diff options
| -rw-r--r-- | os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h | 1 | ||||
| -rw-r--r-- | os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h | 1 | ||||
| -rw-r--r-- | os/hal/ports/TIVA/LLD/ADC/driver.mk | 9 | ||||
| -rw-r--r-- | os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c | 351 | ||||
| -rw-r--r-- | os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h | 230 | ||||
| -rw-r--r-- | os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h | 2 | ||||
| -rw-r--r-- | os/hal/ports/TIVA/TM4C123x/platform.mk | 1 | ||||
| -rw-r--r-- | os/hal/ports/TIVA/TM4C129x/platform.mk | 1 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/.cproject | 68 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/.project | 101 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/Makefile | 220 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/chconf.h | 509 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch | 10 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/debug/TM4C123x-ADC (OpenOCD, Flash and Run).launch | 52 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/halconf.h | 294 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/main.c | 165 | ||||
| -rw-r--r-- | testhal/TIVA/TM4C123x/ADC/mcuconf.h | 179 |
17 files changed, 2193 insertions, 1 deletions
diff --git a/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h b/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h index d2693b0..7c40591 100644 --- a/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h +++ b/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h @@ -114,6 +114,7 @@ typedef int IRQn_Type; #include "inc/hw_ssi.h" #include "inc/hw_udma.h" #include "inc/hw_pwm.h" +#include "inc/hw_adc.h" #if CORTEX_NUM_VECTORS != ((((NUM_INTERRUPTS - 16) + 7) / 8) * 8) #error "TivaWare NUM_INTERRUPTS mismatch" diff --git a/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h b/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h index b73032b..7bf68a0 100644 --- a/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h +++ b/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h @@ -99,6 +99,7 @@ typedef int IRQn_Type; #include "inc/hw_ssi.h" #include "inc/hw_udma.h" #include "inc/hw_pwm.h" +#include "inc/hw_adc.h" #if CORTEX_NUM_VECTORS != ((((NUM_INTERRUPTS - 16) + 7) / 8) * 8) #error "TivaWare NUM_INTERRUPTS mismatch" diff --git a/os/hal/ports/TIVA/LLD/ADC/driver.mk b/os/hal/ports/TIVA/LLD/ADC/driver.mk new file mode 100644 index 0000000..5a1c80b --- /dev/null +++ b/os/hal/ports/TIVA/LLD/ADC/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_ADC TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC diff --git a/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c new file mode 100644 index 0000000..6c1be30 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c @@ -0,0 +1,351 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file hal_adc_lld.c + * @brief PLATFORM ADC subsystem low level driver source. + * + * @addtogroup ADC + * @{ + */ + +#include "hal.h" + +#if (HAL_USE_ADC == TRUE) || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief ADC0 driver identifier.*/ +#if TIVA_ADC_USE_ADC0 || defined(__DOXYGEN__) +ADCDriver ADCD1; +#endif + +/** @brief ADC1 driver identifier.*/ +#if TIVA_ADC_USE_ADC1 || defined(__DOXYGEN__) +ADCDriver ADCD2; +#endif + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief Common IRQ handler. + * + * @param[in] adcp pointer to the @p ADCDriver object + */ +static void serve_interrupt(ADCDriver *adcp) +{ + tiva_udma_table_entry_t *pri = &udmaControlTable.primary[adcp->dmanr]; + tiva_udma_table_entry_t *alt = &udmaControlTable.alternate[adcp->dmanr]; + + if ((pri->chctl & UDMA_CHCTL_XFERMODE_M) == UDMA_CHCTL_XFERMODE_STOP) { + /* Primary is used only for circular transfers */ + if (adcp->grpp->circular) { + if (adcp->depth > 1) { + _adc_isr_half_code(adcp); + } + + /* Reconfigure DMA for new lower half transfer */ + pri->chctl = adcp->prictl; + } + } + + if ((alt->chctl & UDMA_CHCTL_XFERMODE_M) == UDMA_CHCTL_XFERMODE_STOP) { + /* Alternate is used for both linear and circular transfers */ + _adc_isr_full_code(adcp); + + if (adcp->grpp->circular) { + /* Reconfigure