1 files changed, 23 insertions, 0 deletions
diff --git a/demos/AVR-Arduino-GCC/readme.txt b/demos/AVR-Arduino-GCC/readme.txt
new file mode 100644
index 000000000..124b6aa92
--- /dev/null
+++ b/demos/AVR-Arduino-GCC/readme.txt
@@ -0,0 +1,23 @@
+*****************************************************************************
+** ChibiOS/RT demo for Atmel AVR ATmega328.                                **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino board with an ATmega328 MCU in it, eg. the Arduino 
+Uno or Duemilanove.
+
+** The Demo **
+
+The demo prints the "Hello world" on Serial0, which is available on the board
+USB connector, and toggles the LED on PB5 (pin 13 on Arduino IDE) every second.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
+
+** Notes **
+
+This demo can be programmed onto the Arduino while leaving the Arduino bootloader
+in place. This means that the programming can be done through the USB connector
+as well.