From 5b8b5018f2a7d7693a9827f9047a135ccc7cdc69 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 15 Jul 2012 18:49:42 +0000 Subject: Minor documentation improvements. --- LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h | 12 ++++++------ LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h | 12 ++++++------ LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h | 12 ++++++------ 3 files changed, 18 insertions(+), 18 deletions(-) (limited to 'LUFA/Drivers') diff --git a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h index 2d98ef4d6..eb1f928ff 100644 --- a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h @@ -336,8 +336,8 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -358,8 +358,8 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -381,7 +381,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, * discarding fully read packets from the host as needed. The device IN acknowledgement is not * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -403,7 +403,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, * discarding fully read packets from the host as needed. The device IN acknowledgement is not * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. diff --git a/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h b/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h index 3eccb7f15..551cf4b18 100644 --- a/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h @@ -336,8 +336,8 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -358,8 +358,8 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -381,7 +381,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, * discarding fully read packets from the host as needed. The device IN acknowledgement is not * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -403,7 +403,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, * discarding fully read packets from the host as needed. The device IN acknowledgement is not * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. diff --git a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h index 436752880..f2fe28991 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h @@ -336,8 +336,8 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -358,8 +358,8 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -381,7 +381,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, * discarding fully read packets from the host as needed. The device IN acknowledgement is not * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. @@ -403,7 +403,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, * discarding fully read packets from the host as needed. The device IN acknowledgement is not * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. * * \note This function automatically clears the control transfer's status stage. Do not manually attempt * to clear the status stage when using this routine in a control transaction. -- cgit v1.2.3