DMA for new upper half transfer */ + alt->chctl = adcp->altctl; + } + } +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +#if TIVA_ADC_USE_ADC0 +/** + * @brief ADC0 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_ADC0_SEQ0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + serve_interrupt(&ADCD1); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_ADC_USE_ADC1 +/** + * @brief ADC1 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_ADC1_SEQ0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + serve_interrupt(&ADCD2); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level ADC driver initialization. + * + * @notapi + */ +void adc_lld_init(void) +{ +#if TIVA_ADC_USE_ADC0 + /* Driver initialization.*/ + adcObjectInit(&ADCD1); + ADCD1.adc = ADC0_BASE; + ADCD1.dmanr = TIVA_ADC_ADC0_SS0_UDMA_CHANNEL; + ADCD1.chnmap = TIVA_ADC_ADC0_SS0_UDMA_MAPPING; +#endif + +#if TIVA_ADC_USE_ADC1 + /* Driver initialization.*/ + adcObjectInit(&ADCD2); + ADCD2.adc = ADC1_BASE; + ADCD2.dmanr = TIVA_ADC_ADC1_SS0_UDMA_CHANNEL; + ADCD2.chnmap = TIVA_ADC_ADC1_SS0_UDMA_MAPPING; +#endif +} + +/** + * @brief Configures and activates the ADC peripheral. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_start(ADCDriver *adcp) +{ + if (adcp->state == ADC_STOP) { + /* Enables the peripheral.*/ +#if TIVA_ADC_USE_ADC0 + if (&ADCD1 == adcp) { + bool b; + b = udmaChannelAllocate(adcp->dmanr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCADC) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRADC) & (1 << 0))) + ; + + /* Only sequencer 0 is supported */ + nvicEnableVector(TIVA_ADC0_SEQ0_NUMBER, TIVA_ADC0_SEQ0_PRIORITY); + } +#endif + +#if TIVA_ADC_USE_ADC1 + if (&ADCD2 == adcp) { + bool b; + b = udmaChannelAllocate(adcp->dmanr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCADC) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRADC) & (1 << 1))) + ; + + /* Only sequencer 0 is supported */ + nvicEnableVector(TIVA_ADC1_SEQ0_NUMBER, TIVA_ADC1_SEQ0_PRIORITY); + } +#endif + + HWREG(UDMA_CHMAP0 + (adcp->dmanr / 8) * 4) |= (adcp->chnmap << (adcp->dmanr % 8)); + } +} + +/** + * @brief Deactivates the ADC peripheral. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_stop(ADCDriver *adcp) +{ + if (adcp->state == ADC_READY) { + /* Resets the peripheral.*/ + + udmaChannelRelease(adcp->dmanr); + + /* Disables the peripheral.*/ +#if TIVA_ADC_USE_ADC0 + if (&ADCD1 == adcp) { + nvicDisableVector(TIVA_ADC0_SEQ0_NUMBER); + } +#endif + +#if TIVA_ADC_USE_ADC1 + if (&ADCD2 == adcp) { + nvicDisableVector(TIVA_ADC1_SEQ0_NUMBER); + } +#endif + } +} + +/** + * @brief Starts an ADC conversion. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_start_conversion(ADCDriver *adcp) +{ + uint32_t adc = adcp->adc; + tiva_udma_table_entry_t *primary = &udmaControlTable.primary[adcp->dmanr]; + tiva_udma_table_entry_t *alternate = &udmaControlTable.alternate[adcp->dmanr]; + + /* Disable sample sequencer 0 */ + HWREG(adc + ADC_O_ACTSS) &= (1 << 0); + + /* Configure the sample sequencer 0 trigger */ + HWREG(adc + ADC_O_EMUX) = adcp->grpp->emux & 0xff; + + /* If pwm is used as trigger, select in which block the pwm generator is + located */ + if (adcp->grpp->emux >= 6 && adcp->grpp->emux <= 9) { + HWREG(adc + ADC_O_TSSEL) = 0; + } + + /* For each sample in the sample sequencer, select the input source */ + HWREG(adc + ADC_O_SSMUX0) = adcp->grpp->ssmux; + + /* Configure the sample control bits */ + HWREG(adc + ADC_O_SSCTL0) = adcp->grpp->ssctl | 0x44444444; /* Enforce IEn bits */ + + /* Alternate source endpoint is the same for all transfers */ + alternate->srcendp = (void *)(adcp->adc + ADC_O_SSFIFO0); + + /* Configure DMA */ + if ((adcp->grpp->circular) && (adcp->depth > 1)) { + /* Configure DMA in ping-pong mode. + Ping (1st half) is configured in the primary control structure. + Pong (2nd half) is configured in the alternate control structure. */ + + uint32_t ctl; + + /* configure the primary source endpoint */ + primary->srcendp = (void *)(adcp->adc + ADC_O_SSFIFO0); + + /* sample buffer is split in half, the upper half is used here */ + primary->dstendp = (void *)(adcp->samples + + (adcp->grpp->num_channels * adcp->depth / 2) - 1); + /* the lower half is used here */ + alternate->dstendp = (void *)(adcp->samples + + (adcp->grpp->num_channels * adcp->depth) - 1); + + ctl = UDMA_CHCTL_DSTSIZE_32 | UDMA_CHCTL_DSTINC_32 | + UDMA_CHCTL_SRCSIZE_32 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_1 | + UDMA_CHCTL_XFERSIZE(adcp->grpp->num_channels * adcp->depth / 2) | + UDMA_CHCTL_XFERMODE_PINGPONG; + + adcp->prictl = ctl; + adcp->altctl = ctl; + + dmaChannelPrimary(adcp->dmanr); + } + else { + /* Configure the DMA in basic mode. + This is used for both circular buffers with a depth of 1 and linear + buffers.