diff options
-rw-r--r-- | Makefile | 71 | ||||
-rw-r--r-- | README | 33 | ||||
-rw-r--r-- | cbtable.c | 2 | ||||
-rw-r--r-- | flashrom.c | 33 | ||||
-rw-r--r-- | hwaccess.h | 8 | ||||
-rw-r--r-- | physmap.c | 4 | ||||
-rw-r--r-- | programmer.h | 3 | ||||
-rw-r--r-- | util/ich_descriptors_tool/Makefile | 13 | ||||
-rw-r--r-- | util/ich_descriptors_tool/ich_descriptors_tool.c | 17 |
9 files changed, 130 insertions, 54 deletions
@@ -2,7 +2,7 @@ # This file is part of the flashrom project. # # Copyright (C) 2005 coresystems GmbH <stepan@coresystems.de> -# Copyright (C) 2009,2010 Carl-Daniel Hailfinger +# Copyright (C) 2009,2010,2012 Carl-Daniel Hailfinger # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -20,6 +20,12 @@ PROGRAM = flashrom +############################################################################### +# Defaults for the toolchain. + +# If you want to cross-compile, just run e.g. +# make CC=i586-pc-msdosdjgpp-gcc +# You may have to specify STRIP/AR/RANLIB as well. CC ?= gcc STRIP ?= strip INSTALL = install @@ -31,12 +37,17 @@ EXPORTDIR ?= . AR ?= ar RANLIB ?= ranlib +# If your compiler spits out excessive warnings, run make WARNERROR=no +# You shouldn't have to change this flag. WARNERROR ?= yes ifeq ($(WARNERROR), yes) CFLAGS += -Werror endif +############################################################################### +# General OS/architecture specific settings. + # HOST_OS is only used to work around local toolchain issues. HOST_OS ?= $(shell uname) ifeq ($(HOST_OS), MINGW32_NT-5.1) @@ -47,7 +58,7 @@ ifneq ($(HOST_OS), SunOS) STRIP_ARGS = -s endif -# Determine the destination processor architecture. +# Determine the destination OS. # IMPORTANT: The following line must be placed before TARGET_OS is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. @@ -55,25 +66,27 @@ override TARGET_OS := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E os.h 2>/dev/ ifeq ($(TARGET_OS), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include -# DirectHW framework can be found in the DirectHW library. -LDFLAGS += -framework IOKit -framework DirectHW -L/opt/local/lib -L/usr/local/lib +LDFLAGS += -L/opt/local/lib -L/usr/local/lib endif + ifeq ($(TARGET_OS), FreeBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif + ifeq ($(TARGET_OS), OpenBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif + ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe -CPPFLAGS += -I../libgetopt -I../libpci/include +CPPFLAGS += -I../libgetopt # DJGPP has odd uint*_t definitions which cause lots of format string warnings. CPPFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt LIBS += ../libgetopt/libgetopt.a -# Bus Pirate, Serprog and Pony-SPI are not supported under DOS (missing serial support). +# Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support). ifeq ($(CONFIG_BUSPIRATE_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes else @@ -263,18 +276,23 @@ override CONFIG_SATAMV = no endif endif +############################################################################### +# Flash chip drivers and bus support infrastructure. + CHIP_OBJS = jedec.o stm50flw0x0x.o w39.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o \ a25.o at25.o opaque.o sfdp.o en29lv640b.o -LIB_OBJS = layout.o +############################################################################### +# Library code. -CLI_OBJS = flashrom.o cli_classic.o cli_output.o print.o +LIB_OBJS = layout.o flashrom.o udelay.o programmer.o -PROGRAMMER_OBJS = udelay.o programmer.o +############################################################################### +# Frontend related stuff. -all: pciutils features $(PROGRAM)$(EXEC_SUFFIX) +CLI_OBJS = cli_classic.o cli_output.o print.o # Set the flashrom version string from the highest revision number # of the checked out flashrom files. @@ -375,6 +393,9 @@ endif endif endif +############################################################################### +# Programmer drivers and programmer support infrastructure. + ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o @@ -530,12 +551,19 @@ LIBS += -l$(shell uname -p) else ifeq ($(TARGET_OS), DOS) # FIXME