aboutsummaryrefslogtreecommitdiffstats
path: root/tmk_core
Commit message (Collapse)AuthorAgeFilesLines
* CLI: Tune doctor's udev rule checking to match #8750Erovia2020-05-151-1/+1
|
* V-USB Interface reorder (#9090)yiancar2020-05-142-73/+79
|
* One shot support for swap hands (#8590)Zsolt Parragi2020-05-144-1/+90
| | | | | | | | | | | | | | | | This commits add the SH_OS keycode, which works similarly to one shot layers: * while pressed, the keyboard is swapped * if no keys were pressed while it was pressed, the next key press is swapped SH_OS also supports chaining with one shot layers: OSL(x) + SH_OS + key interprets the key press on the oneshot layer. The ONESHOT_TIMEOUT setting used by one shot keys and layers is also used by oneshot swap hands. In the above chaining scenario the timeout of the oneshot layer is reset when swap hands is activated. Resolves #2682
* Optimization for scanning less layers. (#8311)Alex Ong2020-05-112-3/+14
| | | | | * Optimization for scanning less layers. * Rename NUM_LAYERS to MAX_LAYER.
* Improve security of avrdude by eliminating the use of well-known names. (#9026)Zach White2020-05-101-5/+8
| | | | | | | | | * Improve security by eliminating the use of well-known names. * Add an additional $ so the shell expands $TMP1 and $TMP2 Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
* Revert "Use nano specs (#8270)" (#9044)Joel Challis2020-05-081-1/+0
| | | This reverts commit c775104b9f60d738fd69166da33972d60034c639.
* Remove Bluefruit protocol (#9008)Ryan2020-05-044-290/+0
| | | | | * Remove Bluefruit protocol * Remove dir from doxygen TODO pile
* Revert "Fix conflicting types for 'tfp_printf' (#8269)"skullY2020-05-047-10/+357
| | | | This reverts commit e17b55e33ad5b3dcefcf7b828ac99aeb2daeeae2.
* format code according to conventions [skip ci]QMK Bot2020-05-041-3/+1
|
* Fix conflicting types for 'tfp_printf' (#8269)Joel Challis2020-05-037-356/+11
| | | | | | | | | | | | | * Refactor to use mpaland/printf * trim firmware size * remove keymap changes * run clang format * Fixup after rebase * fix up git-submodule command for printf
* Initial vusb console support (#8559)Joel Challis2020-05-039-48/+256
|
* Add some usages needed for ChromeOS hosts (#8996)Joshua Moses Diamond2020-05-031-0/+2
|
* Provide a mechanism for split keyboards to process key press on both halves ↵Joel Challis2020-05-031-1/+8
| | | | (#9001)
* Allow some usbconfig.h overrides at the keyboard level (#8647)Joel Challis2020-04-291-0/+16
|
* Clean up ATSAM ifdefs (#8808)Ryan2020-04-2010-202/+418
|
* [Docs] Fixed minor typos (#8860)Chris Ko2020-04-191-1/+1
|
* Remove Atmel FLIP from install scripts and documentation (#8822)Ryan2020-04-172-15/+1
|
* Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. ↵Nick Brassel2020-04-131-5/+5
| | | | (#8775)
* Add support for hardware and board initialisation overrides. (#8330)Nick Brassel2020-04-133-5/+54
| | | | | | | | | | | | | | | | | | | | | | | | | * Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <git@zvecr.com> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <git@zvecr.com>
* Add *OPT aliases for *ALT keycodes and macros (#8714)Konstantin Đorđević2020-04-121-0/+2
|
* Fix bug with layer caching in get_event_keycode (#8693)Drashna Jaelre2020-04-123-6/+6
| | | | | * Fix bug with layer caching in get_event_keycode * Improve naming
* format code according to conventions [skip ci]QMK Bot2020-04-111-4/+1
|