*/ + alternate->dstendp = (void *)(adcp->samples + + (adcp->grpp->num_channels * adcp->depth) - 1); + adcp->prictl = UDMA_CHCTL_XFERMODE_STOP; + adcp->altctl = UDMA_CHCTL_DSTSIZE_32 | UDMA_CHCTL_DSTINC_32 | + UDMA_CHCTL_SRCSIZE_32 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_1 | + UDMA_CHCTL_XFERSIZE(adcp->grpp->num_channels * adcp->depth) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelAlternate(adcp->dmanr); + } + + /* Configure primary and alternate channel control fields */ + primary->chctl = adcp->prictl; + alternate->chctl = adcp->altctl; + + /* Configure DMA channel */ + dmaChannelBurstOnly(adcp->dmanr); + dmaChannelPriorityDefault(adcp->dmanr); + dmaChannelEnableRequest(adcp->dmanr); + + /* Enable DMA channel */ + dmaChannelEnable(adcp->dmanr); + + /* Enable the sample sequencer */ + HWREG(adc + ADC_O_ACTSS) |= (1 << 0); + + /* Enable DMA on the sample sequencer, is this for 129x only?*/ + //HWREG(adc + ADC_O_ACTSS) |= (1 << 8); + + /* Start conversion if configured for CPU trigger */ + if ((adcp->grpp->emux & 0xff) == 0) { + HWREG(adc + ADC_O_PSSI) = ADC_PSSI_SS0; + } +} + +/** + * @brief Stops an ongoing conversion. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_stop_conversion(ADCDriver *adcp) +{ + uint32_t adc = adcp->adc; + + /* Stop ongoing DMA transfer */ + dmaChannelDisable(adcp->dmanr); + + /* Stop ongoing ADC conversion by disabling the active sample sequencer */ + HWREG(adc + ADC_O_ACTSS) &= ~(1 << 0); +} + +#endif /* HAL_USE_ADC == TRUE */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h new file mode 100644 index 0000000..81916b8 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h @@ -0,0 +1,230 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file hal_adc_lld.h + * @brief PLATFORM ADC subsystem low level driver header. + * + * @addtogroup ADC + * @{ + */ + +#ifndef HAL_ADC_LLD_H +#define HAL_ADC_LLD_H + +#if (HAL_USE_ADC == TRUE) || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name PLATFORM configuration options + * @{ + */ +/** + * @brief ADC1 driver enable switch. + * @details If set to @p TRUE the support for ADC1 is included. + * @note The default is @p FALSE. + */ +#if !defined(PLATFORM_ADC_USE_ADC1) || defined(__DOXYGEN__) +#define PLATFORM_ADC_USE_ADC1 FALSE +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if !defined(TIVA_UDMA_REQUIRED) +#define TIVA_UDMA_REQUIRED +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief ADC sample data type. + */ +typedef uint32_t adcsample_t; + +/** + * @brief Channels number in a conversion group. + */ +typedef uint16_t adc_channels_num_t; + +/** + * @brief Possible ADC failure causes. + * @note Error codes are architecture dependent and should not relied + * upon. + */ +typedef enum { + ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */ + ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */ + ADC_ERR_AWD = 2 /**< Analog watchdog triggered. */ +} adcerror_t; + +/** + * @brief Type of a structure representing an ADC driver. + */ +typedef struct ADCDriver ADCDriver; + +/** + * @brief ADC notification callback type. + * + * @param[in] adcp pointer to the @p ADCDriver object triggering the + * callback + * @param[in] buffer pointer to the most recent samples data + * @param[in] n number of buffer rows available starting from @p buffer + */ +typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n); + +/** + * @brief ADC error callback type. + * + * @param[in] adcp pointer to the @p ADCDriver object triggering the + * callback + * @param[in] err ADC error code + */ +typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err); + +/** + * @brief