There needs to be a better way to do this +CPPFLAGS += -I../libpci/include LIBS += ../libpci/lib/libpci.a else LIBS += -lpci ifeq ($(TARGET_OS), OpenBSD) # For (i386|amd64)_iopl(2). LIBS += -l$(shell uname -m) +else +ifeq ($(TARGET_OS), Darwin) +# DirectHW framework can be found in the DirectHW library. +LIBS += -framework IOKit -framework DirectHW +else +endif endif endif endif @@ -554,6 +582,11 @@ FEATURE_LIBS += $(shell LC_ALL=C grep -q "NEEDLIBZ := yes" .libdeps && printf "% LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS) OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS) +all: pciutils features $(PROGRAM)$(EXEC_SUFFIX) +ifeq ($(ARCH), x86) + @+$(MAKE) -C util/ich_descriptors_tool/ TARGET_OS=$(TARGET_OS) EXEC_SUFFIX=$(EXEC_SUFFIX) +endif + $(PROGRAM)$(EXEC_SUFFIX): $(OBJS) $(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(FEATURE_LIBS) $(LIBS) @@ -574,6 +607,7 @@ TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root -- # We don't use EXEC_SUFFIX here because we want to clean everything. clean: rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d + @+$(MAKE) -C util/ich_descriptors_tool/ clean distclean: clean rm -f .features .libdeps @@ -597,7 +631,7 @@ export COMPILER_TEST compiler: featuresavailable @printf "Checking for a C compiler... " @echo "$$COMPILER_TEST" > .test.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >/dev/null 2>&1 && \ + @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >/dev/null && \ echo "found." || ( echo "not found."; \ rm -f .test.c .test$(EXEC_SUFFIX); exit 1) @rm -f .test.c .test$(EXEC_SUFFIX) @@ -631,17 +665,17 @@ ifeq ($(CHECK_LIBPCI), yes) pciutils: compiler @printf "Checking for libpci headers... " @echo "$$LIBPCI_TEST" > .test.c - @$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >/dev/null 2>&1 && \ + @$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >/dev/null && \ echo "found." || ( echo "not found."; echo; \ echo "Please install libpci headers (package pciutils-devel)."; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1) @printf "Checking if libpci is present and sufficient... " @printf "" > .libdeps - @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) >/dev/null 2>&1 && \ + @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) >/dev/null && \ echo "yes." || ( echo "no."; \ printf "Checking if libz+libpci are present and sufficient..."; \ - $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) -lz >/dev/null 2>&1 && \ + $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) -lz >/dev/null && \ ( echo "yes."; echo "NEEDLIBZ := yes" > .libdeps ) || ( echo "no."; echo; \ echo "Please install libpci (package pciutils) and/or libz."; \ echo "See README for more information."; echo; \ @@ -657,10 +691,13 @@ endif # If a user does not explicitly request a non-working feature, we should # silently disable it. However, if a non-working (does not compile) feature # is explicitly requested, we should bail out with a descriptive error message. -ifeq ($(UNSUPPORTED_FEATURES), ) -featuresavailable: -else +# We also have to check that at least one programmer driver is enabled. featuresavailable: +ifeq ($(PROGRAMMER_OBJS),) + @echo "You have to enable at least one programmer driver!" + @false +endif +ifneq ($(UNSUPPORTED_FEATURES), ) @echo "The following features are unavailable on your machine: $(UNSUPPORTED_FEATURES)" @false endif @@ -93,14 +93,18 @@ To compile on OpenBSD, use: To compile and run on Darwin/Mac OS X: Install DirectHW from coresystems GmbH. - DirectHW is available at http://www.coresystems.de/en/directhw . + DirectHW is available at http://www.coreboot.org/DirectHW . To cross-compile on Linux for DOS: - Get RPMs of the cross compiler from the DJGPP site and install them: + Get packages of the DJGPP cross compiler and install them: + djgpp-filesystem djgpp-gcc djgpp-cpp djgpp-runtime djgpp-binutils + As an alternative, the DJGPP web site offers packages for download as well: djcross-binutils-2.19.1-10ap.i386.rpm djcross-gcc-4.3.2-8ap.i686.rpm djcrx-2.04pre_20090725-13ap.i386.rpm + The cross toolchain packages for your distribution may have slightly different + names (look for packages named *djgpp*). Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch Download and compile http://assembler.cz/flashrom/libgetopt/ Compile pciutils, see README.DJGPP for instructions. @@ -108,7 +112,7 @@ To cross-compile on Linux for DOS: ../libpci should contain pciutils source and binaries. ../libgetopt should contain getopt.a from libgetopt. Run either (change settings where appropriate) - make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip OS_ARCH=DOS + make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip or (above settings hardcoded) make djgpp-dos You might have to add WARNERROR=no to the make command line. @@ -116,17 +120,22 @@ To cross-compile on Linux for DOS: http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure CWSDPMI.EXE is in the current directory. +To cross-compile on Linux for Windows: + + Get packages of the MinGW cross compiler and install them: + mingw32-filesystem mingw32-cross-cpp mingw32-cross-binutils mingw32-cross-gcc + mingw32-runtime mingw32-headers + The cross toolchain packages for your distribution may have slightly different + names (look for packages named *mingw*). + PCI-based programmers (internal etc.) are not supported on Windows. + Run (change CC= and STRIP= settings where appropriate) + make CC=i686-w64-mingw32-gcc STRIP=i686-w64-mingw32-strip + Processor architecture dependent features: - On non-x86 architectures you have to disable a few programmers because they - use port-based I/O which is not directly available on non-x86. Please add - CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_ATAHPT=no CONFIG_NICREALTEK=no \ - CONFIG_NICNATSEMI=no - as parameters to the "make" invocation. - Besides that, the internal programmer is only supported on x86 and MIPS. On - other architectures, please add - CONFIG_INTERNAL=no - as parameter to the "make" invocation. + On non-x86 architectures a few programmers don't work (yet) because they + use port-based I/O which is not directly available on non-x86. Those + programmers will be disabled automatically if you run "make". Installation ------------ @@ -211,7 +211,7 @@ int coreboot_init(void) struct lb_header *lb_table; struct lb_record *rec, *last; -#ifdef __DARWIN__ +#if defined(__MACH__) && defined(__APPLE__) /* This is a hack. DirectHW fails to map physical address 0x00000000. * Why? */ @@ -60,10 +60,6 @@ unsigned long flashbase; /* Is writing allowed with this programmer? */ int programmer_may_write; -#if CONFIG_INTERNAL+CONFIG_DUMMY+CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_PONY_SPI+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV+CONFIG_LINUX_SPI < 1 -#error You have to enable at least one programmer! -#endif - const struct programmer_entry programmer_table[] = { #if CONFIG_INTERNAL == 1 { @@ -1490,10 +1486,35 @@ void list_programmers_linebreak(int startcol, int cols, int paren) void print_sysinfo(void) { -#if HAVE_UTSNAME == 1 +#ifdef _WIN32 + SYSTEM_INFO si; + OSVERSIONINFOEX osvi; + + memset(&si, 0, sizeof(SYSTEM_INFO)); + memset(&osvi, 0, sizeof(OSVERSIONINFOEX)); + msg_ginfo(" on Windows"); + /* Tell Windows which version of the structure we want. */ + osvi.dwOSVersionInfoSize = sizeof(OSVERSIONINFOEX); + if (GetVersionEx((OSVERSIONINFO*) &osvi)) + msg_ginfo(" %lu.%lu", osvi.dwMajorVersion, osvi.dwMinorVersion); + else + msg_ginfo(" unknown version"); + GetSystemInfo(&si); + switch (si.wProcessorArchitecture) { + case PROCESSOR_ARCHITECTURE_AMD64: + msg_ginfo(" (x86_64)"); + break; + case PROCESSOR_ARCHITECTURE_INTEL: + msg_ginfo(" (x86)"); + break; + default: + msg_ginfo(" (unknown arch)"); + break; + } +#elif HAVE_UTSNAME == 1 struct utsname osinfo; - uname(&osinfo); + uname(&osinfo); msg_ginfo(" on %s %s (%s)", osinfo.sysname, osinfo.release, osinfo.machine); #else @@ -180,10 +180,6 @@ cpu_to_be(64) #include <asm/sunddi.h> #endif -#if (defined(__MACH__) && defined(__APPLE__)) -#define __DARWIN__ -#endif - /* Clarification about OUTB/OUTW/OUTL argument order: * OUT[BWL](val, port) */ @@ -203,7 +199,7 @@ cpu_to_be(64) #define INW(x) __extension__ ({ u_int inw_tmp = (x); inw(inw_tmp); }) #define INL(x) __extension__ ({ u_int inl_tmp = (x); inl(inl_tmp); }) #else -#if defined(__DARWIN__) +#if defined(__MACH__) && defined(__APPLE__) /* Header is part of the DirectHW library. */ #include <DirectHW/DirectHW.h> #define off64_t off_t @@ -303,7 +299,7 @@ static inline uint32_t inl(uint16_t port) #endif #endif -#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) +#if !