aboutsummaryrefslogtreecommitdiffstats
path: root/Projects/AVRISP-MKII/Lib/XPROG
Commit message (Collapse)AuthorAgeFilesLines
* Minor documentation improvements.Dean Camera2012-04-152-2/+2
|
* Make sure CRC value is pre-zeroed before reading from the XMEGA target ↵Dean Camera2012-04-151-0/+2
| | | | device, to prevent corrupt data from being returned to the host in the AVRISP-MKII Clone project.
* Reintegrate the FullEPAddresses development branch into trunk.Dean Camera2012-04-141-8/+8
|
* Reverted AVRISP-MKII clone project watchdog based command timeout patch in ↵Dean Camera2012-04-013-10/+10
| | | | favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed.
* Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI ↵Dean Camera2012-03-052-4/+4
| | | | to 32, to prevent communication errors on low quality connections to a target.
* Oops - don't reset AVRISP-MKII timeout in XPROG mode, as this is synchronous ↵Dean Camera2012-02-191-3/+0
| | | | serial and data is always received regardless of attached or non-attached target.
* Minor documentation fixes.Dean Camera2012-02-082-8/+10
| | | | Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.
* Updated the AVRISP-MKII Clone programmer project to be compatible with the ↵Dean Camera2012-02-082-0/+11
| | | | | | latest version of AVR Studio (version 5.1). Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
* Update file contributor copyrights for 2012.Dean Camera2012-02-048-8/+8
|
* Update file header copyrights for 2012.Dean Camera2012-02-048-8/+8
|
* Fixed AVRISP-MKII Clone timing out on long programming commands such as ↵Dean Camera2012-01-301-0/+3
| | | | programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
* Make all AVRISP-MKII programmer parameters readable, since there's no real ↵Dean Camera2012-01-231-2/+2
| | | | good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.
* Run wspurify script on /trunk/ and /branches/ C source files, to remove any ↵Dean Camera2011-12-234-7/+7
| | | | trailing whitespace at the end of each line.
* Fixed AVRISP-MKII Clone failing to start application firmware once a TPI ↵Dean Camera2011-11-291-3/+9
| | | | programming session is exited.
* Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI ↵Dean Camera2011-10-122-17/+21
| | | | protocols (thanks to Justin Mattair).
* Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI ↵Dean Camera2011-10-071-3/+8
| | | | protocols (thanks to Justin Mattair).
* Massive corrections to the project documentation and code comments, thanks ↵Dean Camera2011-06-052-3/+3
| | | | to Russian translation services provided by Andrey from Microsin.ru.
* Oops - revert commit of an incomplete port of the AVRISP-MKII project.Dean Camera2011-05-296-154/+98
|
* Added new incomplete AudioInputHost Host LowLevel demo.Dean Camera2011-05-296-98/+154
| | | | | | Added missing Audio class control request definitions. Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
* Replace cast-as-char* byte access of multibyte variables with proper shifts ↵Dean Camera2011-04-132-6/+6
| | | | and masks to preserve endianness across different architectures.
* Renamed all low level Endpoint_Read_*, Endpoint_Write_* and ↵Dean Camera2011-04-041-31/+31
| | | | | | Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures. Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
* Fixed programming errors in the AVRISP-MKII project when the programming ↵Dean Camera2011-02-041-0/+9
| | | | packet is a round multiple of the endpoint bank size under avrdude (thanks to Steffan Woltjer).
* Removed SerialStream module, rolled functionality into the base USART Serial ↵Dean Camera2011-01-301-1/+0
| | | | | | | | peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods. Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions. Altered the serial byte receive function to make it non-blocking.
* Changed AVRISP-MKII project to use the Watchdog interrupt for command ↵Dean Camera2011-01-224-10/+12
| | | | timeouts, to reduce CPU usage and free timer 0 for other uses in the future.
* Altered all endpoint/pipe stream transfers so that the new BytesProcessed ↵Dean Camera2011-01-101-7/+7
| | | | | | | | | | parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk). Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions. Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it. Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
* Update copyright year on all source files.Dean Camera2011-01-018-16/+16
|
* Lower bulk endpoint polling rate in the descriptors to the lowest possible ↵Dean Camera2010-11-221-1/+1
| | | | value to give maximum throughput.
* Rename incorrectly named XPROGTarget_SendBreak() function to ↵Dean Camera2010-11-172-11/+11
| | | | XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
* Fixed AVRISP-MKII clone project not starting the target's program ↵Dean Camera2010-11-167-61/+87
| | | | automatically after exiting TPI programming mode.
* Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to ↵Dean Camera2010-11-162-5/+7
| | | | | | issues with the XPLAINBridge when PDI programming at faster rates. Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
* Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII ↵Dean Camera2010-11-162-1/+5
| | | | clone programmer project (thanks to Tom Light).
* Second patch to fix incorrect PDI/TPI programming speed.Dean Camera2010-11-142-2/+1
|
* Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, ↵Dean Camera2010-11-121-1/+1
| | | | instead of the desired 500KHz.
* Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org ↵Dean Camera2010-10-288-8/+8
| | | | redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
* Clean up excessive whitespace at the end of each line using the wspurify ↵Dean Camera2010-10-138-166/+174
| | | | tool made by Laszlo Monda
* Revert change to the AVRISP-MKII project for fuse byte programming via the ↵Dean Camera2010-10-021-9/+0
| | | | CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
* Fixed broken lock byte programming in the AVRISP-MKII clone project for some ↵Dean Camera2010-10-022-3/+10
| | | | XMEGA targets.
* Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz ↵Dean Camera2010-07-291-3/+3
| | | | | | via a new software SPI driver. Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
* Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI ↵Dean Camera2010-07-221-2/+2
| | | | and TPI requests return failure.
* Update all demos, projects and bootloaders to indent all function ↵Dean Camera2010-07-212-6/+16
| | | | | | parameters, one per line, for better readability. Add missing const qualifiers to the demos.
* Remove the timeout period extension code from the AVRISP project, as no ↵Dean Camera2010-07-134-42/+15
| | | | single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
* Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather ↵Dean Camera2010-06-253-14/+4
| | | | than looping on the timeout value, as this is already checked inside the loop anyway.
* Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project.Dean Camera2010-06-172-14/+63
|
* Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as ↵Dean Camera2010-06-162-4/+4
| | | | the new 1.7 Doxygen's default stylesheet is much better.
* Change over Doxygen \note documentation to \pre where applicable.Dean Camera2010-06-151-1/+1
|
* Minor documentation cleanups.Dean Camera2010-06-031-2/+2
|
* Fixed AVRISP project not sending a full erase-and-write EEPROM command to ↵Dean Camera2010-05-161-1/+1
| | | | XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
* Fixed AVRISP-MKII clone project not correctly issuing SET EXTENDED ADDRESS ↵Dean Camera2010-05-133-3/+3
| | | | | | commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton). Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
* Add svn:eol-style property to source files, so that the line endings are ↵Dean Camera2010-05-088-1788/+1788
| | | | correctly converted to the target system's native end of line style.
* Removed software PDI/TPI emulation from the AVRISP-MKII clone project, as it ↵Dean Camera2010-05-042-270/+1
| | | | was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-12 20:01:43 +0000