aboutsummaryrefslogtreecommitdiffstats
path: root/Projects
diff options
context:
space:
mode:
Diffstat (limited to 'Projects')
-rw-r--r--Projects/AVRISP/AVRISP.c24
-rw-r--r--Projects/AVRISP/Lib/V2Protocol.c16
-rw-r--r--Projects/AVRISP/Lib/V2ProtocolParams.c36
-rw-r--r--Projects/AVRISP/Lib/V2ProtocolParams.h32
-rw-r--r--Projects/AVRISP/Lib/V2ProtocolTarget.c4
-rw-r--r--Projects/Benito/Lib/RingBuff.c4
-rw-r--r--Projects/Magstripe/Lib/MagstripeHW.h200
-rw-r--r--Projects/USBtoSerial/Lib/RingBuff.c4
8 files changed, 160 insertions, 160 deletions
diff --git a/Projects/AVRISP/AVRISP.c b/Projects/AVRISP/AVRISP.c
index 4eb02d2bf..203fced45 100644
--- a/Projects/AVRISP/AVRISP.c
+++ b/Projects/AVRISP/AVRISP.c
@@ -48,7 +48,7 @@ int main(void)
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
- {
+ {
Process_AVRISP_Commands();
V2Params_UpdateParamValues();
@@ -111,20 +111,20 @@ void EVENT_USB_Device_ConfigurationChanged(void)
}
}
-/** Processes incomming V2 Protocol commands from the host, returning a response when required. */
-void Process_AVRISP_Commands(void)
-{
+/** Processes incoming V2 Protocol commands from the host, returning a response when required. */
+void Process_AVRISP_Commands(void)
+{
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
-
+ return;
+
Endpoint_SelectEndpoint(AVRISP_DATA_EPNUM);
-
- /* Check to see if a V2 Protocol command has been received */
+
+ /* Check to see if a V2 Protocol command has been received */
if (Endpoint_IsOUTReceived())
- {
- /* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
+ {
+ /* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
V2Protocol_ProcessCommand();
}
-}
-
+}
+
diff --git a/Projects/AVRISP/Lib/V2Protocol.c b/Projects/AVRISP/Lib/V2Protocol.c
index d7343aad6..d03bd8924 100644
--- a/Projects/AVRISP/Lib/V2Protocol.c
+++ b/Projects/AVRISP/Lib/V2Protocol.c
@@ -36,12 +36,12 @@
#define INCLUDE_FROM_V2PROTOCOL_C
#include "V2Protocol.h"
-/** Master V2 Protocol packet handler, for receieved V2 Protocol packets from a connected host.
+/** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.
* This routine decodes the issued command and passes off the handling of the command to the
* appropriate function.
*/
-void V2Protocol_ProcessCommand(void)
-{
+void V2Protocol_ProcessCommand(void)
+{
uint8_t V2Command = Endpoint_Read_Byte();
switch (V2Command)
@@ -95,8 +95,8 @@ void V2Protocol_ProcessCommand(void)
}
Endpoint_WaitUntilReady();
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
-}
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
+}
/** Handler for unknown V2 protocol commands. This discards all sent data and returns a
* STATUS_CMD_UNKNOWN status back to the host.