* Various fixes to how timer differences are calculated (#8585)Purdea Andrei2020-04-111-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * tmk_core/common: Fixing TIMER_DIFF macro to calculate difference correctly after the timer wraps. Let's go through an example, using the following macro: If the first timer read is 0xe4 and the second one is 0x32, the timer wrapped. If the timer would have had more bits, it's new value would have been 0x132, and the correct difference in time is 0x132 - 0xe4 = 0x4e old code TIMER_DIFF_8(0x32, 0xe4) = 0xff - 0xe4 + 0x32 = 0x4d, which is wrong. new code TIMER_DIFF_8(0x32, 0xe4) = 0xff + 1 - 0xe4 + 0x32 = 0x4e, which is correct. This also gives a chance for a smart compiler to optimize the code using normal integer overflow. For example on AVR, the following C code: uint8_t __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } With the original code, it gets translated to the following list of instructions: 00004c6e <test>: 4c6e: 98 2f mov r25, r24 4c70: 86 1b sub r24, r22 4c72: 96 17 cp r25, r22 4c74: 08 f4 brcc .+2 ; 0x4c78 <test+0xa> 4c76: 81 50 subi r24, 0x01 ; 1 4c78: 08 95 ret But with this commit, it gets translated to a single instruction: 00004c40 <test>: 4c40: 86 1b sub r24, r22 4c42: 08 95 ret This unfortunately doesn't always work so nicely, for example the following C code: int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } (Note: return type changed to int) With the original code it gets translated to: 00004c6e <test>: 4c6e: 28 2f mov r18, r24 4c70: 30 e0 ldi r19, 0x00 ; 0 4c72: 46 2f mov r20, r22 4c74: 50 e0 ldi r21, 0x00 ; 0 4c76: 86 17 cp r24, r22 4c78: 20 f0 brcs .+8 ; 0x4c82 <test+0x14> 4c7a: c9 01 movw r24, r18 4c7c: 84 1b sub r24, r20 4c7e: 95 0b sbc r25, r21 4c80: 08 95 ret 4c82: c9 01 movw r24, r18 4c84: 84 1b sub r24, r20 4c86: 95 0b sbc r25, r21 4c88: 81 50 subi r24, 0x01 ; 1 4c8a: 9f 4f sbci r25, 0xFF ; 255 4c8c: 08 95 ret Wth this commit it gets translated to: 00004c40 <test>: 4c40: 28 2f mov r18, r24 4c42: 30 e0 ldi r19, 0x00 ; 0 4c44: 46 2f mov r20, r22 4c46: 50 e0 ldi r21, 0x00 ; 0 4c48: 86 17 cp r24, r22 4c4a: 20 f0 brcs .+8 ; 0x4c54 <test+0x14> 4c4c: c9 01 movw r24, r18 4c4e: 84 1b sub r24, r20 4c50: 95 0b sbc r25, r21 4c52: 08 95 ret 4c54: c9 01 movw r24, r18 4c56: 84 1b sub r24, r20 4c58: 95 0b sbc r25, r21 4c5a: 93 95 inc r25 4c5c: 08 95 ret There is not much performance improvement in this case, however at least with this commit it functions correctly. Note: The following commit will improve compiler output for the latter example. * tmk_core/common: Improve code generation for TIMER_DIFF* macros Because of integer promotion the compiler is having a hard time generating efficient code to calculate TIMER_DIFF* macros in some situations. In the below example, the return value is "int", and this is causing the trouble. Example C code: int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } BEFORE: (with -Os) 00004c40 <test>: 4c40: 28 2f mov r18, r24 4c42: 30 e0 ldi r19, 0x00 ; 0 4c44: 46 2f mov r20, r22 4c46: 50 e0 ldi r21, 0x00 ; 0 4c48: 86 17 cp r24, r22 4c4a: 20 f0 brcs .