Conversion group configuration structure. + * @details This implementation-dependent structure describes a conversion + * operation. + * @note The use of this configuration structure requires knowledge of + * PLATFORM ADC cell registers interface, please refer to the PLATFORM + * reference manual for details. + */ +typedef struct { + /** + * @brief Enables the circular buffer mode for the group. + */ + bool circular; + /** + * @brief Number of the analog channels belonging to the conversion group. + */ + adc_channels_num_t num_channels; + /** + * @brief Callback function associated to the group or @p NULL. + */ + adccallback_t end_cb; + /** + * @brief Error callback or @p NULL. + */ + adcerrorcallback_t error_cb; + /* End of the mandatory fields.*/ + uint32_t emux; + uint32_t ssmux; + uint32_t ssctl; +} ADCConversionGroup; + +/** + * @brief Driver configuration structure. + * @note It could be empty on some architectures. + */ +typedef struct { + uint32_t dummy; +} ADCConfig; + +/** + * @brief Structure representing an ADC driver. + */ +struct ADCDriver { + /** + * @brief Driver state. + */ + adcstate_t state; + /** + * @brief Current configuration data. + */ + const ADCConfig *config; + /** + * @brief Current samples buffer pointer or @p NULL. + */ + adcsample_t *samples; + /** + * @brief Current samples buffer depth or @p 0. + */ + size_t depth; + /** + * @brief Current conversion group pointer or @p NULL. + */ + const ADCConversionGroup *grpp; +#if (ADC_USE_WAIT == TRUE) || defined(__DOXYGEN__) + /** + * @brief Waiting thread. + */ + thread_reference_t thread; +#endif +#if (ADC_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the peripheral. + */ + mutex_t mutex; +#endif +#if defined(ADC_DRIVER_EXT_FIELDS) + ADC_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the ADC registers block. + */ + uint32_t adc; + uint8_t dmanr; + uint8_t chnmap; + uint32_t prictl; + uint32_t altctl; +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if TIVA_ADC_USE_ADC0 && !defined(__DOXYGEN__) +extern ADCDriver ADCD1; +#endif + +#if TIVA_ADC_USE_ADC1 && !defined(__DOXYGEN__) +extern ADCDriver ADCD2; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void adc_lld_init(void); + void adc_lld_start(ADCDriver *adcp); + void adc_lld_stop(ADCDriver *adcp); + void adc_lld_start_conversion(ADCDriver *adcp); + void adc_lld_stop_conversion(ADCDriver *adcp); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_ADC == TRUE */ + +#endif /* HAL_ADC_LLD_H */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h b/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h index cf90399..a473f6c 100644 --- a/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h +++ b/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h @@ -32,7 +32,7 @@ /** * @brief CHCTL XFERSIZE helper. */ -#define UDMA_CHCTL_XFERSIZE(n) ((n-1) << 4) +#define UDMA_CHCTL_XFERSIZE(n) (((n)-1) << 4) /*===========================================================================*/ /* Driver pre-compile time settings. */ diff --git a/os/hal/ports/TIVA/TM4C123x/platform.mk b/os/hal/ports/TIVA/TM4C123x/platform.mk index 2544696..de482d0 100644 --- a/os/hal/ports/TIVA/TM4C123x/platform.mk +++ b/os/hal/ports/TIVA/TM4C123x/platform.mk @@ -11,6 +11,7 @@ HALCONF := $(strip $(shell cat halconf.h | egrep -e "\#define")) endif # Drivers compatible with the platform. +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/driver.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO/driver.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/driver.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C/driver.mk diff --git a/os/hal/ports/TIVA/TM4C129x/platform.mk b/os/hal/ports/TIVA/TM4C129x/platform.mk index fb2dc4a..8e4c9fa 100644 --- a/os/hal/ports/TIVA/TM4C129x/platform.mk +++ b/os/hal/ports/TIVA/TM4C129x/platform.mk @@ -11,6 +11,7 @@ HALCONF := $(strip $(shell cat halconf.h | egrep -e "\#define")) endif # Drivers compatible with the platform. +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/driver.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO/driver.