diff options
Diffstat (limited to 'Demos/Host/LowLevel')
28 files changed, 381 insertions, 810 deletions
diff --git a/Demos/Host/LowLevel/CDCHost/CDCHost.c b/Demos/Host/LowLevel/CDCHost/CDCHost.c index b83473106..9a5e81ae4 100644 --- a/Demos/Host/LowLevel/CDCHost/CDCHost.c +++ b/Demos/Host/LowLevel/CDCHost/CDCHost.c @@ -36,19 +36,28 @@ #include "CDCHost.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_CDC_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "CDC Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ CDC_Host_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -59,22 +68,7 @@ int main(void) /* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "CDC Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -83,10 +77,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -94,12 +85,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop keyboard and USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_CDC_Host, TASK_STOP);
-
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -107,11 +94,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Start CDC Host task */
- Scheduler_SetTaskMode(USB_CDC_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -122,7 +105,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -136,44 +119,13 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the CDCHost_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read in
* data received from the attached CDC device and print it to the serial port.
*/
-TASK(USB_CDC_Host)
+void CDC_Host_Task(void)
{
uint8_t ErrorCode;
@@ -200,7 +152,7 @@ TASK(USB_CDC_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -223,7 +175,7 @@ TASK(USB_CDC_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
diff --git a/Demos/Host/LowLevel/CDCHost/CDCHost.h b/Demos/Host/LowLevel/CDCHost/CDCHost.h index afec780e7..5dcbc8e8e 100644 --- a/Demos/Host/LowLevel/CDCHost/CDCHost.h +++ b/Demos/Host/LowLevel/CDCHost/CDCHost.h @@ -43,12 +43,11 @@ #include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
#include "ConfigDescriptor.h"
@@ -62,27 +61,26 @@ /** Pipe number for the CDC notification pipe */
#define CDC_NOTIFICATIONPIPE 3
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum CDCHost_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- };
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
- /* Task Definitions: */
- TASK(USB_CDC_Host);
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+
/* Function Prototypes: */
+ void SetupHardware(void);
+ void CDC_Host_Task(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
-
- void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Host/LowLevel/CDCHost/makefile b/Demos/Host/LowLevel/CDCHost/makefile index f1255aad2..dfbefbb80 100644 --- a/Demos/Host/LowLevel/CDCHost/makefile +++ b/Demos/Host/LowLevel/CDCHost/makefile @@ -119,13 +119,12 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -138,7 +137,6 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c index e731f90cf..ac764fad0 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c @@ -36,45 +36,39 @@ #include "GenericHIDHost.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_HID_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ HID_Host_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
-
+
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -83,10 +77,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -94,12 +85,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop HID and USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_HID_Host, TASK_STOP);
-
puts_P(PSTR("Device Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -107,11 +94,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Start HID Host task */
- Scheduler_SetTaskMode(USB_HID_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -122,7 +105,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -136,38 +119,7 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the GenericHIDHost_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Reads in and processes the next report from the attached device, displaying the report
@@ -273,7 +225,7 @@ void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t Report /** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* HID reports from the device and to send reports if desired.
*/
-TASK(USB_HID_Host)
+void HID_Host_Task(void)
{
uint8_t ErrorCode;
@@ -301,7 +253,7 @@ TASK(USB_HID_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -324,7 +276,7 @@ TASK(USB_HID_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h index 7e2f8b822..415dae023 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h @@ -44,12 +44,11 @@ #include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
#include "ConfigDescriptor.h"
@@ -69,28 +68,28 @@ /** HID Report type specifier, for feature reports to a device */
#define HID_REPORTTYPE_FEATURE 0x03
- /* Task Definitions: */
- TASK(USB_HID_Host);
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum GenricHIDHost_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- };
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+
/* Function Prototypes: */
+ void SetupHardware(void);
+ void HID_Host_Task(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
- void UpdateStatus(uint8_t CurrentStatus);
void ReadNextReport(void);
void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t ReportType, uint16_t ReportLength);
diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile index b912b2ff8..a07acb438 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/makefile +++ b/Demos/Host/LowLevel/GenericHIDHost/makefile @@ -119,13 +119,12 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c index 2b9bb2b0b..64bcf0906 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c @@ -36,19 +36,28 @@ #include "KeyboardHost.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_Keyboard_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Keyboard HID Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ Keyboard_HID_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -59,22 +68,7 @@ int main(void) /* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -83,10 +77,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -94,12 +85,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop Keyboard and USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_STOP);
-
puts_P(PSTR("Device Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -107,11 +94,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Start Keyboard Host task */
- Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -122,7 +105,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -136,38 +119,7 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the KeyboardHost_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Reads in and processes the next report from the attached device, displaying the report
@@ -238,7 +190,7 @@ void ReadNextReport(void) /** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* HID reports from the device and display the results onto the board LEDs.
