aboutsummaryrefslogtreecommitdiffstats
path: root/Demos/Device/ClassDriver
diff options
context:
space:
mode:
Diffstat (limited to 'Demos/Device/ClassDriver')
-rw-r--r--Demos/Device/ClassDriver/AudioInput/AudioInput.txt8
-rw-r--r--Demos/Device/ClassDriver/AudioInput/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/AudioInput/makefile2
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt8
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/makefile2
-rw-r--r--Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt8
-rw-r--r--Demos/Device/ClassDriver/DualVirtualSerial/makefile2
-rw-r--r--Demos/Device/ClassDriver/GenericHID/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/GenericHID/GenericHID.txt10
-rw-r--r--Demos/Device/ClassDriver/GenericHID/makefile2
-rw-r--r--Demos/Device/ClassDriver/Joystick/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/Joystick/Joystick.txt10
-rw-r--r--Demos/Device/ClassDriver/Joystick/makefile2
-rw-r--r--Demos/Device/ClassDriver/Keyboard/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/Keyboard/Keyboard.txt10
-rw-r--r--Demos/Device/ClassDriver/Keyboard/makefile2
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt10
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouse/makefile2
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt10
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile2
-rw-r--r--Demos/Device/ClassDriver/MIDI/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/MIDI/MIDI.txt10
-rw-r--r--Demos/Device/ClassDriver/MIDI/makefile2
-rw-r--r--Demos/Device/ClassDriver/MassStorage/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/MassStorage/MassStorage.txt10
-rw-r--r--Demos/Device/ClassDriver/MassStorage/makefile2
-rw-r--r--Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt10
-rw-r--r--Demos/Device/ClassDriver/MassStorageKeyboard/makefile2
-rw-r--r--Demos/Device/ClassDriver/Mouse/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/Mouse/Mouse.txt10
-rw-r--r--Demos/Device/ClassDriver/Mouse/makefile2
-rw-r--r--Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt6
-rw-r--r--Demos/Device/ClassDriver/RNDISEthernet/makefile2
-rw-r--r--Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt10
-rw-r--r--Demos/Device/ClassDriver/VirtualSerial/makefile2
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt8
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile2
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf36
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt10
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMouse/makefile2
48 files changed, 330 insertions, 426 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
index 654536c80..dfa9362c2 100644
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
@@ -10,9 +10,9 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf
index dd5fe211c..d217aa443 100644
--- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf
+++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Input Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index a63765eb0..5724da5e6 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
index 77e986617..76445e0e2 100644
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
@@ -10,9 +10,9 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf
index c50327d39..4cd9e9c5b 100644
--- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf
+++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Output Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index 1ce907ca2..88074f605 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf
index cd37f7df4..0f78680c3 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Dual Virtual Serial Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
index 822fabca9..70e95ad51 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
@@ -10,9 +10,9 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
@@ -41,7 +41,7 @@
* USBIF CDC Class Standard</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index 5290c4fb1..064bf1289 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf
index e12fde772..7b71c2054 100644
--- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf
+++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Generic HID Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
index 998471a2c..3d72345f3 100644
--- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
+++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index e4d802150..5ef95e060 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf
index 1ebeaf260..407d08a86 100644
--- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf
+++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Joystick Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt
index 6fee43b3e..55be2c300 100644
--- a/Demos/Device/ClassDriver/Joystick/Joystick.txt
+++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 955b5bd4f..c970747a0 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf
index 3557860c3..0b47b1a32 100644
--- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf
+++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Keyboard Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
index b124efb0f..3e7ff88ed 100644
--- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
+++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index 03913b7be..8b07bb520 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf
index 284d454a5..a7357cb18 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf
+++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
index a926ab15b..b994422a8 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
+++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index ee4e43830..7d4fc9537 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf
index 24028aea7..c3696bbd9 100644
--- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf
+++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse (Multiple HID R
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
index bf0528ecc..e99a7dc74 100644
--- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
+++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
index 93ce28617..2909880e4 100644
--- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf
index 96f71c7d1..f95325f80 100644
--- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf
+++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - MIDI Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt
index 026f91bbf..362250c41 100644
--- a/Demos/Device/ClassDriver/MIDI/MIDI.txt
+++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -39,7 +39,7 @@
* General MIDI Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 9190344f7..e5b0e624a 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf
index e74be64ac..4ef067503 100644
--- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf
+++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mass Storage Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
index c2761a38d..5bf7c5570 100644
--- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
+++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -40,7 +40,7 @@
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index be74104a0..0ee461967 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -698,7 +698,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf
index f8b707dff..4f8b9e59d 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Mass Storage and Keyboard Devi
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
index 01bf5772c..7cdb47279 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -44,7 +44,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 5e8dbf49d..a504d0c63 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -693,7 +693,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf
index 7fccc0948..1dd2ccd02 100644
--- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf
+++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mouse Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt
index 65a184f2a..d1277a2d6 100644
--- a/Demos/Device/ClassDriver/Mouse/Mouse.txt
+++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -38,7 +38,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index f54c896c2..7c7493d1a 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf
index d43e5b0ac..da74f6b48 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf
+++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
index a458370da..ac72d4ae7 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
+++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
@@ -10,8 +10,8 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
*
* \section Sec_Info USB Information:
*
@@ -35,7 +35,7 @@
* <td>Microsoft RNDIS Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 4cc22a597..c53705609 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -701,7 +701,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf
index 2e09c1a8a..ebe72a5d9 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf
+++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial Device Demo"
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
index f26c4b872..e0a3291b4 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
+++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -37,7 +37,7 @@
* <td>USBIF CDC Class Standard</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 5539d8ab2..e00235113 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf
index 20d4914b4..c38f51df6 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial/Mass Storage Device Demo
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
index 088f20ac4..042244119 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
@@ -10,9 +10,9 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
@@ -42,7 +42,7 @@
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
index a3bca4673..57b78a87e 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
@@ -693,7 +693,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf
index acf6f4733..fea97b2d9 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Virtual Serial and Mouse Devic
# This could be handy for archiving the generated documentation or
# if some version control system is used.
-PROJECT_NUMBER = 0.0.0
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = NO
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES
HTML_DYNAMIC_SECTIONS = YES
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 1
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES = NO
-
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = NO
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
index 53152043f..fe6328b73 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
@@ -10,10 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
@@ -41,7 +41,7 @@
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 5cd99d5ff..592c91513 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -691,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.