@@ -105,7 +105,7 @@ void V2Protocol_ProcessCommand(void)
*/
static void V2Protocol_Command_Unknown(uint8_t V2Command)
{
- /* Discard all incomming data */
+ /* Discard all incoming data */
while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)
{
Endpoint_ClearOUT();
@@ -120,7 +120,7 @@ static void V2Protocol_Command_Unknown(uint8_t V2Command)
Endpoint_ClearIN();
}
-/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
+/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
static void V2Protocol_Command_SignOn(void)
{
Endpoint_ClearOUT();
@@ -151,7 +151,7 @@ static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
Endpoint_Write_Byte(V2Command);
- uint8_t ParamPrivs = V2Params_GetParameterPrivellages(ParamID);
+ uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);
if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
{
diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.c b/Projects/AVRISP/Lib/V2ProtocolParams.c
index 6b4568a94..62149b4c3 100644
--- a/Projects/AVRISP/Lib/V2ProtocolParams.c
+++ b/Projects/AVRISP/Lib/V2ProtocolParams.c
@@ -44,43 +44,43 @@ static ParameterItem_t ParameterTable[] =
{
{ .ParamID = PARAM_BUILD_NUMBER_LOW,
.ParamValue = (LUFA_VERSION_INTEGER >> 8),
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_BUILD_NUMBER_HIGH,
.ParamValue = (LUFA_VERSION_INTEGER & 0xFF),
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_HW_VER,
.ParamValue = 0x00,
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_SW_MAJOR,
.ParamValue = 0x01,
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_SW_MINOR,
.ParamValue = 0x0C,
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_VTARGET,
.ParamValue = 0x32,
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_SCK_DURATION,
.ParamValue = (TOTAL_PROGRAMMING_SPEEDS - 1),
- .ParamPrivellages = PARAM_PRIV_READ | PARAM_PRIV_WRITE },
+ .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE },
{ .ParamID = PARAM_RESET_POLARITY,
.ParamValue = 0x00,
- .ParamPrivellages = PARAM_PRIV_WRITE },
+ .ParamPrivileges = PARAM_PRIV_WRITE },
{ .ParamID = PARAM_STATUS_TGT_CONN,
.ParamValue = 0x00,
- .ParamPrivellages = PARAM_PRIV_READ },
+ .ParamPrivileges = PARAM_PRIV_READ },
{ .ParamID = PARAM_DISCHARGEDELAY,
.ParamValue = 0x00,
- .ParamPrivellages = PARAM_PRIV_WRITE },
+ .ParamPrivileges = PARAM_PRIV_WRITE },
};
@@ -104,22 +104,22 @@ void V2Params_UpdateParamValues(void)
#endif
}
-/** Retrieves the host PC read/write privellages for a given parameter in the parameter table. This should
+/** Retrieves the host PC read/write privileges for a given parameter in the parameter table. This should
* be called before calls to \ref V2Params_GetParameterValue() or \ref V2Params_SetParameterValue() when
* getting or setting parameter values in response to requests from the host.
*
- * \param[in] ParamID Parameter ID whose privellages are to be retrieved from the table
+ * \param[in] ParamID Parameter ID whose privileges are to be retrieved from the table
*
- * \return Privellages for the requested parameter, as a mask of PARAM_PRIV_* masks
+ * \return Privileges for the requested parameter, as a mask of PARAM_PRIV_* masks
*/
-uint8_t V2Params_GetParameterPrivellages(uint8_t ParamID)
+uint8_t V2Params_GetParameterPrivileges(uint8_t ParamID)
{
ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
if (ParamInfo == NULL)
return 0;
- return ParamInfo->ParamPrivellages;
+ return ParamInfo->ParamPrivileges;
}
/** Retrieves the current value for a given parameter in the parameter table.
@@ -132,7 +132,7 @@ uint8_t V2Params_GetParameterValue(uint8_t ParamID)
{
ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
- if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivellages & PARAM_PRIV_READ))
+ if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivileges & PARAM_PRIV_READ))
return 0;
return ParamInfo->ParamValue;
@@ -149,7 +149,7 @@ void V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value)
{
ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
- if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivellages & PARAM_PRIV_WRITE))
+ if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivileges & PARAM_PRIV_WRITE))
return;
ParamInfo->ParamValue = Value;
@@ -159,7 +159,7 @@ void V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value)
eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
}
-/** Retrieves a parameter entry (including ID, value and privellages) from the parameter table that matches the given
+/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
* parameter ID.
*
* \param[in] ParamID Parameter ID to find in the table
diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.h b/Projects/AVRISP/Lib/V2ProtocolParams.h
index 9ad84e7a3..b27a4ea94 100644
--- a/Projects/AVRISP/Lib/V2ProtocolParams.h
+++ b/Projects/AVRISP/Lib/V2ProtocolParams.h
@@ -33,14 +33,14 @@
* Header file for V2ProtocolParams.c.