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/driver.mk include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C/driver.mk diff --git a/testhal/TIVA/TM4C123x/ADC/.cproject b/testhal/TIVA/TM4C123x/ADC/.cproject new file mode 100644 index 0000000..c62a6c8 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/.cproject @@ -0,0 +1,68 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="0.114656749"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> + <folderInfo id="0.114656749." name="/" resourcePath=""> + <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> + <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/> + <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.972953796" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.959676881" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1617159785" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + </toolChain> + </folderInfo> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="TM4C123x-ADC.null.1703860681" name="TM4C123x-ADC"/> + </storageModule> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <scannerConfigBuildInfo instanceId="0.114656749"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> + <storageModule moduleId="refreshScope"/> +</cproject> diff --git a/testhal/TIVA/TM4C123x/ADC/.project b/testhal/TIVA/TM4C123x/ADC/.project new file mode 100644 index 0000000..031d7e5 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/.project @@ -0,0 +1,101 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>TM4C123x-ADC</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> + <triggers>clean,full,incremental,</triggers> + <arguments> + <dictionary> + <key>?name?</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.append_environment</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.autoBuildTarget</key> + <value>all</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildArguments</key> + <value>-j1</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildCommand</key> + <value>make</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.cleanBuildTarget</key> + <value>clean</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.contents</key> + <value>org.eclipse.cdt.make.core.activeConfigSettings</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableAutoBuild</key> + <value>false</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableCleanBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableFullBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.fullBuildTarget</key> + <value>all</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.stopOnError</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> + <value>true</value> + </dictionary> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> + <triggers>full,incremental,</triggers> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + </natures> + <linkedResources> + <link> + <name>board</name> + <type>2</type> + <locationURI>PARENT-1-CHIBIOS/ChibiOS-Contrib/os/hal/boards/TI_TM4C123G_LAUNCHPAD</locationURI> + </link> + <link> + <name>community_os</name> + <type>2</type> + <locationURI>PARENT-1-CHIBIOS/ChibiOS-Contrib/os</locationURI> + </link> + <link> + <name>os</name> + <type>2</type> + <locationURI>CHIBIOS/os</locationURI> + </link> + </linkedResources> + <variableList> + <variable> + <name>CHIBIOS3</name> + <value>file:/C:/ChibiStudio/chibios3</value> + </variable> + </variableList> +</projectDescription> diff --git a/testhal/TIVA/TM4C123x/ADC/Makefile b/testhal/TIVA/TM4C123x/ADC/Makefile new file mode 100644 index 0000000..15ea309 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/Makefile @@ -0,0 +1,220 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = hard +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/os/hal/lib/streams/streams.