/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
Parts of this file have been contributed by Matthias Blaicher.
*/
/**
* @file hal_mmc_spi.c
* @brief MMC over SPI driver code.
*
* @addtogroup MMC_SPI
* @{
*/
#include <string.h>
#include "hal.h"
#if (HAL_USE_MMC_SPI == TRUE) || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/* Forward declarations required by mmc_vmt.*/
static bool mmc_read(void *instance, uint32_t startblk,
uint8_t *buffer, uint32_t n);
static bool mmc_write(void *instance, uint32_t startblk,
const uint8_t *buffer, uint32_t n);
/**
* @brief Virtual methods table.
*/
static const struct MMCDriverVMT mmc_vmt = {
(bool (*)(void *))mmc_lld_is_card_inserted,
(bool (*)(void *))mmc_lld_is_write_protected,
(bool (*)(void *))mmcConnect,
(bool (*)(void *))mmcDisconnect,
mmc_read,
mmc_write,
(bool (*)(void *))mmcSync,
(bool (*)(void *, BlockDeviceInfo *))mmcGetInfo
};
/**
* @brief Lookup table for CRC-7 ( based on polynomial x^7 + x^3 + 1).
*/
static const uint8_t crc7_lookup_table[256] = {
0x00, 0x09, 0x12, 0x1b, 0x24, 0x2d, 0x36, 0x3f, 0x48, 0x41, 0x5a, 0x53,
0x6c, 0x65, 0x7e, 0x77, 0x19, 0x10, 0x0b, 0x02, 0x3d, 0x34, 0x2f, 0x26,
0x51, 0x58, 0x43, 0x4a, 0x75, 0x7c, 0x67, 0x6e, 0x32, 0x3b, 0x20, 0x29,
0x16, 0x1f, 0x04, 0x0d, 0x7a, 0x73, 0x68, 0x61, 0x5e, 0x57, 0x4c, 0x45,
0x2b, 0x22, 0x39, 0x30, 0x0f, 0x06, 0x1d, 0x14, 0x63, 0x6a, 0x71, 0x78,
0x47, 0x4e, 0x55, 0x5c, 0x64, 0x6d, 0x76, 0x7f, 0x40, 0x49, 0x52, 0x5b,
0x2c, 0x25, 0x3e, 0x37, 0x08, 0x01, 0x1a, 0x13, 0x7d, 0x74, 0x6f, 0x66,
0x59, 0x50, 0x4b, 0x42, 0x35, 0x3c, 0x27, 0x2e, 0x11, 0x18, 0x03, 0x0a,
0x56, 0x5f, 0x44, 0x4d, 0x72, 0x7b, 0x60, 0x69, 0x1e, 0x17, 0x0c, 0x05,
0x3a, 0x33, 0x28, 0x21, 0x4f, 0x46, 0x5d, 0x54, 0x6b, 0x62, 0x79, 0x70,
0x07, 0x0e, 0x15, 0x1c, 0x23, 0x2a, 0x31, 0x38, 0x41, 0x48, 0x53, 0x5a,
0x65, 0x6c, 0x77, 0x7e, 0x09, 0x00, 0x1b, 0x12, 0x2d, 0x24, 0x3f, 0x36,
0x58, 0x51, 0x4a, 0x43, 0x7c, 0x75, 0x6e, 0x67, 0x10, 0x19, 0x02, 0x0b,
0x34, 0x3d, 0x26, 0x2f, 0x73, 0x7a, 0x61, 0x68, 0x57, 0x5e, 0x45, 0x4c,
0x3b, 0x32, 0x29, 0x20, 0x1f, 0x16, 0x0d, 0x04, 0x6a, 0x63, 0x78, 0x71,
0x4e, 0x47, 0x5c, 0x55, 0x22, 0x2b, 0x30, 0x39, 0x06, 0x0f, 0x14, 0x1d,
0x25, 0x2c, 0x37, 0x3e, 0x01, 0x08, 0x13, 0x1a, 0x6d, 0x64, 0x7f, 0x76,
0x49, 0x40, 0x5b, 0x52, 0x3c, 0x35, 0x2e, 0x27, 0x18, 0x11, 0x0a, 0x03,
0x74, 0x7d, 0x66, 0x6f, 0x50, 0x59, 0x42, 0x4b, 0x17, 0x1e, 0x05, 0x0c,
0x33, 0x3a, 0x21, 0x28, 0x5f, 0x56, 0x4d, 0x44, 0x7b, 0x72, 0x69, 0x60,
0x0e, 0x07, 0x1c, 0x15, 0x2a, 0x23, 0x38, 0x31, 0x46, 0x4f, 0x54, 0x5d,
0x62, 0x6b, 0x70, 0x79
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static bool mmc_read(void *instance, uint32_t startblk,
uint8_t *buffer, uint32_t n) {
if (mmcStartSequentialRead((MMCDriver *)instance, startblk)) {
return HAL_FAILED;
}
while (n > 0U) {
if (mmcSequentialRead((MMCDriver *)instance, buffer)) {
return HAL_FAILED;
}
buffer += MMCSD_BLOCK_SIZE;
n--;
}
if (mmcStopSequentialRead((MMCDriver *)instance)) {
