/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage USB LED Notifier Project
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li AT90USB646
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
*
*
*
USB Mode:
*
Device
*
*
*
USB Class:
*
Communications Device Class (CDC)
*
*
*
USB Subclass:
*
Abstract Control Model (ACM)
*
*
*
Relevant Standards:
*
USBIF CDC Class Standard
*
*
*
Supported USB Speeds:
*
Full Speed Mode
*
*
*
* \section Sec_Description Project Description:
*
* USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any
* USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the
* host on a CDC virtual serial port. When new commands are received, it updates the board LEDs.
*
* This can be controlled with any host application that can write to the virtual serial port, allowing it to become
* a visual notification system for any number of custom host applications, such as a new unread email notifier.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
*
*