From ab87baa16a80b6c75799aa13b36ec294769d426c Mon Sep 17 00:00:00 2001
From: Theodore Ateba <tf.ateba@gmail.com>
Date: Mon, 12 Feb 2018 20:18:58 +0000
Subject: AVR: Add a testhal demo for XMEGA128U4A to test the SERIAL low level
 driver.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11496 35acf78f-673a-0410-8e92-d51de3d6d3f4
---
 testhal/AVR/XMEGA/SERIAL/main.c | 80 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 testhal/AVR/XMEGA/SERIAL/main.c

(limited to 'testhal/AVR/XMEGA/SERIAL/main.c')

diff --git a/testhal/AVR/XMEGA/SERIAL/main.c b/testhal/AVR/XMEGA/SERIAL/main.c
new file mode 100644
index 000000000..81f9bcfef
--- /dev/null
+++ b/testhal/AVR/XMEGA/SERIAL/main.c
@@ -0,0 +1,80 @@
+/*
+    ChibiOS - Copyright (C) 2016..2018 Theodore Ateba
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "chprintf.h"
+
+BaseSequentialStream *chp = (BaseSequentialStream *) &SD1;
+uint16_t cpt = 0; /* Counter for serial print.  */
+
+/**
+ * @brief   Blink thread.
+ */
+static THD_WORKING_AREA(waThread1, 32);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("Blinker");
+
+  while (true) {
+    palClearPad(IOPORT5, PORTE_LED);
+    chThdSleepMilliseconds(1000);
+    palSetPad(IOPORT5, PORTE_LED);
+    chThdSleepMilliseconds(100);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  palClearPad(IOPORT5, PORTE_LED);
+
+  /*
+   * Configure TX (PINC3) and RX (PIN2) for the USART1.
+   */
+  palSetPadMode(IOPORT3, PIN3, PAL_MODE_OUTPUT_PUSHPULL);
+  palSetPadMode(IOPORT3, PIN2, PAL_MODE_INPUT_PULLUP);
+
+  /*
+   * Start the Serial driver 1 by using the default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Starts the LED blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  while(TRUE) {
+    chprintf(chp, "Hello world %i.\r\n", cpt++);
+    chThdSleepMilliseconds(100);
+  }
+
+  return 0;
+}
-- 
cgit v1.2.3