return HAL_FAILED;
}
return HAL_SUCCESS;
}
static bool mmc_write(void *instance, uint32_t startblk,
const uint8_t *buffer, uint32_t n) {
if (mmcStartSequentialWrite((MMCDriver *)instance, startblk)) {
return HAL_FAILED;
}
while (n > 0U) {
if (mmcSequentialWrite((MMCDriver *)instance, buffer)) {
return HAL_FAILED;
}
buffer += MMCSD_BLOCK_SIZE;
n--;
}
if (mmcStopSequentialWrite((MMCDriver *)instance)) {
return HAL_FAILED;
}
return HAL_SUCCESS;
}
/**
* @brief Calculate the MMC standard CRC-7 based on a lookup table.
*
* @param[in] crc start value for CRC
* @param[in] buffer pointer to data buffer
* @param[in] len length of data
* @return Calculated CRC
*/
static uint8_t crc7(uint8_t crc, const uint8_t *buffer, size_t len) {
while (len > 0U) {
crc = crc7_lookup_table[(crc << 1) ^ (*buffer++)];
len--;
}
return crc;
}
/**
* @brief Waits an idle condition.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @notapi
*/
static void wait(MMCDriver *mmcp) {
int i;
uint8_t buf[4];
for (i = 0; i < 16; i++) {
spiReceive(mmcp->config->spip, 1, buf);
if (buf[0] == 0xFFU) {
return;
}
}
/* Looks like it is a long wait.*/
while (true) {
spiReceive(mmcp->config->spip, 1, buf);
if (buf[0] == 0xFFU) {
break;
}
#if MMC_NICE_WAITING == TRUE
/* Trying to be nice with the other threads.*/
osalThreadSleepMilliseconds(1);
#endif
}
}
/**
* @brief Sends a command header.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] cmd the command id
* @param[in] arg the command argument
*
* @notapi
*/
static void send_hdr(MMCDriver *mmcp, uint8_t cmd, uint32_t arg) {
uint8_t buf[6];
/* Wait for the bus to become idle if a write operation was in progress.*/
wait(mmcp);
buf[0] = (uint8_t)0x40U | cmd;
buf[1] = (uint8_t)(arg >> 24U);
buf[2] = (uint8_t)(arg >> 16U);
buf[3] = (uint8_t)(arg >> 8U);
buf[4] = (uint8_t)arg;
/* Calculate CRC for command header, shift to right position, add stop bit.*/
buf[5] = ((crc7(0, buf, 5U) & 0x7FU) << 1U) | 0x01U;
spiSend(mmcp->config->spip, 6, buf);
}
/**
* @brief Receives a single byte response.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @return The response as an @p uint8_t value.
* @retval 0xFF timed out.
*
* @notapi
*/
static uint8_t recvr1(MMCDriver *mmcp) {
int i;
uint8_t r1[1];
for (i = 0; i < 9; i++) {
spiReceive(mmcp->config->spip, 1, r1);
if (r1[0] != 0xFFU) {
return r1[0];
}
}
return 0xFFU;
}
/**
* @brief Receives a three byte response.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[out] buffer pointer to four bytes wide buffer
* @return First response byte as an @p uint8_t value.
* @retval 0xFF timed out.
*
* @notapi
*/
static uint8_t recvr3(MMCDriver *mmcp, uint8_t* buffer) {
uint8_t r1;
r1 = recvr1(mmcp);
spiReceive(mmcp->config->spip, 4, buffer);
return r1;
}
/**
* @brief Sends a command an returns a single byte response.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] cmd the command id
* @param[in] arg the command argument
* @return The response as an @p uint8_t value.