*/
-TASK(USB_Keyboard_Host)
+void Keyboard_HID_Task(void)
{
uint8_t ErrorCode;
@@ -265,7 +217,7 @@ TASK(USB_Keyboard_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -288,7 +240,7 @@ TASK(USB_Keyboard_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -315,7 +267,7 @@ TASK(USB_Keyboard_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h index d00b76afb..4aa09e1b7 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h @@ -44,12 +44,11 @@ #include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
#include "ConfigDescriptor.h"
@@ -60,6 +59,18 @@ /** HID Class Specific request to set the report protocol mode */
#define REQ_SetProtocol 0x0B
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+
/* Type Defines: */
/** Type define for a standard Boot Protocol Keyboard report */
typedef struct
@@ -69,28 +80,15 @@ uint8_t KeyCode; /**< Key code of the currently pressed key */
} USB_KeyboardReport_Data_t;
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum KeyboardHost_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- };
-
- /* Task Definitions: */
- TASK(USB_Keyboard_Host);
-
/* Function Prototypes: */
+ void Keyboard_HID_Task(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
- void UpdateStatus(uint8_t CurrentStatus);
void ReadNextReport(void);
#endif
diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile index b8cb79c5c..6e005da0a 100644 --- a/Demos/Host/LowLevel/KeyboardHost/makefile +++ b/Demos/Host/LowLevel/KeyboardHost/makefile @@ -119,13 +119,12 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -138,7 +137,6 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h index 20968872e..a141ffb8c 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h @@ -37,7 +37,8 @@ #define _HID_REPORT_H_
/* Includes: */
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/USB/Class/Host/HIDParser.h>
#include "KeyboardHostWithParser.h"
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c index 840cb90cf..620f158e0 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -36,19 +36,28 @@ #include "KeyboardHostWithParser.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_Keyboard_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Keyboard HID Parser Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ Keyboard_HID_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -59,22 +68,7 @@ int main(void) /* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -83,10 +77,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -94,12 +85,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop keyboard and USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_STOP);
-
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -107,11 +94,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Start Keyboard Host task */
- Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -122,7 +105,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -136,47 +119,13 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the KeyboardHostWithParser_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- case Status_Busy:
- LEDMask = (LEDS_LED1 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* the HID report descriptor and HID reports from the device and display the results onto the board LEDs.