*/
-#ifndef _V2_PROTOCOL_PARAMS_
-#define _V2_PROTOCOL_PARAMS_
-
- /* Includes: */
+#ifndef _V2_PROTOCOL_PARAMS_
+#define _V2_PROTOCOL_PARAMS_
+
+ /* Includes: */
#include <avr/io.h>
- #include <avr/eeprom.h>
+ #include <avr/eeprom.h>
- #include <LUFA/Version.h>
+ #include <LUFA/Version.h>
#if defined(ADC)
#include <LUFA/Drivers/Peripheral/ADC.h>
@@ -50,32 +50,32 @@
#include "V2ProtocolConstants.h"
/* Macros: */
- /** Parameter privellage mask to allow the host PC to read the parameter's value */
+ /** Parameter privilege mask to allow the host PC to read the parameter's value */
#define PARAM_PRIV_READ (1 << 0)
- /** Parameter privellage mask to allow the host PC to change the parameter's value */
+ /** Parameter privilege mask to allow the host PC to change the parameter's value */
#define PARAM_PRIV_WRITE (1 << 1)
-
+
/* Type Defines: */
/** Type define for a parameter table entry indicating a PC readable or writable device parameter. */
typedef struct
{
const uint8_t ParamID; /**< Parameter ID number to uniquely identify the parameter within the device */
uint8_t ParamValue; /**< Current parameter's value within the device */
- uint8_t ParamPrivellages; /**< Parameter privellages to allow the host to read or write the parameter's value */
- } ParameterItem_t;
-
+ uint8_t ParamPrivileges; /**< Parameter privileges to allow the host to read or write the parameter's value */
+ } ParameterItem_t;
+
/* Function Prototypes: */
void V2Params_LoadNonVolatileParamValues(void);
void V2Params_UpdateParamValues(void);
- uint8_t V2Params_GetParameterPrivellages(uint8_t ParamID);
+ uint8_t V2Params_GetParameterPrivileges(uint8_t ParamID);
uint8_t V2Params_GetParameterValue(uint8_t ParamID);
void V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value);
#if defined(INCLUDE_FROM_V2PROTOCOL_PARAMS_C)
static ParameterItem_t* V2Params_GetParamFromTable(uint8_t ParamID);
#endif
-
-#endif
-
+
+#endif
+
diff --git a/Projects/AVRISP/Lib/V2ProtocolTarget.c b/Projects/AVRISP/Lib/V2ProtocolTarget.c
index 169e49ac7..80e8be1e8 100644
--- a/Projects/AVRISP/Lib/V2ProtocolTarget.c
+++ b/Projects/AVRISP/Lib/V2ProtocolTarget.c
@@ -45,7 +45,7 @@ uint32_t CurrentAddress;
*/
uint8_t V2Protocol_GetSPIPrescalerMask(void)
{
- static const uint8_t SPIMaskFromSCKDuration[TOTAL_PROGRAMMING_SPEEDS] =
+ static const uint8_t SPIMaskFromSCKDuration[] =
{
#if (F_CPU == 8000000)
SPI_SPEED_FCPU_DIV_2, // AVRStudio = 8MHz SPI, Actual = 4MHz SPI
@@ -77,7 +77,7 @@ uint8_t V2Protocol_GetSPIPrescalerMask(void)
}
/** Asserts or deasserts the target's reset line, using the correct polarity as set by the host using a SET PARAM command.
- * When not asserted, the line is tristated so as not to intefere with normal device operation.
+ * When not asserted, the line is tristated so as not to interfere with normal device operation.
*
* \param[in] ResetTarget Boolean true when the target should be held in reset, false otherwise
*/
diff --git a/Projects/Benito/Lib/RingBuff.c b/Projects/Benito/Lib/RingBuff.c
index 1f477f17a..0dd4a06bb 100644
--- a/Projects/Benito/Lib/RingBuff.c
+++ b/Projects/Benito/Lib/RingBuff.c
@@ -83,7 +83,7 @@ RingBuff_Data_t Buffer_GetElement(RingBuff_t* Buffer)
if (!(Buffer->Elements))
return 0;
#elif !defined(BUFF_NOEMPTYCHECK)
- #error No empty buffer check behaviour specified.
+ #error No empty buffer check behavior specified.
#endif
BuffData = *(Buffer->OutPtr);
@@ -109,7 +109,7 @@ RingBuff_Data_t Buffer_PeekElement(const RingBuff_t* Buffer)
if (!(Buffer->Elements))
return 0;
#elif !defined(BUFF_NOEMPTYCHECK)
- #error No empty buffer check behaviour specified.