* @retval 0xFF timed out.
*
* @notapi
*/
static uint8_t send_command_R1(MMCDriver *mmcp, uint8_t cmd, uint32_t arg) {
uint8_t r1;
spiSelect(mmcp->config->spip);
send_hdr(mmcp, cmd, arg);
r1 = recvr1(mmcp);
spiUnselect(mmcp->config->spip);
return r1;
}
/**
* @brief Sends a command which returns a five bytes response (R3).
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] cmd the command id
* @param[in] arg the command argument
* @param[out] response pointer to four bytes wide uint8_t buffer
* @return The first byte of the response (R1) as an @p
* uint8_t value.
* @retval 0xFF timed out.
*
* @notapi
*/
static uint8_t send_command_R3(MMCDriver *mmcp, uint8_t cmd, uint32_t arg,
uint8_t *response) {
uint8_t r1;
spiSelect(mmcp->config->spip);
send_hdr(mmcp, cmd, arg);
r1 = recvr3(mmcp, response);
spiUnselect(mmcp->config->spip);
return r1;
}
/**
* @brief Reads the CSD.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[out] cmd command
* @param[out] cxd pointer to the CSD/CID buffer
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @notapi
*/
static bool read_CxD(MMCDriver *mmcp, uint8_t cmd, uint32_t cxd[4]) {
unsigned i;
uint8_t *bp, buf[16];
spiSelect(mmcp->config->spip);
send_hdr(mmcp, cmd, 0);
if (recvr1(mmcp) != 0x00U) {
spiUnselect(mmcp->config->spip);
return HAL_FAILED;
}
/* Wait for data availability.*/
for (i = 0U; i < MMC_WAIT_DATA; i++) {
spiReceive(mmcp->config->spip, 1, buf);
if (buf[0] == 0xFEU) {
uint32_t *wp;
spiReceive(mmcp->config->spip, 16, buf);
bp = buf;
for (wp = &cxd[3]; wp >= cxd; wp--) {
*wp = ((uint32_t)bp[0] << 24U) | ((uint32_t)bp[1] << 16U) |
((uint32_t)bp[2] << 8U) | (uint32_t)bp[3];
bp += 4;
}
/* CRC ignored then end of transaction. */
spiIgnore(mmcp->config->spip, 2);
spiUnselect(mmcp->config->spip);
return HAL_SUCCESS;
}
}
return HAL_FAILED;
}
/**
* @brief Waits that the card reaches an idle state.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @notapi
*/
static void sync(MMCDriver *mmcp) {
uint8_t buf[1];
spiSelect(mmcp->config->spip);
while (true) {
spiReceive(mmcp->config->spip, 1, buf);
if (buf[0] == 0xFFU) {
break;
}
#if MMC_NICE_WAITING == TRUE
/* Trying to be nice with the other threads.*/
osalThreadSleepMilliseconds(1);
#endif
}
spiUnselect(mmcp->config->spip);
}
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief MMC over SPI driver initialization.
* @note This function is implicitly invoked by @p halInit(), there is
* no need to explicitly initialize the driver.
*
* @init
*/
void mmcInit(void) {
}
/**
* @brief Initializes an instance.
*
* @param[out] mmcp pointer to the @p MMCDriver object
*
* @init
*/
void mmcObjectInit(MMCDriver *mmcp) {
mmcp->vmt = &mmc_vmt;
mmcp->state = BLK_STOP;
mmcp->config = NULL;
mmcp->block_addresses = false;
}
/**
* @brief Configures and activates the MMC peripheral.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] config pointer to the @p MMCConfig object.
*
* @api
*/
void mmcStart(MMCDriver *mmcp, const MMCConfig *config) {
osalDbgCheck((mmcp != NULL) && (config != NULL));
osalDbgAssert((mmcp->state == BLK_STOP) || (mmcp->state == BLK_ACTIVE),
"invalid state");
mmcp->config = config;
mmcp->state = BLK_ACTIVE;
}
/**
* @brief Disables the MMC peripheral.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @api
*/
void mmcStop(MMCDriver *mmcp) {
osalDbgCheck(mmcp != NULL);
osalDbgAssert((mmcp->state == BLK_STOP) || (mmcp->state == BLK_ACTIVE),
"invalid state");
spiStop(mmcp->config->spip);
mmcp->config = NULL;
mmcp->state = BLK_STOP;
}
/**
* @brief Performs the initialization procedure on the inserted card.
