| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- mark chipset enable for QS57 as OK
(my thinkpad)
- mark MSI G31M3-L(S) V2 (MS-7529) as OK
http://www.flashrom.org/pipermail/flashrom/2011-June/006634.html
- mark AT49BV512 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-June/006609.html
- mark MX25L4005 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-June/006634.html
- mark SST49LF020 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-May/006570.html
- mark SST25VF064C as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-May/006586.html
- mark W25x16 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-June/006605.html
Corresponding to flashrom svn r1324.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1323.
Signed-off-by: Steven Zakulec <spzakulec@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There was one line break added too much in the previous commit, sorry.
the probing functions need to output at least one '\n' for satisfactory output.
that means even in error cases they have to do that.
OTOH they should not output a sequence of "\n\n" because
it would distort the verbose probing output with empty lines.
Corresponding to flashrom svn r1322.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
- missing spaces in code and output
- improved documentation/naming/output
- missing line breaks in spi probing functions
Corresponding to flashrom svn r1321.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested motherboards:
- MSI MS-7599 (870-C45)
http://www.flashrom.org/pipermail/flashrom/2011-May/006420.html
- Gigabyte GA-P55A-UD4 (rev 1.0)
http://www.flashrom.org/pipermail/flashrom/2011-May/006415.html
- Supermicro X8DTU-F
http://www.flashrom.org/pipermail/flashrom/2011-May/006329.html
- Supermicro X8STi
http://www.flashrom.org/pipermail/flashrom/2011-May/006436.html
tested board enable:
- abit NF-M2 nView
success report (without a log though): http://www.flashrom.org/pipermail/flashrom/2011-April/006167.html
tested flash chips:
- ST M50FW080 (+EW)
http://www.flashrom.org/pipermail/flashrom/2011-May/006409.html
- ST M25P32 (+EW)
http://www.flashrom.org/pipermail/flashrom/2011-May/006398.html
- Winbond W25x64 (+P)
http://www.flashrom.org/pipermail/flashrom/2011-March/006012.html
- Winbond W39V040FA (+W)
http://www.flashrom.org/pipermail/flashrom/2010-December/005642.html
new flash chip
- Winbond W25Q128
http://www.flashrom.org/pipermail/flashrom/2011-April/006309.html
Corresponding to flashrom svn r1320.
W25Q128 is:
Signed-off-by: Antony Rheneus <rheneus.paul@gmail.com>
everything else is:
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1319.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
| |
Without this the magic numbers need to be kept in sync with the maximum
length of the strings printed in the corresponding column. if not, an
overflow and a nasty ' '-storm occur on executing flashrom -L.
Corresponding to flashrom svn r1318.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch combines three previously posted patches in a revised form.
one is even stolen from Stefan Reinauer (remove umlauts from man page).
Corresponding to flashrom svn r1317.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add lock printing for AMIC A25L05PT, A25L05PU, A25L10PT, A25L10PU,
A25L20PT, A25L20PU, A25L40PT, A25L40PU, A25L80P, A25L16PT, A25L16PU,
A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, A25LQ032
to a25.c.
Add lock printing for Atmel AT26DF081A, AT26DF161, AT26DF161A,
AT26DF321.
Move Atmel AT25*/AT26* lock related functions originally added in r1115
from spi25.c to at25.c.
For SPI chips the lock printing was handled by one common function, but
sharing a common function which only is a big switch() statement doesn't
make sense, especially if we can define lock printing functions per
flash chip anyway.
The printlock function pointer in struct flashchip is used to print
status register and locking information, and serves as replacement for
implicit status register and lock printing during probe. That code will
later be changed to store locking info in a machine- accessible data
structure so flashrom can handle locked regions correctly.
Corresponding to flashrom svn r1316.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
| |
Success report: http://www.flashrom.org/pipermail/flashrom/2011-May/006473.html
Corresponding to flashrom svn r1315.
Signed-off-by: John Schmerge <jschmerge@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1314.
Signed-off-by: Shailendra Sodhi <shailendra.sodhi@endace.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Success report:
http://www.flashrom.org/pipermail/flashrom/2010-October/005046.html
Corresponding to flashrom svn r1313.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Success report: http://flashrom.org/pipermail/flashrom/2011-April/006179.html
Corresponding to flashrom svn r1312.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Success report: http://flashrom.org/pipermail/flashrom/2011-April/006179.html
Corresponding to flashrom svn r1311.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1310.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>
|
|
|
|
|
|
|
|
|
|
| |
Success report with MX29F001TPC-12 at:
http://flashrom.org/pipermail/flashrom/2011-April/006132.html
Corresponding to flashrom svn r1309.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
| |
http://www.flashrom.org/pipermail/flashrom/2011-April/006099.html
Corresponding to flashrom svn r1308.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1307.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1306.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1305.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1304.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1303.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1302.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1301.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1300.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1298.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Corresponding to flashrom svn r1297.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Anton Kochkov <anton.kochkov@gmail.com>
Acked-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
r1293 introduced a bug which caused probing to loop at the first found
chip.