+ #error No empty buffer check behavior specified.
#endif
BuffData = *(Buffer->OutPtr);
diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h
index c4681188a..7561e18e3 100644
--- a/Projects/Magstripe/Lib/MagstripeHW.h
+++ b/Projects/Magstripe/Lib/MagstripeHW.h
@@ -1,100 +1,100 @@
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/*
- NOTE: The user of this include file MUST define the following macros
- prior to including the file:
-
- MAG_T1_CLOCK_PIN Pin connected to Track 1 clock wire (ie. PORTC1)
- MAG_T1_DATA_PIN Pin connected to Track 1 data wire (ie. PORTC2)
- MAG_T2_CLOCK_PIN Pin connected to Track 2 clock wire (ie. PORTC3)
- MAG_T2_DATA_PIN Pin connected to Track 2 data wire (ie. PORTC0)
- MAG_T3_CLOCK_PIN Pin connected to Track 3 clock wire (ie. PORTC5)
- MAG_T3_DATA_PIN Pin connected to Track 3 data wire (ie. PORTC6)
- MAG_CLS_PIN Pin connected to card loaded wire (ie. PORTC4)
- MAG_PIN PIN macro for the reader's port (ie. PINC)
- MAG_DDR DDR macro for the reader's port (ie. DDRC)
- MAG_PORT PORT macro for the reader's port (ie. PORTC)
-
- The example macros listed above assume that the Track 2 data wire is
- connected to pin 0 on port C, the Track 2 clock wire is connected to
- pin 3 on port C (similarly for Tracks 1 and 3), and the card loaded
- wire is connected to pin 4 on port C.
-
- If the magstripe reader you are using only reads one or two tracks,
- then set the clock and data pins for the tracks it doesn't read to a
- pin that is unused. For example, on the AT90USBKey, any of the pins on
- port C that do not have wires attached will be unused since they are
- not connected to any onboard devices (such as the joystick or
- temperature sensor).
-
- Connecting wires to pins on different ports (ie. a data wire to pin 0
- on port C and a clock wire to pin 0 on port D) is currently
- unsupported. All pins specified above must be on the same port.
-*/
-
-/** \file
- *
- * Driver header for a TTL Magnetic Card reader device (such as the Omron V3B-4K).
- */
-
-#ifndef _MAGSTRIPEHW_H_
-#define _MAGSTRIPEHW_H_
-
- /* Includes: */
- #include <avr/io.h>
-
- #include <LUFA/Common/Common.h>
-
- /* Private Interface - For use in library only: */
- /* Macros: */
- /** Mask of the track data, clock and card detection pins. */
- #define MAG_MASK (MAG_T1_DATA | MAG_T1_CLOCK | \
- MAG_T2_DATA | MAG_T2_CLOCK | \
- MAG_T3_DATA | MAG_T3_CLOCK | \
- MAG_CARDPRESENT)
-
- /* Public Interface - May be used in end-application: */
- /* Inline Functions: */
- /** Initializes the magnetic stripe card reader ports and pins so that the card reader
- * device can be controlled and read by the card reader driver. This must be called before
- * trying to read any of the card reader's status lines.
- */
- static inline void Magstripe_Init(void)
- {
- MAG_DDR &= ~MAG_MASK;
- MAG_PORT |= MAG_MASK;
- };
-
- /** Returns the status of all the magnetic card reader's outputs.