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/TIVA/TM4C123x/ADC/chconf.h b/testhal/TIVA/TM4C123x/ADC/chconf.h new file mode 100644 index 0000000..25e39f6 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/chconf.h @@ -0,0 +1,509 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** + * @brief Realtime Counter frequency. + * @details Frequency of the system counter used for realtime delays and + * measurements. + */ +#define CH_CFG_RTC_FREQUENCY 80000000 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch new file mode 100644 index 0000000..0af6b44 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> +<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> +<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> +</listAttribute> +<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> +<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> +<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> +<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> +</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/ADC/debug/TM4C123x-ADC (OpenOCD, Flash and Run).launch b/testhal/TIVA/TM4C123x/ADC/debug/TM4C123x-ADC (OpenOCD, Flash and Run).launch new file mode 100644 index 0000000..c3a5d9f --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/debug/TM4C123x-ADC (OpenOCD, Flash and Run).launch @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> +<stringAttribute key="bad_container_name" value="\TM4C123x-ADC\debug"/> +<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="monitor reset halt monitor reset init"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/> +<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> +<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/> +<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> +<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="dmachis-spi_serve_interrupt-(format)" val="0"/></contentList>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="TM4C123x-ADC"/> +<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/TM4C123x-ADC"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> +<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/> +</listAttribute> +</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/ADC/halconf.h b/testhal/TIVA/TM4C123x/ADC/halconf.h new file mode 100644 index 0000000..20f0e46 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/halconf.h @@ -0,0 +1,294 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/TIVA/TM4C123x/ADC/main.c b/testhal/TIVA/TM4C123x/ADC/main.c new file mode 100644 index 0000000..cbb7362 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/main.c @@ -0,0 +1,165 @@ +/* + Copyright (C) 2014..2016 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" +#include "chprintf.h" + +#define ADC_GRP1_NUM_CHANNELS 2 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +uint32_t temp = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + + uint8_t i, j; + adcsample_t avg = 0; + + for (j = 0; j < n; j++) { + for (i = 0; i < ADC_GRP2_NUM_CHANNELS; i++) { + avg += *buffer++; + } + } + + avg /= (n * ADC_GRP2_NUM_CHANNELS); + + temp = (uint32_t)(147.5f - ((75.0f * 3.3f * (float)avg)) / 4096.0f); + } + else { + ny += n; + + uint8_t i, j; + adcsample_t avg = 0; + + for (j = 0; j < n; j++) { + for (i = 0; i < ADC_GRP2_NUM_CHANNELS; i++) { + avg += *buffer++; + } + } + + avg /= (n * ADC_GRP2_NUM_CHANNELS); + + temp = (uint32_t)(147.5f - ((75.0f * 3.3f * (float)avg)) / 4096.0f); + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 2 channels, Always triggered. + * Channels: TS, TS. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + 0xF, /* EMUX */ /* Always trigger */ + 0, /* SSMUX */ + (1 << 7) | (1 << 5) | + (1 << 3) /* SSCTL */ /* 2 times TS, 2nd has end bit set */ +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, Always triggered. + * Channels: TS, TS, TS, TS, TS, TS, TS, TS. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0xF, /* EMUX */ /* Always trigger */ + 0, /* SSMUX */ + (1 << 31) | (1 << 29) | + (1 << 27) | + (1 << 23) | + (1 << 19) | + (1 << 15) | + (1 << 11) | + (1 << 7) | + (1 << 3) /* SSCTL */ /* 8 times TS, 8th has end bit set */ +}; + +/* + * Application entry point. + */ +int main(void) +{ + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* Configure RX and TX pins for UART0.