Enable architecture dependent compilation of individual sub-drivers for
the internal programmer.
Corresponding to flashrom svn r1366.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Makefile: Use $(OS_ARCH) to add some MinGW-specific workarounds and
settings, so that a simple "make" is sufficient on MinGW (instead of
manual Makefile hacking).
- Explicitly set CC=gcc in the Makefile, otherwise you get an error like
"cc: command not found" on MinGW.
- MinGW doesn't have ffs(), use gcc's __builtin_ffs() instead.
- Add /usr/local/include and /usr/local/lib to CPPFLAGS/LDFLAGS, that's
where libusb-win32 and libftdi stuff is usually placed on MinGW/MSYS.
- Disable serprog (no sockets) and all PCI-based programmers (no libpci)
for now. That leaves dummy, ft2232_spi, and buspirate_spi enabled on
MinGW per default.
- serial.c: Use correct type for 'tmp', both on Windows/MinGW (DWORD)
and POSIX (ssize_t).
Corresponding to flashrom svn r1363.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't use -W or similarly strict compiler checks (yet), but
enabling its use is a good thing. if you add -W to the cflags
without this patch, detection of the compiler will fail with gcc 4.4
for example, because compiling of the test program will fail due to
a warning of unused arguments and -Werror. similarly the other
checks involving compiling test programs would fail.
Corresponding to flashrom svn r1356.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add lock printing for AMIC A25L05PT, A25L05PU, A25L10PT, A25L10PU,
A25L20PT, A25L20PU, A25L40PT, A25L40PU, A25L80P, A25L16PT, A25L16PU,
A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, A25LQ032
to a25.c.
Add lock printing for Atmel AT26DF081A, AT26DF161, AT26DF161A,
AT26DF321.
Move Atmel AT25*/AT26* lock related functions originally added in r1115
from spi25.c to at25.c.
For SPI chips the lock printing was handled by one common function, but
sharing a common function which only is a big switch() statement doesn't
make sense, especially if we can define lock printing functions per
flash chip anyway.
The printlock function pointer in struct flashchip is used to print
status register and locking information, and serves as replacement for
implicit status register and lock printing during probe. That code will
later be changed to store locking info in a machine- accessible data
structure so flashrom can handle locked regions correctly.
Corresponding to flashrom svn r1316.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
| |
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Corresponding to flashrom svn r1297.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
http://www.coreboot.org/DirectHW
Corresponding to flashrom svn r1282.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix various minor compile issues (eg. include necessary standard headers)
- Fix compilation of libpayload code paths
- Provide libpayload support in Makefile
- Add make target "libflashrom.a" which links non-CLI code to static
library
Corresponding to flashrom svn r1280.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Tested-with-DOS-crosscompiler-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
flashrom-chromium tree
This code has been deployed and tested to work on the Cr-48.
There are a few caveats, though:
- The boot BIOS straps register must be modified to select LPC. This
can be done with the "select_bbs.sh" script (Install iotools at
http://code.google.com/p/iotools/ before using select_bbs).
- It is very important to disable power management daemons before
running flashrom on this EC. I commented out the brute force method
we use in the Chromium OS branch that disables powerd, since IIRC
Carl-Daniel has a better approach in the works.
- Due to dependencies which may be introduced by the OEM/ODM EC
firmware, the code is not guaranteed to work for anything other than
the Cr-48.
Corresponding to flashrom svn r1263.
Signed-off-by: David Hendricks <dhendrix@google.com>
Carl-Daniel comments:
Code is not hooked up yet because probing needs to be sorted out.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It uses a Marvell 88SX7042 SATA controller internally which has access
to a separate flash chip hosting the option ROM.
Thanks to Angelbird Ltd for sponsoring development of this driver!
I expect the code to work for that SATA controller even if it is not
part of the Angelbird SSD.
Corresponding to flashrom svn r1258.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Print lock status for all supported Winbond W39* chips:
W39V040A, W39V040B, W39V040C, W39V040FA, W39V040FB, W39V040FC,
W39V080A, W39V080FA, W39V080FA (dual mode).
Fill in correct probe timing for Winbond W39V040C and W39V080FA.
Please note that the W39V040B/W39V040FB pair has identical IDs,
identical read/write/erase, but locking differs. Same applies to
W39V040C/W39V040FC. This causes double detection on chipsets which
support LPC and FWH, making flashing more difficult because the user
has to select the correct chip. This is called the evil twin problem.
A better evil twin handling (patch available) will resolve that problem.
Corresponding to flashrom svn r1245.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
flash programmer
The project is in the the process of designing and making a complete,
open source, graphics card. More info at http://wiki.opengraphics.org.
The first development card is a PCI add in card containing a couple of
FPGAs and a couple of serial flash chips (amongst other things). The
FPGAs are called XP10 and S3 (their part numbers). The XP10 contains its
own flash and does not need to be programmed by flashrom - it ensures
that the device can enumerate on the PCI bus without needing further
configuration.
