/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief LUFA Library Configuration Header File
*
* This header file is used to configure LUFA's compile time options,
* as an alternative to the compile time constants supplied through
* a makefile.
*
* For information on what each token does, refer to the LUFA
* manual section "Summary of Compile Tokens".
*/
#ifndef _LUFA_CONFIG_H_
#define _LUFA_CONFIG_H_
#if (ARCH == ARCH_AVR8)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
// #define ORDERED_EP_CONFIG
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
#define USB_DEVICE_ONLY
// #define USB_HOST_ONLY
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
#define DEVICE_STATE_AS_GPIOR 0
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
// #define INTERRUPT_CONTROL_ENDPOINT
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
/* USB Host Mode Driver Related Tokens: */
// #define HOST_STATE_AS_GPIOR {Insert Value Here}
// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#else
#error Unsupported architecture for this LUFA configuration file.
#endif
#endif
id='n9' href='#n9'>9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "kmac.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
led_init_ports();
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_init_ports(void) {
DDRB |= (1<<0); // OUT
|