From ebab92ee4fd1d1fd55dba260006bccef165d4c31 Mon Sep 17 00:00:00 2001 From: Giovanni Di Sirio Date: Wed, 16 Dec 2015 09:19:56 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@8608 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject | 62 ++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project | 106 ++++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile | 224 +++++++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h | 499 +++++++++++++++ ..._EVAL-FATFS-USB (OpenOCD, Flash and Run).launch | 52 ++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h | 230 +++++++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h | 368 +++++++++++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c | 694 +++++++++++++++++++++ .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h | 214 +++++++ .../readme.txt | 28 + 10 files changed, 2477 insertions(+) create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h create mode 100644 demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt (limited to 'demos') diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject new file mode 100644 index 000000000..01fe14bc5 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject @@ -0,0 +1,62 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project new file mode 100644 index 000000000..10fcc0bc1 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project @@ -0,0 +1,106 @@ + + + RT-STM32F103-STM3210E_EVAL-FATFS-USB + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j1 + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + org.eclipse.cdt.core.ccnature + + + + board + 2 + CHIBIOS/os/hal/boards/OLIMEX_STM32_E407 + + + fatfs + 2 + CHIBIOS/ext/fatfs + + + lwip + 2 + CHIBIOS/ext/lwip + + + os + 2 + CHIBIOS/os + + + test + 2 + CHIBIOS/test + + + diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile new file mode 100644 index 000000000..d14281a28 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile @@ -0,0 +1,224 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +# Startup files. +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM3210E_EVAL/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/various/lwip_bindings/lwip.mk +include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F103xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(FATFSSRC) \ + $(CHIBIOS)/os/various/evtimer.c \ + $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ + $(CHIBIOS)/os/hal/lib/streams/chprintf.c \ + $(CHIBIOS)/os/various/shell.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(FATFSINC) \ + $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h new file mode 100644 index 000000000..9c58ebe48 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h @@ -0,0 +1,499 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 2000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch new file mode 100644 index 000000000..049487f2b --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h new file mode 100644 index 000000000..2af5efead --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h @@ -0,0 +1,230 @@ +/* CHIBIOS FIX */ +#include "ch.h" + +/*---------------------------------------------------------------------------/ +/ FatFs - FAT file system module configuration file R0.10b (C)ChaN, 2014 +/---------------------------------------------------------------------------*/ + +#ifndef _FFCONF +#define _FFCONF 8051 /* Revision ID */ + + +/*---------------------------------------------------------------------------/ +/ Functions and Buffer Configurations +/---------------------------------------------------------------------------*/ + +#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ +/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each +/ file object. For file data transfer, FatFs uses the common sector buffer in +/ the file system object (FATFS) instead of private sector buffer eliminated +/ from the file object (FIL). */ + + +#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ +/* Setting _FS_READONLY to 1 defines read only configuration. This removes +/ writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(), +/ f_rename(), f_truncate() and useless f_getfree(). */ + + +#define _FS_MINIMIZE 0 /* 0 to 3 */ +/* The _FS_MINIMIZE option defines minimization level to remove API functions. +/ +/ 0: All basic functions are enabled. +/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(), +/ f_truncate() and f_rename() function are removed. +/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. +/ 3: f_lseek() function is removed in addition to 2. */ + + +#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ +/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ + + +#define _USE_MKFS 0 /* 0:Disable or 1:Enable */ +/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ + + +#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ +/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ + + +#define _USE_LABEL 0 /* 0:Disable or 1:Enable */ +/* To enable