From e8bbaf0cbaf3213f17eba846b9beac9741e16ba4 Mon Sep 17 00:00:00 2001 From: gdisirio Date: Sun, 20 Sep 2009 16:17:37 +0000 Subject: lwIP related work. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@1173 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/ARM7-AT91SAM7X-LWIP-GCC/Makefile | 191 +++ demos/ARM7-AT91SAM7X-LWIP-GCC/board.c | 180 ++ demos/ARM7-AT91SAM7X-LWIP-GCC/board.h | 78 + demos/ARM7-AT91SAM7X-LWIP-GCC/ch.ld | 98 ++ demos/ARM7-AT91SAM7X-LWIP-GCC/chconf.h | 379 ++++ demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/cc.h | 73 + demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/perf.h | 59 + demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.c | 159 ++ demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.h | 91 + demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/lwip.mk | 44 + .../lwip/netif/ethernetif.c | 333 ++++ demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h | 1801 ++++++++++++++++++++ demos/ARM7-AT91SAM7X-LWIP-GCC/main.c | 67 + demos/ARM7-AT91SAM7X-LWIP-GCC/readme.txt | 28 + 14 files changed, 3581 insertions(+) create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/Makefile create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/board.c create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/board.h create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/ch.ld create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/chconf.h create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/cc.h create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/perf.h create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.c create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.h create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/lwip.mk create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/netif/ethernetif.c create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/main.c create mode 100644 demos/ARM7-AT91SAM7X-LWIP-GCC/readme.txt diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/Makefile b/demos/ARM7-AT91SAM7X-LWIP-GCC/Makefile new file mode 100644 index 000000000..7388fd754 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/Makefile @@ -0,0 +1,191 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -mabi=apcs-gnu +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = no +endif + +# Enable register caching optimization (read documentation). +ifeq ($(USE_CURRP_CACHING),) + USE_CURRP_CACHING = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Define linker script file here +LDSCRIPT= ch.ld + +# Imported source files +CHIBIOS = ../.. +include ${CHIBIOS}/os/ports/GCC/ARM7/port.mk +include ${CHIBIOS}/os/kernel/kernel.mk +include ${CHIBIOS}/test/test.mk +include ./lwip/lwip.mk + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = ${PORTSRC} \ + ${KERNSRC} \ + ${TESTSRC} \ + ${CHIBIOS}/os/io/pal.c \ + ${CHIBIOS}/os/io/serial.c \ + ${CHIBIOS}/os/io/platforms/AT91SAM7X/pal_lld.c \ + ${CHIBIOS}/os/io/platforms/AT91SAM7X/serial_lld.c \ + ${CHIBIOS}/os/io/platforms/AT91SAM7X/at91lib/aic.c \ + ${LWNETIFSRC} \ + ${LWCORESRC} \ + ${LWIPV4SRC} \ + ${LWAPISRC} \ + ./lwip/arch/sys_arch.c \ + ./lwip/netif/ethernetif.c \ + board.c main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) \ + ${CHIBIOS}/os/ports/GCC/ARM7/AT91SAM7X/vectors.s + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) $(LWINC) \ + ${CHIBIOS}/os/io \ + ${CHIBIOS}/os/io/platforms/AT91SAM7X \ + ${CHIBIOS}/os/various \ + ${CHIBIOS}/os/ports/GCC/ARM7/AT91SAM7X \ + ./lwip + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = arm7tdmi + +TRGT = arm-elf- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of default section +# + +# List all default C defines here, like -D_DEBUG=1 +DDEFS = -DLWIP_PROVIDE_ERRNO + +# List all default ASM defines here, like -D_DEBUG=1 +DADEFS = + +# List all default directories to look for include files here +DINCDIR = + +# List the default directory to look for the libraries here +DLIBDIR = + +# List all default libraries here +DLIBS = + +# +# End of default section +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +include ${CHIBIOS}/os/ports/GCC/ARM/rules.mk diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/board.c b/demos/ARM7-AT91SAM7X-LWIP-GCC/board.c new file mode 100644 index 000000000..31e362845 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/board.c @@ -0,0 +1,180 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include + +#include "board.h" +#include "at91lib/aic.h" + +/* + * FIQ Handler weak symbol defined in vectors.s. + */ +void FiqHandler(void); + +static CH_IRQ_HANDLER(SpuriousHandler) { + + CH_IRQ_PROLOGUE(); + + AT91C_BASE_AIC->AIC_EOICR = 0; + + CH_IRQ_EPILOGUE(); +} + +/* + * SYS IRQ handling here. + */ +static CH_IRQ_HANDLER(SYSIrqHandler) { + + CH_IRQ_PROLOGUE(); + + if (AT91C_BASE_PITC->PITC_PISR & AT91C_PITC_PITS) { + (void) AT91C_BASE_PITC->PITC_PIVR; + chSysLockFromIsr(); + chSysTimerHandlerI(); + chSysUnlockFromIsr(); + } + AT91C_BASE_AIC->AIC_EOICR = 0; + + CH_IRQ_EPILOGUE(); +} + +/* + * Digital I/O ports static configuration as defined in @p board.h. + */ +static const AT91SAM7XPIOConfig config = +{ + {VAL_PIOA_ODSR, VAL_PIOA_OSR, VAL_PIOA_PUSR}, + {VAL_PIOB_ODSR, VAL_PIOB_OSR, VAL_PIOB_PUSR} +}; + +/* + * Early initialization code. + * This initialization is performed just after reset before BSS and DATA + * segments initialization. + */ +void hwinit0(void) { + /* + * Flash Memory: 1 wait state, about 50 cycles in a microsecond. + */ + AT91C_BASE_MC->MC_FMR = (AT91C_MC_FMCN & (50 << 16)) | AT91C_MC_FWS_1FWS; + + /* + * Watchdog disabled. + */ + AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS; + + /* + * Enables the main oscillator and waits 56 slow cycles as startup time. + */ + AT91C_BASE_PMC->PMC_MOR = (AT91C_CKGR_OSCOUNT & (7 << 8)) | AT91C_CKGR_MOSCEN; + while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS)) + ; + + /* + * PLL setup: DIV = 14, MUL = 72, PLLCOUNT = 10 + * PLLfreq = 96109714 Hz (rounded) + */ + AT91C_BASE_PMC->PMC_PLLR = (AT91C_CKGR_DIV & 14) | + (AT91C_CKGR_PLLCOUNT & (10 << 8)) | + (AT91C_CKGR_MUL & (72 << 16)); + while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK)) + ; + + /* + * Master clock = PLLfreq / 2 = 48054858 Hz (rounded) + */ + AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | AT91C_PMC_PRES_CLK_2; + while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY)) + ; + + /* + * PIO initialization. + */ + palInit(&config); +} + +/* + * Late initialization code. + * This initialization is performed after BSS and DATA segments initialization + * and before invoking the main() function. + */ +void hwinit1(void) { + int i; + + /* + * Default AIC setup, the device drivers will modify it as needed. + */ + AT91C_BASE_AIC->AIC_ICCR = 0xFFFFFFFF; + AT91C_BASE_AIC->AIC_SVR[0] = (AT91_REG)FiqHandler; + for (i = 1; i < 31; i++) { + AT91C_BASE_AIC->AIC_SVR[i] = (AT91_REG)NULL; + AT91C_BASE_AIC->AIC_EOICR = (AT91_REG)i; + } + AT91C_BASE_AIC->AIC_SPU = (AT91_REG)SpuriousHandler; + + /* + * LCD pins setup. + */ + palClearPad(IOPORT2, PIOB_LCD_BL); + palSetPadMode(IOPORT2, PIOB_LCD_BL, PAL_MODE_OUTPUT_PUSHPULL); + + palSetPad(IOPORT1, PIOA_LCD_RESET); + palSetPadMode(IOPORT1, PIOA_LCD_RESET, PAL_MODE_OUTPUT_PUSHPULL); + + /* + * Joystick and buttons setup. + */ + palSetGroupMode(IOPORT1, + PIOA_B1_MASK | PIOA_B2_MASK | PIOA_B3_MASK | + PIOA_B4_MASK | PIOA_B5_MASK, + PAL_MODE_INPUT); + palSetGroupMode(IOPORT2, PIOB_SW1_MASK | PIOB_SW2_MASK, PAL_MODE_INPUT); + + /* + * MMC/SD slot setup. + */ + palSetGroupMode(IOPORT2, + PIOB_MMC_WP_MASK | PIOB_MMC_CP_MASK, + PAL_MODE_INPUT); + + /* + * PIT Initialization. + */ + AIC_ConfigureIT(AT91C_ID_SYS, + AT91C_AIC_SRCTYPE_HIGH_LEVEL | (AT91C_AIC_PRIOR_HIGHEST - 1), + SYSIrqHandler); + AIC_EnableIT(AT91C_ID_SYS); + AT91C_BASE_PITC->PITC_PIMR = (MCK / 16 / CH_FREQUENCY) - 1; + AT91C_BASE_PITC->PITC_PIMR |= AT91C_PITC_PITEN | AT91C_PITC_PITIEN; + + /* + * Serial driver initialization, RTS/CTS pins enabled for USART0 only. + */ + sdInit(); + AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_RTS0 | AT91C_PA4_CTS0; + AT91C_BASE_PIOA->PIO_ASR = AT91C_PIO_PA3 | AT91C_PIO_PA4; + AT91C_BASE_PIOA->PIO_PPUDR = AT91C_PIO_PA3 | AT91C_PIO_PA4; + + /* + * ChibiOS/RT initialization. + */ + chSysInit(); +} diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/board.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/board.h new file mode 100644 index 000000000..c56f50258 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/board.h @@ -0,0 +1,78 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#include "at91lib/AT91SAM7X256.h" + +#define BOARD_OLIMEX_SAM7_EX256 + +#define CLK 18432000 +#define MCK 48054857 + +/* + * Initial I/O setup. + */ +#define VAL_PIOA_ODSR 0x00000000 /* Output data. */ +#define VAL_PIOA_OSR 0x00000000 /* Direction. */ +#define VAL_PIOA_PUSR 0xFFFFFFFF /* Pull-up. */ + +#define VAL_PIOB_ODSR 0x00000000 /* Output data. */ +#define VAL_PIOB_OSR 0x00000000 /* Direction. */ +#define VAL_PIOB_PUSR 0xFFFFFFFF /* Pull-up. */ + +/* + * I/O definitions. + */ +#define PIOA_LCD_RESET 2 +#define PIOA_LCD_RESET_MASK (1 << PIOA_LCD_RESET) +#define PIOA_B1 7 +#define PIOA_B1_MASK (1 << PIOA_B1) +#define PIOA_B2 8 +#define PIOA_B2_MASK (1 << PIOA_B2) +#define PIOA_B3 9 +#define PIOA_B3_MASK (1 << PIOA_B3) +#define PIOA_B4 14 +#define PIOA_B4_MASK (1 << PIOA_B4) +#define PIOA_B5 15 +#define PIOA_B5_MASK (1 << PIOA_B5) +#define PIOA_USB_PUP 25 +#define PIOA_USB_PUP_MASK (1 << PIOA_USB_PUP) +#define PIOA_USB_PR 26 +#define PIOA_USB_PR_MASK (1 << PIOA_USB_PR) + +#define PIOB_PHY_PD 18 +#define PIOB_PHY_PD_MASK (1 << PIOB_PHY_PD) +#define PIOB_AUDIO_OUT 19 +#define PIOB_AUDIO_OUT_MASK (1 << PIOB_AUDIO_OUT) +#define PIOB_LCD_BL 20 +#define PIOB_LCD_BL_MASK (1 << PIOB_LCD_BL) +#define PIOB_MMC_WP 22 +#define PIOB_MMC_WP_MASK (1 << PIOB_MMC_WP) +#define PIOB_MMC_CP 23 +#define PIOB_MMC_CP_MASK (1 << PIOB_MMC_CP) +#define PIOB_SW1 24 +#define PIOB_SW1_MASK (1 << PIOB_SW1) +#define PIOB_SW2 25 +#define PIOB_SW2_MASK (1 << PIOB_SW2) +#define PIOB_PHY_IRQ 26 +#define PIOB_PHY_IRQ_MASK (1 << PIOB_PHY_IRQ) + +#endif /* _BOARD_H_ */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/ch.ld b/demos/ARM7-AT91SAM7X-LWIP-GCC/ch.ld new file mode 100644 index 000000000..944a7f29d --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/ch.ld @@ -0,0 +1,98 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * AT91SAM7X256 memory setup. + */ +__und_stack_size__ = 0x0004; +__abt_stack_size__ = 0x0004; +__fiq_stack_size__ = 0x0010; +__irq_stack_size__ = 0x0080; +__svc_stack_size__ = 0x0004; +__sys_stack_size__ = 0x0400; +__stacks_total_size__ = __und_stack_size__ + __abt_stack_size__ + __fiq_stack_size__ + __irq_stack_size__ + __svc_stack_size__ + __sys_stack_size__; + +MEMORY +{ + flash : org = 0x100000, len = 256k + ram : org = 0x200020, len = 64k - 0x20 +} + +__ram_start__ = ORIGIN(ram); +__ram_size__ = LENGTH(ram); +__ram_end__ = __ram_start__ + __ram_size__; + +SECTIONS +{ + . = 0; + + .text : ALIGN(16) SUBALIGN(16) + { + _text = .; + KEEP(*(vectors)) + *(.text) + *(.text.