* @details This function should be invoked when a card is inserted and
* brings the driver in the @p MMC_READY state where it is possible
* to perform read and write operations.
* @note It is possible to invoke this function from the insertion event
* handler.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded and the driver is now
* in the @p MMC_READY state.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcConnect(MMCDriver *mmcp) {
unsigned i;
uint8_t r3[4];
osalDbgCheck(mmcp != NULL);
osalDbgAssert((mmcp->state == BLK_ACTIVE) || (mmcp->state == BLK_READY),
"invalid state");
/* Connection procedure in progress.*/
mmcp->state = BLK_CONNECTING;
mmcp->block_addresses = false;
/* Slow clock mode and 128 clock pulses.*/
spiStart(mmcp->config->spip, mmcp->config->lscfg);
spiIgnore(mmcp->config->spip, 16);
/* SPI mode selection.*/
i = 0;
while (true) {
if (send_command_R1(mmcp, MMCSD_CMD_GO_IDLE_STATE, 0) == 0x01U) {
break;
}
if (++i >= MMC_CMD0_RETRY) {
goto failed;
}
osalThreadSleepMilliseconds(10);
}
/* Try to detect if this is a high capacity card and switch to block
addresses if possible.
This method is based on "How to support SDC Ver2 and high capacity cards"
by ElmChan.*/
if (send_command_R3(mmcp, MMCSD_CMD_SEND_IF_COND,
MMCSD_CMD8_PATTERN, r3) != 0x05U) {
/* Switch to SDHC mode.*/
i = 0;
while (true) {
/*lint -save -e9007 [13.5] Side effect unimportant.*/
if ((send_command_R1(mmcp, MMCSD_CMD_APP_CMD, 0) == 0x01U) &&
(send_command_R3(mmcp, MMCSD_CMD_APP_OP_COND, 0x400001AAU, r3) == 0x00U)) {
/*lint -restore*/
break;
}
if (++i >= MMC_ACMD41_RETRY) {
goto failed;
}
osalThreadSleepMilliseconds(10);
}
/* Execute dedicated read on OCR register */
(void) send_command_R3(mmcp, MMCSD_CMD_READ_OCR, 0, r3);
/* Check if CCS is set in response. Card operates in block mode if set.*/
if ((r3[0] & 0x40U) != 0U) {
mmcp->block_addresses = true;
}
}
/* Initialization.*/
i = 0;
while (true) {
uint8_t b = send_command_R1(mmcp, MMCSD_CMD_INIT, 0);
if (b == 0x00U) {
break;
}
if (b != 0x01U) {
goto failed;
}
if (++i >= MMC_CMD1_RETRY) {
goto failed;
}
osalThreadSleepMilliseconds(10);
}
/* Initialization complete, full speed.*/
spiStart(mmcp->config->spip, mmcp->config->hscfg);
/* Setting block size.*/
if (send_command_R1(mmcp, MMCSD_CMD_SET_BLOCKLEN,
MMCSD_BLOCK_SIZE) != 0x00U) {
goto failed;
}
/* Determine capacity.*/
if (read_CxD(mmcp, MMCSD_CMD_SEND_CSD, mmcp->csd)) {
goto failed;
}
mmcp->capacity = _mmcsd_get_capacity(mmcp->csd);
if (mmcp->capacity == 0U) {
goto failed;
}
if (read_CxD(mmcp, MMCSD_CMD_SEND_CID, mmcp->cid)) {
goto failed;
}
mmcp->state = BLK_READY;
return HAL_SUCCESS;
/* Connection failed, state reset to BLK_ACTIVE.*/
failed:
spiStop(mmcp->config->spip);
mmcp->state = BLK_ACTIVE;
return HAL_FAILED;
}
/**
* @brief Brings the driver in a state safe for card removal.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @return The operation status.