volume label functions, set _USE_LAVEL to 1 */ + + +#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ +/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ + + +/*---------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/---------------------------------------------------------------------------*/ + +#define _CODE_PAGE 1252 +/* The _CODE_PAGE specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows) +/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) +/ 949 - Korean (DBCS, OEM, Windows) +/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) +/ 1250 - Central Europe (Windows) +/ 1251 - Cyrillic (Windows) +/ 1252 - Latin 1 (Windows) +/ 1253 - Greek (Windows) +/ 1254 - Turkish (Windows) +/ 1255 - Hebrew (Windows) +/ 1256 - Arabic (Windows) +/ 1257 - Baltic (Windows) +/ 1258 - Vietnam (OEM, Windows) +/ 437 - U.S. (OEM) +/ 720 - Arabic (OEM) +/ 737 - Greek (OEM) +/ 775 - Baltic (OEM) +/ 850 - Multilingual Latin 1 (OEM) +/ 858 - Multilingual Latin 1 + Euro (OEM) +/ 852 - Latin 2 (OEM) +/ 855 - Cyrillic (OEM) +/ 866 - Russian (OEM) +/ 857 - Turkish (OEM) +/ 862 - Hebrew (OEM) +/ 874 - Thai (OEM, Windows) +/ 1 - ASCII (Valid for only non-LFN configuration) */ + + +#define _USE_LFN 3 /* 0 to 3 */ +#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ +/* The _USE_LFN option switches the LFN feature. +/ +/ 0: Disable LFN feature. _MAX_LFN has no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper() +/ function must be added to the project. +/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the +/ working buffer, take care on stack overflow. When use heap memory for the working +/ buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added +/ to the project. */ + + +#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ +/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN +/ feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O +/ functions. This option must be 0 when LFN feature is not enabled. */ + + +#define _STRF_ENCODE 3 /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */ +/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character +/ encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(), +/ f_puts and f_printf(). This option has no effect when Unicode API is not enabled. */ + + +#define _FS_RPATH 0 /* 0 to 2 */ +/* The _FS_RPATH option configures relative path feature. +/ +/ 0: Disable relative path feature and remove related functions. +/ 1: Enable relative path. f_chdrive() and f_chdir() function are available. +/ 2: f_getcwd() function is available in addition to 1. +/ +/ Note that output of the f_readdir() fnction is affected by this option. */ + + +/*---------------------------------------------------------------------------/ +/ Drive/Volume Configurations +/---------------------------------------------------------------------------*/ + +#define _VOLUMES 1 +/* Number of volumes (logical drives) to be used. */ + + +#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */ +#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" +/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive +/ number in the path name. _VOLUME_STRS defines the drive ID strings for each logical +/ drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID +/ strings are: 0-9 and A-Z. */ + + +#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Enable multiple partition */ +/* By default(0), each logical drive number is bound to the same physical drive number +/ and only a FAT volume found on the physical drive is mounted. When it is set to 1, +/ each logical drive number is bound to arbitrary drive/partition listed in VolToPart[]. +*/ + + +#define _MIN_SS 512 +#define _MAX_SS 512 +/* These options configure the range of sector size to be supported. (512, 1024, 2048 or +/ 4096) Always set both 512 for most systems, all memory card and harddisk. But a larger +/ value may be required for on-board flash memory and some type of optical media. +/ When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and +/ GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */ + + +#define _USE_ERASE 0 /* 0:Disable or 1:Enable */ +/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command +/ should be added to the disk_ioctl() function. */ + + +#define _FS_NOFSINFO 0 /* 0 to 3 */ +/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option +/ and f_getfree() function at first time after volume mount will force a full FAT scan. +/ Bit 1 controls the last allocated cluster number as bit 0. +/ +/ bit0=0: Use free cluster count in the FSINFO if available. +/ bit0=1: Do not trust free cluster count in the FSINFO. +/ bit1=0: Use last allocated cluster number in the FSINFO if available. +/ bit1=1: Do not trust last allocated cluster number in the FSINFO. +*/ + + + +/*---------------------------------------------------------------------------/ +/ System Configurations +/---------------------------------------------------------------------------*/ + +#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */ +/* To enable file lock control feature, set _FS_LOCK to non-zero value. +/ The value defines how many files/sub-directories can be opened simultaneously +/ with file lock control. This feature uses bss _FS_LOCK * 12 bytes. */ + + +#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ +#define _FS_TIMEOUT MS2ST(1000) /* Timeout period in unit of time tick */ +#define _SYNC_t semaphore_t* /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */ +/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module. +/ +/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. +/ 1: Enable re-entrancy. Also user provided synchronization handlers, +/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() +/ function must be added to the project. +*/ + + +#define _WORD_ACCESS 0 /* 0 or 1 */ +/* The _WORD_ACCESS option is an only platform dependent option. It defines +/ which access method is used to the word data on the FAT volume. +/ +/ 0: Byte-by-byte access. Always compatible with all platforms. +/ 1: Word access. Do not choose this unless under both the following conditions. +/ +/ * Address misaligned memory access is always allowed for ALL instructions. +/ * Byte order on the memory is little-endian. +/ +/ If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and +/ reduce code size. Following table shows an example of some processor types. +/ +/ ARM7TDMI 0 ColdFire 0 V850E2 0 +/ Cortex-M3 0 Z80 0/1 V850ES 0/1 +/ Cortex-M0 0 RX600(LE) 0/1 TLCS-870 0/1 +/ AVR 0/1 RX600(BE) 0 TLCS-900 0/1 +/ AVR32 0 RL78 0 R32C 0 +/ PIC18 0/1 SH-2 0 M16C 0/1 +/ PIC24 0 H8S 0 MSP430 0 +/ PIC32 0 H8/300H 0 x86 0/1 +*/ + + +#endif /* _FFCONF */ diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h new file mode 100644 index 000000000..d82305228 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h @@ -0,0 +1,368 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC TRUE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c new file mode 100644 index 000000000..db7749bb0 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c @@ -0,0 +1,694 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "chprintf.h" +#include "shell.h" + +#include "lwipthread.h" +#include "web/web.h" + +#include "ff.h" + +/*===========================================================================*/ +/* Card insertion monitor. */ +/*===========================================================================*/ + +#define POLLING_INTERVAL 10 +#define POLLING_DELAY 10 + +/** + * @brief Card monitor timer. + */ +static virtual_timer_t tmr; + +/** + * @brief Debounce counter. + */ +static unsigned cnt; + +/** + * @brief Card event sources. + */ +static event_source_t inserted_event, removed_event; + +/** + * @brief Insertion monitor timer callback function. + * + * @param[in] p pointer to the @p BaseBlockDevice object + * + * @notapi + */ +static void tmrfunc(void *p) { + BaseBlockDevice *bbdp = p; + + chSysLockFromISR(); + if (cnt > 0) { + if (blkIsInserted(bbdp)) { + if (--cnt == 0) { + chEvtBroadcastI(&inserted_event); + } + } + else + cnt = POLLING_INTERVAL; + } + else { + if (!blkIsInserted(bbdp)) { + cnt = POLLING_INTERVAL; + chEvtBroadcastI(&removed_event); + } + } + chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp); + chSysUnlockFromISR(); +} + +/** + * @brief Polling monitor start. + * + * @param[in] p pointer to an object implementing @p BaseBlockDevice + * + * @notapi + */ +static void tmr_init(void *p) { + + chEvtObjectInit(&inserted_event); + chEvtObjectInit(&removed_event); + chSysLock(); + cnt = POLLING_INTERVAL; + chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p); + chSysUnlock(); +} + +/*===========================================================================*/ +/* FatFs related. */ +/*===========================================================================*/ + +/** + * @brief FS object. + */ +static FATFS SDC_FS; + +/* FS mounted and ready.*/ +static bool fs_ready = FALSE; + +/* Generic large buffer.*/ +static uint8_t fbuff[1024]; + +static FRESULT scan_files(BaseSequentialStream *chp, char *path) { + FRESULT res; + FILINFO fno; + DIR dir; + int i; + char *fn; + +#if _USE_LFN + fno.lfname = 0; + fno.lfsize = 0; +#endif + res = f_opendir(&dir, path); + if (res == FR_OK) { + i = strlen(path); + for (;;) { + res = f_readdir(&dir, &fno); + if (res != FR_OK || fno.fname[0] == 0) + break; + if (fno.fname[0] == '.') + continue; + fn = fno.fname; + if (fno.fattrib & AM_DIR) { + path[i++] = '/'; + strcpy(&path[i], fn); + res = scan_files(chp, path); + if (res != FR_OK) + break; + path[--i] = 0; + } + else { + chprintf(chp, "%s/%s\r\n", path, fn); + } + } + } + return res; +} + +/*===========================================================================*/ +/* USB related stuff. */ +/*===========================================================================*/ + +/* + * Endpoints to be used for USBD2. + */ +#define USBD2_DATA_REQUEST_EP 1 +#define USBD2_DATA_AVAILABLE_EP 1 +#define USBD2_INTERRUPT_REQUEST_EP 2 + +/* + * Serial over USB Driver structure. + */ +static SerialUSBDriver SDU2; + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(38), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(56), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, + 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, + 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, + 'o', 0, 'r', 0, 't', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU2); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + chSysLockFromISR(); + + /* Disconnection event on suspend.