*); + *(.rodata); + *(.rodata.*); + *(.glue_7t); + *(.glue_7); + *(.gcc*); + *(.ctors); + *(.dtors); + . = ALIGN(4); + _etext = .; + } > flash + + _textdata = _etext; + + .data : + { + _data = .; + *(.data) + . = ALIGN(4); + *(.data.*) + . = ALIGN(4); + *(.ramtext) + . = ALIGN(4); + _edata = .; + } > ram AT > flash + + .bss : + { + _bss_start = .; + *(.bss) + . = ALIGN(4); + *(.bss.*) + . = ALIGN(4); + *(COMMON) + . = ALIGN(4); + _bss_end = .; + } > ram + + /DISCARD/ : + { + *(.eh_*) + } +} + +PROVIDE(end = .); +_end = .; + +__heap_base__ = _end; +__heap_end__ = __ram_end__ - __stacks_total_size__; diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/chconf.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/chconf.h new file mode 100644 index 000000000..21ad75bde --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/chconf.h @@ -0,0 +1,379 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file src/templates/chconf.h + * @brief Configuration file template. + * @addtogroup Config + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/* Kernel parameters. */ +/*===========================================================================*/ + +/** + * Frequency of the system timer that drives the system ticks. This also + * defines the system tick time unit. + */ +#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) +#define CH_FREQUENCY 1000 +#endif + +/** + * This constant is the number of system ticks allowed for the threads before + * preemption occurs. This option is only meaningful if the option + * @p CH_USE_ROUNDROBIN is also active. + */ +#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) +#define CH_TIME_QUANTUM 20 +#endif + +/** + * If enabled then the use of nested @p chSysLock() / @p chSysUnlock() + * operations is allowed.
+ * For performance and code size reasons the recommended setting is to leave + * this option disabled.
+ * You can use this option if you need to merge ChibiOS/RT with external + * libraries that require nested lock/unlock operations. + * @note The default is @p FALSE. + */ +#if !defined(CH_USE_NESTED_LOCKS) || defined(__DOXYGEN__) +#define CH_USE_NESTED_LOCKS FALSE +#endif + +/** + * If specified then the kernel performs the round robin scheduling algorithm + * on threads of equal priority. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_ROUNDROBIN) || defined(__DOXYGEN__) +#define CH_USE_ROUNDROBIN TRUE +#endif + +/** + * Number of RAM bytes to use as system heap. If set to zero then the whole + * available RAM is used as system heap. + * @note In order to use the whole RAM as system heap the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_USE_HEAP. + */ +#if !defined(CH_HEAP_SIZE) || defined(__DOXYGEN__) +#define CH_HEAP_SIZE 0 +#endif + +/*===========================================================================*/ +/* Performance options. */ +/*===========================================================================*/ + +/** + * If specified then time efficient rather than space efficient code is used + * when two possible implementations exist. + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) +#define CH_OPTIMIZE_SPEED TRUE +#endif + +/** + * If enabled defines a CPU register to be used as storage for the global + * @p currp variable. Caching this variable in a register can greatly + * improve both space and time efficiency of the generated code. Another side + * effect is that one less register has to be saved during the context switch + * resulting in lower RAM usage and faster code. + * @note This option is only usable with the GCC compiler and is only useful + * on processors with many registers like ARM cores. + * @note If this option is enabled then ALL the libraries linked to the + * ChibiOS/RT code must be recompiled with the GCC option @p + * -ffixed-@. + * @note This option must be enabled in the Makefile, it is listed here for + * documentation. + */ +#if defined(__DOXYGEN__) +#define CH_CURRP_REGISTER_CACHE "reg" +#endif + +/*===========================================================================*/ +/* Subsystem options. */ +/*===========================================================================*/ + +/** + * If specified then the @p chThdWait() function is included in the kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) +#define CH_USE_WAITEXIT TRUE +#endif + +/** + * If specified then the Semaphores APIs are included in the kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES TRUE +#endif + +/** + * If enabled then the threads are enqueued on semaphores by priority rather + * than FIFO order. + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * If specified then the Semaphores the @p chSemWaitSignal() API is included + * in the kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) +#define CH_USE_SEMSW TRUE +#endif + +/** + * If specified then the Mutexes APIs are included in the kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) +#define CH_USE_MUTEXES TRUE +#endif + +/** + * If specified then the Conditional Variables APIs are included in the kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MUTEXES. + */ +#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS TRUE +#endif + +/** + * If specified then the Conditional Variables APIs are included in the kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_CONDVARS. + */ +#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * If specified then the Event flags APIs are included in the kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) +#define CH_USE_EVENTS TRUE +#endif + +/** + * If specified then the @p chEvtWaitXXXTimeout() functions are included in + * the kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_EVENTS. + */ +#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * If specified then the Synchronous Messages APIs are included in the kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES TRUE +#endif + +/** + * If enabled then messages are served by priority rather than in FIFO order. + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_MESSAGES. + */ +#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * If specified then the Asynchronous Messages (Mailboxes) APIs are included + * in the kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) +#define CH_USE_MAILBOXES TRUE +#endif + +/** + * If specified then the I/O queues APIs are included in the kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) +#define CH_USE_QUEUES TRUE +#endif + +/** + * If specified then the memory heap allocator APIs are included in the kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MUTEXES or @p CH_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) +#define CH_USE_HEAP TRUE +#endif + +/** + * If enabled enforces the use of the C-runtime @p malloc() and @p free() + * functions as backend for the system heap allocator. + * @note The default is @p FALSE. + * @note Requires @p CH_USE_HEAP. + */ +#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) +#define CH_USE_MALLOC_HEAP FALSE +#endif + +/** + * If specified then the memory pools allocator APIs are included in the + * kernel. + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) +#define CH_USE_MEMPOOLS TRUE +#endif + +/** + * If specified then the dynamic threads creation APIs are included in the + * kernel. + * @note The default is @p TRUE. + * @note Requires @p CH_USE_WAITEXIT. + */ +#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) +#define CH_USE_DYNAMIC TRUE +#endif + +/*===========================================================================*/ +/* Debug options. */ +/*===========================================================================*/ + +/** + * Debug option, if enabled then the checks on the API functions input + * parameters are activated. + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * Debug option, if enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, runtime + * anomalies and port-defined checks. + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * Debug option, if enabled the context switch circular trace buffer is + * activated. + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_TRACE FALSE +#endif + +/** + * Debug option, if enabled a runtime stack check is performed. + * @note The stack check is performed in a architecture/port dependent way. It + * may not be implemented at all. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * Debug option, if enabled the threads working area is filled with a byte + * pattern when a thread is created. + */ +#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * Debug option, if enabled a field is added to the @p Thread structure that + * counts the system ticks occurred while executing the thread. + */ +#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) +#define CH_DBG_THREADS_PROFILING TRUE +#endif + +/*===========================================================================*/ +/* Kernel hooks. */ +/*===========================================================================*/ + +/** + * User fields added to the end of the @p Thread structure. + */ +#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) +#define THREAD_EXT_FIELDS \ +struct { \ + /* Add thread custom fields here.