*/
-TASK(USB_Keyboard_Host)
+void Keyboard_HID_Task(void)
{
uint8_t ErrorCode;
@@ -203,7 +152,7 @@ TASK(USB_Keyboard_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -226,7 +175,7 @@ TASK(USB_Keyboard_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -235,9 +184,6 @@ TASK(USB_Keyboard_Host) puts_P(PSTR("Processing HID Report.\r\n"));
- /* LEDs one and two on to indicate busy processing */
- UpdateStatus(Status_Busy);
-
/* Get and process the device's first HID report descriptor */
if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
{
@@ -245,15 +191,12 @@ TASK(USB_Keyboard_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
-
- /* All LEDs off - ready to indicate key presses */
- UpdateStatus(Status_USBReady);
puts_P(PSTR("Keyboard Enumerated.\r\n"));
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h index acb5b8b3e..90db94a2a 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h @@ -38,12 +38,11 @@ #include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h> #include "ConfigDescriptor.h"
#include "HIDReport.h"
@@ -52,29 +51,28 @@ /** Pipe number for the keyboard report data pipe */
#define KEYBOARD_DATAPIPE 1
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum KeyboardHostWithParser_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- Status_Busy = 5, /**< Busy dumping HID report items to the serial port */
- };
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
- /* Task Definitions: */
- TASK(USB_Keyboard_Host);
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+
/* Function Prototypes: */
+ void Keyboard_HID_Task(void);
+ void SetupHardware(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
- void UpdateStatus(uint8_t CurrentStatus);
void ProcessKeyboardReport(uint8_t* KeyboardReport);
#endif
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile index 0d09178dd..393551268 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile @@ -119,14 +119,13 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
HIDReport.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -139,7 +138,7 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c index f47e9f5ed..95aafca8c 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c +++ b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c @@ -119,10 +119,10 @@ static uint8_t MassStore_WaitForDataReceived(void) while (!(Pipe_IsINReceived()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
- if (FrameElapsed)
+ if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timeout period counter */
- FrameElapsed = false;
+ USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c index a2e6631e2..6810320e8 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c @@ -36,13 +36,6 @@ #include "MassStorageHost.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_MassStore_Host , .TaskStatus = TASK_STOP },
-};
-
/* Globals */
/** Index of the highest available LUN (Logical Unit) in the attached Mass Storage Device */
uint8_t MassStore_MaxLUNIndex;
@@ -53,6 +46,23 @@ uint8_t MassStore_MaxLUNIndex; */
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Mass Storage Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ MassStorage_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -64,22 +74,6 @@ int main(void) SerialStream_Init(9600, false);
LEDs_Init();
Buttons_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "MassStore Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
- USB_Init();
-
- /* Scheduling routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -88,10 +82,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -99,12 +90,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop USB management and Mass Storage tasks */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_MassStore_Host, TASK_STOP);
-
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -112,11 +99,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Once device is fully enumerated, start the Mass Storage Host task */
- Scheduler_SetTaskMode(USB_MassStore_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -127,7 +110,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -141,13 +124,13 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read in blocks from
* the device and print them to the serial port.
*/
-TASK(USB_MassStore_Host)
+void MassStorage_Task(void)
{
uint8_t ErrorCode;
@@ -174,7 +157,7 @@ TASK(USB_MassStore_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -197,7 +180,7 @@ TASK(USB_MassStore_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -210,7 +193,7 @@ TASK(USB_MassStore_Host) break;
case HOST_STATE_Ready:
/* Indicate device busy via the status LEDs */
- UpdateStatus(Status_Busy);
+ LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
/* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)
@@ -354,7 +337,7 @@ TASK(USB_MassStore_Host) }
/* Indicate device no longer busy */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -363,41 +346,6 @@ TASK(USB_MassStore_Host) }
}
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the MassStorageHost_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- case Status_SCSICommandError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- case Status_Busy:
- LEDMask = (LEDS_LED1 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
-}
-
/** Indicates that a communication error has occurred with the attached Mass Storage Device,
* printing error codes to the serial port and waiting until the device is removed before
* continuing.
