diff options
35 files changed, 3838 insertions, 0 deletions
diff --git a/keyboards/sol/common/glcdfont.c b/keyboards/sol/common/glcdfont.c new file mode 100644 index 000000000..89665ba07 --- /dev/null +++ b/keyboards/sol/common/glcdfont.c @@ -0,0 +1,244 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x03, 0x07, 0x1F, 0x7F, 0xFF, 0xFF, + 0xFE, 0xF8, 0xF0, 0xC0, 0x20, 0xF8, + 0xFE, 0xFF, 0xFE, 0x79, 0x27, 0x1F, + 0x7F, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, + 0xC0, 0x20, 0xF8, 0xFE, 0xFF, 0xFF, + 0x7F, 0x3F, 0x3F, 0x7F, 0xFF, 0xFE, + 0xF8, 0xF0, 0xC0, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xFF, 0x7F, 0x7F, 0x7F, + 0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xE0, + 0xE0, 0xE0, 0xE0, 0xF0, 0xF0, 0xF0, + 0xF8, 0x78, 0x78, 0x7C, 0x3C, 0x3C, + 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, + 0xBF, 0xBF, 0xDF, 0xDF, 0xEF, 0xEF, + 0x00, 0x03, 0x07, 0x1F, 0x7F, 0xFF, + 0xFF, 0xFF, 0xFE, 0xF8, 0xE0, 0xC0, + 0xE0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, + 0x7F, 0x1F, 0x07, 0x03, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xC1, 0xF3, + 0xCF, 0xBF, 0x7F, 0xFF, 0xFF, 0xFC, + 0xFB, 0xE7, 0x81, 0x00, 0x00, 0x00, + 0x00, 0x80, 0xE3, 0xCF, 0x3F, 0xFF, + 0xFF, 0xFF, 0xFC, 0xFB, 0xE7, 0x81, + 0x00, 0x00, 0x00, 0x00, 0x81, 0xE7, + 0xFF, 0xFF, 0xFF, 0xFF, 0x3C, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xF8, 0xF8, 0xFC, 0x7C, 0x7E, + 0x7E, 0x3E, 0xFE, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xF7, 0xF7, 0xF7, 0xFB, + 0xFB, 0x7D, 0x7D, 0x7D, 0xBE, 0xBE, + 0xBE, 0xDF, 0xDF, 0xE0, 0xE0, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0xFC, 0xFC, 0x7C, 0x7E, 0x7E, + 0x3E, 0x3E, 0x1F, 0x1F, 0x1F, 0x0F, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, + 0xE7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xE7, 0x81, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x60, 0x70, 0x7C, 0x7F, 0x7F, 0x7F, + 0x7F, 0x1F, 0x06, 0x01, 0x03, 0x0F, + 0x3F, 0x7F, 0x7F, 0x7E, 0x7C, 0x7C, + 0x7E, 0x7F, 0x7F, 0x7F, 0x1F, 0x06, + 0x01, 0x07, 0x0F, 0x3F, 0x7F, 0x7F, + 0x7E, 0x7C, 0x7C, 0x7E, 0x7F, 0x7F, + 0x3F, 0x0F, 0x03, 0x00, 0x00, 0x00, + 0x00, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x7F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x7D, 0x7D, 0x3D, 0x3E, + 0x1E, 0x1F, 0x1F, 0x1F, 0x0F, 0x0F, + 0x07, 0x07, 0x07, 0x03, 0x03, 0x00, + 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, + 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, + 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x00, + 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, + 0x00, 0x40, 0x70, 0x78, 0x7E, 0x7F, + 0x7F, 0x7F, 0x3F, 0x0F, 0x03, 0x01, + 0x03, 0x0F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7E, 0x78, 0x70, 0x40, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +#endif // FONT5X7_H diff --git a/keyboards/sol/common/knob_v2.c b/keyboards/sol/common/knob_v2.c new file mode 100644 index 000000000..f22f7c5d8 --- /dev/null +++ b/keyboards/sol/common/knob_v2.c @@ -0,0 +1,71 @@ +#include "knob_v2.h" + +bool knob_prev_a = false; +static knob_report_t knob_report = {.dir = 0, .phase = 0}; + +void knob_init(void) { + // I use pins D1 (ISR1) & D4 for a knob. + + // Set pin mode for D4 as input. + DDRD &= ~(0UL << ENCODER_PIN_2); + + // Enable internal pull-up for D4. + // This is done by "writing" 1 to a pin that has its mode set to input. + PORTD |= (1 << ENCODER_PIN_2); + + // Enable interrupt for D1 + // For more info on the below flags see this awesome section 11.1 (pages 89-90) here: + // https://cdn-shop.adafruit.com/datasheets/atmel-7766-8-bit-avr-atmega16u4-32u4_datasheet.pdf + // Set pin mode & pull-up. + DDRD &= ~(0UL << ENCODER_PIN_1); + PORTD |= (1UL << ENCODER_PIN_1); + + // INT: 33221100 + EICRA |= 0b00010000; // 0b01 - any edge + // INT: 6 3210 + EIMSK |= 0b00000100; +} + +ISR(ENCODER_INT) { + bool a = PIND & (1 << ENCODER_PIN_1); + + if (knob_prev_a != a) { + // "A" channel has REALLY changed. + knob_report.phase = a; + knob_prev_a = a; + bool b = PIND & (1 << ENCODER_PIN_2); + if (a == b) { + // Halfway through CCW rotation (A == B) + // + // +---YOU ARE HERE (A=1, B=1) + // | +---OR HERE (A=0, B=0) + // | | + // v v + // A: _____/^^^^^\__ + // B: __/^^^^^\_____ + knob_report.dir++; + } else { + // Halfway through CW rotation (A != B) + // + // +---YOU ARE HERE (A=1, B=0) + // | +---OR HERE (A=0, B=1) + // | | + // v v + // A: _____/^^^^^\_____ + // B: ________/^^^^^\__ + knob_report.dir--; + } + } +} + +knob_report_t knob_report_read(void) { + // Return knob report. + return knob_report; +} + +void knob_report_reset(void) { + // Call this ASAP once you've processed the previous knob report. + // TODO: This should probably be called within `knob_report_read`. + knob_report.dir = 0; + knob_report.phase = 0; +} diff --git a/keyboards/sol/common/knob_v2.h b/keyboards/sol/common/knob_v2.h new file mode 100644 index 000000000..45196eb1a --- /dev/null +++ b/keyboards/sol/common/knob_v2.h @@ -0,0 +1,28 @@ +// Rotary knob implementation - Version 2. +// Uses 2 digital pins - D2 (via interrupt) & D6. +// #include "rev1.h" +#include <avr/io.h> +#include <avr/interrupt.h> +#include <stdbool.h> + +#ifndef ENCODER_PIN_1 + #define ENCODER_PIN_1 PD2 +#endif +#ifndef ENCODER_PIN_2 + #define ENCODER_PIN_2 PD6 +#endif +#ifndef ENCODER_INT + #define ENCODER_INT INT2_vect +#endif + +typedef struct knob_report_t { + int8_t dir; // Contains number of rotations that happened + int8_t phase; // Contains 0 if last rotation happened on 90 degrees, 1 if on 270 +} knob_report_t; + +void knob_init(void); +knob_report_t knob_report_read(void); +void knob_report_reset(void); + +bool knob_prev_a; +int8_t knob_dir; diff --git a/keyboards/sol/common/ssd1306.c b/keyboards/sol/common/ssd1306.c new file mode 100644 index 000000000..b3e55a67c --- /dev/null +++ b/keyboards/sol/common/ssd1306.c @@ -0,0 +1,329 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include <string.h> +#include "print.h" +#ifndef LOCAL_GLCDFONT +#include "common/glcdfont.c" +#else +#include <helixfont.h> +#endif +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ +#define ScreenOffInterval 300000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty) { + iota_gfx_flush(); + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} +#endif diff --git a/keyboards/sol/common/ssd1306.h b/keyboards/sol/common/ssd1306.h new file mode 100644 index 000000000..77ce7c211 --- /dev/null +++ b/keyboards/sol/common/ssd1306.h @@ -0,0 +1,92 @@ +#ifndef SSD1306_H +#define SSD1306_H + +#include <stdbool.h> +#include <stdio.h> +#include "pincontrol.