From d3dd89159710e86296860de415f8314500ecbf97 Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Sat, 3 Apr 2010 15:22:57 +0000
Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@1842
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 os/hal/platforms/LPC111x/platform.dox | 76 +++++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 os/hal/platforms/LPC111x/platform.dox

(limited to 'os')

diff --git a/os/hal/platforms/LPC111x/platform.dox b/os/hal/platforms/LPC111x/platform.dox
new file mode 100644
index 000000000..11df786db
--- /dev/null
+++ b/os/hal/platforms/LPC111x/platform.dox
@@ -0,0 +1,76 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+    This file is part of ChibiOS/RT.
+
+    ChibiOS/RT is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS/RT is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @defgroup LPC111x LPC111x Support
+ * @brief LPC111x specific support.
+ * @details The LPC111x support includes:
+ * - I/O ports driver.
+ * - Buffered, interrupt driven, serial driver.
+ * - A demo supporting the kernel test suite.
+ * .
+ * @ingroup ARMCMx
+ */
+
+/**
+ * @defgroup LPC111x_HAL LPC111x HAL Support
+ * @brief HAL support.
+ *
+ * @ingroup LPC111x
+ */
+
+/**
+ * @defgroup LPC111x_PAL LPC111x I/O Ports Support
+ * @brief I/O Ports peripherals support.
+ * @details This module supports the LPC111x GPIO controller. The controller
+ * supports the following features (see @ref PAL):
+ * - 12 bits wide ports.
+ * - Atomic set/reset functions.
+ * - Atomic set+reset function (atomic bus operations).
+ * - Output latched regardless of the pad setting.
+ * - Direct read of input pads regardless of the pad setting.
+ * .
+ * <h2>Supported Setup Modes</h2>
+ * - @p PAL_MODE_RESET.
+ * - @p PAL_MODE_UNCONNECTED.
+ * - @p PAL_MODE_INPUT.
+ * - @p PAL_MODE_INPUT_ANALOG.
+ * - @p PAL_MODE_OUTPUT_PUSHPULL.
+ * .
+ * Any attempt to setup an invalid mode is ignored.
+ *
+ * <h2>Suboptimal Behavior</h2>
+ * Some GPIO features are less than optimal:
+ * - Pad/port toggling operations are not atomic.
+ * - Pull-up and Pull-down resistors cannot be programmed through the PAL
+ *   driver and must be programmed separately.
+ * - Reading of the output latch for pads programmed as input is not possible,
+ *   the input pin value is returned instead.
+ * .
+ * @ingroup LPC111x
+ */
+
+/**
+ * @defgroup LPC111x_SERIAL LPC111x UART Support
+ * @brief UART peripherals support.
+ * @details The serial driver supports the LPC111x UART taking advantage of
+ *          its deep hardware buffers.
+ *
+ * @ingroup LPC111x
+ */
-- 
cgit v1.2.3