From 0595ac27d5aae235e58aa17816c1fc0e7bbb5e1f Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Mon, 22 Nov 2010 05:30:20 +0000 Subject: Commit for 101122 release. --- LUFA/ManPages/MigrationInformation.txt | 45 +++++++++++++++------------------- 1 file changed, 20 insertions(+), 25 deletions(-) (limited to 'LUFA/ManPages/MigrationInformation.txt') diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt index 08c7a9f88..d12c3f9e9 100644 --- a/LUFA/ManPages/MigrationInformation.txt +++ b/LUFA/ManPages/MigrationInformation.txt @@ -10,7 +10,10 @@ * to the next version released. It does not indicate all new additions to the library in each version change, only * areas relevant to making older projects compatible with the API changes of each new release. * - * \section Sec_MigrationXXXXXX Migrating from 100807 to XXXXXX + * \section Sec_MigrationXXXXXX Migrating from 101122 to XXXXXX + * None yet. + * + * \section Sec_Migration101122 Migrating from 100807 to 101122 * USB Core * - A new USB driver source file, Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added * to all project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source @@ -52,7 +55,7 @@ * - The Still Image Host class' function prefix has been changed from "SImage_" to "SI_", to remain consistent with the rest of the * driver's enums, type defines and constants. * - * \section Sec_Migration100807 Migrating from 100513 to 100807 + * \section Sec_Migration100807 Migrating from 100513 to 100807 * * Non-USB Library Components * - The Dataflash board driver stub file has changed, as dataflash functions previously located in the internal @@ -85,7 +88,7 @@ * - The \ref CDC_Host_USBTask() now calls \ref CDC_Host_Flush() automatically, flushing any queued data to the attached device. Manual * flushing of the interface is no longer needed if the flushes should be in sync with calls to \ref CDC_Host_USBTask(). * - * \section Sec_Migration100513 Migrating from 100219 to 100513 + * \section Sec_Migration100513 Migrating from 100219 to 100513 * * Non-USB Library Components * - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed @@ -112,7 +115,7 @@ * - The HID Host Class driver's function signature for the HID_Host_SendReportByID() function has been changed, to allow for a new * ReportType parameter. Existing calls to this function should substitute REPORT_ITEM_TYPE_Out as this parameter's value. * - * \section Sec_Migration100219 Migrating from 091223 to 100219 + * \section Sec_Migration100219 Migrating from 091223 to 100219 * * Non-USB Library Components * - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models, @@ -135,7 +138,7 @@ * endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually * flush the queued event(s) to the host by calling \ref MIDI_Device_Flush(). * - * \section Sec_Migration091223 Migrating from 091122 to 091223 + * \section Sec_Migration091223 Migrating from 091122 to 091223 * * Host Mode * - The Still Image Host Class driver SI_Host_USBTask() and SI_Host_ConfigurePipes() functions were misnamed, and are @@ -150,7 +153,7 @@ * - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to * indicate the report type to generate. Existing applications may simply add and ignore this additional parameter. * - * \section Sec_Migration091122 Migrating from 090924 to 091122 + * \section Sec_Migration091122 Migrating from 090924 to 091122 * * Host Mode * - The HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow @@ -158,7 +161,7 @@ * user application, instead of just its attributes. * - The USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor(). * - * \section Sec_Migration090924 Migrating from 090810 to 090924 + * \section Sec_Migration090924 Migrating from 090810 to 090924 * * Non-USB Library Components * - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library. @@ -185,7 +188,7 @@ * and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in * the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants. * - * \section Sec_Migration090810 Migrating from 090605 to 090810 + * \section Sec_Migration090810 Migrating from 090605 to 090810 * * All * - The "Simple Scheduler" has been deprecated, as it was little more than an abstracted loop and caused much confusion. @@ -228,7 +231,7 @@ * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode * events. See the \ref Group_Events page for details on the new event names and firing conditions. * * - * \section Sec_Migration090605 Migrating from 090510 to 090605 + * \section Sec_Migration090605 Migrating from 090510 to 090605 * * Device Mode * - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing @@ -256,8 +259,7 @@ * - The DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with * regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a uint8_t value. * - * - * \section Sec_Migration090510 Migrating from 090401 to 090510 + * \section Sec_Migration090510 Migrating from 090401 to 090510 * * All * - The ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all @@ -325,8 +327,7 @@ * structure type has been renamed to USB_Request_Header_t. * - The values of the Pipe_Stream_RW_ErrorCodes_t enum have had the "ERROR_" portion of their names removed. * - * - * \section Sec_Migration090401 Migrating from 090209 to 090401 + * \section Sec_Migration090401 Migrating from 090209 to 090401 * * All * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK", @@ -352,8 +353,7 @@ * NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further * modifications required. * - * - * \section Sec_Migration090209 Migrating from 081217 to 090209 + * \section Sec_Migration090209 Migrating from 081217 to 090209 * * Device Mode * - The ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of ENDPOINT_TOTAL_ENDPOINTS. @@ -381,8 +381,7 @@ * - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to * the latest demo versions. * - * - * \section Sec_Migration171208 Migrating from V1.5.3 to 081217 + * \section Sec_Migration171208 Migrating from V1.5.3 to 081217 * * All * - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names, @@ -426,8 +425,7 @@ * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is * currently initialized. * - * - * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3 + * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3 * * Library Demos * - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number @@ -472,8 +470,7 @@ * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. * - * - * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2 + * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2 * * Library Demos * - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations @@ -482,8 +479,7 @@ * - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where * possible any existing devices upgrade to the latest bootloader code. * - * - * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1 + * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1 * * Library Demos * - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the @@ -498,8 +494,7 @@ * - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power. * Projects built upon the AudioOut demo should upgrade to the latest code. * - * - * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0 + * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0 * * Library Demos * - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To -- cgit v1.2.3