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + + + +#endif diff --git a/keyboards/sol/config.h b/keyboards/sol/config.h new file mode 100644 index 000000000..93fd2261b --- /dev/null +++ b/keyboards/sol/config.h @@ -0,0 +1,22 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + diff --git a/keyboards/sol/i2c.c b/keyboards/sol/i2c.c new file mode 100644 index 000000000..4bee5c639 --- /dev/null +++ b/keyboards/sol/i2c.c @@ -0,0 +1,162 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} +#endif diff --git a/keyboards/sol/i2c.h b/keyboards/sol/i2c.h new file mode 100644 index 000000000..47cf6bd1b --- /dev/null +++ b/keyboards/sol/i2c.h @@ -0,0 +1,49 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/sol/keymaps/brianweyer/config.h b/keyboards/sol/keymaps/brianweyer/config.h new file mode 100755 index 000000000..87b7dd2ac --- /dev/null +++ b/keyboards/sol/keymaps/brianweyer/config.h @@ -0,0 +1,27 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define SSD1306OLED + + +// place overrides here + diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c new file mode 100755 index 000000000..2259e246d --- /dev/null +++ b/keyboards/sol/keymaps/brianweyer/keymap.c @@ -0,0 +1,291 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "common/ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _FN, + _ADJ +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + FN, + ADJ, + RGBRST +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* QWERTY + * ,------------------------------------------------. ,------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | Bspc | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Esc | A | S | D | F | G | | | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | | | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Ctrl | Alt | FN | LGui | RGB | Spc | Del | | Bspc | Spc | Adj | LGui | FN | Alt | Ctrl | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Spc | Ent | | Ent | Spc | + * `-------------' `-------------' + */ + [_QWERTY] = LAYOUT_kc( \ + //,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+ + GRV, 1, 2, 3, 4, 5, MINS, EQL, 6, 7, 8, 9, 0, BSPC, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + TAB, Q, W, E, R, T, LBRC, RBRC, Y, U, I, O, P, BSLS, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + ESC, A, S, D, F, G, _______, _______, H, J, K, L, SCLN, QUOT, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + LSPO, Z, X, C, V, B, _______, _______, N, M, COMM, DOT, SLSH, RSPC, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + LCTL, LALT, FN, LGUI, RGB_MOD, SPC, DEL, BSPC, SPC, ADJ, LGUI, FN, LALT, LCTL, + //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------| + VOLD, VOLU, SPC, ENT, ENT, SPC, DOWN, UP + // Rotary Left |--------+--------| |--------+-----------+ Rotary Right + ), + + /* FN + * ,------------------------------------------------. ,------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | | | Up | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | | Left | Down | Right| | | | | Play | Next | Mute | V-Up |V-Down| | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | + * `-------------' `-------------' + */ + [_FN] = LAYOUT_kc( \ + //,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+ + F1, F2, F3, F4, F5, F6, _______, _______, F7, F8, F9, F10, F11, F12, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, _______, _______, UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, _______, LEFT, DOWN, RGHT, _______, _______, _______, MPLY, MNXT, MUTE, VOLD, VOLU, _______, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------| + VOLD, VOLU, _______, _______, _______, _______, UP, DOWN + // Rotary Left |--------+--------| |--------+-----------+ Rotary Right + ), + + /* ADJ + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Sat+ | Val+ | Hue+ |Speed+|Toggle| | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Sat- | Val- | Hue- |Speed-|Reset | | | | |QWERTY| COLE | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | + * `-------------' `-------------' + */ + + [_ADJ] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+ + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, RGB_SAI, RGB_VAI, RGB_HUI, RGB_SPI, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, \ + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, RGB_SAD, RGB_VAD, RGB_HUD, RGB_SPD, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, \ + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--------+--+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______ \ + // Rotary Left |--------+--------| |--------+--------+ Rotary Right + ) +}; + + +// define variables for reactive RGB +bool TOG_STATUS = false; +int RGB_current_mode; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case FN: + if (record->event.pressed) { + layer_on(_FN); + } else { + layer_off(_FN); + } + return false; + break; + case ADJ: + if (record->event.pressed) { + layer_on(_ADJ); + } else { + layer_off(_ADJ); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + // led_test_init(); + iota_gfx_task(); // this is what updates the display continuously + #endif +} + + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// hook point for 'led_test' keymap +// 'default' keymap's led_test_init() is empty function, do nothing +// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); +__attribute__ ((weak)) +void led_test_init(void) {} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_FN (1<<_FN) +#define L_ADJ (1<<_ADJ) +#define L_ADJ_TRI (L_ADJ|L_FN) + +static void render_logo(struct CharacterMatrix *matrix) { + + static char logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + matrix_write(matrix, logo); +} + + + +void render_status(struct CharacterMatrix *matrix) { + + // Render to mode icon + static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if(keymap_config.swap_lalt_lgui==false){ + matrix_write(matrix, logo[0][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[0][1]); + }else{ + matrix_write(matrix, logo[1][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[1][1]); + } + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(matrix, PSTR("\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(matrix, PSTR("Laser")); + break; + case L_FN: + matrix_write_P(matrix, PSTR("Function")); + break; + case L_ADJ: + case L_ADJ_TRI: + matrix_write_P(matrix, PSTR("Adjustment")); + break; + default: + matrix_write(matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(matrix, led); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + matrix_clear(&matrix); + if(is_master){ + render_status(&matrix); + }else{ + render_logo(&matrix); + } + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/sol/keymaps/brianweyer/rules.mk b/keyboards/sol/keymaps/brianweyer/rules.mk new file mode 100755 index 000000000..d53ebe34d --- /dev/null +++ b/keyboards/sol/keymaps/brianweyer/rules.mk @@ -0,0 +1,46 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix +LED_ANIMATIONS = yes # LED animations +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port +UNICODE_ENABLE = no # Unicode +SWAP_HANDS_ENABLE = no # Enable one-hand typing +ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) +OLED_ENABLE = yes # OLED_ENABLE (+5000) +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + +# Do not edit past here + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) + OPT_DEFS += -DENCODER_ENABLE_CUSTOM + SRC += common/knob_v2.c +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) + OPT_DEFS += -DRGBLIGHT_FULL_POWER +endif + +ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) + OPT_DEFS += -DRGB_MATRIX_KEYPRESSES +endif + +ifeq ($(strip $(LED_MIRRORED)), yes) + OPT_DEFS += -DLED_MIRRORED +endif diff --git a/keyboards/sol/keymaps/danielhklein/config.h