(defined(__MACH__) && defined(__APPLE__)) && !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); int wrmsr(int addr, msr_t msr); @@ -129,7 +129,7 @@ int setup_cpu_msr(int cpu) void cleanup_cpu_msr(void) { } -#elif defined(__DARWIN__) +#elif defined(__MACH__) && defined(__APPLE__) #define MEM_DEV "DirectHW" @@ -468,7 +468,7 @@ void cleanup_cpu_msr(void) #else -#ifdef __DARWIN__ +#if defined(__MACH__) && defined(__APPLE__) int setup_cpu_msr(int cpu) { // Always succeed for now diff --git a/programmer.h b/programmer.h index 5109ed98..723374d7 100644 --- a/programmer.h +++ b/programmer.h @@ -240,6 +240,7 @@ int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data); /* print.c */ #if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV >= 1 +/* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */ void print_supported_pcidevs(const struct pcidev_status *devs); #endif @@ -637,7 +638,7 @@ void serprog_delay(int usecs); #endif /* serial.c */ -#if _WIN32 +#ifdef _WIN32 typedef HANDLE fdtype; #else typedef int fdtype; diff --git a/util/ich_descriptors_tool/Makefile b/util/ich_descriptors_tool/Makefile index 1af90ced..d8a79f50 100644 --- a/util/ich_descriptors_tool/Makefile +++ b/util/ich_descriptors_tool/Makefile @@ -15,11 +15,16 @@ CFLAGS += -MMD -MP -MF $(DEPPATH)/$(@F).d CFLAGS += -D ICH_DESCRIPTORS_FROM_DUMP CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +ifeq ($(TARGET_OS), DOS) +# DJGPP has odd uint*_t definitions which cause lots of format string warnings. +CFLAGS += -Wno-format +endif + OBJ = $(OBJATH)/$(SRC:%.c=%.o) SHAREDOBJ = $(OBJATH)/$(notdir $(SHAREDSRC:%.c=%.o)) -all:$(PROGRAM) +all:$(PROGRAM)$(EXEC_SUFFIX) $(OBJ): $(OBJATH)/%.o : %.c $(CC) $(CFLAGS) -o $@ -c $< @@ -29,11 +34,11 @@ $(OBJ): $(OBJATH)/%.o : %.c $(SHAREDOBJ): $(OBJATH)/%.o : $(SHAREDSRCDIR)/%.c $(CC) $(CFLAGS) -o $@ -c $< -$(PROGRAM): $(OBJ) $(SHAREDOBJ) - $(CC) -o $(PROGRAM) $(OBJ) $(SHAREDOBJ) +$(PROGRAM)$(EXEC_SUFFIX): $(OBJ) $(SHAREDOBJ) + $(CC) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJ) $(SHAREDOBJ) clean: - rm -f $(PROGRAM) + rm -f $(PROGRAM) $(PROGRAM).exe rm -rf $(DEPPATH) $(OBJATH) # Include the dependency files. diff --git a/util/ich_descriptors_tool/ich_descriptors_tool.c b/util/ich_descriptors_tool/ich_descriptors_tool.c index a1bce1b2..1ca970a9 100644 --- a/util/ich_descriptors_tool/ich_descriptors_tool.c +++ b/util/ich_descriptors_tool/ich_descriptors_tool.c @@ -25,7 +25,6 @@ #include <stdio.h> #include <stdint.h> #include <stdlib.h> -#include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> @@ -33,6 +32,13 @@ #include <string.h> #include <errno.h> #include "ich_descriptors.h" +/* Some DJGPP builds define __unix__ although they don't support mmap(). + * Cygwin defines __unix__ and supports mmap(), but it does not work well. + */ +#if !defined(__MSDOS__) && !defined(_WIN32) && (defined(unix) || defined(__unix__) || defined(__unix)) || (defined(__MACH__) && defined(__APPLE__)) +#define HAVE_MMAP 1 +#include <sys/mman.h> +#endif static void dump_file(const char *basename, const uint32_t *dump, unsigned int len, struct ich_desc_region *reg, unsigned int i) { @@ -161,16 +167,17 @@ int main(int argc, char *argv[]) if (len < 0) usage(argv, "Seeking to the end of the file failed"); +#ifdef HAVE_MMAP buf = mmap(NULL, len, PROT_READ, MAP_PRIVATE, fd, 0); - if (buf == (void *) -1) { + if (buf == (void *) -1) +#endif + { /* fallback for stupid OSes like cygwin */ - int ret; buf = malloc(len); if (!buf) usage(argv, "Could not allocate memory"); lseek(fd, 0, SEEK_SET); - ret = read(fd, buf, len); - if (ret != len) + if (len != read(fd, buf, len)) usage(argv, "Seeking to the end of the file failed"); } printf("The flash image has a size of %d [0x%x] bytes.\n", len, len); |