diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 14 |
1 files changed, 7 insertions, 7 deletions
@@ -33,7 +33,7 @@ You can find some keyboard specific projects under `converter` and `keyboard` di ### converter * [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2] * [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb] -* [m0110_usb](converter/m0110_usb) - [Machintosh 128K/512K/Plus keyboard to USB][GH_m0110] +* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110] * [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal] * [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news] * [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k] @@ -91,7 +91,7 @@ See [doc/keymap.md](doc/keymap.md). -Magic Comannds +Magic Commands -------------- To see help press `Magic` + `H`. @@ -122,7 +122,7 @@ Following commands can be also executed with `Magic` + key. In console mode `Mag **TBD** ### Boot Magic Configuration - Virtual DIP Switch -Boot Magic are executed during boot up time. Press Magic key below then pulgin keyboard cable. +Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable. Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles. To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h). @@ -142,7 +142,7 @@ To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be #### Keymap - Swap Control and CapsLock(`Left Control`) -- Change CapsLock to Control(`Casp Lock`) +- Change CapsLock to Control(`Caps Lock`) - Swap LeftAlt and Gui(`Left Alt`) - Swap RightAlt and Gui(`Right Alt`) - Disable Gui(`Left Gui`) @@ -211,7 +211,7 @@ Architecture -Debuging +Debugging -------- Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack. @@ -228,7 +228,7 @@ Files and Directories * converter/ - protocol converter projects * doc/ - documents * common.mk - Makefile for common -* protoco.mk - Makefile for protocol +* protocol.mk - Makefile for protocol * rules.mk - Makefile for build rules ### Common @@ -264,7 +264,7 @@ Files and Directories -Conding Style +Coding Style ------------- - Doesn't use Tab to indent, use 4-spaces instead. |