From 555257933af6e7e3b106ac3589520b5dad45061b Mon Sep 17 00:00:00 2001 From: inmarket Date: Mon, 28 Oct 2013 20:04:03 +1000 Subject: Clean up the driver directory structure by moving all board specific files into the boards sub-structure. --- .../gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h | 112 --------------------- 1 file changed, 112 deletions(-) delete mode 100644 drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h (limited to 'drivers/gdisp/ILI9325') diff --git a/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h b/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h deleted file mode 100644 index 60508c1a..00000000 --- a/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/* - driver quickly hacked together from a chinese sourcecode that came - with the board and existing ili9320 code by Chris van Dongen (sjaak) - (sjaak2002 at msn.com) - - Also added rotation for 180 and 270 degrees and minor tweaks to - setcursor - - Added code comes without warranty and free bugs. Feel free to use - or misuse the added code :D -*/ - - -/** - * @file drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h - * @brief GDISP Graphic Driver subsystem board interface for the ILI9325 display. - */ - -#ifndef GDISP_LLD_BOARD_H -#define GDISP_LLD_BOARD_H - -// For a multiple display configuration we would put all this in a structure and then -// set g->board to that structure. -#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */ -#define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */ - -static inline void init_board(GDisplay *g) { - - // As we are not using multiple displays we set g->board to NULL as we don't use it. - g->board = 0; - - switch(g->controllerdisplay) { - case 0: // Set up for Display 0 - /* FSMC setup for F1 */ - rccEnableAHB(RCC_AHBENR_FSMCEN, 0); - - /* set pin modes */ - /* IOBus busD = {GPIOD, PAL_WHOLE_PORT, 0}; - IOBus busE = {GPIOE, PAL_WHOLE_PORT, 0}; - palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetPadMode(GPIOE, GPIOE_TFT_RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, GPIOD_TFT_LIGHT, PAL_MODE_OUTPUT_PUSHPULL); */ - - const unsigned char FSMC_Bank = 0; - - /* FSMC timing */ - FSMC_Bank1->BTCR[FSMC_Bank+1] = (6) | (10 << 8) | (10 << 16); - - /* Bank1 NOR/SRAM control register configuration - * This is actually not needed as already set by default after reset */ - FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN; - break; - } -} - -static inline void post_init_board(GDisplay *g) { - (void) g; -} - -static inline void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if(state) - palClearPad(GPIOE, GPIOE_TFT_RST); - else - palSetPad(GPIOE, GPIOE_TFT_RST); -} - -static inline void set_backlight(GDisplay *g, uint8_t percent) { - (void) g; - (void)percent; -} - -static inline void acquire_bus(GDisplay *g) { - (void) g; -} - -static inline void release_bus(GDisplay *g) { - (void) g; -} - -static inline void write_index(GDisplay *g, uint16_t index) { - (void) g; - GDISP_REG = index; -} - -static inline void write_data(GDisplay *g, uint16_t data) { - (void) g; - GDISP_RAM = data; -} - -static inline void setreadmode(GDisplay *g) { - (void) g; -} - -static inline void setwritemode(GDisplay *g) { - (void) g; -} - -static inline uint16_t read_data(GDisplay *g) { - (void) g; - return GDISP_RAM; -} - -#endif /* GDISP_LLD_BOARD_H */ -- cgit v1.2.3