- *
- * \return A mask indicating which card lines are high or low
- */
- static inline uint8_t Magstripe_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Magstripe_GetStatus(void)
- {
- /* Magstripe IOs are active low and must be inverted when read */
- return ((uint8_t)~MAG_PIN & MAG_MASK);
- }
-
-#endif
+/*
+ Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/*
+ NOTE: The user of this include file MUST define the following macros
+ prior to including the file:
+
+ MAG_T1_CLOCK_PIN Pin connected to Track 1 clock wire (i.e.. PORTC1)
+ MAG_T1_DATA_PIN Pin connected to Track 1 data wire (i.e.. PORTC2)
+ MAG_T2_CLOCK_PIN Pin connected to Track 2 clock wire (i.e.. PORTC3)
+ MAG_T2_DATA_PIN Pin connected to Track 2 data wire (i.e.. PORTC0)
+ MAG_T3_CLOCK_PIN Pin connected to Track 3 clock wire (i.e.. PORTC5)
+ MAG_T3_DATA_PIN Pin connected to Track 3 data wire (i.e.. PORTC6)
+ MAG_CLS_PIN Pin connected to card loaded wire (i.e.. PORTC4)
+ MAG_PIN PIN macro for the reader's port (i.e.. PINC)
+ MAG_DDR DDR macro for the reader's port (i.e.. DDRC)
+ MAG_PORT PORT macro for the reader's port (i.e.. PORTC)
+
+ The example macros listed above assume that the Track 2 data wire is
+ connected to pin 0 on port C, the Track 2 clock wire is connected to
+ pin 3 on port C (similarly for Tracks 1 and 3), and the card loaded
+ wire is connected to pin 4 on port C.
+
+ If the mag-stripe reader you are using only reads one or two tracks,
+ then set the clock and data pins for the tracks it doesn't read to a
+ pin that is unused. For example, on the AT90USBKey, any of the pins on
+ port C that do not have wires attached will be unused since they are
+ not connected to any onboard devices (such as the joystick or
+ temperature sensor).
+
+ Connecting wires to pins on different ports (i.e.. a data wire to pin 0
+ on port C and a clock wire to pin 0 on port D) is currently
+ unsupported. All pins specified above must be on the same port.
+*/
+
+/** \file
+ *
+ * Driver header for a TTL Magnetic Card reader device (such as the Omron V3B-4K).
+ */
+
+#ifndef _MAGSTRIPEHW_H_
+#define _MAGSTRIPEHW_H_
+
+ /* Includes: */
+ #include <avr/io.h>
+
+ #include <LUFA/Common/Common.h>
+
+ /* Private Interface - For use in library only: */
+ /* Macros: */
+ /** Mask of the track data, clock and card detection pins. */
+ #define MAG_MASK (MAG_T1_DATA | MAG_T1_CLOCK | \
+ MAG_T2_DATA | MAG_T2_CLOCK | \
+ MAG_T3_DATA | MAG_T3_CLOCK | \
+ MAG_CARDPRESENT)
+
+ /* Public Interface - May be used in end-application: */
+ /* Inline Functions: */
+ /** Initializes the magnetic stripe card reader ports and pins so that the card reader
+ * device can be controlled and read by the card reader driver. This must be called before
+ * trying to read any of the card reader's status lines.
+ */
+ static inline void Magstripe_Init(void)
+ {
+ MAG_DDR &= ~MAG_MASK;
+ MAG_PORT |= MAG_MASK;
+ };
+
+ /** Returns the status of all the magnetic card reader's outputs.
+ *
+ * \return A mask indicating which card lines are high or low
+ */
+ static inline uint8_t Magstripe_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t Magstripe_GetStatus(void)
+ {
+ /* Mag-stripe IOs are active low and must be inverted when read */
+ return ((uint8_t)~MAG_PIN & MAG_MASK);
+ }
+
+#endif
diff --git a/Projects/USBtoSerial/Lib/RingBuff.c b/Projects/USBtoSerial/Lib/RingBuff.c
index 1f477f17a..0dd4a06bb 100644
--- a/Projects/USBtoSerial/Lib/RingBuff.c
+++ b/Projects/USBtoSerial/Lib/RingBuff.c
@@ -83,7 +83,7 @@ RingBuff_Data_t Buffer_GetElement(RingBuff_t* Buffer)
if (!(Buffer->Elements))
return 0;
#elif !defined(BUFF_NOEMPTYCHECK)
- #error No empty buffer check behaviour specified.
+ #error No empty buffer check behavior specified.
#endif
BuffData = *(Buffer->OutPtr);
@@ -109,7 +109,7 @@ RingBuff_Data_t Buffer_PeekElement(const RingBuff_t* Buffer)
if (!(Buffer->Elements))
return 0;
#elif !defined(BUFF_NOEMPTYCHECK)
- #error No empty buffer check behaviour specified.
+ #error No empty buffer check behavior specified.
#endif
BuffData = *(Buffer->OutPtr);
generated by cgit v1.2.3 (git 2.25.1) at 2025-11-04 01:07:18 +0000