From 3a0f11eb277ab719b312547981a0b0db958fbc87 Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 19 Mar 2020 12:33:17 +1100 Subject: Set MCU for some F103 boards (#8459) --- keyboards/ergodox_stm32/rules.mk | 25 +++-------- keyboards/handwired/bluepill/bluepill70/rules.mk | 54 +++--------------------- keyboards/jm60/rules.mk | 45 +++----------------- 3 files changed, 19 insertions(+), 105 deletions(-) (limited to 'keyboards') diff --git a/keyboards/ergodox_stm32/rules.mk b/keyboards/ergodox_stm32/rules.mk index ab7b853f5..cd1f2d97c 100644 --- a/keyboards/ergodox_stm32/rules.mk +++ b/keyboards/ergodox_stm32/rules.mk @@ -1,24 +1,11 @@ -SRC += matrix.c -QUANTUM_LIB_SRC += i2c_master.c - -CFLAGS += "-Wno-error=deprecated" - -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx +# MCU name +MCU = STM32F103 MCU_LDSCRIPT = stm32f103_bootloader - -MCU_STARTUP = stm32f1xx - BOARD = ERGODOX_STM32_BOARD -MCU = cortex-m3 - -ARMV = 7 - -OPT_DEFS = - -EXTRAFLAGS=-O0 -g +CFLAGS += "-Wno-error=deprecated" +EXTRAFLAGS = -O0 -g BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no # Mouse keys @@ -31,6 +18,8 @@ CUSTOM_MATRIX = yes # Custom matrix file NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work UNICODE_ENABLE = yes # Unicode - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +SRC += matrix.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/handwired/bluepill/bluepill70/rules.mk b/keyboards/handwired/bluepill/bluepill70/rules.mk index 5cf5f3f6c..4a757bcc9 100644 --- a/keyboards/handwired/bluepill/bluepill70/rules.mk +++ b/keyboards/handwired/bluepill/bluepill70/rules.mk @@ -1,51 +1,9 @@ -# project specific files -SRC = matrix.c \ - led.c - -# GENERIC STM32F103C8T6 board - stm32duino bootloader -#OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 -#MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -#BOARD = GENERIC_STM32_F103 - -# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) // Modified by Xydane -OPT_DEFS = -MCU_LDSCRIPT = STM32F103x8 -BOARD = GENERIC_STM32_F103 - -# MAPLE MINI -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000 -# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader -# BOARD = MAPLEMINI_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - +# MCU name +MCU = STM32F103 # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +# project specific files +SRC = matrix.c \ + led.c diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk index ed6431b65..a513461fc 100644 --- a/keyboards/jm60/rules.mk +++ b/keyboards/jm60/rules.mk @@ -1,41 +1,9 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx +# MCU name +MCU = STM32F103 -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC MCU_LDSCRIPT = jm60_bootloader - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards BOARD = JM60_BOARD -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 -OPT_DEFS = - # Build Options # comment out to disable the options. # @@ -51,10 +19,9 @@ CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = no VISUALIZER_ENABLE = no -#LED_DRIVER = is31fl3731c -#LED_WIDTH = 16 -#LED_HEIGHT = 5 - - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +# project specific files +SRC = matrix.c \ + led.c -- cgit v1.2.3