b/keyboards/sol/keymaps/danielhklein/config.h new file mode 100644 index 000000000..452cdda82 --- /dev/null +++ b/keyboards/sol/keymaps/danielhklein/config.h @@ -0,0 +1,25 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + + +// place overrides here + diff --git a/keyboards/sol/keymaps/danielhklein/keymap.c b/keyboards/sol/keymaps/danielhklein/keymap.c new file mode 100644 index 000000000..883b41826 --- /dev/null +++ b/keyboards/sol/keymaps/danielhklein/keymap.c @@ -0,0 +1,354 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "common/ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _COLEMAK, + _FN, + _ADJ +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + FN, + ADJ, + BACKLIT, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns + /* Base Layout + * ,------------------------------------------------. ,------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | | | | | | [ | | ] | | | | | | Enter| + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Caps | | | | | | { | | } | | | | | | ' | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |Shift | | | | | | ` | | \ | | | | | |Shift | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Left | Down | Ctrl | Alt | Gui | Bspc | FN | | ADJ | Space| Gui | Alt | Ctrl | Up |Right | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | Bspc | FN | | ADJ | Space| + * `-------------' `-------------' + */ +#define BASE_LAYOUT( \ + _00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \ + _10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \ + _20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \ +) \ +LAYOUT( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_ENT, \ + KC_CAPS, _10, _11, _12, _13, _14, KC_LCBR, KC_RCBR, _15, _16, _17, _18, _19, KC_QUOT, \ + KC_LSFT, _20, _21, _22, _23, _24, KC_GRV, KC_BSLS, _25, _26, _27, _28, _29, KC_RSFT, \ + KC_LEFT, KC_DOWN, KC_LCTRL, KC_LALT, KC_LGUI, KC_BSPC, FN, ADJ, KC_SPC, KC_RGUI, KC_RALT, KC_RCTRL, KC_UP, KC_RIGHT, \ + KC_VOLU, KC_VOLD, KC_BSPC, FN, ADJ, KC_SPC, KC_VOLU, KC_VOLD \ +) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | E | R | T | | | | Y | U | I | O | P | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | S | D | F | G | | | | H | J | K | L | ; | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | V | B | | | | N | M | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' + */ + [_QWERTY] = BASE_LAYOUT( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH \ + ), + + /* Colemak + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | F | P | G | | | | J | L | U | Y | ; | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | R | S | T | D | | | | H | N | E | I | O | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | V | B | | | | K | M | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `--------=----' + */ + [_COLEMAK] = BASE_LAYOUT( \ + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, \ + KC_A, KC_R, KC_S, KC_T, KC_G, KC_K, KC_N, KC_E, KC_I, KC_O, \ + KC_Z, KC_X, KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH \ + ), + + + /* FN + * ,------------------------------------------------. ,------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | | | | | | | | | | PGDN | UP | PGUP | PRINT| HOME | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | | | | | | | | | | LEFT | DOWN | RIGHT|INSERT| END | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |Shift | | | | | | | | | PLAY | MUTE | VOL- | VOL+ | LAST | NEXT | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | Gui | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' + */ + [_FN] = LAYOUT( \ + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + ), + + /* ADJ + * ,------------------------------------------------. ,------------------------------------------------. + * |RESET | F1 | F2 | F3 | F4 | F5 | F6 | | | = | / | * | - | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | 7 | 8 | 9 | + | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | HUI | VAI | SAI | | |COLEMK| | | 4 | 5 | 6 | Enter| | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | HUD | VAD | SAD | | |QWERTY| | | 1 | 2 | 3 | Space| | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | |RGBRST|RGBTOG|RGBMOD|RGBSMD| | | | | | 0 | . | Bspc | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' + */ + + [_ADJ] = LAYOUT( \ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_PEQL, KC_PSLS, KC_PAST, KC_PMNS, XXXXXXX, XXXXXXX, \ + XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_P7, KC_P8, KC_P9, KC_PPLS, XXXXXXX, XXXXXXX, \ + XXXXXXX, RGB_SAD, RGB_VAI, RGB_SAI, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PENT, XXXXXXX, XXXXXXX, \ + XXXXXXX, RGB_HUD, RGB_VAD, RGB_HUI, XXXXXXX, XXXXXXX, QWERTY, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_SPC, XXXXXXX, XXXXXXX, \ + XXXXXXX, RGBRST, RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_P0, KC_PDOT, KC_BSPC, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX \ + ) +}; + +// define variables for reactive RGB +bool TOG_STATUS = false; +int RGB_current_mode; + +// Setting ADJ layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); + #endif + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if(record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case FN: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(15); + #endif + } + layer_on(_FN); + } else { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + #endif + layer_off(_FN); + TOG_STATUS = false; + } + return false; + break; + case ADJ: + if (record->event.pressed) { + layer_on(_ADJ); + } else { + layer_off(_ADJ); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// hook point for 'led_test' keymap +// 'default' keymap's led_test_init() is empty function, do nothing +// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); +__attribute__ ((weak)) +void led_test_init(void) {} + +void matrix_scan_user(void) { + led_test_init(); + iota_gfx_task(); // this is what updates the display continuously +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_FN (1<<_FN) +#define L_ADJ (1<<_ADJ) + +static void render_logo(struct CharacterMatrix *matrix) { + + static char logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + matrix_write(matrix, logo); + //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); +} + + + +void render_status(struct CharacterMatrix *matrix) { + + // Render to mode icon + static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if(keymap_config.swap_lalt_lgui==false){ + matrix_write(matrix, logo[0][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[0][1]); + }else{ + matrix_write(matrix, logo[1][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[1][1]); + } + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(matrix, PSTR("\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(matrix, PSTR("Default")); + break; + case L_FN: + matrix_write_P(matrix, PSTR("FN")); + break; + case L_ADJ: + case L_ADJ_TRI: + matrix_write_P(matrix, PSTR("ADJ")); + break; + default: + matrix_write(matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(matrix, led); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + matrix_clear(&matrix); + if(is_master){ + render_status(&matrix); + }else{ + render_logo(&matrix); + } + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/sol/keymaps/danielhklein/rules.mk b/keyboards/sol/keymaps/danielhklein/rules.mk new file mode 100644 index 000000000..199dad6fc --- /dev/null +++ b/keyboards/sol/keymaps/danielhklein/rules.mk @@ -0,0 +1,50 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) + +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix +RGBLIGHT_ANIMATIONS = yes # LED animations +LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port +UNICODE_ENABLE = no # Unicode +SWAP_HANDS_ENABLE = no # Enable one-hand typing +ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) + +OLED_ENABLE = no # OLED_ENABLE (+5000) +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + +# Do not edit past here + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) + OPT_DEFS += -DENCODER_ENABLE_CUSTOM + SRC += common/knob_v2.c + +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE + +else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) + OPT_DEFS += -DRGBLIGHT_FULL_POWER +endif + +ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) + OPT_DEFS += -DRGB_MATRIX_KEYPRESSES +endif + +ifeq ($(strip $(LED_MIRRORED)), yes) + OPT_DEFS += -DLED_MIRRORED +endif diff --git a/keyboards/sol/keymaps/default/config.h b/keyboards/sol/keymaps/default/config.h new file mode 100644 index 000000000..452cdda82 --- /dev/null +++ b/keyboards/sol/keymaps/default/config.h @@ -0,0 +1,25 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + + +// place overrides here + diff --git a/keyboards/sol/keymaps/default/keymap.c b/keyboards/sol/keymaps/default/keymap.c new file mode 100644 index 000000000..799507f66 --- /dev/null +++ b/keyboards/sol/keymaps/default/keymap.c @@ -0,0 +1,362 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "common/ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _COLEMAK, + _FN, + _ADJ +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + FN, + ADJ, + BACKLIT, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + + + +#define FN_ESC LT(_FN, KC_ESC) +#define FN_CAPS LT(_FN, KC_CAPS) + +// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns + /* Base Layout + * ,------------------------------------------------. ,------------------------------------------------. + * | GESC | | | | | | - | | = | | | | | | BkSp | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | | | | | | [ | | ] | | | | | | \ | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * |FN(CAPS)| | | | | | ( | | ) | | | | | | ' | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |Shift | | | | | | { | | } | | | | | |Shift | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | Space| DEL | | Enter| Space| + * `-------------' `-------------' + */ +#define BASE_LAYOUT( \ + _00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \ + _10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \ + _20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \ +) \ +LAYOUT( \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_BSLS, \ + FN_CAPS, _10, _11, _12, _13, _14, KC_LPRN, KC_RPRN, _15, _16, _17, _18, _19, KC_QUOT, \ + KC_LSFT, _20, _21, _22, _23, _24, KC_LCBR, KC_RCBR, _25, _26, _27, _28, _29, KC_ENT, \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, \ + KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ +) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | E | R | T | | | | Y | U | I | O | P | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | S | D | F | G | | | | H | J | K | L | ; | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | V | B | | | | N | M | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `--------=----' + */ + [_QWERTY] = BASE_LAYOUT( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH \ + ), + + /* Colemak + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | F | P | G | | | | J | L | U | Y | ; | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | R | S | T | D | | | | H | N | E | I | O | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | V | B | | | | K | M | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `--------=----' + */ + [_COLEMAK] = BASE_LAYOUT( \ + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, \ + KC_A, KC_R, KC_S, KC_T, KC_G, KC_K, KC_N, KC_E, KC_I, KC_O, \ + KC_Z, KC_X, KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH \ + ), + + + /* FN + * ,------------------------------------------------. ,------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | PGDN | UP | PGUP | | | | | | | PGDN | UP | PGUP | PRINT| HOME | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | LEFT | DOWN | RIGHT| | | | | | | LEFT | DOWN | RIGHT|INSERT| END | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | |RGBMOD| | | | | | | PLAY | NEXT | MUTE | VOL- | VOL+ | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' + */ + [_FN] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, _______, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \ + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \ + KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \ + ), + + /* ADJ + * ,------------------------------------------------. ,------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | SAD | VAI | SAI | RESET| | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | HUD | VAD | HUI |RGBRST| | | | | |QWERTY|COLEMK| | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | |RGBTOG| HUI | SAI | VAI | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | |RGBMOD(| | | | | | | |RGBRMOD| HUD | SAD | VAD | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' + */ + + [_ADJ] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RGB_SAD, RGB_VAI, RGB_SAI, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \ + KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \ + ) +}; + + + +// define variables for reactive RGB +bool TOG_STATUS = false; +int RGB_current_mode; + +// Setting ADJ layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); + #endif + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if(record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case FN: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(15); + #endif + } + layer_on(_FN); + } else { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + #endif + layer_off(_FN); + TOG_STATUS = false; + } + return false; + break; + case ADJ: + if (record->event.pressed) { + layer_on(_ADJ); + } else { + layer_off(_ADJ); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// hook point for 'led_test' keymap +// 'default' keymap's led_test_init() is empty function, do nothing +// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); +__attribute__ ((weak)) +void led_test_init(void) {} + +void matrix_scan_user(void) { + led_test_init(); + iota_gfx_task(); // this is what updates the display continuously +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_FN (1<<_FN) +#define L_ADJ (1<<_ADJ) + +static void render_logo(struct CharacterMatrix *matrix) { + + static char logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + matrix_write(matrix, logo); + //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); +} + + + +void render_status(struct CharacterMatrix *matrix) { + + // Render