@@ -424,7 +372,7 @@ void ShowDiskReadError(char* CommandString, bool FailedAtSCSILayer, uint8_t Erro Pipe_Freeze();
/* Indicate device error via the status LEDs */
- UpdateStatus(Status_SCSICommandError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h index 6e1e5cd9e..a299b7008 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h @@ -54,25 +54,27 @@ #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
#include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
#include <LUFA/Drivers/Board/Buttons.h> // Board Buttons driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum MassStorageHost_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- Status_Busy = 5, /**< Busy reading or writing to the attached Mass Storage device */
- Status_SCSICommandError = 6, /**< Error sending or receiving a command to or from the attached SCSI device */
- };
+ /* Macros: */
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
- /* Task Definitions: */
- TASK(USB_MassStore_Host);
-
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+ #define LEDMASK_USB_BUSY (LEDS_LED2)
+
/* Function Prototypes: */
+ void MassStorage_Task(void);
+ void SetupHardware(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
@@ -80,6 +82,5 @@ void EVENT_USB_DeviceEnumerationComplete(void);
void ShowDiskReadError(char* CommandString, bool FailedAtSCSILayer, uint8_t ErrorCode);
- void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile index f50f59887..709f42f61 100644 --- a/Demos/Host/LowLevel/MassStorageHost/makefile +++ b/Demos/Host/LowLevel/MassStorageHost/makefile @@ -119,14 +119,13 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
Lib/MassStoreCommands.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -139,7 +138,6 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.c b/Demos/Host/LowLevel/MouseHost/MouseHost.c index 7db95808a..9b4db3086 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.c +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.c @@ -36,19 +36,28 @@ #include "MouseHost.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_Mouse_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Mouse HID Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ Mouse_HID_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -59,22 +68,7 @@ int main(void) /* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "Mouse Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -83,10 +77,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -94,12 +85,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop mouse and USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_Mouse_Host, TASK_STOP);
-
puts_P(PSTR("Device Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -107,11 +94,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Start Mouse Host task */
- Scheduler_SetTaskMode(USB_Mouse_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -122,7 +105,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -136,38 +119,7 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the MouseHost_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Reads in and processes the next report from the attached device, displaying the report
@@ -233,7 +185,7 @@ void ReadNextReport(void) /** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* HID reports from the device and display the results onto the board LEDs.
*/
-TASK(USB_Mouse_Host)
+void Mouse_HID_Task(void)
{
uint8_t ErrorCode;
@@ -261,7 +213,7 @@ TASK(USB_Mouse_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -284,7 +236,7 @@ TASK(USB_Mouse_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -311,7 +263,7 @@ TASK(USB_Mouse_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error status */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.h b/Demos/Host/LowLevel/MouseHost/MouseHost.h index 7111218ba..1abd56068 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.h +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.h @@ -44,12 +44,11 @@ #include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
#include "ConfigDescriptor.h"
@@ -60,6 +59,18 @@ /** HID Class Specific request to set the report protocol mode */
#define REQ_SetProtocol 0x0B
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+
/* Type Defines: */
/** Type define for a standard Boot Protocol Mouse report */
typedef struct
@@ -69,28 +80,16 @@ int8_t Y; /**< Current delta Y movement on the mouse */
} USB_MouseReport_Data_t;
- /* Task Definitions: */
- TASK(USB_Mouse_Host);
-
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum MouseHost_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- };
-
/* Function Prototypes: */
+ void Mouse_HID_Task(void);
+ void SetupHardware(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
- void UpdateStatus(uint8_t CurrentStatus);
void ReadNextReport(void);
#endif
diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile index b7bad9400..67e05a63a 100644 --- a/Demos/Host/LowLevel/MouseHost/makefile +++ b/Demos/Host/LowLevel/MouseHost/makefile @@ -119,13 +119,12 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -138,7 +137,6 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h b/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h index b24885544..f5429f0a9 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h @@ -37,7 +37,8 @@ #define _HID_REPORT_H_
/* Includes: */
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/USB/Class/Host/HIDParser.h>
#include "MouseHostWithParser.h"
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c index f26e9e2a6..3ef5503b3 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c @@ -36,19 +36,28 @@ #include "MouseHostWithParser.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_Mouse_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Mouse HID Parser Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ Mouse_HID_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -59,22 +68,7 @@ int main(void) /* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "Mouse Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -83,10 +77,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -94,12 +85,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop mouse and USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_Mouse_Host, TASK_STOP);
-
puts_P(PSTR("Device Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -107,11 +94,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Start Mouse Host task */
- Scheduler_SetTaskMode(USB_Mouse_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -122,7 +105,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -136,47 +119,13 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the MouseHostWithParser_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- case Status_Busy:
- LEDMask = (LEDS_LED1 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
* the HID report descriptor and HID reports from the device and display the results onto the board LEDs.
