From 31ee4607c892f85c5d139e54acbc3ca4f9fb6bcb Mon Sep 17 00:00:00 2001
From: Maximilian Hils <git@maximilianhils.com>
Date: Mon, 7 Sep 2015 10:30:40 +0200
Subject: remove old docs

---
 doc-src/transparent/linux.html | 53 ------------------------------------------
 1 file changed, 53 deletions(-)
 delete mode 100644 doc-src/transparent/linux.html

(limited to 'doc-src/transparent/linux.html')

diff --git a/doc-src/transparent/linux.html b/doc-src/transparent/linux.html
deleted file mode 100644
index d4b490c7..00000000
--- a/doc-src/transparent/linux.html
+++ /dev/null
@@ -1,53 +0,0 @@
-On Linux, mitmproxy integrates with the iptables redirection mechanism to
-achieve transparent mode.
-
-<ol class="tlist">
-
-    <li> <a href="@!urlTo('certinstall.html')!@">Install the mitmproxy
-    certificates on the test device</a>. </li>
-
-    <li> Enable IP forwarding:
-
-    <pre class="terminal">sysctl -w net.ipv4.ip_forward=1</pre>
-
-    You may also want to consider enabling this permanently in
-    <b>/etc/sysctl.conf</b>.
-
-    </li>
-
-    <li> If your target machine is on the same physical network and you configured it to use a custom gateway,
-    disable ICMP redirects:
-
-    <pre class="terminal">echo 0 | sudo tee /proc/sys/net/ipv4/conf/*/send_redirects</pre>
-
-    You may also want to consider enabling this permanently in
-    <b>/etc/sysctl.conf</b> as demonstrated <a href="http://unix.stackexchange.com/a/58081">here</a>.
-
-    </li>
-
-    <li> Create an iptables ruleset that redirects the desired traffic to the
-    mitmproxy port. Details will differ according to your setup, but the
-    ruleset should look something like this:
-
-<pre class="terminal">iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 8080
-iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -j REDIRECT --to-port 8080</pre>
-
-    </li>
-
-    <li> Fire up mitmproxy. You probably want a command like this:
-
-        <pre class="terminal">mitmproxy -T --host</pre>
-
-        The <b>-T</b> flag turns on transparent mode, and the <b>--host</b>
-        argument tells mitmproxy to use the value of the Host header for URL
-        display.
-
-    </li>
-
-    <li> Finally, configure your test device to use the host on which mitmproxy is
-    running as the default gateway.</li>
-
-</ol>
-
-
-For a detailed walkthrough, have a look at the <a href="@!urlTo('tutorials/transparent-dhcp.html')!@"><i>Transparently proxify virtual machines</i></a> tutorial.
-- 
cgit v1.2.3