to mode icon + static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if(keymap_config.swap_lalt_lgui==false){ + matrix_write(matrix, logo[0][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[0][1]); + }else{ + matrix_write(matrix, logo[1][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[1][1]); + } + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(matrix, PSTR("\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(matrix, PSTR("Default")); + break; + case L_FN: + matrix_write_P(matrix, PSTR("FN")); + break; + case L_ADJ: + case L_ADJ_TRI: + matrix_write_P(matrix, PSTR("ADJ")); + break; + default: + matrix_write(matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(matrix, led); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + matrix_clear(&matrix); + if(is_master){ + render_status(&matrix); + }else{ + render_logo(&matrix); + } + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/sol/keymaps/default/readme.md b/keyboards/sol/keymaps/default/readme.md new file mode 100644 index 000000000..f5f384555 --- /dev/null +++ b/keyboards/sol/keymaps/default/readme.md @@ -0,0 +1,133 @@ +# The Default Sol Layout +## Layout + +### Base modifier layout +``` + * ,------------------------------------------------. ,------------------------------------------------. + * | GESC | | | | | | - | | = | | | | | | BkSp | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | | | | | | [ | | ] | | | | | | \ | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * |FN(CAPS)| | | | | | ( | | ) | | | | | | ' | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |Shift | | | | | | { | | } | | | | | |Shift | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | Space| DEL | | Enter| Space| + * `-------------' `-------------' +``` + +### Qwerty alphas +``` + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | E | R | T | | | | Y | U | I | O | P | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | S | D | F | G | | | | H | J | K | L | ; | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | V | B | | | | N | M | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' +``` + +### Colemak alphas +``` + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | F | P | B | | | | J | L | U | Y | ; | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | R | S | T | G | | | | K | N | E | I | O | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | D | V | | | | M | H | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' +``` + +### Function (FN) +``` + * ,------------------------------------------------. ,------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | PGDN | UP | PGUP | | | | | | | PGDN | UP | PGUP | PRINT| HOME | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | LEFT | DOWN | RIGHT| | | | | | | LEFT | DOWN | RIGHT|INSERT| END | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | |RGBMOD| | | | | | | PLAY | NEXT | MUTE | VOL- | VOL+ | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' +``` + +### Adjust (ADJ) +``` + * ,------------------------------------------------. ,------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | SAD | VAI | SAI | RESET| | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | HUD | VAD | HUI |RGBRST| | | | | |QWERTY|COLEMK| | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | |RGBTOG| HUI | SAI | VAI | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | |RGBMOD| | | | | | | |RGBSMOD| HUD | SAD | VAD | + * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | | | | | | + * `-------------' `-------------' +``` + +## Customize + +see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` + +``` + +# Variables you can set for SOL + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix +LED_ANIMATIONS = yes # LED animations +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port +UNICODE_ENABLE = no # Unicode +SWAP_HANDS_ENABLE = no # Enable one-hand typing +ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) + +OLED_ENABLE = no # OLED_ENABLE (+5000) +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + + +``` +## Compile + +go to qmk top directory. +``` +$ cd qmk_firmware +``` + +build +``` +$ make sol:default +``` + +After the initial flash with AVRdudess, you should be able to flash using this: +``` +$ make sol:default:dfu +``` diff --git a/keyboards/sol/keymaps/default/rules.mk b/keyboards/sol/keymaps/default/rules.mk new file mode 100644 index 000000000..a098cfd78 --- /dev/null +++ b/keyboards/sol/keymaps/default/rules.mk @@ -0,0 +1,50 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) + +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix +RGBLIGHT_ANIMATIONS = yes # LED animations +LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port +UNICODE_ENABLE = no # Unicode +SWAP_HANDS_ENABLE = no # Enable one-hand typing +ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) + +OLED_ENABLE = no # OLED_ENABLE (+5000) +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + +# Do not edit past here + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) + OPT_DEFS += -DENCODER_ENABLE_CUSTOM + SRC += common/knob_v2.c + +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE + +else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) + OPT_DEFS += -DRGBLIGHT_FULL_POWER +endif + +ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) + OPT_DEFS += -DRGB_MATRIX_KEYPRESSES +endif + +ifeq ($(strip $(LED_MIRRORED)), yes) + OPT_DEFS += -DLED_MIRRORED +endif
\ No newline at end of file diff --git a/keyboards/sol/keymaps/kageurufu/config.h b/keyboards/sol/keymaps/kageurufu/config.h new file mode 100644 index 000000000..452cdda82 --- /dev/null +++ b/keyboards/sol/keymaps/kageurufu/config.h @@ -0,0 +1,25 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + + +// place overrides here + diff --git a/keyboards/sol/keymaps/kageurufu/keymap.c b/keyboards/sol/keymaps/kageurufu/keymap.c new file mode 100644 index 000000000..822256d85 --- /dev/null +++ b/keyboards/sol/keymaps/kageurufu/keymap.c @@ -0,0 +1,335 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "common/ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _COLEMAK, + _FN, + _ADJ +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + FN, + ADJ, + BACKLIT, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +#define FN_ESC LT(_FN, KC_ESC) + +// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns + /* Base Layout + * ,------------------------------------------------. ,------------------------------------------------. + * | ` | | | | | | | | | | | | | | BkSp | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | | | | | | | | | | | | | | \ | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Esc | | | | | | | | | | | | | | ' | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Sft( | | | | | | | | | | | | | | Sft) | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Ctrl | Win | Win | Alt | FN | Space| RGB | | FN | FN | - | = | Down | PgUp | PgDn | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Space| Bksp | | Enter| Space| + * `-------------' `--------=----' + */ +#define BASE_LAYOUT( \ + _00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \ + _10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \ + _20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \ +) \ +LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, RGB_MOD, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_BSLS, \ + FN_ESC, _10, _11, _12, _13, _14, RGB_SAI, RGB_VAI, _15, _16, _17, _18, _19, KC_QUOT, \ + KC_LSPO, _20, _21, _22, _23, _24, RGB_SAD, RGB_VAD, _25, _26, _27, _28, _29, KC_RSPC, \ + KC_LCTL, KC_LGUI, KC_LGUI, KC_LALT, FN, KC_SPC, FN, FN, KC_SPC, KC_MINS, KC_EQL, KC_DOWN, KC_PGUP, KC_PGDN, \ + KC_VOLD, KC_VOLU, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, KC_VOLD, KC_VOLU \ +) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | E | R | T | | | | Y | U | I | O | P | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | S | D | F | G | | | | H | J | K | L | ; | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | V | B | | | | N | M | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | + * `-------------' `--------=----' + */ + [_QWERTY] = BASE_LAYOUT( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH \ + ), + + /* Colemak + * ,------------------------------------------------. ,------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | Q | W | F | P | B | | | | J | L | U | Y | ; | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | | A | R | S | T | G | | | | K | N | E | I | O | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | Z | X | C | D | V | [ | | ] | M | H | , | . | / | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | | | | | | + * `-------------' `--------=----' + */ + [_COLEMAK] = BASE_LAYOUT( \ + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, \ + KC_A, KC_R, KC_S, KC_T, KC_G, KC_K, KC_N, KC_E, KC_I, KC_O, \ + KC_Z, KC_X, KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH + ), + + + /* FN + * ,------------------------------------------------. ,------------------------------------------------. + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Ctrl | A | O | E | U | I | | | | D | H | T | N | S | / | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | [ | | ] | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | ADJ | Esc | Alt | GUI | EISU |Lower |Space | |Space |FN | KANA | Left | Down | Up |Right | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |Lower |Space | |Space |FN | + * `-------------' `------------' + */ + [_FN] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, KC_PGDN, KC_UP, KC_PGUP, _______, KC_LBRC, _______, _______, KC_RBRC, KC_7, KC_UP, KC_9, KC_0, KC_HOME, \ + ADJ, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_RBRC, KC_END, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_PGUP, _______, \ + _______, _______, _______, _______, ADJ, _______, ADJ, ADJ, ADJ, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \ + KC_VOLD, KC_VOLU, _______, KC_DEL, _______, _______, KC_VOLD, KC_VOLU \ + ), + + /* ADJ + * ,------------------------------------------------. ,------------------------------------------------. + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Ctrl | A | O | E | U | I | | | | D | H | T | N | S | / | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | [ | | ] | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |ADJ| Esc | Alt | GUI | EISU |Lower |Space | |Space |FN | KANA | Left | Down | Up |Right | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * |Lower |Space | |Space |FN | + * `-------------' `------------' + */ + + [_ADJ] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RGB_SAD, RGB_VAI, RGB_SAI, RESET, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \ + KC_VOLD, KC_VOLU, _______, _______, _______, _______, KC_VOLD, KC_VOLU \ + ) +}; + + +// define variables for reactive RGB +bool TOG_STATUS = false; +int RGB_current_mode; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if(record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case FN: + if (record->event.pressed) { + layer_on(_FN); + } else { + layer_off(_FN); + } + return false; + break; + case ADJ: + if (record->event.pressed) { + layer_on(_ADJ); + } else { + layer_off(_ADJ); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + led_test_init(); + iota_gfx_task(); // this is what updates the display continuously + #endif +} + + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// hook point for 'led_test' keymap +// 'default' keymap's led_test_init() is empty function, do nothing +// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); +__attribute__ ((weak)) +void led_test_init(void) {} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_FN (1<<_FN) +#define L_ADJ (1<<_ADJ) +#define L_ADJ_TRI (L_ADJ|L_FN) + +static void render_logo(struct CharacterMatrix *matrix) { + + static char logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + matrix_write(matrix, logo); + //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); +} + + + +void render_status(struct CharacterMatrix *matrix) { + + // Render to mode icon + static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if(keymap_config.swap_lalt_lgui==false){ + matrix_write(matrix, logo[0][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[0][1]); + }else{ + matrix_write(matrix, logo[1][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[1][1]); + } + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(matrix, PSTR("\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(matrix, PSTR("Default")); + break; + case L_FN: + matrix_write_P(matrix, PSTR("FN")); + break; + case L_ADJ: + case L_ADJ_TRI: + matrix_write_P(matrix, PSTR("ADJ")); + break; + default: + matrix_write(matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(matrix, led); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + matrix_clear(&matrix); + if(is_master){ + render_status(&matrix); + }else{ + render_logo(&matrix); + } + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/sol/keymaps/kageurufu/readme.md b/keyboards/sol/keymaps/kageurufu/readme.md new file mode 100644 index 000000000..07e15682e --- /dev/null +++ b/keyboards/sol/keymaps/kageurufu/readme.md @@ -0,0 +1,47 @@ +# KageUrufu's Sol Layout + +Read the keymap for the layout, I don't want to deal with maintained ascii art + +## Customize + +see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` + +``` +# Variables you can set for SOL + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix +LED_ANIMATIONS = yes # LED animations +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port +UNICODE_ENABLE = no # Unicode +SWAP_HANDS_ENABLE = no # Enable one-hand typing +ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) + +OLED_ENABLE = no # OLED_ENABLE (+5000) +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + +``` +## Compile + +go to qmk top directory. +``` +$ cd qmk_firmware +``` + +build +``` +$ make sol:default +``` + +After the initial flash with AVRdudess, you should be able to flash using this: +``` +$ make sol:default:dfu +```