The larger FPGA is the S3. This is configured from a large SPI flash
(2 MBytes). The second SPI flash is used to store the VGA BIOS. It is
smaller (128 KBytes). This patch adds support for programming either of
the two SPI flash chips.
The programmer device takes one configuration option which selects which
of the two flash chips is accessed. This must be set to either "cprom"
or "bprom". (The project refers to the two chips as "cprom" / "bprom",
"s3" and "bios" are more readable alternatives).
Add support for SST SST25VF010 (REMS). Mark SST SST25VF016B as tested
for write.
Corresponding to flashrom svn r1241.
Signed-off-by: Mark Marshall <mark.marshall@csr.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The currently used write functions (wrappers) all use helpers which
perform the actual write (inner functions).
The signature of the write wrappers is: int write_chip(struct flashchip
*flash, uint8_t * buf);
The signature of the inner write functions varied a lot. This patch
changes them to: int write_part(struct flashchip *flash, uint8_t *src,
int start, int len);
Did you know that flashrom has only 8 inner write functions for all
flash chips? write_page_write_jedec_common write_sector_jedec_common
write_sector_28sf040 spi_chip_write_256_new spi_chip_write_1_new
spi_aai_write_new write_page_82802ab write_page_m29f400bt
Export all inner write functions.
Change the function signature of wait_82802ab to eliminate single-use
variables.
Remove an error message in write_page_m29f400bt which was printed for
every byte written regardless of success.
Add sharplhf00l04.c to the list of flash chip drivers in the Makefile.
While the functions in there are unused, I suspect we will need them
later, and by hooking the file up we ensure that compilation won't
break.
Corresponding to flashrom svn r1208.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1204.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default.
Wiki output was missing all flash chips if CONFIG_INTERNAL was not
selected.
Use correct type for toupper()/tolower()/isspace() functions.
Specify software requirements in a generic way.
Non-x86 compilation does not work with the default programmer set, so
list the make parameters which result in a working build.
Corresponding to flashrom svn r1203.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Direct I/O library for Mac OS X is now called DirectHW to make sure
people can find it via an internet search.
DirectIO was a generic name for a concept and thus not a good
distinguisher for a library.
Corresponding to flashrom svn r1198.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested on a 82541PI (0x8086, 0x107c) using 32-bit hardware.
The last line in nicintel_request_spibus() could be changed so that FL_BUSY
is used instead.
Shortened sample log:
[...]
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:03.0).
Found chip "ST M25P10.RES" (128 KB, SPI) at physical address 0xfffe0000.
Multiple flash chips were detected: M25P05.RES M25P10.RES
Please specify which chip to use with the -c <chipname> option.
[...]
Corresponding to flashrom svn r1151.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1117.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Huge thanks go to Michael Karcher for reverse engineering the interface
and to Johannes Sjölund for testing the first iterations of my patch on
his hardware until it worked.
Thanks to the following testers of the patch:
* MCP61, 10de:03e0, LPC OK, ECS Geforce6100SM-M, Andrew Cleveland
* MCP61, 10de:03e0, LPC OK, Biostar NF520-A2 NF61D-A2, Vitaliy Buchynskyy
* MCP65, 10de:0441, SPI OK, MSI MS-7369 K9N Neo-F v2, Kjell Braden
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Wolfgang Schnitker
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Johannes Sjölund
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Melchior Franz
* MCP78S, 10de:075c, SPI OK, Asus M3N78 PRO, Brad Rogers
* MCP78S, 10de:075c, SPI OK, Asus M3N78-VM, Marcel Partap
* MCP78S, 10de:075c, SPI OK, Asus M4N78 PRO, Kimmo Vuorinen
* MCP78S, 10de:075c, SPI OK, Asus M4N78 PRO, Vikram Ambrose
* MCP79, 10de:0aad, SPI OK, Acer Aspire R3600, Andrew Morgan
* MCP79, 10de:0aae, LPC ??, Lenovo Ideapad S12 laptop, Christian Schmitt
* MCP79, 10de:0aae, SPI OK, Apple iMac9,1 Mac-F2218EA9, David "dledson"
flashrom will refuse to write/erase for safety reasons if MCP6x/MCP7x
SPI is detected.
Corresponding to flashrom svn r1113.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
http://rayer.ic.cz/elektro/spipgm.htm
To use the RayeR driver, run
flashrom -p rayer_spi -V
Known bugs/limitations:
- Won't compile/work on non-x86 architectures.
- Will always use direct port I/O access.
Log follows:
flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC
4.3.2, little endian
Calibrating delay loop... OK.
Initializing rayer_bitbang_spi programmer
Using port 0x378 as I/O base for parallel port access.
...
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2015
...
Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address
0xffe00000.
...
No operations were specified.
Corresponding to flashrom svn r1093.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|