*/
-TASK(USB_Mouse_Host)
+void Mouse_HID_Task(void)
{
uint8_t ErrorCode;
@@ -204,8 +153,8 @@ TASK(USB_Mouse_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
-
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
@@ -227,7 +176,7 @@ TASK(USB_Mouse_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -236,9 +185,6 @@ TASK(USB_Mouse_Host) puts_P(PSTR("Processing HID Report.\r\n"));
- /* LEDs one and two on to indicate busy processing */
- UpdateStatus(Status_Busy);
-
/* Get and process the device's first HID report descriptor */
if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
{
@@ -246,15 +192,12 @@ TASK(USB_Mouse_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
break;
}
-
- /* All LEDs off - ready to indicate key presses */
- UpdateStatus(Status_USBReady);
puts_P(PSTR("Mouse Enumerated.\r\n"));
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h index f2cc2fd00..b91d6d1a8 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h @@ -38,12 +38,11 @@ #include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
#include "ConfigDescriptor.h"
#include "HIDReport.h"
@@ -52,29 +51,28 @@ /** Pipe number for the mouse report data pipe */
#define MOUSE_DATAPIPE 1
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum MouseHostWithParser_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- Status_Busy = 5, /**< Busy dumping HID report items to the serial port */
- };
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
- /* Task Definitions: */
- TASK(USB_Mouse_Host);
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
+ void Mouse_HID_Task(void);
+ void SetupHardware(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_DeviceEnumerationComplete(void);
- void UpdateStatus(uint8_t CurrentStatus);
void ProcessMouseReport(uint8_t* MouseReport);
#endif
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile index a6aeb6dc7..30e40ad45 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/makefile +++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile @@ -119,14 +119,13 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
HIDReport.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -139,7 +138,7 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c index f2f666bd1..8f05e48f4 100644 --- a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c +++ b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c @@ -109,10 +109,10 @@ uint8_t SImage_RecieveBlockHeader(void) while (!(Pipe_IsReadWriteAllowed()))
{
/* Check to see if a new frame has been issued (1ms elapsed) */
- if (FrameElapsed)
+ if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
/* Clear the flag and decrement the timeout period counter */
- FrameElapsed = false;
+ USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
/* Check to see if the timeout period for the command has elapsed */
diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.c b/Demos/Host/LowLevel/StillImageHost/StillImageHost.c index 197e832f6..318e25731 100644 --- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.c +++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.c @@ -36,19 +36,28 @@ #include "StillImageHost.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_SImage_Host , .TaskStatus = TASK_STOP },
-};
-
-
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
*/
int main(void)
{
+ SetupHardware();
+
+ puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
+ "Still Image Host Demo running.\r\n" ESC_INVERSE_OFF));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+ for (;;)
+ {
+ StillImage_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
@@ -60,22 +69,7 @@ int main(void) /* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Start-up message */
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
- "Still Image Host Demo running.\r\n" ESC_INVERSE_OFF));
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
@@ -84,10 +78,7 @@ int main(void) void EVENT_USB_DeviceAttached(void)
{
puts_P(PSTR("Device Attached.\r\n"));
- UpdateStatus(Status_USBEnumerating);
-
- /* Start USB management task to enumerate the device */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
@@ -95,12 +86,8 @@ void EVENT_USB_DeviceAttached(void) */
void EVENT_USB_DeviceUnattached(void)
{
- /* Stop USB management and Still Image tasks */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
- Scheduler_SetTaskMode(USB_SImage_Host, TASK_STOP);
-
puts_P(PSTR("\r\nDevice Unattached.\r\n"));
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
@@ -108,11 +95,7 @@ void EVENT_USB_DeviceUnattached(void) */
void EVENT_USB_DeviceEnumerationComplete(void)
{
- /* Once device is fully enumerated, start the Still Image Host task */
- Scheduler_SetTaskMode(USB_SImage_Host, TASK_RUN);
-
- /* Indicate device enumeration complete */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
@@ -123,7 +106,7 @@ void EVENT_USB_HostError(const uint8_t ErrorCode) puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
- UpdateStatus(Status_HardwareError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
@@ -137,13 +120,13 @@ void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t Su printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to print device information
* through the serial port.