Corresponding to flashrom svn r1296.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1295.
Signed-off-by: John Schmerge <jbschmerge@gmail.com> for Devon IT
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Handle board-specific quirks in three phases:
1. Before Super I/O probing (e.g. blacklisting of some Super I/O probes,
or unhiding the Super I/O)
2. Before the laptop enforcement decision (e.g. whitelisting a laptop
for flashing)
3. After chipset enabling (all current board enables)
Implementation note: All entries in board_pciid_enables get an
additional phase parameter. Alternative variants (3 tables instead of 1)
also have their downsides, and I chose table bloat over table
multiplication).
With this patch, it should be possible to whitelist supported laptops
with a matching entry (phase P2) in board_pciid_enables which points to
a function setting laptop_ok=1. (In case DMI is broken, matching might
be a little bit more difficult, but it is still doable.)
Corresponding to flashrom svn r1294.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
| |
This moves 99.5% of the .data section to .rodata (which ends up in .text).
Corresponding to flashrom svn r1293.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reversible MMIO space writes now use rmmio_write*().
Reversible PCI MMIO space writes now use pci_rmmio_write*().
If a MMIO value needs to be queued for restore without writing it,
use rmmio_val*().
MMIO space writes which are one-shot (e.g. communication with some chip)
should continue to use the permanent mmio_write* variants.
Corresponding to flashrom svn r1292.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David tested it successfully on some NM10/ICH7 platforms which switch
between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM).
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1291.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1290.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.
WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).
Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379
Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It is extremely unlikely that a chip not requiring delays in probe does
require them in erase. We observed unreliable erasing with a SST49LF004A
with these delays, so remove them if the are not required.
In review, I got the hint that "probe_jedec goes further by making that
call conditional on nonzero delay". I decided to ignore that. For
internal_delay, the small amount of clock cycles wasted for calling
programmer_delay(0) is negligible compared to LPC cycle times. It might
be an issue for 5 wasted bytes on the serial line in serprog. OTOH,
flash erase is still slow compared to 6*5 bytes on a serial port at
reasonable speed.
Corresponding to flashrom svn r1288.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As the comment indicates, that function is not a chip erase function
at all, but a function calling a block eraser in a loop. So it adds
no extra value to what we already have in the block_eraser
infrastructure.
Furthermore, that function assumes a uniform sector size layout, but
is referenced from flash chip with non-uniform sector size layout, which
is just wrong.
Corresponding to flashrom svn r1287.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported by: wickberg@student.chalmers.se
flashrom -V: http://paste.flashrom.org/view.php?id=452
lspci: http://paste.flashrom.org/view.php?id=453
(note that the flashrom dump is with a foreign chip. That
board is originally equipped with an PMC Pm49FL004.
Corresponding to flashrom svn r1286.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
| |
Success report at
http://flashrom.org/pipermail/flashrom/2011-March/006072.html
Corresponding to flashrom svn r1285.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1284.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1283.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
http://www.coreboot.org/DirectHW
Corresponding to flashrom svn r1282.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use 16-bit values for bit masks in 16-bit registers.
Check for SPI Cycle In Progress and wait up to 60 ms.
Do not touch reserved bits.
Reduce SPI cycle timeout from 60 s to 60 ms.
Clear transaction errors caused by our own SPI accesses.
Add better debugging in case the hardware misbehaves.
Corresponding to flashrom svn r1281.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix various minor compile issues (eg. include necessary standard headers)
- Fix compilation of libpayload code paths
- Provide libpayload support in Makefile
- Add make target "libflashrom.a" which links non-CLI code to static
library
Corresponding to flashrom svn r1280.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Tested-with-DOS-crosscompiler-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix a few typos.
Change the EC memory region mapping name.
Drop unused function parameter.
Use mmio_writeb()/mmio_readb() to get reliable access to volatile memory
locations instead of plain pointer access which is optimized away by gcc.
Use own it85_* SPI high-level chip read/write functions instead of
relying on unrelated ICH functions.
Corresponding to flashrom svn r1279.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David writes:
I applied the patch against the Chromium OS branch and
successfully tested read and write operations on a Cr48.
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Fix compilation if everything except CONFIG_SATAMV is no.
Do not compile in PCI support for wiki printing if no PCI devices are
supported.
Corresponding to flashrom svn r1278.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1277.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1276.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
| |
Flashrom -V -w: http://paste.flashrom.org/view.php?id=395
Corresponding to flashrom svn r1275.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|