\ No newline at end of file diff --git a/keyboards/sol/keymaps/kageurufu/rules.mk b/keyboards/sol/keymaps/kageurufu/rules.mk new file mode 100644 index 000000000..d098168fd --- /dev/null +++ b/keyboards/sol/keymaps/kageurufu/rules.mk @@ -0,0 +1,46 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix +LED_ANIMATIONS = yes # LED animations +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) +RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port +UNICODE_ENABLE = no # Unicode +SWAP_HANDS_ENABLE = no # Enable one-hand typing +ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) +OLED_ENABLE = no # OLED_ENABLE (+5000) +IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) + +# Do not edit past here + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) + OPT_DEFS += -DENCODER_ENABLE_CUSTOM + SRC += common/knob_v2.c +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) + OPT_DEFS += -DRGBLIGHT_FULL_POWER +endif + +ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) + OPT_DEFS += -DRGB_MATRIX_KEYPRESSES +endif + +ifeq ($(strip $(LED_MIRRORED)), yes) + OPT_DEFS += -DLED_MIRRORED +endif diff --git a/keyboards/sol/readme.md b/keyboards/sol/readme.md new file mode 100644 index 000000000..65e89ff63 --- /dev/null +++ b/keyboards/sol/readme.md @@ -0,0 +1,15 @@ +# Sol + + + +Sol is a split ergonomic keyboard with ortholinear alphas and several modifier layouts. It can use up to 88 RGB LEDs, with per-key backlighting and underglow. The boards have presoldered components, including type C ports and ATmega32U4. Sol, when used with dual power supplies, is the brightest keyboard on earth. + +Keyboard Maintainer: [Legonut](https://github.com/Legonut) +Hardware Supported: Sol PCB R1.0, R1.1 +Hardware Availability: [RGBKB](https://www.rgbkb.net) + +Make example for this keyboard (after setting up your build environment): + + make sol:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sol/rev1/config.h b/keyboards/sol/rev1/config.h new file mode 100644 index 000000000..fc91b8d49 --- /dev/null +++ b/keyboards/sol/rev1/config.h @@ -0,0 +1,155 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER RGBKB +#define PRODUCT Sol +#define DESCRIPTION "An RGB, split, ortho-esque keyboard" + + +#define PREVENT_STUCK_MODIFIERS +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 150 + +#define USE_I2C +#define USE_SERIAL +#define USE_SERIAL_PD3 + +/* Select hand configuration */ +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +// Helix keyboard OLED support +// see ./rules.mk: OLED_ENABLE=yes or no +#ifdef OLED_ENABLE + #define SSD1306OLED +#endif + +/* Select rows configuration */ +// Rows are 4 or 5 +// #define HELIX_ROWS 5 see ./rules.mk + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 12 +#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6} + +// wiring of each half +#define MATRIX_COLS 7 +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 } +// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN B3 +#define RGBLIGHT_TIMER +//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL 70 +// #define RGB_MATRIX_KEYPRESSES +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 5 + +#ifdef LED_MIRRORED + #define RGBLED_NUM 35 +#else + #define RGBLED_NUM 70 +#endif + +#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950 + +#ifdef IOS_DEVICE_ENABLE + #define RGBLIGHT_LIMIT_VAL 40 + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40 +#elif RGBLIGHT_FULL_POWER + #define RGBLIGHT_LIMIT_VAL 255 + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 +#else + #define RGBLIGHT_LIMIT_VAL 120 + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 +#endif + +#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10) +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#define RGBLIGHT_ANIMATIONS + +#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) +// USB_MAX_POWER_CONSUMPTION value for Helix keyboard +// 120 RGBoff, OLEDoff +// 120 OLED +// 330 RGB 6 +// 300 RGB 32 +// 310 OLED & RGB 32 + #define USB_MAX_POWER_CONSUMPTION 500 +#else + // fix iPhone and iPad power adapter issue + // iOS device need lessthan 100 + #define USB_MAX_POWER_CONSUMPTION 100 +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif diff --git a/keyboards/sol/rev1/matrix.c b/keyboards/sol/rev1/matrix.c new file mode 100644 index 000000000..804d8b980 --- /dev/null +++ b/keyboards/sol/rev1/matrix.c @@ -0,0 +1,304 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include <drivers/avr/pro_micro.h> + +#include "serial.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#ifdef ENCODER_ENABLE_CUSTOM + #include "common/knob_v2.h" +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; +uint8_t is_master = 0 ; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); +static uint8_t matrix_master_scan(void); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + is_master = has_usb(); + + #ifdef ENCODER_ENABLE_CUSTOM + knob_init(); //FOR ENCODER + #endif + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + #ifdef ENCODER_ENABLE_CUSTOM + knob_report_t knob_report = knob_report_read(); + + knob_report_reset(); + + matrix[5 + offset] &= 0b11111100; + if (knob_report.phase) { // I check for phase to avoid handling the rotation twice (on 90 and 270 degrees). + if (knob_report.dir > 0) { + matrix[5 + offset] |= 0b00000001; + } else if (knob_report.dir < 0) { + matrix[5 + offset] |= 0b00000010; + } + } + #endif + + return 1; +} + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + int ret=serial_update_buffers(); + if (ret ) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} + +uint8_t matrix_scan(void) +{ + if (is_master) { + matrix_master_scan(); + }else{ + matrix_slave_scan(); + + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[offset+i] = serial_master_buffer[i]; + } + + matrix_scan_quantum(); + } + return 1; +} + + +uint8_t matrix_master_scan(void) { + + int ret = _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_master_buffer[i] = matrix[offset+i]; + } + + if( serial_transaction() ) { + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_cols(void) +{ + for(int x = 0; x < MATRIX_COLS; x++) { + _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/sol/rev1/rev1.c b/keyboards/sol/rev1/rev1.c new file mode 100644 index 000000000..01ab577d4 --- /dev/null +++ b/keyboards/sol/rev1/rev1.c @@ -0,0 +1,15 @@ +#include "sol.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + //led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + matrix_init_user(); +}; + diff --git a/keyboards/sol/rev1/rev1.h b/keyboards/sol/rev1/rev1.h new file mode 100644 index 000000000..27b5ac896 --- /dev/null +++ b/keyboards/sol/rev1/rev1.h @@ -0,0 +1,70 @@ +#ifndef REV1_H +#define REV1_H + +#include "sol.