*/ + palSetLineMode(LINE_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); + palSetLineMode(LINE_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); + + sdStart(&SD1, NULL); + + chprintf((BaseSequentialStream *)&SD1, "Starting ADC0..."); + chThdSleepMilliseconds(500); + + /* + * Activates the ADC0 driver. + */ + adcStart(&ADCD1, NULL); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity + */ + while (TRUE) { + chThdSleepMilliseconds(500); + + chprintf((BaseSequentialStream *)&SD1, "A:%d\tB:%d\ttmp:%d\r\n", nx, ny, temp); + } + + return 0; +} diff --git a/testhal/TIVA/TM4C123x/ADC/mcuconf.h b/testhal/TIVA/TM4C123x/ADC/mcuconf.h new file mode 100644 index 0000000..02d79d6 --- /dev/null +++ b/testhal/TIVA/TM4C123x/ADC/mcuconf.h @@ -0,0 +1,179 @@ +/* + Copyright (C) 2014..2016 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * TM4C123x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 7...0 Lowest...Highest. + */ + +#define TM4C123x_MCUCONF + +/* + * HAL driver system settings. + */ +#define TIVA_OSCSRC SYSCTL_RCC2_OSCSRC2_MO +#define TIVA_MOSC_ENABLE TRUE +#define TIVA_DIV400_VALUE 1 +#define TIVA_SYSDIV_VALUE 2 +#define TIVA_USESYSDIV_ENABLE FALSE +#define TIVA_SYSDIV2LSB_ENABLE FALSE +#define TIVA_BYPASS_VALUE 0 +#define TIVA_PWM_FIELDS (SYSCTL_RCC_USEPWMDIV | \ + SYSCTL_RCC_PWMDIV_8) + +/* + * ADC driver system settings. + */ +#define TIVA_ADC_USE_ADC0 TRUE +#define TIVA_ADC_USE_ADC1 TRUE +#define TIVA_ADC_ADC0_SS0_UDMA_CHANNEL 14 +#define TIVA_ADC_ADC1_SS0_UDMA_CHANNEL 24 +#define TIVA_ADC_ADC0_SS0_UDMA_MAPPING 0 +#define TIVA_ADC_ADC1_SS0_UDMA_MAPPING 1 +#define TIVA_ADC0_SEQ0_PRIORITY 4 +#define TIVA_ADC1_SEQ0_PRIORITY 4 +/* + * GPIO driver system settings. + */ +#define TIVA_GPIO_GPIOA_USE_AHB TRUE +#define TIVA_GPIO_GPIOB_USE_AHB TRUE +#define TIVA_GPIO_GPIOC_USE_AHB TRUE +#define TIVA_GPIO_GPIOD_USE_AHB TRUE +#define TIVA_GPIO_GPIOE_USE_AHB TRUE +#define TIVA_GPIO_GPIOF_USE_AHB TRUE + +/* + * GPT driver system settings. + */ +#define TIVA_GPT_USE_GPT0 FALSE +#define TIVA_GPT_USE_GPT1 FALSE +#define TIVA_GPT_USE_GPT2 FALSE +#define TIVA_GPT_USE_GPT3 FALSE +#define TIVA_GPT_USE_GPT4 FALSE +#define TIVA_GPT_USE_GPT5 FALSE +#define TIVA_GPT_USE_WGPT0 FALSE +#define TIVA_GPT_USE_WGPT1 FALSE +#define TIVA_GPT_USE_WGPT2 FALSE +#define TIVA_GPT_USE_WGPT3 FALSE +#define TIVA_GPT_USE_WGPT4 FALSE +#define TIVA_GPT_USE_WGPT5 FALSE + +#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define TIVA_I2C_USE_I2C0 FALSE +#define TIVA_I2C_USE_I2C1 FALSE +#define TIVA_I2C_USE_I2C2 FALSE +#define TIVA_I2C_USE_I2C3 FALSE +#define TIVA_I2C_USE_I2C4 FALSE +#define TIVA_I2C_USE_I2C5 FALSE +#define TIVA_I2C_USE_I2C6 FALSE +#define TIVA_I2C_USE_I2C7 FALSE +#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 + +/* + * PWM driver system settings. + */ +#define TIVA_PWM_USE_PWM0 FALSE +#define TIVA_PWM_USE_PWM1 FALSE +#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 + +/* + * SERIAL driver system settings. + */ +#define TIVA_SERIAL_USE_UART0 TRUE +#define TIVA_SERIAL_USE_UART1 FALSE +#define TIVA_SERIAL_USE_UART2 FALSE +#define TIVA_SERIAL_USE_UART3 FALSE +#define TIVA_SERIAL_USE_UART4 FALSE +#define TIVA_SERIAL_USE_UART5 FALSE +#define TIVA_SERIAL_USE_UART6 FALSE +#define TIVA_SERIAL_USE_UART7 FALSE +#define TIVA_SERIAL_UART0_PRIORITY 5 +#define TIVA_SERIAL_UART1_PRIORITY 5 +#define TIVA_SERIAL_UART2_PRIORITY 5 +#define TIVA_SERIAL_UART3_PRIORITY 5 +#define TIVA_SERIAL_UART4_PRIORITY 5 +#define TIVA_SERIAL_UART5_PRIORITY 5 +#define TIVA_SERIAL_UART6_PRIORITY 5 +#define TIVA_SERIAL_UART7_PRIORITY 5 + +/* + * SPI driver system settings. + */ +#define TIVA_SPI_USE_SSI0 TRUE +#define TIVA_SPI_USE_SSI1 FALSE +#define TIVA_SPI_USE_SSI2 FALSE +#define TIVA_SPI_USE_SSI3 FALSE +#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 +#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 +#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 +#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 +#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 +#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 +#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 +#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 +#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 +#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 +#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 +#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 + +/* + * ST driver system settings. + */ +#define TIVA_ST_IRQ_PRIORITY 2 +#define TIVA_ST_USE_WIDE_TIMER TRUE +#define TIVA_ST_TIMER_NUMBER 5 +#define TIVA_ST_TIMER_LETTER A |