+8 ; 0x4c54 <test+0x14> 4c4c: c9 01 movw r24, r18 4c4e: 84 1b sub r24, r20 4c50: 95 0b sbc r25, r21 4c52: 08 95 ret 4c54: c9 01 movw r24, r18 4c56: 84 1b sub r24, r20 4c58: 95 0b sbc r25, r21 4c5a: 93 95 inc r25 4c5c: 08 95 ret AFTER: (with -Os) 00004c40 <test>: 4c40: 86 1b sub r24, r22 4c42: 90 e0 ldi r25, 0x00 ; 0 4c44: 08 95 ret Note: the example is showing -Os but improvements can be seen at all optimization levels, including -O0. We never use -O0, but I tested it to make sure that no extra code is generated in that case.OA * quantum/debounce: Fix custom wrapping timers in eager_pr and eager_pk debounce algorithms Please see the below simulated sequence of events: Column A is the 16-bit value returned by read_timer(); Column B is the value returned by custom_wrap_timer_read(); Column C is the original code: (timer_read() % MAX_DEBOUNCE) A, B, C 65530, 19, 30 65531, 20, 31 65532, 21, 32 65533, 22, 33 65534, 23, 34 65535, 24, 35 0 25, 0 1, 26, 1 2, 27, 2 3, 28, 3 4, 29, 4 5, 30, 5 read_timer() wraps about every 1.09 seconds, and so debouncing might fail at these times without this commit. * quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. * quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. (2)
* Add PS2_MOUSE_ROTATE to compensate for device orientation (#8650)Manna Harbour2020-04-091-0/+15
| | | | | | | | * Add PS2_MOUSE_ROTATE to compensate for device orientation * fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation * Reformat with IndentPPDirectives: AfterHash as per #6316
* Fix compile issues related to NO_ACTION_MACRO/FUNCTION and LTO_ENABLE (#8663)Konstantin Đorđević2020-04-092-2/+10
| | | | | | | | | | | | | | | | * Define NO_ACTION_MACRO/FUNCTION in header instead of makefile when LTO is enabled Currently, boards and keymaps that define NO_ACTION_MACRO/FUNCTION unconditionally will not compile with LTO_ENABLE (#8604). This fixes the issue by moving the definitions from common.mk to action.h, which enables us to check for previous definitions of those macros (this cannot be done in a makefile). * Remove LTO checks in templates Since now NO_ACTION_MACRO/FUNCTION are defined as needed in action.h (which is included by quantum.h), checking for LTO in keyboard and user code is no longer required. * Update LTO_ENABLE docs
* spi_master for AVR (#8299)Ryan2020-04-082-124/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Change _delay_ms/us() to wait_ms/us() * Switch to platform-agnostic GPIO macros * Add AVR spi_master and migrate Adafruit BLE code * Set verbose back to false * Add clock divisor, bit order and SPI mode configuration for init * Add start and stop functions * Move configuration of mode, endianness and speed to `spi_start()` * Some breaks here would be good * Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4) * Remove mode and divisor enums * Add some docs * No hr at EOF * Add links in sidebar
* format code according to conventions [skip ci]QMK Bot2020-04-051-4/+4
|
* V-USB: Remove some stuff from usbconfig.h that should not be configurable ↵Ryan2020-04-053-53/+11
| | | | | | | | | | | (#8656) * V-USB: Remove some stuff from usbconfig.h that should not be configurable * Clean up some ifdefs * And some more * Even more
* V-USB remote wakeup (#7627)Drashna Jaelre2020-04-052-5/+21
| | | | | | | | | * V-USB remote wakeup Backport from tmk/tmk_keyboard@391c979be751eaf113c8f53c36644a6bb6ff12f6 * Change vusb.c remote wake config as per fauxpark's suggestion
* format code according to conventions [skip ci]QMK Bot2020-04-021-4/+4
|
* Initial support for ATtiny85 (#8632)Joel Challis2020-04-022-7/+14
| | | | | * Initial support for ATtiny85 * Update mcu selection
* Fix `pgm_read_ptr()` define for ARM (#8658)Ryan2020-04-021-1/+1
|
* Strip out features to allow minimum firmware sizes (#8645)Joel Challis2020-04-014-11/+14