*/ \ + void *p_timeouts; \ +}; +#endif + +/** + * User initialization code added to the @p chThdInit() API. + * @note It is invoked from within @p chThdInit(). + */ +#if !defined(THREAD_EXT_INIT) || defined(__DOXYGEN__) +#define THREAD_EXT_INIT(tp) { \ + /* Add thread initialization code here.*/ \ + currp->p_timeouts = NULL; \ +} +#endif + +/** + * User finalization code added to the @p chThdExit() API. + * @note It is inserted into lock zone. + */ +#if !defined(THREAD_EXT_EXIT) || defined(__DOXYGEN__) +#define THREAD_EXT_EXIT(tp) { \ + /* Add thread finalization code here.*/ \ +} +#endif + +/** + * Code inserted inside the idle thread loop immediately after an interrupt + * resumed execution. + */ +#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) +#define IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} +#endif + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/cc.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/cc.h new file mode 100644 index 000000000..f8e120315 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/cc.h @@ -0,0 +1,73 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ +/* + **** This file incorporates work covered by the following copyright and **** + **** permission notice: **** + + Copyright (c) 2001-2004 Swedish Institute of Computer Science. + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + OF SUCH DAMAGE. + + This file is part of the lwIP TCP/IP stack. + + Author: Adam Dunkels +*/ + +#ifndef __CC_H__ +#define __CC_H__ + +#include + +typedef uint8_t u8_t; +typedef int8_t s8_t; +typedef uint16_t u16_t; +typedef int16_t s16_t; +typedef uint32_t u32_t; +typedef int32_t s32_t; +typedef uint32_t mem_ptr_t; + +#define LWIP_PLATFORM_DIAG(x) +#define LWIP_PLATFORM_ASSERT(x) { \ + chSysHalt(); \ +} + +#define BYTE_ORDER LITTLE_ENDIAN + +#endif /* __CC_H__ */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/perf.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/perf.h new file mode 100644 index 000000000..c6f1d1a90 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/perf.h @@ -0,0 +1,59 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ +/* + **** This file incorporates work covered by the following copyright and **** + **** permission notice: **** + + Copyright (c) 2001-2004 Swedish Institute of Computer Science. + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + OF SUCH DAMAGE. + + This file is part of the lwIP TCP/IP stack. + + Author: Adam Dunkels +*/ + +#ifndef __PERF_H__ +#define __PERF_H__ + +#define PERF_START +#define PERF_STOP(x) + +#endif /* __PERF_H__ */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.c b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.c new file mode 100644 index 000000000..8248eed72 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.c @@ -0,0 +1,159 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ +/* + **** This file incorporates work covered by the following copyright and **** + **** permission notice: **** + + Copyright (c) 2001-2004 Swedish Institute of Computer Science. + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + OF SUCH DAMAGE. + + This file is part of the lwIP TCP/IP stack. + + Author: Adam Dunkels +*/ + +#include + +#include "lwip/opt.h" +#include "lwip/mem.h" +#include "lwip/sys.h" + +#include "arch/cc.h" +#include "arch/sys_arch.h" + +static unsigned cnt; + +void sys_init(void) { + + cnt = 0; +} + +sys_sem_t sys_sem_new(u8_t count) { + + sys_sem_t sem = mem_malloc(sizeof(Semaphore)); + chSemInit(sem, (cnt_t)count); + return sem; +} + +void sys_sem_free(sys_sem_t sem) { + + mem_free(sem); +} + +void sys_sem_signal(sys_sem_t sem) { + + chSemSignal(sem); +} + +u32_t sys_arch_sem_wait(sys_sem_t sem, u32_t timeout) { + systime_t time; + + chSysLock(); + time = chTimeNow(); + chSemWaitTimeoutS(sem, (systime_t)timeout); + time = chTimeNow() - time; + chSysUnlock(); + return time; +} + +sys_mbox_t sys_mbox_new(int size) { + sys_mbox_t mbox; + + mbox = mem_malloc(sizeof(Mailbox) + sizeof(msg_t) * size); + chMBInit(mbox, (void *)(mbox + 1), size); + return mbox; +} + +void sys_mbox_free(sys_mbox_t mbox) { + + mem_free(mbox); +} + +void sys_mbox_post(sys_mbox_t mbox, void *msg) { + + chMBPost(mbox, (msg_t)msg, TIME_INFINITE); +} + +err_t sys_mbox_trypost(sys_mbox_t mbox, void *msg) { + + if (chMBPost(mbox, (msg_t)msg, TIME_IMMEDIATE) == RDY_TIMEOUT) + return ERR_MEM; + return ERR_OK; +} + +u32_t sys_arch_mbox_fetch(sys_mbox_t mbox, void **msg, u32_t timeout) { + + if (chMBFetchS(mbox, (msg_t *)msg, (systime_t)timeout) == RDY_TIMEOUT) + return ERR_MEM; + return ERR_OK; +} + +u32_t sys_arch_mbox_tryfetch(sys_mbox_t mbox, void **msg) { + + if (chMBFetchS(mbox, (msg_t *)msg, TIME_IMMEDIATE) == RDY_TIMEOUT) + return ERR_MEM; + return ERR_OK; +} + +struct sys_timeouts *sys_arch_timeouts(void) { + + return (struct sys_timeouts *)&currp->p_timeouts; +} + +sys_thread_t sys_thread_new(char *name, void (* thread)(void *arg), + void *arg, int stacksize, int prio) { + size_t wsz = THD_WA_SIZE(stacksize); + void *wsp = mem_malloc(wsz); + if (wsp == NULL) + return NULL; + return (sys_thread_t)chThdCreateStatic(wsp, wsz, prio, (tfunc_t)thread, arg); +} + +sys_prot_t sys_arch_protect(void) { + + chSysLock(); + return 0; +} + +void sys_arch_unprotect(sys_prot_t pval) { + + chSysUnlock(); +} diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.h new file mode 100644 index 000000000..6dd834506 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/arch/sys_arch.h @@ -0,0 +1,91 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ +/* + **** This file incorporates work covered by the following copyright and **** + **** permission notice: **** + + Copyright (c) 2001-2004 Swedish Institute of Computer Science. + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + OF SUCH DAMAGE. + + This file is part of the lwIP TCP/IP stack. + + Author: Adam Dunkels +*/ + +#include + +#ifndef __SYS_ARCH_H__ +#define __SYS_ARCH_H__ + +typedef Semaphore * sys_sem_t; +typedef void * sys_mbox_t; +typedef Thread * sys_thread_t; +typedef int sys_prot_t; + +#define SYS_MBOX_NULL (void *)0 +#define SYS_THREAD_NULL (Thread *)0 +#define SYS_SEM_NULL (Semaphore *)0 + +void sys_init(void); +sys_sem_t sys_sem_new(u8_t count); +void sys_sem_free(sys_sem_t sem); +void sys_sem_signal(sys_sem_t sem); +u32_t sys_arch_sem_wait(sys_sem_t sem, u32_t timeout); + +sys_mbox_t sys_mbox_new(int size); +void sys_mbox_free(sys_mbox_t mbox); +void sys_mbox_post(sys_mbox_t mbox, void *msg); +err_t sys_mbox_trypost(sys_mbox_t mbox, void *msg); +u32_t sys_arch_mbox_fetch(sys_mbox_t mbox, void **msg, u32_t timeout); +u32_t sys_arch_mbox_tryfetch(sys_mbox_t mbox, void **msg); + +struct sys_timeouts *sys_arch_timeouts(void); + +sys_thread_t sys_thread_new(char *name, + void (* thread)(void *arg), + void *arg, + int stacksize, + int prio); + +sys_prot_t sys_arch_protect(void); +void sys_arch_unprotect(sys_prot_t pval); + +#endif /* __SYS_ARCH_H__ */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/lwip.mk b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/lwip.mk new file mode 100644 index 000000000..99a046b9d --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/lwip.mk @@ -0,0 +1,44 @@ +# List of the required lwIP files. +LWNETIFSRC = \ + ${CHIBIOS}/ext/lwip/src/netif/etharp.c \ + ${CHIBIOS}/ext/lwip/src/netif/loopif.c + +LWCORESRC = \ + ${CHIBIOS}/ext/lwip/src/core/dhcp.c \ + ${CHIBIOS}/ext/lwip/src/core/dns.c \ + ${CHIBIOS}/ext/lwip/src/core/init.c \ + ${CHIBIOS}/ext/lwip/src/core/mem.c \ + ${CHIBIOS}/ext/lwip/src/core/memp.c \ + ${CHIBIOS}/ext/lwip/src/core/netif.c \ + ${CHIBIOS}/ext/lwip/src/core/pbuf.c \ + ${CHIBIOS}/ext/lwip/src/core/raw.c \ + ${CHIBIOS}/ext/lwip/src/core/stats.c \ + ${CHIBIOS}/ext/lwip/src/core/sys.c \ + ${CHIBIOS}/ext/lwip/src/core/tcp.c \ + ${CHIBIOS}/ext/lwip/src/core/tcp_in.c \ + ${CHIBIOS}/ext/lwip/src/core/tcp_out.c \ + ${CHIBIOS}/ext/lwip/src/core/udp.c + +LWIPV4SRC = \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/autoip.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/icmp.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/igmp.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/inet.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/inet_chksum.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/ip.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/ip_addr.c \ + ${CHIBIOS}/ext/lwip/src/core/ipv4/ip_frag.c + +LWAPISRC = \ + ${CHIBIOS}/ext/lwip/src/api/api_lib.c \ + ${CHIBIOS}/ext/lwip/src/api/api_msg.c \ + ${CHIBIOS}/ext/lwip/src/api/err.c \ + ${CHIBIOS}/ext/lwip/src/api/netbuf.c \ + ${CHIBIOS}/ext/lwip/src/api/netdb.c \ + ${CHIBIOS}/ext/lwip/src/api/netifapi.c \ + ${CHIBIOS}/ext/lwip/src/api/sockets.c \ + ${CHIBIOS}/ext/lwip/src/api/tcpip.c + +LWINC = \ + ${CHIBIOS}/ext/lwip/src/include \ + ${CHIBIOS}/ext/lwip/src/include/ipv4 diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/netif/ethernetif.c b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/netif/ethernetif.c new file mode 100644 index 000000000..5716f6e58 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwip/netif/ethernetif.c @@ -0,0 +1,333 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ +/* + **** This file incorporates work covered by the following copyright and **** + **** permission notice: **** + + Copyright (c) 2001-2004 Swedish Institute of Computer Science. + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + OF SUCH DAMAGE. + + This file is part of the lwIP TCP/IP stack. + + Author: Adam Dunkels +*/ + +/** + * @file + * Ethernet Interface Skeleton + * + */ + +/* + * This file is a skeleton for developing Ethernet network interface + * drivers for lwIP. Add code to the low_level functions and do a + * search-and-replace for the word "ethernetif" to replace it with + * something that better describes your network interface. + */ + +#include "lwip/opt.h" + +#if 1 /* don't build, this is only a skeleton, see previous comment */ + +#include "lwip/def.h" +#include "lwip/mem.h" +#include "lwip/pbuf.h" +#include "lwip/sys.h" +#include +#include +#include "netif/etharp.h" +#include "netif/ppp_oe.h" + +/* Define those to better describe your network interface. */ +#define IFNAME0 'e' +#define IFNAME1 'n' + +/** + * Helper struct to hold private data used to operate your ethernet interface. + * Keeping the ethernet address of the MAC in this struct is not necessary + * as it is already kept in the struct netif. + * But this is only an example, anyway... + */ +struct ethernetif { + struct eth_addr *ethaddr; + /* Add whatever per-interface state that is needed here. */ +}; + +/* Forward declarations. */ +static void ethernetif_input(struct netif *netif); + +/** + * In this function, the hardware should be initialized. + * Called from ethernetif_init(). + * + * @param netif the already initialized lwip network interface structure + * for this ethernetif + */ +static void +low_level_init(struct netif *netif) +{ + struct ethernetif *ethernetif = netif->state; + + /* set MAC hardware address length */ + netif->hwaddr_len = ETHARP_HWADDR_LEN; + + /* set MAC hardware address */ +////////// netif->hwaddr[0] = ; +////////// ... +////////// netif->hwaddr[5] = ; + + /* maximum transfer unit */ + netif->mtu = 1500; + + /* device capabilities */ + /* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */ + netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP; + + /* Do whatever else is needed to initialize interface. */ +} + +/** + * This function should do the actual transmission of the packet. The packet is + * contained in the pbuf that is passed to the function. This pbuf + * might be chained. + * + * @param netif the lwip network interface structure for this ethernetif + * @param p the MAC packet to send (e.g. IP packet including MAC addresses and type) + * @return ERR_OK if the packet could be sent + * an err_t value if the packet couldn't be sent + * + * @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to + * strange results. You might consider waiting for space in the DMA queue + * to become availale since the stack doesn't retry to send a packet + * dropped because of memory failure (except for the TCP timers). + */ + +static err_t +low_level_output(struct netif *netif, struct pbuf *p) +{ + struct ethernetif *ethernetif = netif->state; + struct pbuf *q; + +////////// initiate transfer(); + +#if ETH_PAD_SIZE + pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ +#endif + + for(q = p; q != NULL; q = q->next) { + /* Send the data from the pbuf to the interface, one pbuf at a + time. The size of the data in each pbuf is kept in the ->len + variable. */ +////////// send data from(q->payload, q->len); + } + +////////// signal that packet should be sent(); + +#if ETH_PAD_SIZE + pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ +#endif + + LINK_STATS_INC(link.xmit); + + return ERR_OK; +} + +/** + * Should allocate a pbuf and transfer the bytes of the incoming + * packet from the interface into the pbuf. + * + * @param netif the lwip network interface structure for this ethernetif + * @return a pbuf filled with the received packet (including MAC header) + * NULL on memory error + */ +static struct pbuf * +low_level_input(struct netif *netif) +{ + struct ethernetif *ethernetif = netif->state; + struct pbuf *p, *q; + u16_t len; + + /* Obtain the size of the packet and put it into the "len" + variable. */ +////////// len = ; + +#if ETH_PAD_SIZE + len += ETH_PAD_SIZE; /* allow room for Ethernet padding */ +#endif + + /* We allocate a pbuf chain of pbufs from the pool. */ + p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL); + + if (p != NULL) { + +#if ETH_PAD_SIZE + pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ +#endif + + /* We iterate over the pbuf chain until we have read the entire + * packet into the pbuf. */ + for(q = p; q != NULL; q = q->next) { + /* Read enough bytes to fill this pbuf in the chain. The + * available data in the pbuf is given by the q->len + * variable. */ +////////// read data into(q->payload, q->len); + } +////////// acknowledge that packet has been read(); + +#if ETH_PAD_SIZE + pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ +#endif + + LINK_STATS_INC(link.recv); + } else { +////////// drop packet(); + LINK_STATS_INC(link.memerr); + LINK_STATS_INC(link.drop); + } + + return p; +} + +/** + * This function should be called when a packet is ready to be read + * from the interface. It uses the function low_level_input() that + * should handle the actual reception of bytes from the network + * interface. Then the type of the received packet is determined and + * the appropriate input function is called. + * + * @param netif the lwip network interface structure for this ethernetif + */ +static void +ethernetif_input(struct netif *netif) +{ + struct ethernetif *ethernetif; + struct eth_hdr *ethhdr; + struct pbuf *p; + + ethernetif = netif->state; + + /* move received packet into a new pbuf */ + p = low_level_input(netif); + /* no packet could be read, silently ignore this */ + if (p == NULL) return; + /* points to packet payload, which starts with an Ethernet header */ + ethhdr = p->payload; + + switch (htons(ethhdr->type)) { + /* IP or ARP packet? */ + case ETHTYPE_IP: + case ETHTYPE_ARP: +#if PPPOE_SUPPORT + /* PPPoE packet? */ + case ETHTYPE_PPPOEDISC: + case ETHTYPE_PPPOE: +#endif /* PPPOE_SUPPORT */ + /* full packet send to tcpip_thread to process */ + if (netif->input(p, netif)!=ERR_OK) + { LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n")); + pbuf_free(p); + p = NULL; + } + break; + + default: + pbuf_free(p); + p = NULL; + break; + } +} + +/** + * Should be called at the beginning of the program to set up the + * network interface. It calls the function low_level_init() to do the + * actual setup of the hardware. + * + * This function should be passed as a parameter to netif_add(). + * + * @param netif the lwip network interface structure for this ethernetif + * @return ERR_OK if the loopif is initialized + * ERR_MEM if private data couldn't be allocated + * any other err_t on error + */ +err_t +ethernetif_init(struct netif *netif) +{ + struct ethernetif *ethernetif; + + LWIP_ASSERT("netif != NULL", (netif != NULL)); + + ethernetif = mem_malloc(sizeof(struct ethernetif)); + if (ethernetif == NULL) { + LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n")); + return ERR_MEM; + } + +#if LWIP_NETIF_HOSTNAME + /* Initialize interface hostname */ + netif->hostname = "lwip"; +#endif /* LWIP_NETIF_HOSTNAME */ + + /* + * Initialize the snmp variables and counters inside the struct netif. + * The last argument should be replaced with your link speed, in units + * of bits per second. + */ + NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, ???); + + netif->state = ethernetif; + netif->name[0] = IFNAME0; + netif->name[1] = IFNAME1; + /* We directly use etharp_output() here to save a function call. + * You can instead declare your own function an call etharp_output() + * from it if you have to do some checks before sending (e.g. if link + * is available...) */ + netif->output = etharp_output; + netif->linkoutput = low_level_output; + + ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]); + + /* initialize the hardware */ + low_level_init(netif); + + return ERR_OK; +} + +#endif /* 0 */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h new file mode 100644 index 000000000..28f7c6fd2 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/lwipopts.h @@ -0,0 +1,1801 @@ +/* + * Copyright (c) 2001-2004 Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * This file is part of the lwIP TCP/IP stack. + * + * Author: Adam Dunkels + * + */ +#ifndef __LWIPOPT_H__ +#define __LWIPOPT_H__ + + +/* + ----------------------------------------------- + ---------- Platform specific locking ---------- + ----------------------------------------------- +*/ + +/** + * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain + * critical regions during buffer allocation, deallocation and memory + * allocation and deallocation. + */ +#ifndef SYS_LIGHTWEIGHT_PROT +#define SYS_LIGHTWEIGHT_PROT 0 +#endif + +/** + * NO_SYS==1: Provides VERY minimal functionality. Otherwise, + * use lwIP facilities. + */ +#ifndef NO_SYS +#define NO_SYS 0 +#endif + +/** + * MEMCPY: override this if you have a faster implementation at hand than the + * one included in your C library + */ +#ifndef MEMCPY +#define MEMCPY(dst,src,len) memcpy(dst,src,len) +#endif + +/** + * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a + * call to memcpy() if the length is known at compile time and is small. + */ +#ifndef SMEMCPY +#define SMEMCPY(dst,src,len) memcpy(dst,src,len) +#endif + +/* + ------------------------------------ + ---------- Memory options ---------- + ------------------------------------ +*/ +/** + * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library + * instead of the lwip internal allocator. Can save code size if you + * already use it. + */ +#ifndef MEM_LIBC_MALLOC +#define MEM_LIBC_MALLOC 0 +#endif + +/** +* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. +* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution +* speed and usage from interrupts! +*/ +#ifndef MEMP_MEM_MALLOC +#define MEMP_MEM_MALLOC 0 +#endif + +/** + * MEM_ALIGNMENT: should be set to the alignment of the CPU + * 4 byte alignment -> #define MEM_ALIGNMENT 4 + * 2 byte alignment -> #define MEM_ALIGNMENT 2 + */ +#ifndef MEM_ALIGNMENT +#define MEM_ALIGNMENT 4 +#endif + +/** + * MEM_SIZE: the size of the heap memory. If the application will send + * a lot of data that needs to be copied, this should be set high. + */ +#ifndef MEM_SIZE +#define MEM_SIZE 1600 +#endif + +/** + * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable + * amount of bytes before and after each memp element in every pool and fills + * it with a prominent default value. + * MEMP_OVERFLOW_CHECK == 0 no checking + * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed + * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time + * memp_malloc() or memp_free() is called (useful but slow!) + */ +#ifndef MEMP_OVERFLOW_CHECK +#define MEMP_OVERFLOW_CHECK 0 +#endif + +/** + * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make + * sure that there are no cycles in the linked lists. + */ +#ifndef MEMP_SANITY_CHECK +#define MEMP_SANITY_CHECK 0 +#endif + +/** + * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set + * of memory pools of various sizes. When mem_malloc is called, an element of + * the smallest pool that can provide the length needed is returned. + * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. + */ +#ifndef MEM_USE_POOLS +#define MEM_USE_POOLS 0 +#endif + +/** + * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next + * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more + * reliable. */ +#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL +#define MEM_USE_POOLS_TRY_BIGGER_POOL 0 +#endif + +/** + * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h + * that defines additional pools beyond the "standard" ones required + * by lwIP. If you set this to 1, you must have lwippools.h in your + * inlude path somewhere. + */ +#ifndef MEMP_USE_CUSTOM_POOLS +#define MEMP_USE_CUSTOM_POOLS 0 +#endif + +/** + * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from + * interrupt context (or another context that doesn't allow waiting for a + * semaphore). + * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, + * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs + * with each loop so that mem_free can run. + * + * ATTENTION: As you can see from the above description, this leads to dis-/ + * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc + * can need longer. + * + * If you don't want that, at least for NO_SYS=0, you can still use the following + * functions to enqueue a deallocation call which then runs in the tcpip_thread + * context: + * - pbuf_free_callback(p); + * - mem_free_callback(m); + */ +#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT +#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 +#endif + +/* + ------------------------------------------------ + ---------- Internal Memory Pool Sizes ---------- + ------------------------------------------------ +*/ +/** + * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). + * If the application sends a lot of data out of ROM (or other static memory), + * this should be set high. + */ +#ifndef MEMP_NUM_PBUF +#define MEMP_NUM_PBUF 16 +#endif + +/** + * MEMP_NUM_RAW_PCB: Number of raw connection PCBs + * (requires the LWIP_RAW option) + */ +#ifndef MEMP_NUM_RAW_PCB +#define MEMP_NUM_RAW_PCB 4 +#endif + +/** + * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One + * per active UDP "connection". + * (requires the LWIP_UDP option) + */ +#ifndef MEMP_NUM_UDP_PCB +#define MEMP_NUM_UDP_PCB 4 +#endif + +/** + * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. + * (requires the LWIP_TCP option) + */ +#ifndef MEMP_NUM_TCP_PCB +#define MEMP_NUM_TCP_PCB 5 +#endif + +/** + * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. + * (requires the LWIP_TCP option) + */ +#ifndef MEMP_NUM_TCP_PCB_LISTEN +#define MEMP_NUM_TCP_PCB_LISTEN 8 +#endif + +/** + * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. + * (requires the LWIP_TCP option) + */ +#ifndef MEMP_NUM_TCP_SEG +#define MEMP_NUM_TCP_SEG 16 +#endif + +/** + * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for + * reassembly (whole packets, not fragments!) + */ +#ifndef MEMP_NUM_REASSDATA +#define MEMP_NUM_REASSDATA 5 +#endif + +/** + * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing + * packets (pbufs) that are waiting for an ARP request (to resolve + * their destination address) to finish. + * (requires the ARP_QUEUEING option) + */ +#ifndef MEMP_NUM_ARP_QUEUE +#define MEMP_NUM_ARP_QUEUE 30 +#endif + +/** + * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces + * can be members et the same time (one per netif - allsystems group -, plus one + * per netif membership). + * (requires the LWIP_IGMP option) + */ +#ifndef MEMP_NUM_IGMP_GROUP +#define MEMP_NUM_IGMP_GROUP 8 +#endif + +/** + * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. + * (requires NO_SYS==0) + */ +#ifndef MEMP_NUM_SYS_TIMEOUT +#define MEMP_NUM_SYS_TIMEOUT 3 +#endif + +/** + * MEMP_NUM_NETBUF: the number of struct netbufs. + * (only needed if you use the sequential API, like api_lib.c) + */ +#ifndef MEMP_NUM_NETBUF +#define MEMP_NUM_NETBUF 2 +#endif + +/** + * MEMP_NUM_NETCONN: the number of struct netconns. + * (only needed if you use the sequential API, like api_lib.c) + */ +#ifndef MEMP_NUM_NETCONN +#define MEMP_NUM_NETCONN 4 +#endif + +/** + * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used + * for callback/timeout API communication. + * (only needed if you use tcpip.c) + */ +#ifndef MEMP_NUM_TCPIP_MSG_API +#define MEMP_NUM_TCPIP_MSG_API 8 +#endif + +/** + * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used + * for incoming packets. + * (only needed if you use tcpip.c) + */ +#ifndef MEMP_NUM_TCPIP_MSG_INPKT +#define MEMP_NUM_TCPIP_MSG_INPKT 8 +#endif + +/** + * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. + */ +#ifndef PBUF_POOL_SIZE +#define PBUF_POOL_SIZE 16 +#endif + +/* + --------------------------------- + ---------- ARP options ---------- + --------------------------------- +*/ +/** + * LWIP_ARP==1: Enable ARP functionality. + */ +#ifndef LWIP_ARP +#define LWIP_ARP 1 +#endif + +/** + * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. + */ +#ifndef ARP_TABLE_SIZE +#define ARP_TABLE_SIZE 10 +#endif + +/** + * ARP_QUEUEING==1: Outgoing packets are queued during hardware address + * resolution. + */ +#ifndef ARP_QUEUEING +#define ARP_QUEUEING 1 +#endif + +/** + * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be + * updated with the source MAC and IP addresses supplied in the packet. + * You may want to disable this if you do not trust LAN peers to have the + * correct addresses, or as a limited approach to attempt to handle + * spoofing. If disabled, lwIP will need to make a new ARP request if + * the peer is not already in the ARP table, adding a little latency. + */ +#ifndef ETHARP_TRUST_IP_MAC +#define ETHARP_TRUST_IP_MAC 1 +#endif + +/* + -------------------------------- + ---------- IP options ---------- + -------------------------------- +*/ +/** + * IP_FORWARD==1: Enables the ability to forward IP packets across network + * interfaces. If you are going to run lwIP on a device with only one network + * interface, define this to 0. + */ +#ifndef IP_FORWARD +#define IP_FORWARD 0 +#endif + +/** + * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. + * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. + * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). + */ +#ifndef IP_OPTIONS_ALLOWED +#define IP_OPTIONS_ALLOWED 1 +#endif + +/** + * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that + * this option does not affect outgoing packet sizes, which can be controlled + * via IP_FRAG. + */ +#ifndef IP_REASSEMBLY +#define IP_REASSEMBLY 1 +#endif + +/** + * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note + * that this option does not affect incoming packet sizes, which can be + * controlled via IP_REASSEMBLY. + */ +#ifndef IP_FRAG +#define IP_FRAG 1 +#endif + +/** + * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) + * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived + * in this time, the whole packet is discarded. + */ +#ifndef IP_REASS_MAXAGE +#define IP_REASS_MAXAGE 3 +#endif + +/** + * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. + * Since the received pbufs are enqueued, be sure to configure + * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive + * packets even if the maximum amount of fragments is enqueued for reassembly! + */ +#ifndef IP_REASS_MAX_PBUFS +#define IP_REASS_MAX_PBUFS 10 +#endif + +/** + * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP + * fragmentation. Otherwise pbufs are allocated and reference the original + * packet data to be fragmented. + */ +#ifndef IP_FRAG_USES_STATIC_BUF +#define IP_FRAG_USES_STATIC_BUF 1 +#endif + +/** + * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer + * (requires IP_FRAG_USES_STATIC_BUF==1) + */ +#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) +#define IP_FRAG_MAX_MTU 1500 +#endif + +/** + * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. + */ +#ifndef IP_DEFAULT_TTL +#define IP_DEFAULT_TTL 255 +#endif + +/** + * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast + * filter per pcb on udp and raw send operations. To enable broadcast filter + * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. + */ +#ifndef IP_SOF_BROADCAST +#define IP_SOF_BROADCAST 0 +#endif + +/** + * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast + * filter on recv operations. + */ +#ifndef IP_SOF_BROADCAST_RECV +#define IP_SOF_BROADCAST_RECV 0 +#endif + +/* + ---------------------------------- + ---------- ICMP options ---------- + ---------------------------------- +*/ +/** + * LWIP_ICMP==1: Enable ICMP module inside the IP stack. + * Be careful, disable that make your product non-compliant to RFC1122 + */ +#ifndef LWIP_ICMP +#define LWIP_ICMP 1 +#endif + +/** + * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. + */ +#ifndef ICMP_TTL +#define ICMP_TTL (IP_DEFAULT_TTL) +#endif + +/** + * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) + */ +#ifndef LWIP_BROADCAST_PING +#define LWIP_BROADCAST_PING 0 +#endif + +/** + * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) + */ +#ifndef LWIP_MULTICAST_PING +#define LWIP_MULTICAST_PING 0 +#endif + +/* + --------------------------------- + ---------- RAW options ---------- + --------------------------------- +*/ +/** + * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. + */ +#ifndef LWIP_RAW +#define LWIP_RAW 1 +#endif + +/** + * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. + */ +#ifndef RAW_TTL +#define RAW_TTL (IP_DEFAULT_TTL) +#endif + +/* + ---------------------------------- + ---------- DHCP options ---------- + ---------------------------------- +*/ +/** + * LWIP_DHCP==1: Enable DHCP module. + */ +#ifndef LWIP_DHCP +#define LWIP_DHCP 0 +#endif + +/** + * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. + */ +#ifndef DHCP_DOES_ARP_CHECK +#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) +#endif + +/* + ------------------------------------ + ---------- AUTOIP options ---------- + ------------------------------------ +*/ +/** + * LWIP_AUTOIP==1: Enable AUTOIP module. + */ +#ifndef LWIP_AUTOIP +#define LWIP_AUTOIP 0 +#endif + +/** + * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on + * the same interface at the same time. + */ +#ifndef LWIP_DHCP_AUTOIP_COOP +#define LWIP_DHCP_AUTOIP_COOP 0 +#endif + +/** + * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes + * that should be sent before falling back on AUTOIP. This can be set + * as low as 1 to get an AutoIP address very quickly, but you should + * be prepared to handle a changing IP address when DHCP overrides + * AutoIP. + */ +#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES +#define LWIP_DHCP_AUTOIP_COOP_TRIES 9 +#endif + +/* + ---------------------------------- + ---------- SNMP options ---------- + ---------------------------------- +*/ +/** + * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP + * transport. + */ +#ifndef LWIP_SNMP +#define LWIP_SNMP 0 +#endif + +/** + * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will + * allow. At least one request buffer is required. + */ +#ifndef SNMP_CONCURRENT_REQUESTS +#define SNMP_CONCURRENT_REQUESTS 1 +#endif + +/** + * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap + * destination is required + */ +#ifndef SNMP_TRAP_DESTINATIONS +#define SNMP_TRAP_DESTINATIONS 1 +#endif + +/** + * SNMP_PRIVATE_MIB: + */ +#ifndef SNMP_PRIVATE_MIB +#define SNMP_PRIVATE_MIB 0 +#endif + +/** + * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not + * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). + * Unsafe requests are disabled by default! + */ +#ifndef SNMP_SAFE_REQUESTS +#define SNMP_SAFE_REQUESTS 1 +#endif + +/* + ---------------------------------- + ---------- IGMP options ---------- + ---------------------------------- +*/ +/** + * LWIP_IGMP==1: Turn on IGMP module. + */ +#ifndef LWIP_IGMP +#define LWIP_IGMP 0 +#endif + +/* + ---------------------------------- + ---------- DNS options ----------- + ---------------------------------- +*/ +/** + * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS + * transport. + */ +#ifndef LWIP_DNS +#define LWIP_DNS 0 +#endif + +/** DNS maximum number of entries to maintain locally. */ +#ifndef DNS_TABLE_SIZE +#define DNS_TABLE_SIZE 4 +#endif + +/** DNS maximum host name length supported in the name table. */ +#ifndef DNS_MAX_NAME_LENGTH +#define DNS_MAX_NAME_LENGTH 256 +#endif + +/** The maximum of DNS servers */ +#ifndef DNS_MAX_SERVERS +#define DNS_MAX_SERVERS 2 +#endif + +/** DNS do a name checking between the query and the response. */ +#ifndef DNS_DOES_NAME_CHECK +#define DNS_DOES_NAME_CHECK 1 +#endif + +/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if + DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2. + The buffer will be of size DNS_MSG_SIZE */ +#ifndef DNS_USES_STATIC_BUF +#define DNS_USES_STATIC_BUF 1 +#endif + +/** DNS message max. size. Default value is RFC compliant. */ +#ifndef DNS_MSG_SIZE +#define DNS_MSG_SIZE 512 +#endif + +/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, + * you have to define + * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} + * (an array of structs name/address, where address is an u32_t in network + * byte order). + * + * Instead, you can also use an external function: + * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) + * that returns the IP address or INADDR_NONE if not found. + */ +#ifndef DNS_LOCAL_HOSTLIST +#define DNS_LOCAL_HOSTLIST 0 +#endif /* DNS_LOCAL_HOSTLIST */ + +/** If this is turned on, the local host-list can be dynamically changed + * at runtime. */ +#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC +#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 +#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ + +/* + --------------------------------- + ---------- UDP options ---------- + --------------------------------- +*/ +/** + * LWIP_UDP==1: Turn on UDP. + */ +#ifndef LWIP_UDP +#define LWIP_UDP 1 +#endif + +/** + * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) + */ +#ifndef LWIP_UDPLITE +#define LWIP_UDPLITE 0 +#endif + +/** + * UDP_TTL: Default Time-To-Live value. + */ +#ifndef UDP_TTL +#define UDP_TTL (IP_DEFAULT_TTL) +#endif + +/* + --------------------------------- + ---------- TCP options ---------- + --------------------------------- +*/ +/** + * LWIP_TCP==1: Turn on TCP. + */ +#ifndef LWIP_TCP +#define LWIP_TCP 1 +#endif + +/** + * TCP_TTL: Default Time-To-Live value. + */ +#ifndef TCP_TTL +#define TCP_TTL (IP_DEFAULT_TTL) +#endif + +/** + * TCP_WND: The size of a TCP window. This must be at least + * (2 * TCP_MSS) for things to work well + */ +#ifndef TCP_WND +#define TCP_WND 2048 +#endif + +/** + * TCP_MAXRTX: Maximum number of retransmissions of data segments. + */ +#ifndef TCP_MAXRTX +#define TCP_MAXRTX 12 +#endif + +/** + * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. + */ +#ifndef TCP_SYNMAXRTX +#define TCP_SYNMAXRTX 6 +#endif + +/** + * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. + * Define to 0 if your device is low on memory. + */ +#ifndef TCP_QUEUE_OOSEQ +#define TCP_QUEUE_OOSEQ (LWIP_TCP) +#endif + +/** + * TCP_MSS: TCP Maximum segment size. (default is 128, a *very* + * conservative default.) + * For the receive side, this MSS is advertised to the remote side + * when opening a connection. For the transmit size, this MSS sets + * an upper limit on the MSS advertised by the remote host. + */ +#ifndef TCP_MSS +#define TCP_MSS 128 +#endif + +/** + * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really + * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which + * reflects the available reassembly buffer size at the remote host) and the + * largest size permitted by the IP layer" (RFC 1122) + * Setting this to 1 enables code that checks TCP_MSS against the MTU of the + * netif used for a connection and limits the MSS if it would be too big otherwise. + */ +#ifndef TCP_CALCULATE_EFF_SEND_MSS +#define TCP_CALCULATE_EFF_SEND_MSS 1 +#endif + + +/** + * TCP_SND_BUF: TCP sender buffer space (bytes). + */ +#ifndef TCP_SND_BUF +#define TCP_SND_BUF 256 +#endif + +/** + * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least + * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. + */ +#ifndef TCP_SND_QUEUELEN +#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF/TCP_MSS)) +#endif + +/** + * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal + * to TCP_SND_BUF. It is the amount of space which must be available in the + * TCP snd_buf for select to return writable. + */ +#ifndef TCP_SNDLOWAT +#define TCP_SNDLOWAT (TCP_SND_BUF/2) +#endif + +/** + * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. + */ +#ifndef TCP_LISTEN_BACKLOG +#define TCP_LISTEN_BACKLOG 0 +#endif + +/** + * The maximum allowed backlog for TCP listen netconns. + * This backlog is used unless another is explicitly specified. + * 0xff is the maximum (u8_t). + */ +#ifndef TCP_DEFAULT_LISTEN_BACKLOG +#define TCP_DEFAULT_LISTEN_BACKLOG 0xff +#endif + +/** + * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. + */ +#ifndef LWIP_TCP_TIMESTAMPS +#define LWIP_TCP_TIMESTAMPS 0 +#endif + +/** + * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an + * explicit window update + */ +#ifndef TCP_WND_UPDATE_THRESHOLD +#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) +#endif + +/** + * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1. + * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all + * events (accept, sent, etc) that happen in the system. + * LWIP_CALLBACK_API==1: The PCB callback function is called directly + * for the event. + */ +//#define LWIP_EVENT_API + +/* + ---------------------------------- + ---------- Pbuf options ---------- + ---------------------------------- +*/ +/** + * PBUF_LINK_HLEN: the number of bytes that should be allocated for a + * link level header. The default is 14, the standard value for + * Ethernet. + */ +#ifndef PBUF_LINK_HLEN +#define PBUF_LINK_HLEN 14 +#endif + +/** + * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is + * designed to accomodate single full size TCP frame in one pbuf, including + * TCP_MSS, IP header, and link header. + */ +#ifndef PBUF_POOL_BUFSIZE +#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) +#endif + +/* + ------------------------------------------------ + ---------- Network Interfaces options ---------- + ------------------------------------------------ +*/ +/** + * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname + * field. + */ +#ifndef LWIP_NETIF_HOSTNAME +#define LWIP_NETIF_HOSTNAME 0 +#endif + +/** + * LWIP_NETIF_API==1: Support netif api (in netifapi.c) + */ +#ifndef LWIP_NETIF_API +#define LWIP_NETIF_API 0 +#endif + +/** + * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface + * changes its up/down status (i.e., due to DHCP IP acquistion) + */ +#ifndef LWIP_NETIF_STATUS_CALLBACK +#define LWIP_NETIF_STATUS_CALLBACK 0 +#endif + +/** + * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface + * whenever the link changes (i.e., link down) + */ +#ifndef LWIP_NETIF_LINK_CALLBACK +#define LWIP_NETIF_LINK_CALLBACK 0 +#endif + +/** + * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table + * indices) in struct netif. TCP and UDP can make use of this to prevent + * scanning the ARP table for every sent packet. While this is faster for big + * ARP tables or many concurrent connections, it might be counterproductive + * if you have a tiny ARP table or if there never are concurrent connections. + */ +#ifndef LWIP_NETIF_HWADDRHINT +#define LWIP_NETIF_HWADDRHINT 0 +#endif + +/** + * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP + * address equal to the netif IP address, looping them back up