*
* @retval HAL_SUCCESS the operation succeeded and the driver is now
* in the @p MMC_INSERTED state.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcDisconnect(MMCDriver *mmcp) {
osalDbgCheck(mmcp != NULL);
osalSysLock();
osalDbgAssert((mmcp->state == BLK_ACTIVE) || (mmcp->state == BLK_READY),
"invalid state");
if (mmcp->state == BLK_ACTIVE) {
osalSysUnlock();
return HAL_SUCCESS;
}
mmcp->state = BLK_DISCONNECTING;
osalSysUnlock();
/* Wait for the pending write operations to complete.*/
spiStart(mmcp->config->spip, mmcp->config->hscfg);
sync(mmcp);
spiStop(mmcp->config->spip);
mmcp->state = BLK_ACTIVE;
return HAL_SUCCESS;
}
/**
* @brief Starts a sequential read.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] startblk first block to read
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcStartSequentialRead(MMCDriver *mmcp, uint32_t startblk) {
osalDbgCheck(mmcp != NULL);
osalDbgAssert(mmcp->state == BLK_READY, "invalid state");
/* Read operation in progress.*/
mmcp->state = BLK_READING;
/* (Re)starting the SPI in case it has been reprogrammed externally, it can
happen if the SPI bus is shared among multiple peripherals.*/
spiStart(mmcp->config->spip, mmcp->config->hscfg);
spiSelect(mmcp->config->spip);
if (mmcp->block_addresses) {
send_hdr(mmcp, MMCSD_CMD_READ_MULTIPLE_BLOCK, startblk);
}
else {
send_hdr(mmcp, MMCSD_CMD_READ_MULTIPLE_BLOCK, startblk * MMCSD_BLOCK_SIZE);
}
if (recvr1(mmcp) != 0x00U) {
spiStop(mmcp->config->spip);
mmcp->state = BLK_READY;
return HAL_FAILED;
}
return HAL_SUCCESS;
}
/**
* @brief Reads a block within a sequential read operation.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[out] buffer pointer to the read buffer
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcSequentialRead(MMCDriver *mmcp, uint8_t *buffer) {
unsigned i;
osalDbgCheck((mmcp != NULL) && (buffer != NULL));
if (mmcp->state != BLK_READING) {
return HAL_FAILED;
}
for (i = 0; i < MMC_WAIT_DATA; i++) {
spiReceive(mmcp->config->spip, 1, buffer);
if (buffer[0] == 0xFEU) {
spiReceive(mmcp->config->spip, MMCSD_BLOCK_SIZE, buffer);
/* CRC ignored. */
spiIgnore(mmcp->config->spip, 2);
return HAL_SUCCESS;
}
}
/* Timeout.*/
spiUnselect(mmcp->config->spip);
spiStop(mmcp->config->spip);
mmcp->state = BLK_READY;
return HAL_FAILED;
}
/**
* @brief Stops a sequential read gracefully.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcStopSequentialRead(MMCDriver *mmcp) {
static const uint8_t stopcmd[] = {
(uint8_t)(0x40U | MMCSD_CMD_STOP_TRANSMISSION), 0, 0, 0, 0, 1, 0xFF
};
osalDbgCheck(mmcp != NULL);
if (mmcp->state != BLK_READING) {
return HAL_FAILED;
}
spiSend(mmcp->config->spip, sizeof(stopcmd), stopcmd);
/* result = recvr1(mmcp) != 0x00U;*/
/* Note, ignored r1 response, it can be not zero, unknown issue.*/
(void) recvr1(mmcp);
/* Read operation finished.*/
spiUnselect(mmcp->config->spip);
mmcp->state = BLK_READY;
return HAL_SUCCESS;
}
/**
* @brief Starts a sequential write.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] startblk first block to write
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcStartSequentialWrite(MMCDriver *mmcp, uint32_t startblk) {
osalDbgCheck(mmcp != NULL);
osalDbgAssert(mmcp->state == BLK_READY, "invalid state");
/* Write operation in progress.*/
mmcp->state = BLK_WRITING;
spiStart(mmcp->config->spip, mmcp->config->hscfg);
spiSelect(mmcp->config->spip);
if (mmcp->block_addresses) {
send_hdr(mmcp, MMCSD_CMD_WRITE_MULTIPLE_BLOCK, startblk);
}
else {