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +#ifdef RGBLIGHT_ENABLE +//rgb led driver +#include "ws2812.h" +#endif + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + +//void promicro_bootloader_jmp(bool program); +// LEL/LER/REL/RER are +// LeftEncoderLeft, LeftEncoderRight, RightEncoderLeft, and RightEncoderRight + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ + LEL, LER, L55, L56, R56, R50, REL, RER \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05, L06 }, \ + { L10, L11, L12, L13, L14, L15, L16 }, \ + { L20, L21, L22, L23, L24, L25, L26 }, \ + { L30, L31, L32, L33, L34, L35, L36 }, \ + { L40, L41, L42, L43, L44, L45, L46 }, \ + { LEL, LER, KC_NO, KC_NO, KC_NO, L55, L56 }, \ + { R05, R04, R03, R02, R01, R00, R06 }, \ + { R15, R14, R13, R12, R11, R10, R16 }, \ + { R25, R24, R23, R22, R21, R20, R26 }, \ + { R35, R34, R33, R32, R31, R30, R36 }, \ + { R45, R44, R43, R42, R41, R40, R46 }, \ + { REL, RER, KC_NO, KC_NO, KC_NO, R50, R56 } \ + } + +#define KC________ KC_TRNS +#define KC_RGB_MOD RGB_MOD +#define KC_FN FN +#define KC_ADJ ADJ +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ + LEL, LER, L55, L56, R56, R50, REL, RER \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ + KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \ + KC_##LEL, KC_##LER, KC_##L55, KC_##L56, KC_##R56, KC_##R50, KC_##REL, KC_##RER \ + ) + +#endif diff --git a/keyboards/sol/rev1/rules.mk b/keyboards/sol/rev1/rules.mk new file mode 100644 index 000000000..99f4dd896 --- /dev/null +++ b/keyboards/sol/rev1/rules.mk @@ -0,0 +1,2 @@ +SRC += rev1/matrix.c \ + rev1/split_util.c diff --git a/keyboards/sol/rev1/split_util.c b/keyboards/sol/rev1/split_util.c new file mode 100644 index 000000000..c645bbdfe --- /dev/null +++ b/keyboards/sol/rev1/split_util.c @@ -0,0 +1,54 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "serial.h" + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + #if defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { + serial_master_init(); +} + +static void keyboard_slave_setup(void) { + serial_slave_init(); +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1<<VBUS)); //checks state of VBUS +} + +void split_keyboard_setup(void) { + setup_handedness(); + + if (has_usb()) { + keyboard_master_setup(); + } else { + keyboard_slave_setup(); + } + sei(); +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) { + split_keyboard_setup(); +} diff --git a/keyboards/sol/rev1/split_util.h b/keyboards/sol/rev1/split_util.h new file mode 100644 index 000000000..59b362415 --- /dev/null +++ b/keyboards/sol/rev1/split_util.h @@ -0,0 +1,17 @@ +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include <stdbool.h> +#include "eeconfig.h" + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/sol/rules.mk b/keyboards/sol/rules.mk new file mode 100644 index 000000000..f53e5b21f --- /dev/null +++ b/keyboards/sol/rules.mk @@ -0,0 +1,71 @@ +SRC += i2c.c \ + serial.c \ + common/ssd1306.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = qmk-dfu + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +DEFAULT_FOLDER = sol/rev1 diff --git a/keyboards/sol/serial.c b/keyboards/sol/serial.c new file mode 100644 index 000000000..169b4b176 --- /dev/null +++ b/keyboards/sol/serial.c @@ -0,0 +1,288 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <stdbool.h> +#include "serial.h" + +#ifdef USE_SERIAL + +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// Serial pulse period in microseconds. +#define SELECT_SERIAL_SPEED 1 +#if SELECT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 10 // cycles +#elif SELECT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #define READ_WRITE_START_ADJUST 23 // cycles + #define READ_WRITE_WIDTH_ADJUST 10 // cycles +#elif SELECT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 25 // cycles + #define READ_WRITE_WIDTH_ADJUST 10 // cycles +#elif SELECT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 25 // cycles + #define READ_WRITE_WIDTH_ADJUST 10 // cycles +#elif SELECT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 50 // micro sec + #define READ_WRITE_START_ADJUST 25 // cycles + #define READ_WRITE_WIDTH_ADJUST 10 // cycles +#else +#error Illegal Serial Speed +#endif + + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH 1 +#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); +} + +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input_with_pullup(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input_with_pullup(); + + +// Enable INT3 +EIMSK |= _BV(INT3); +// Trigger on falling edge of INT3 +EICRA &= ~(_BV(ISC30) | _BV(ISC31)); + +} + +// Used by the sender to synchronize timing with the reciver. +static +void sync_recv(void) { + for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); +} + +// Used by the reciver to send a synchronization signal to the sender. +static +void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + _delay_sub_us(READ_WRITE_START_ADJUST); + for ( uint8_t i = 0; i < 8; ++i) { + serial_delay_half1(); // read the middle of pulses + byte = (byte << 1) | serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 1<<7; + while( b ) { + if(data & b) { + serial_high(); + } else { + serial_low(); + } + b >>= 1; + serial_delay(); + } + serial_low(); // sync_send() / senc_recv() need raise edge +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + serial_output(); + + // slave send phase + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + sync_send(); + serial_write_byte(serial_slave_buffer[i]); + checksum += serial_slave_buffer[i]; + } + sync_send(); + serial_write_byte(checksum); + + // slave switch to input + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 + + // slave recive phase + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + sync_recv(); + serial_master_buffer[i] = serial_read_byte(); + checksum_computed += serial_master_buffer[i]; + } + sync_recv(); + uint8_t checksum_received = serial_read_byte(); + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } + + sync_recv(); //weit master output to high +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH); + + // wait for the slaves response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + sei(); + return 1; + } + + // master recive phase + // if the slave is present syncronize with it + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + sync_recv(); + serial_slave_buffer[i] = serial_read_byte(); + checksum_computed += serial_slave_buffer[i]; + } + sync_recv(); + uint8_t checksum_received = serial_read_byte(); + + if (checksum_computed != checksum_received) { + serial_output(); + serial_high(); + sei(); + return 2; + } + + // master switch to output + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); // 3 + serial_delay_half1(); //4 + + // master send phase + uint8_t checksum = 0; + + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + sync_send(); + serial_write_byte(serial_master_buffer[i]); + checksum += serial_master_buffer[i]; + } + sync_send(); + serial_write_byte(checksum); + + // always, release the line when not in use + sync_send(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/sol/serial.h b/keyboards/sol/serial.h new file mode 100644 index 000000000..cd6bcc76b --- /dev/null +++ b/keyboards/sol/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include <stdbool.h> + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD3) //SErial pin goes here, D0-D3 +#define SERIAL_PIN_INTERRUPT INT3_vect //"INT#" of your serial pin + + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/sol/sol.c b/keyboards/sol/sol.c new file mode 100644 index 000000000..5945cc60a --- /dev/null +++ b/keyboards/sol/sol.c @@ -0,0 +1 @@ +#include "sol.h" diff --git a/keyboards/sol/sol.h b/keyboards/sol/sol.h new file mode 100644 index 000000000..8f451ce56 --- /dev/null +++ b/keyboards/sol/sol.h @@ -0,0 +1,7 @@ +#ifndef SOL_H +#define SOL_H + +#include "rev1.h" +#include "quantum.h" + +#endif |