|
* Updated V-USB template to allow usbFunctionWriteOut (#8634)yiancar2020-04-012-3/+1
|
* Miscellaneous cleanups (#8639)Ryan2020-04-011-6/+0
| | | | | * Miscellaneous cleanups * Cast NO_PIN
* Migrate :program logic to :flash (#8631)Joel Challis2020-04-012-6/+6
|
* V-USB: Consolidate usbconfig.h's into a single file (#8584)Ryan2020-03-311-0/+352
|
* add hid_raw feature to VUSB (#8380)Takuya Urakawa2020-03-303-1/+174
| | | | | | | | | | | | | | | | | | | * rewrite usbhid feature on vusb * Apply suggestions from code review Co-Authored-By: Ryan <fauxpark@gmail.com> * fix typo * fix typo again * Update tmk_core/protocol/vusb/vusb.c Co-Authored-By: Ryan <fauxpark@gmail.com> * clean up defines Co-authored-by: Ryan <fauxpark@gmail.com>
* fixed problem with implicit declaration in quantum/rgblight.c (#8406)Casper Weiss Bang2020-03-281-3/+8
| | | | | | | | | | | | | * Update tmk_core/common/progmem.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/rgblight.c Co-Authored-By: Ryan <fauxpark@gmail.com> * fixed problem with implicit declaration in quantum/rgblight.c (#8381) Co-authored-by: Ryan <fauxpark@gmail.com>
* V-USB: Use structs for USB descriptors (#8572)Ryan2020-03-282-104/+218
| | | | | | | * V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass
* Enable SLEEP_LED on ATmega32A (#8531)Joel Challis2020-03-262-9/+44
| | | | | | | | | * Port over some AVR backlight logic to SLEEP_LED * Port over some AVR backlight logic to SLEEP_LED - add timer 3 * Port over some AVR backlight logic to SLEEP_LED - clang format * Enable SLEEP_LED within vusb protocol
* V-USB: Use manufacturer and product strings from config.h (#7797)Ryan2020-03-262-0/+70
| | | | | * V-USB: Use manufacturer and product strings from config.h * Update board configs
* format code according to conventions [skip ci]QMK Bot2020-03-262-7/+3
|
* Add RawHID support to ATSAM (Massdrop boards) (#8530)foxx13372020-03-266-1/+47
| | | | | | | | | * Add support for RAW endpoint for arm_atsam This the excellent work from helluvamatt/qmk_firmware in bb6eeb93b. * Reformat arm_atsam RAW endpoint code Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>
* Run clang-format manually to fix recently changed files (#8552)Joel Challis2020-03-251-14/+14
|
* Add Post Processing to process_record (#4892)Drashna Jaelre2020-03-232-1/+9
| | | | | | | | | | | | | | | | | | | * Improve process_record system Code based on @colinta's * Rename and better handle functions * Fix incorrect function call to process_record_user * Add documentation for post_process_record * Add both get_event_keycode and get_record_keycode functions And add some comments about these functions * Update code format * Cleanup merge artifacts
* Align some ChibiOS build logic (#8461)Joel Challis2020-03-222-5/+29
| | | | | | | * Align some ChibiOS build logic * infer more makefile logic * Move bootloader logic to chibios file
* format code according to conventions [skip ci]QMK Bot2020-03-211-1/+1
|
* Add support for Bootmagic lite when using SPLIT_HAND_PIN (#8347)Joel Challis2020-03-212-0/+53
| | | | | | | | | * Add support for Bootmagic lite when using SPLIT_HAND_PIN * Deduplicate bootmagic_lite logic from within via * Revert location of defaults so that user overrides still work for now * Tidy up code slightly
* Fix formatting for report.h (#8512)Ryan2020-03-221-4/+16
|
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 16:42:20 +0000