*/
-TASK(USB_SImage_Host)
+void StillImage_Task(void)
{
uint8_t ErrorCode;
@@ -169,7 +152,7 @@ TASK(USB_SImage_Host) puts_P(PSTR("Control error.\r\n"));
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -192,7 +175,7 @@ TASK(USB_SImage_Host) printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_EnumerationError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -205,8 +188,8 @@ TASK(USB_SImage_Host) break;
case HOST_STATE_Ready:
/* Indicate device busy via the status LEDs */
- UpdateStatus(Status_Busy);
-
+ LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
puts_P(PSTR("Retrieving Device Info...\r\n"));
PIMA_SendBlock = (PIMA_Container_t)
@@ -345,7 +328,7 @@ TASK(USB_SImage_Host) puts_P(PSTR("Done.\r\n"));
/* Indicate device no longer busy */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
/* Wait until USB device disconnected */
while (USB_IsConnected);
@@ -379,41 +362,6 @@ void UnicodeToASCII(uint8_t* UnicodeString, char* Buffer) *Buffer = 0;
}
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the StillImageHost_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2);
- break;
- case Status_EnumerationError:
- case Status_HardwareError:
- case Status_PIMACommandError:
- LEDMask = (LEDS_LED1 | LEDS_LED3);
- break;
- case Status_Busy:
- LEDMask = (LEDS_LED1 | LEDS_LED3 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
-}
-
/** Displays a PIMA command error via the device's serial port.
*
* \param ErrorCode Error code of the function which failed to complete successfully
@@ -427,7 +375,7 @@ void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError) printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
/* Indicate error via status LEDs */
- UpdateStatus(Status_PIMACommandError);
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
while (USB_IsConnected);
diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.h b/Demos/Host/LowLevel/StillImageHost/StillImageHost.h index b563767cc..1896b8fe5 100644 --- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.h +++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.h @@ -47,29 +47,31 @@ #include "Lib/PIMACodes.h"
#include "Lib/StillImageCommands.h"
- #include <LUFA/Drivers/Misc/TerminalCodes.h> // ANSI Terminal Escape Codes
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Peripheral/SerialStream.h> // Serial stream driver
- #include <LUFA/Drivers/Board/LEDs.h> // LED driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
+ #include <LUFA/Drivers/Misc/TerminalCodes.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
+
+ /* Macros: */
+ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum StillImageHost_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
- Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
- Status_Busy = 5, /**< Busy reading or writing to the attached Still Image device */
- Status_PIMACommandError = 6, /**< Error while sending or receiving a PIM command to the attached device */
- };
+ /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
- /* Task Definitions: */
- TASK(USB_SImage_Host);
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+ #define LEDMASK_USB_BUSY (LEDS_LED2)
+
/* Function Prototypes: */
+ void StillImage_Task(void);
+ void SetupHardware(void);
+
void EVENT_USB_HostError(const uint8_t ErrorCode);
void EVENT_USB_DeviceAttached(void);
void EVENT_USB_DeviceUnattached(void);
@@ -78,6 +80,5 @@ void UnicodeToASCII(uint8_t* restrict UnicodeString, char* restrict Buffer);
void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError);
- void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile index 8c1ca0b45..a4428c565 100644 --- a/Demos/Host/LowLevel/StillImageHost/makefile +++ b/Demos/Host/LowLevel/StillImageHost/makefile @@ -118,14 +118,13 @@ OBJDIR = . # Path to the LUFA library
-LUFA_PATH = ../../..
+LUFA_PATH = ../../../..
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
Lib/StillImageCommands.c \
- $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
@@ -138,7 +137,6 @@ SRC = $(TARGET).c \ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c \
# List C++ source files here. (C dependencies are automatically generated.)
|