summaryrefslogtreecommitdiffstats
path: root/firmware/bootloaderconfig.h
Commit message (Collapse)AuthorAgeFilesLines
* firmware: Added configuration folderscpldcpu2014-03-161-253/+0
|
* firmware: move device configureation to header filecpldcpu2014-03-061-2/+10
|
* firmware: Extend timeout with any USB traffic, set timeout to 6scpldcpu2014-03-061-1/+1
| | | | fixed weird bug with USB3.0 hub where MN is only recognized after 5s
* firmware: clean up configuration filecpldcpu2014-02-211-141/+87
|
* firmware: increase led speedcpldcpu2014-02-201-2/+2
|
* firmware: fixed LEDcpldcpu2014-02-201-3/+4
|
* firmware: Adjusted tinyvectottablesize to support far jmpcpldcpu2014-02-181-3/+3
|
* firmware: added OSCCAL_HAVE_XTALcpldcpu2014-02-021-4/+9
|
* firmware: single buffer usbcpldcpu2014-01-061-1/+1
| | | | 1578 bytes, yay..
* firmware: reset vector patching in commandline toolcpldcpu2014-01-051-1/+1
|
* firmware: Removed trampoline and INT patchingcpldcpu2014-01-051-4/+2
|
* firmware: more global registers and unions typescpldcpu2013-12-311-0/+10
| | | | Saves 70(!) bytes or so..
* firmware: Directly mapped command register saves 12 btescpldcpu2013-12-311-1/+1
|
* firmware: switch saves 2 bytescpldcpu2013-12-291-1/+6
|
* firmware: code clean up, consolidated wait loops to save 4 bytescpldcpu2013-12-281-2/+2
|
* firmware: fixed descriptioncpldcpu2013-12-281-5/+6
|
* firmware: default is entry_always, kill warningcpldcpu2013-12-281-1/+1
|
* firmware: clean up entrymodecpldcpu2013-12-281-76/+82
|
* firmware: clean up LED codecpldcpu2013-12-281-4/+10
|
* firmware: move increment idlePolls to main againcpldcpu2013-12-281-4/+2
|
* firmware: we do not want function definition in a header file anywayscpldcpu2013-12-281-6/+0
|
* firmware: de-clutter bootloaderconfigcpldcpu2013-12-281-89/+25
|
* don't exit bootloader with clean memorycpldcpu2013-12-151-1/+1
|
* Release notes, hex files and readmecpldcpu2013-12-151-1/+1
|
* Disablescpldcpu2013-11-251-3/+3
|
* clean up, added LED, NO USB exit delaycpldcpu2013-11-251-37/+68
| | | | | | | Work towards v1.10 - Clean up bootloaderconfig.h - Included option for LED - Included second timout if no USB connected
* source code clean upcpldcpu2013-11-041-1/+1
|
* Updated USB Driver, nanite, oscalcpldcpu2013-11-041-2/+18
|
* Reduce accesses to global variable idlePollscpldcpu2013-10-071-1/+1
| | | | saves 8 bytes
* bug in jumper mode!!! jumper pin was set to output, creating short circuits! ↵Bluebie2013-05-201-38/+36
| | | | update asap!
* firmware: no functional change - reorganised bootloader config to easily ↵Bluebie2013-03-061-9/+33
| | | | switch on and off -jumper variant by uncommenting out a define near the top
* firmware: added osccal store and retrieve code, untestedBluebie2013-03-041-18/+20
|
* D5 version for deuxvisBluebie2013-02-081-1/+2
|
* experimental build with pin0 as boot button pinBluebie2013-02-081-16/+17
|
* revert timing to be like 1.02 - 5 sec wait, 8ms write delayBluebie2013-02-081-1/+1
|
* Change back to 2.5 sec bootloader delay - 2.0 seconds wasn't working ↵Bluebie2012-10-051-1/+1
| | | | reliably enough for my taste
* adjusted default duration down to 2.0 seconds from 2.5 secondsBluebie2012-10-051-1/+1
|
* Added low power mode, for chips which need to start with clkdiv8 and only ↵Bluebie2012-10-041-2/+14
| | | | switch to 16.5mhz when usb connection is detected somehow.
* Decreased bootloader wait from 5 secs to 2.5 secs (tested on win7 and Mac OS ↵Jenna Fox2012-10-031-1/+1
| | | | 10.8.2)
* Adding more comments mostly - no functional changesJenna Fox2012-09-261-18/+20
|
* Crammed bootloader up against the edge while keeping it aligned to a page (I ↵Jenna Fox2012-09-251-4/+4
| | | | hope!)
* fixing bugs which break compilationJenna Fox2012-09-231-18/+6
|
* Begin work to convert embedded-creations USBaspLoader-tiny85 port to bootloadHIDJenna Fox2012-09-231-0/+264
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 19:50:28 +0000