From 779e303dfea49664c8c5bc0e871c684ab58be9df Mon Sep 17 00:00:00 2001
From: Maximilian Hils <git@maximilianhils.com>
Date: Tue, 14 Jan 2014 17:58:42 +0100
Subject: fix syntax highlighting for countershape urls by using different
 quotes

---
 doc-src/tutorials/transparent-dhcp.html | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'doc-src/tutorials/transparent-dhcp.html')

diff --git a/doc-src/tutorials/transparent-dhcp.html b/doc-src/tutorials/transparent-dhcp.html
index e0148afa..ce8a10fd 100644
--- a/doc-src/tutorials/transparent-dhcp.html
+++ b/doc-src/tutorials/transparent-dhcp.html
@@ -4,10 +4,10 @@ This walkthrough illustrates how to set up transparent proxying with mitmproxy.
     The network setup is simple:  `internet <--> proxy vm <--> (virtual) internal network`.  
     For the proxy machine, *eth0* represents the outgoing network. *eth1* is connected to the internal network that will be proxified, using a static ip (192.168.3.1).  
     <hr>VirtualBox configuration:
-    <img src="@!urlTo("tutorials/transparent-dhcp/step1_vbox_eth0.png")!@"/><br><br>
-    <img src="@!urlTo("tutorials/transparent-dhcp/step1_vbox_eth1.png")!@"/>  
+    <img src="@!urlTo('tutorials/transparent-dhcp/step1_vbox_eth0.png')!@"/><br><br>
+    <img src="@!urlTo('tutorials/transparent-dhcp/step1_vbox_eth1.png')!@"/>  
     <br>Proxy VM:
-    <img src="@!urlTo("tutorials/transparent-dhcp/step1_proxy.png")!@"/>  
+    <img src="@!urlTo('tutorials/transparent-dhcp/step1_proxy.png')!@"/>  
     <hr>
 2.  **Configure DHCP and DNS**  
     We use dnsmasq to provide DHCP and DNS in our internal network. 
@@ -34,7 +34,7 @@ This walkthrough illustrates how to set up transparent proxying with mitmproxy.
         `sudo service dnsmasq restart`
         <hr>
         Your proxied machine's network settings should now look similar to this:
-        <img src="@!urlTo("tutorials/transparent-dhcp/step2_proxied_vm.png")!@"/>
+        <img src="@!urlTo('tutorials/transparent-dhcp/step2_proxied_vm.png')!@"/>
         <hr>
 
 3.  **Set up traffic redirection to mitmproxy**  
@@ -46,7 +46,7 @@ This walkthrough illustrates how to set up transparent proxying with mitmproxy.
         -j REDIRECT --to-port 8080
     </pre>
 
-4.  If required, <a href="@!urlTo("ssl.html")!@">install the mitmproxy
+4.  If required, <a href="@!urlTo('ssl.html')!@">install the mitmproxy
     certificates on the test device</a>.
 
 5.  Finally, we can run <code>mitmproxy -T</code>.  
-- 
cgit v1.2.3