*/ + sduDisconnectI(&SDU2); + + chSysUnlockFromISR(); + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD2, + USBD2_DATA_REQUEST_EP, + USBD2_DATA_AVAILABLE_EP, + USBD2_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) +#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {CH_STATE_NAMES}; + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state time\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state]); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_tree(BaseSequentialStream *chp, int argc, char *argv[]) { + FRESULT err; + uint32_t clusters; + FATFS *fsp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: tree\r\n"); + return; + } + if (!fs_ready) { + chprintf(chp, "File System not mounted\r\n"); + return; + } + err = f_getfree("/", &clusters, &fsp); + if (err != FR_OK) { + chprintf(chp, "FS: f_getfree() failed\r\n"); + return; + } + chprintf(chp, + "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n", + clusters, (uint32_t)SDC_FS.csize, + clusters * (uint32_t)SDC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE); + fbuff[0] = 0; + scan_files(chp, (char *)fbuff); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"tree", cmd_tree}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU2, + commands +}; + +/*===========================================================================*/ +/* Main and generic code. */ +/*===========================================================================*/ + +/* + * Card insertion event. + */ +static void InsertHandler(eventid_t id) { + FRESULT err; + + (void)id; + /* + * On insertion SDC initialization and FS mount. + */ + if (sdcConnect(&SDCD1)) + return; + + err = f_mount(&SDC_FS, "/", 1); + if (err != FR_OK) { + sdcDisconnect(&SDCD1); + return; + } + fs_ready = TRUE; +} + +/* + * Card removal event. + */ +static void RemoveHandler(eventid_t id) { + + (void)id; + sdcDisconnect(&SDCD1); + fs_ready = FALSE; +} + +/* + * Green LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (true) { + palTogglePad(GPIOC, GPIOC_LED); + chThdSleepMilliseconds(fs_ready ? 125 : 500); + } +} + +/* + * Application entry point. + */ +int main(void) { + static thread_t *shelltp = NULL; + static const evhandler_t evhndl[] = { + InsertHandler, + RemoveHandler + }; + event_listener_t el0, el1; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + * - lwIP subsystem initialization using the default configuration. + */ + halInit(); + chSysInit(); + lwipInit(NULL); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU2); + sduStart(&SDU2, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Activates the serial driver 6 and SDC driver 1 using default + * configuration. + */ + sdStart(&SD6, NULL); + sdcStart(&SDCD1, NULL); + + /* + * Activates the card insertion monitor. + */ + tmr_init(&SDCD1); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Creates the HTTP thread (it changes priority internally). + */ + chThdCreateStatic(wa_http_server, sizeof(wa_http_server), NORMALPRIO + 1, + http_server, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and listen for events. + */ + chEvtRegister(&inserted_event, &el0, 0); + chEvtRegister(&removed_event, &el1, 1); + while (true) { + if (!shelltp && (SDU2.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminatedX(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + if (palReadPad(GPIOA, GPIOA_BUTTON_WKUP) != 0) { + } + chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500))); + } +} diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h new file mode 100644 index 000000000..47918a688 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h @@ -0,0 +1,214 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* _MCUCONF_H_ */ diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt new file mode 100644 index 000000000..4561b8738 --- /dev/null +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt @@ -0,0 +1,28 @@ +***************************************************************************** +** ChibiOS/RT port for ARM-Cortex-M4 STM32F103. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-E407 board. + +** The Demo ** + +FatFs integrated using SDIO. +The USB-FS port is used as USB-CDC and a command shell is ready to accepts +commands there. + +** Build Procedure ** + +The demo has been tested by using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com -- cgit v1.2.3