the stack. + */ +#ifndef LWIP_NETIF_LOOPBACK +#define LWIP_NETIF_LOOPBACK 0 +#endif + +/** + * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback + * sending for each netif (0 = disabled) + */ +#ifndef LWIP_LOOPBACK_MAX_PBUFS +#define LWIP_LOOPBACK_MAX_PBUFS 0 +#endif + +/** + * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in + * the system, as netifs must change how they behave depending on this setting + * for the LWIP_NETIF_LOOPBACK option to work. + * Setting this is needed to avoid reentering non-reentrant functions like + * tcp_input(). + * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a + * multithreaded environment like tcpip.c. In this case, netif->input() + * is called directly. + * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. + * The packets are put on a list and netif_poll() must be called in + * the main application loop. + */ +#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING +#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) +#endif + +/** + * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data + * to be sent into one single pbuf. This is for compatibility with DMA-enabled + * MACs that do not support scatter-gather. + * Beware that this might involve CPU-memcpy before transmitting that would not + * be needed without this flag! Use this only if you need to! + * + * @todo: TCP and IP-frag do not work with this, yet: + */ +#ifndef LWIP_NETIF_TX_SINGLE_PBUF +#define LWIP_NETIF_TX_SINGLE_PBUF 0 +#endif /* LWIP_NETIF_TX_SINGLE_PBUF */ + +/* + ------------------------------------ + ---------- LOOPIF options ---------- + ------------------------------------ +*/ +/** + * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c + */ +#ifndef LWIP_HAVE_LOOPIF +#define LWIP_HAVE_LOOPIF 0 +#endif + +/* + ------------------------------------ + ---------- SLIPIF options ---------- + ------------------------------------ +*/ +/** + * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c + */ +#ifndef LWIP_HAVE_SLIPIF +#define LWIP_HAVE_SLIPIF 0 +#endif + +/* + ------------------------------------ + ---------- Thread options ---------- + ------------------------------------ +*/ +/** + * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. + */ +#ifndef TCPIP_THREAD_NAME +#define TCPIP_THREAD_NAME "tcpip_thread" +#endif + +/** + * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef TCPIP_THREAD_STACKSIZE +#define TCPIP_THREAD_STACKSIZE 256 +#endif + +/** + * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef TCPIP_THREAD_PRIO +#define TCPIP_THREAD_PRIO (LOWPRIO) +#endif + +/** + * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages + * The queue size value itself is platform-dependent, but is passed to + * sys_mbox_new() when tcpip_init is called. + */ +#ifndef TCPIP_MBOX_SIZE +#define TCPIP_MBOX_SIZE 0 +#endif + +/** + * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. + */ +#ifndef SLIPIF_THREAD_NAME +#define SLIPIF_THREAD_NAME "slipif_loop" +#endif + +/** + * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef SLIPIF_THREAD_STACKSIZE +#define SLIPIF_THREAD_STACKSIZE 0 +#endif + +/** + * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef SLIPIF_THREAD_PRIO +#define SLIPIF_THREAD_PRIO 1 +#endif + +/** + * PPP_THREAD_NAME: The name assigned to the pppMain thread. + */ +#ifndef PPP_THREAD_NAME +#define PPP_THREAD_NAME "pppMain" +#endif + +/** + * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef PPP_THREAD_STACKSIZE +#define PPP_THREAD_STACKSIZE 0 +#endif + +/** + * PPP_THREAD_PRIO: The priority assigned to the pppMain thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef PPP_THREAD_PRIO +#define PPP_THREAD_PRIO 1 +#endif + +/** + * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. + */ +#ifndef DEFAULT_THREAD_NAME +#define DEFAULT_THREAD_NAME "lwIP" +#endif + +/** + * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef DEFAULT_THREAD_STACKSIZE +#define DEFAULT_THREAD_STACKSIZE 0 +#endif + +/** + * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef DEFAULT_THREAD_PRIO +#define DEFAULT_THREAD_PRIO 1 +#endif + +/** + * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a + * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed + * to sys_mbox_new() when the recvmbox is created. + */ +#ifndef DEFAULT_RAW_RECVMBOX_SIZE +#define DEFAULT_RAW_RECVMBOX_SIZE 0 +#endif + +/** + * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a + * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed + * to sys_mbox_new() when the recvmbox is created. + */ +#ifndef DEFAULT_UDP_RECVMBOX_SIZE +#define DEFAULT_UDP_RECVMBOX_SIZE 0 +#endif + +/** + * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a + * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed + * to sys_mbox_new() when the recvmbox is created. + */ +#ifndef DEFAULT_TCP_RECVMBOX_SIZE +#define DEFAULT_TCP_RECVMBOX_SIZE 0 +#endif + +/** + * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. + * The queue size value itself is platform-dependent, but is passed to + * sys_mbox_new() when the acceptmbox is created. + */ +#ifndef DEFAULT_ACCEPTMBOX_SIZE +#define DEFAULT_ACCEPTMBOX_SIZE 0 +#endif + +/* + ---------------------------------------------- + ---------- Sequential layer options ---------- + ---------------------------------------------- +*/ +/** + * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) + * Don't use it if you're not an active lwIP project member + */ +#ifndef LWIP_TCPIP_CORE_LOCKING +#define LWIP_TCPIP_CORE_LOCKING 0 +#endif + +/** + * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) + */ +#ifndef LWIP_NETCONN +#define LWIP_NETCONN 1 +#endif + +/* + ------------------------------------ + ---------- Socket options ---------- + ------------------------------------ +*/ +/** + * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) + */ +#ifndef LWIP_SOCKET +#define LWIP_SOCKET 1 +#endif + +/** + * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names. + * (only used if you use sockets.c) + */ +#ifndef LWIP_COMPAT_SOCKETS +#define LWIP_COMPAT_SOCKETS 1 +#endif + +/** + * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names. + * Disable this option if you use a POSIX operating system that uses the same + * names (read, write & close). (only used if you use sockets.c) + */ +#ifndef LWIP_POSIX_SOCKETS_IO_NAMES +#define LWIP_POSIX_SOCKETS_IO_NAMES 1 +#endif + +/** + * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT + * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set + * in seconds. (does not require sockets.c, and will affect tcp.c) + */ +#ifndef LWIP_TCP_KEEPALIVE +#define LWIP_TCP_KEEPALIVE 0 +#endif + +/** + * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing. + */ +#ifndef LWIP_SO_RCVTIMEO +#define LWIP_SO_RCVTIMEO 0 +#endif + +/** + * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. + */ +#ifndef LWIP_SO_RCVBUF +#define LWIP_SO_RCVBUF 0 +#endif + +/** + * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. + */ +#ifndef RECV_BUFSIZE_DEFAULT +#define RECV_BUFSIZE_DEFAULT INT_MAX +#endif + +/** + * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE! + */ +#ifndef SO_REUSE +#define SO_REUSE 0 +#endif + +/* + ---------------------------------------- + ---------- Statistics options ---------- + ---------------------------------------- +*/ +/** + * LWIP_STATS==1: Enable statistics collection in lwip_stats. + */ +#ifndef LWIP_STATS +#define LWIP_STATS 1 +#endif + +#if LWIP_STATS + +/** + * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. + */ +#ifndef LWIP_STATS_DISPLAY +#define LWIP_STATS_DISPLAY 0 +#endif + +/** + * LINK_STATS==1: Enable link stats. + */ +#ifndef LINK_STATS +#define LINK_STATS 1 +#endif + +/** + * ETHARP_STATS==1: Enable etharp stats. + */ +#ifndef ETHARP_STATS +#define ETHARP_STATS (LWIP_ARP) +#endif + +/** + * IP_STATS==1: Enable IP stats. + */ +#ifndef IP_STATS +#define IP_STATS 1 +#endif + +/** + * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is + * on if using either frag or reass. + */ +#ifndef IPFRAG_STATS +#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) +#endif + +/** + * ICMP_STATS==1: Enable ICMP stats. + */ +#ifndef ICMP_STATS +#define ICMP_STATS 1 +#endif + +/** + * IGMP_STATS==1: Enable IGMP stats. + */ +#ifndef IGMP_STATS +#define IGMP_STATS (LWIP_IGMP) +#endif + +/** + * UDP_STATS==1: Enable UDP stats. Default is on if + * UDP enabled, otherwise off. + */ +#ifndef UDP_STATS +#define UDP_STATS (LWIP_UDP) +#endif + +/** + * TCP_STATS==1: Enable TCP stats. Default is on if TCP + * enabled, otherwise off. + */ +#ifndef TCP_STATS +#define TCP_STATS (LWIP_TCP) +#endif + +/** + * MEM_STATS==1: Enable mem.c stats. + */ +#ifndef MEM_STATS +#define MEM_STATS 1 +#endif + +/** + * MEMP_STATS==1: Enable memp.c pool stats. + */ +#ifndef MEMP_STATS +#define MEMP_STATS 1 +#endif + +/** + * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). + */ +#ifndef SYS_STATS +#define SYS_STATS 1 +#endif + +#else + +#define LINK_STATS 0 +#define IP_STATS 0 +#define IPFRAG_STATS 0 +#define ICMP_STATS 0 +#define IGMP_STATS 0 +#define UDP_STATS 0 +#define TCP_STATS 0 +#define MEM_STATS 0 +#define MEMP_STATS 0 +#define SYS_STATS 0 +#define LWIP_STATS_DISPLAY 0 + +#endif /* LWIP_STATS */ + +/* + --------------------------------- + ---------- PPP options ---------- + --------------------------------- +*/ +/** + * PPP_SUPPORT==1: Enable PPP. + */ +#ifndef PPP_SUPPORT +#define PPP_SUPPORT 0 +#endif + +/** + * PPPOE_SUPPORT==1: Enable PPP Over Ethernet + */ +#ifndef PPPOE_SUPPORT +#define PPPOE_SUPPORT 0 +#endif + +/** + * PPPOS_SUPPORT==1: Enable PPP Over Serial + */ +#ifndef PPPOS_SUPPORT +#define PPPOS_SUPPORT PPP_SUPPORT +#endif + +#if PPP_SUPPORT + +/** + * NUM_PPP: Max PPP sessions. + */ +#ifndef NUM_PPP +#define NUM_PPP 1 +#endif + +/** + * PAP_SUPPORT==1: Support PAP. + */ +#ifndef PAP_SUPPORT +#define PAP_SUPPORT 0 +#endif + +/** + * CHAP_SUPPORT==1: Support CHAP. + */ +#ifndef CHAP_SUPPORT +#define CHAP_SUPPORT 0 +#endif + +/** + * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! + */ +#ifndef MSCHAP_SUPPORT +#define MSCHAP_SUPPORT 0 +#endif + +/** + * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! + */ +#ifndef CBCP_SUPPORT +#define CBCP_SUPPORT 0 +#endif + +/** + * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! + */ +#ifndef CCP_SUPPORT +#define CCP_SUPPORT 0 +#endif + +/** + * VJ_SUPPORT==1: Support VJ header compression. + */ +#ifndef VJ_SUPPORT +#define VJ_SUPPORT 0 +#endif + +/** + * MD5_SUPPORT==1: Support MD5 (see also CHAP). + */ +#ifndef MD5_SUPPORT +#define MD5_SUPPORT 0 +#endif + +/* + * Timeouts + */ +#ifndef FSM_DEFTIMEOUT +#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ +#endif + +#ifndef FSM_DEFMAXTERMREQS +#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ +#endif + +#ifndef FSM_DEFMAXCONFREQS +#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ +#endif + +#ifndef FSM_DEFMAXNAKLOOPS +#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ +#endif + +#ifndef UPAP_DEFTIMEOUT +#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ +#endif + +#ifndef UPAP_DEFREQTIME +#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ +#endif + +#ifndef CHAP_DEFTIMEOUT +#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ +#endif + +#ifndef CHAP_DEFTRANSMITS +#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ +#endif + +/* Interval in seconds between keepalive echo requests, 0 to disable. */ +#ifndef LCP_ECHOINTERVAL +#define LCP_ECHOINTERVAL 0 +#endif + +/* Number of unanswered echo requests before failure. */ +#ifndef LCP_MAXECHOFAILS +#define LCP_MAXECHOFAILS 3 +#endif + +/* Max Xmit idle time (in jiffies) before resend flag char. */ +#ifndef PPP_MAXIDLEFLAG +#define PPP_MAXIDLEFLAG 100 +#endif + +/* + * Packet sizes + * + * Note - lcp shouldn't be allowed to negotiate stuff outside these + * limits. See lcp.h in the pppd directory. + * (XXX - these constants should simply be shared by lcp.c instead + * of living in lcp.h) + */ +#define PPP_MTU 1500 /* Default MTU (size of Info field) */ +#ifndef PPP_MAXMTU +/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ +#define PPP_MAXMTU 1500 /* Largest MTU we allow */ +#endif +#define PPP_MINMTU 64 +#define PPP_MRU 1500 /* default MRU = max length of info field */ +#define PPP_MAXMRU 1500 /* Largest MRU we allow */ +#ifndef PPP_DEFMRU +#define PPP_DEFMRU 296 /* Try for this */ +#endif +#define PPP_MINMRU 128 /* No MRUs below this */ + + +#define MAXNAMELEN 256 /* max length of hostname or name for auth */ +#define MAXSECRETLEN 256 /* max length of password or secret */ + +#endif /* PPP_SUPPORT */ + +/* + -------------------------------------- + ---------- Checksum options ---------- + -------------------------------------- +*/ +/** + * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. + */ +#ifndef CHECKSUM_GEN_IP +#define CHECKSUM_GEN_IP 1 +#endif + +/** + * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. + */ +#ifndef CHECKSUM_GEN_UDP +#define CHECKSUM_GEN_UDP 1 +#endif + +/** + * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. + */ +#ifndef CHECKSUM_GEN_TCP +#define CHECKSUM_GEN_TCP 1 +#endif + +/** + * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. + */ +#ifndef CHECKSUM_CHECK_IP +#define CHECKSUM_CHECK_IP 1 +#endif + +/** + * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. + */ +#ifndef CHECKSUM_CHECK_UDP +#define CHECKSUM_CHECK_UDP 1 +#endif + +/** + * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. + */ +#ifndef CHECKSUM_CHECK_TCP +#define CHECKSUM_CHECK_TCP 1 +#endif + +/* + --------------------------------------- + ---------- Debugging options ---------- + --------------------------------------- +*/ +/** + * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is + * compared against this value. If it is smaller, then debugging + * messages are written. + */ +#ifndef LWIP_DBG_MIN_LEVEL +#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_OFF +#endif + +/** + * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable + * debug messages of certain types. + */ +#ifndef LWIP_DBG_TYPES_ON +#define LWIP_DBG_TYPES_ON LWIP_DBG_ON +#endif + +/** + * ETHARP_DEBUG: Enable debugging in etharp.c. + */ +#ifndef ETHARP_DEBUG +#define ETHARP_DEBUG LWIP_DBG_OFF +#endif + +/** + * NETIF_DEBUG: Enable debugging in netif.c. + */ +#ifndef NETIF_DEBUG +#define NETIF_DEBUG LWIP_DBG_OFF +#endif + +/** + * PBUF_DEBUG: Enable debugging in pbuf.c. + */ +#ifndef PBUF_DEBUG +#define PBUF_DEBUG LWIP_DBG_OFF +#endif + +/** + * API_LIB_DEBUG: Enable debugging in api_lib.c. + */ +#ifndef API_LIB_DEBUG +#define API_LIB_DEBUG LWIP_DBG_OFF +#endif + +/** + * API_MSG_DEBUG: Enable debugging in api_msg.c. + */ +#ifndef API_MSG_DEBUG +#define API_MSG_DEBUG LWIP_DBG_OFF +#endif + +/** + * SOCKETS_DEBUG: Enable debugging in sockets.c. + */ +#ifndef SOCKETS_DEBUG +#define SOCKETS_DEBUG LWIP_DBG_OFF +#endif + +/** + * ICMP_DEBUG: Enable debugging in icmp.c. + */ +#ifndef ICMP_DEBUG +#define ICMP_DEBUG LWIP_DBG_OFF +#endif + +/** + * IGMP_DEBUG: Enable debugging in igmp.c. + */ +#ifndef IGMP_DEBUG +#define IGMP_DEBUG LWIP_DBG_OFF +#endif + +/** + * INET_DEBUG: Enable debugging in inet.c. + */ +#ifndef INET_DEBUG +#define INET_DEBUG LWIP_DBG_OFF +#endif + +/** + * IP_DEBUG: Enable debugging for IP. + */ +#ifndef IP_DEBUG +#define IP_DEBUG LWIP_DBG_OFF +#endif + +/** + * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. + */ +#ifndef IP_REASS_DEBUG +#define IP_REASS_DEBUG LWIP_DBG_OFF +#endif + +/** + * RAW_DEBUG: Enable debugging in raw.c. + */ +#ifndef RAW_DEBUG +#define RAW_DEBUG LWIP_DBG_OFF +#endif + +/** + * MEM_DEBUG: Enable debugging in mem.c. + */ +#ifndef MEM_DEBUG +#define MEM_DEBUG LWIP_DBG_OFF +#endif + +/** + * MEMP_DEBUG: Enable debugging in memp.c. + */ +#ifndef MEMP_DEBUG +#define MEMP_DEBUG LWIP_DBG_OFF +#endif + +/** + * SYS_DEBUG: Enable debugging in sys.c. + */ +#ifndef SYS_DEBUG +#define SYS_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_DEBUG: Enable debugging for TCP. + */ +#ifndef TCP_DEBUG +#define TCP_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. + */ +#ifndef TCP_INPUT_DEBUG +#define TCP_INPUT_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. + */ +#ifndef TCP_FR_DEBUG +#define TCP_FR_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit + * timeout. + */ +#ifndef TCP_RTO_DEBUG +#define TCP_RTO_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. + */ +#ifndef TCP_CWND_DEBUG +#define TCP_CWND_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. + */ +#ifndef TCP_WND_DEBUG +#define TCP_WND_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. + */ +#ifndef TCP_OUTPUT_DEBUG +#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. + */ +#ifndef TCP_RST_DEBUG +#define TCP_RST_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. + */ +#ifndef TCP_QLEN_DEBUG +#define TCP_QLEN_DEBUG LWIP_DBG_OFF +#endif + +/** + * UDP_DEBUG: Enable debugging in UDP. + */ +#ifndef UDP_DEBUG +#define UDP_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCPIP_DEBUG: Enable debugging in tcpip.c. + */ +#ifndef TCPIP_DEBUG +#define TCPIP_DEBUG LWIP_DBG_OFF +#endif + +/** + * PPP_DEBUG: Enable debugging for PPP. + */ +#ifndef PPP_DEBUG +#define PPP_DEBUG LWIP_DBG_OFF +#endif + +/** + * SLIP_DEBUG: Enable debugging in slipif.c. + */ +#ifndef SLIP_DEBUG +#define SLIP_DEBUG LWIP_DBG_OFF +#endif + +/** + * DHCP_DEBUG: Enable debugging in dhcp.c. + */ +#ifndef DHCP_DEBUG +#define DHCP_DEBUG LWIP_DBG_OFF +#endif + +/** + * AUTOIP_DEBUG: Enable debugging in autoip.c. + */ +#ifndef AUTOIP_DEBUG +#define AUTOIP_DEBUG LWIP_DBG_OFF +#endif + +/** + * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. + */ +#ifndef SNMP_MSG_DEBUG +#define SNMP_MSG_DEBUG LWIP_DBG_OFF +#endif + +/** + * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. + */ +#ifndef SNMP_MIB_DEBUG +#define SNMP_MIB_DEBUG LWIP_DBG_OFF +#endif + +/** + * DNS_DEBUG: Enable debugging for DNS. + */ +#ifndef DNS_DEBUG +#define DNS_DEBUG LWIP_DBG_OFF +#endif + +#endif /* __LWIPOPT_H__ */ diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/main.c b/demos/ARM7-AT91SAM7X-LWIP-GCC/main.c new file mode 100644 index 000000000..f6c297a41 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/main.c @@ -0,0 +1,67 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include +#include +#include + +#include "board.h" + +static WORKING_AREA(waThread1, 64); +static msg_t Thread1(void *arg) { + + while (TRUE) { + palSetPad(IOPORT2, PIOB_LCD_BL); + chThdSleepMilliseconds(100); + palClearPad(IOPORT2, PIOB_LCD_BL); + chThdSleepMilliseconds(900); + } + return 0; +} + +/* + * Entry point, note, the main() function is already a thread in the system + * on entry. + */ +int main(int argc, char **argv) { + + /* + * Activates the serial driver 1 using the driver default configuration. + */ + sdStart(&SD1, NULL); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + if (!palReadPad(IOPORT2, PIOB_SW1)) + sdWrite(&SD1, (uint8_t *)"Hello World!\r\n", 14); + if (!palReadPad(IOPORT2, PIOB_SW2)) + TestThread(&SD1); + } + + return 0; +} diff --git a/demos/ARM7-AT91SAM7X-LWIP-GCC/readme.txt b/demos/ARM7-AT91SAM7X-LWIP-GCC/readme.txt new file mode 100644 index 000000000..986d5ec7c --- /dev/null +++ b/demos/ARM7-AT91SAM7X-LWIP-GCC/readme.txt @@ -0,0 +1,28 @@ +***************************************************************************** +** ChibiOS/RT port for ARM7TDMI AT91SAM7X256. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex SAM7-EX256 board. + +** The Demo ** + +The demo currently just flashes the LCD background using a thread. +The button SW1 prints an "Hello World!" string on COM1, the button SW2 +activates che ChibiOS/RT test suite, output on COM1. + +** Build Procedure ** + +The demo was built using the YAGARTO toolchain but any toolchain based on GCC +and GNU userspace programs will work. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are Atmel copyright +and are licensed under a different license, see the header present in all the +source files under ./demos/AT91SAM7X256/at91lib for details. +Also note that not all the files present in the Atmel library are distribuited +with ChibiOS/RT, you can find the whole library on the Atmel web site: + + http://www.atmel.com -- cgit v1.2.3