send_hdr(mmcp, MMCSD_CMD_WRITE_MULTIPLE_BLOCK,
startblk * MMCSD_BLOCK_SIZE);
}
if (recvr1(mmcp) != 0x00U) {
spiStop(mmcp->config->spip);
mmcp->state = BLK_READY;
return HAL_FAILED;
}
return HAL_SUCCESS;
}
/**
* @brief Writes a block within a sequential write operation.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[out] buffer pointer to the write buffer
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcSequentialWrite(MMCDriver *mmcp, const uint8_t *buffer) {
static const uint8_t start[] = {0xFF, 0xFC};
uint8_t b[1];
osalDbgCheck((mmcp != NULL) && (buffer != NULL));
if (mmcp->state != BLK_WRITING) {
return HAL_FAILED;
}
spiSend(mmcp->config->spip, sizeof(start), start); /* Data prologue. */
spiSend(mmcp->config->spip, MMCSD_BLOCK_SIZE, buffer);/* Data. */
spiIgnore(mmcp->config->spip, 2); /* CRC ignored. */
spiReceive(mmcp->config->spip, 1, b);
if ((b[0] & 0x1FU) == 0x05U) {
wait(mmcp);
return HAL_SUCCESS;
}
/* Error.*/
spiUnselect(mmcp->config->spip);
spiStop(mmcp->config->spip);
mmcp->state = BLK_READY;
return HAL_FAILED;
}
/**
* @brief Stops a sequential write gracefully.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcStopSequentialWrite(MMCDriver *mmcp) {
static const uint8_t stop[] = {0xFD, 0xFF};
osalDbgCheck(mmcp != NULL);
if (mmcp->state != BLK_WRITING) {
return HAL_FAILED;
}
spiSend(mmcp->config->spip, sizeof(stop), stop);
spiUnselect(mmcp->config->spip);
/* Write operation finished.*/
mmcp->state = BLK_READY;
return HAL_SUCCESS;
}
/**
* @brief Waits for card idle condition.
*
* @param[in] mmcp pointer to the @p MMCDriver object
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcSync(MMCDriver *mmcp) {
osalDbgCheck(mmcp != NULL);
if (mmcp->state != BLK_READY) {
return HAL_FAILED;
}
/* Synchronization operation in progress.*/
mmcp->state = BLK_SYNCING;
spiStart(mmcp->config->spip, mmcp->config->hscfg);
sync(mmcp);
/* Synchronization operation finished.*/
mmcp->state = BLK_READY;
return HAL_SUCCESS;
}
/**
* @brief Returns the media info.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[out] bdip pointer to a @p BlockDeviceInfo structure
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcGetInfo(MMCDriver *mmcp, BlockDeviceInfo *bdip) {
osalDbgCheck((mmcp != NULL) && (bdip != NULL));
if (mmcp->state != BLK_READY) {
return HAL_FAILED;
}
bdip->blk_num = mmcp->capacity;
bdip->blk_size = MMCSD_BLOCK_SIZE;
return HAL_SUCCESS;
}
/**
* @brief Erases blocks.
*
* @param[in] mmcp pointer to the @p MMCDriver object
* @param[in] startblk starting block number
* @param[in] endblk ending block number
*
* @return The operation status.
* @retval HAL_SUCCESS the operation succeeded.
* @retval HAL_FAILED the operation failed.
*
* @api
*/
bool mmcErase(MMCDriver *mmcp, uint32_t startblk, uint32_t endblk) {
osalDbgCheck((mmcp != NULL));
/* Erase operation in progress.*/
mmcp->state = BLK_WRITING;
/* Handling command differences between HC and normal cards.*/
if (!mmcp->block_addresses) {
startblk *= MMCSD_BLOCK_SIZE;
endblk *= MMCSD_BLOCK_SIZE;
}
if (send_command_R1(mmcp, MMCSD_CMD_ERASE_RW_BLK_START, startblk) != 0x00U) {
goto failed;
}
if (send_command_R1(mmcp, MMCSD_CMD_ERASE_RW_BLK_END, endblk) != 0x00U) {
goto failed;
}
if (send_command_R1(mmcp, MMCSD_CMD_ERASE, 0) != 0x00U) {
goto failed;
}
mmcp->state = BLK_READY;
return HAL_SUCCESS;
/* Command failed, state reset to BLK_ACTIVE.*/
failed:
spiStop(mmcp->config->spip);
mmcp->state = BLK_READY;
return HAL_FAILED;
}
#endif /* HAL_USE_MMC_SPI == TRUE */
/** @} */