1 files changed, 84 insertions, 0 deletions
diff --git a/testhal/LPC122x/IRQ_STORM/mcuconf.h b/testhal/LPC122x/IRQ_STORM/mcuconf.h
new file mode 100644
index 000000000..4aa37b83c
--- /dev/null
+++ b/testhal/LPC122x/IRQ_STORM/mcuconf.h
@@ -0,0 +1,84 @@
+/*
+    LPC122x - Copyright (C) 2013 Marcin Jokel
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * LPC1227 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0        Lowest...highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define LPC122x_PLLCLK_SOURCE               SYSPLLCLKSEL_SYSOSC
+#define LPC122x_SYSPLL_MUL                  3
+#define LPC122x_SYSPLL_DIV                  8
+#define LPC122x_MAINCLK_SOURCE              SYSMAINCLKSEL_PLLOUT
+#define LPC122x_SYSABHCLK_DIV               1
+
+/*
+ * ADC driver system settings.
+ */
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * GPT driver system settings.
+ */
+#define LPC122x_GPT_USE_CT16B0              TRUE
+#define LPC122x_GPT_USE_CT16B1              TRUE
+#define LPC122x_GPT_USE_CT32B0              TRUE
+#define LPC122x_GPT_USE_CT32B1              TRUE
+#define LPC122x_GPT_CT16B0_IRQ_PRIORITY     1
+#define LPC122x_GPT_CT16B1_IRQ_PRIORITY     3
+#define LPC122x_GPT_CT32B0_IRQ_PRIORITY     2
+#define LPC122x_GPT_CT32B1_IRQ_PRIORITY     2
+
+/*
+ * PWM driver system settings.
+ */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define LPC122x_SERIAL_USE_UART0            TRUE
+#define LPC122x_SERIAL_FIFO_PRELOAD         16
+#define LPC122x_SERIAL_UART0CLKDIV          1
+#define LPC122x_SERIAL_UART0_IRQ_PRIORITY   3
+#define LPC122x_SERIAL_TXD0_SELECTOR        TXD0_IS_PIO0_2
+#define LPC122x_SERIAL_RXD0_SELECTOR        RXD0_IS_PIO0_1
+
+#define LPC122x_SERIAL_USE_UART1            FALSE
+#define LPC122x_SERIAL_FIFO_PRELOAD         16
+#define LPC122x_SERIAL_UART1CLKDIV          1
+#define LPC122x_SERIAL_UART1_IRQ_PRIORITY   3
+#define LPC122x_SERIAL_RXD1_SELECTOR        RXD1_IS_PIO0_8
+#define LPC122x_SERIAL_TXD1_SELECTOR        TXD1_IS_PIO0_9
+
+/*
+ * SPI driver system settings.
+ */
+#define LPC122x_SPI_USE_SSP0                TRUE
+#define LPC122x_SPI_SSP0CLKDIV              1
+#define LPC122x_SPI_SSP0_IRQ_PRIORITY       1
+#define LPC122x_SPI_SSP_ERROR_HOOK(spip)    chSysHalt()