diff options
| -rw-r--r-- | firmware/usbdrv/usbdrv.c | 68 | ||||
| -rw-r--r-- | firmware/usbdrv/usbdrvasm165.inc | 7 |
2 files changed, 54 insertions, 21 deletions
diff --git a/firmware/usbdrv/usbdrv.c b/firmware/usbdrv/usbdrv.c index d838935..50adf5a 100644 --- a/firmware/usbdrv/usbdrv.c +++ b/firmware/usbdrv/usbdrv.c @@ -3,10 +3,25 @@ * Author: Christian Starkjohann * Creation Date: 2004-12-29 * Tabsize: 4 + * + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) */ +/* This copy of usbdrv.c was optimized to reduce the memory footprint with micronucleus V2 + * + * Changes: + * a) Replies to USB SETUP IN Packets are now only possible from Flash + * * Commented out routines to copy from SRAM + * * remove msgflag variable and all handling involving it + */ +#define MNHACK_ONLY_FLASH_MSGPTR +/* b) Do not use preinitialized global variables to avoid having to initialize + * the data section. + */ +#define MNHACK_NO_DATASECTION + #include "usbdrv.h" #include "oddebug.h" @@ -27,7 +42,11 @@ uchar usbConfiguration; /* currently selected configuration. Administere volatile schar usbRxLen; /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */ uchar usbCurrentTok; /* last token received or endpoint number for last OUT token if != 0 */ uchar usbRxToken; /* token for data we received; or endpont number for last OUT */ -volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */ +#ifdef MNHACK_NO_DATASECTION + volatile uchar usbTxLen; /* number of bytes to transmit with next IN token or handshake token */ +#else + volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */ +#endif uchar usbTxBuf[USB_BUFSIZE];/* data to transmit with next IN, free if usbTxLen contains handshake token */ #if USB_COUNT_SOF volatile uchar usbSofCount; /* incremented by assembler module every SOF */ @@ -44,8 +63,15 @@ uchar usbCurrentDataToken;/* when we check data toggling to ignore duplica /* USB status registers / not shared with asm code */ usbMsgPtr_t usbMsgPtr; /* data to transmit next -- ROM or RAM address */ -static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */ +#ifdef MNHACK_NO_DATASECTION + static usbMsgLen_t usbMsgLen; /* remaining number of bytes */ +#else + static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */ +#endif + +#ifndef MNHACK_ONLY_FLASH_MSGPTR static uchar usbMsgFlags; /* flag values see below */ +#endif #define USB_FLG_MSGPTR_IS_ROM (1<<6) #define USB_FLG_USE_USER_RW (1<<7) @@ -291,17 +317,18 @@ USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len) * This may cause problems with undefined symbols if compiled without * optimizing! */ -#define GET_DESCRIPTOR(cfgProp, staticName) \ - if(cfgProp){ \ - if((cfgProp) & USB_PROP_IS_RAM) \ - flags = 0; \ - if((cfgProp) & USB_PROP_IS_DYNAMIC){ \ - len = usbFunctionDescriptor(rq); \ - }else{ \ - len = USB_PROP_LENGTH(cfgProp); \ - usbMsgPtr = (usbMsgPtr_t)(staticName); \ - } \ - } + + #define GET_DESCRIPTOR(cfgProp, staticName) \ + if(cfgProp){ \ + if((cfgProp) & USB_PROP_IS_RAM) \ + flags = 0; \ + if((cfgProp) & USB_PROP_IS_DYNAMIC){ \ + len = usbFunctionDescriptor(rq); \ + }else{ \ + len = USB_PROP_LENGTH(cfgProp); \ + usbMsgPtr = (usbMsgPtr_t)(staticName); \ + } \ + } /* usbDriverDescriptor() is similar to usbFunctionDescriptor(), but used * internally for all types of descriptors. @@ -348,7 +375,9 @@ uchar flags = USB_FLG_MSGPTR_IS_ROM; len = usbFunctionDescriptor(rq); } SWITCH_END +#ifndef MNHACK_ONLY_FLASH_MSGPTR usbMsgFlags = flags; +#endif return len; } @@ -441,7 +470,9 @@ usbRequest_t *rq = (void *)data; usbMsgLen_t replyLen; usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */ usbTxLen = USBPID_NAK; /* abort pending transmit */ +#ifndef MNHACK_ONLY_FLASH_MSGPTR usbMsgFlags = 0; +#endif uchar type = rq->bmRequestType & USBRQ_TYPE_MASK; if(type != USBRQ_TYPE_STANDARD){ /* standard requests are handled by driver */ replyLen = usbFunctionSetup(data); @@ -499,18 +530,22 @@ static uchar usbDeviceRead(uchar *data, uchar len) { uchar i = len; usbMsgPtr_t r = usbMsgPtr; +#ifndef MNHACK_ONLY_FLASH_MSGPTR if(usbMsgFlags & USB_FLG_MSGPTR_IS_ROM){ /* ROM data */ +#endif do{ uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */ *data++ = c; r++; }while(--i); - }else{ /* RAM data */ +#ifndef MNHACK_ONLY_FLASH_MSGPTR + }else{ // RAM data do{ *data++ = *((uchar *)r); r++; }while(--i); } +#endif usbMsgPtr = r; } } @@ -609,6 +644,11 @@ isNotReset: USB_PUBLIC void usbInit(void) { +#ifdef MNHACK_NO_DATASECTION + usbTxLen = USBPID_NAK; + usbMsgLen = USB_NO_MSG; +#endif + #if USB_INTR_CFG_SET != 0 USB_INTR_CFG |= USB_INTR_CFG_SET; #endif diff --git a/firmware/usbdrv/usbdrvasm165.inc b/firmware/usbdrv/usbdrvasm165.inc index a6c76f6..1433701 100644 --- a/firmware/usbdrv/usbdrvasm165.inc +++ b/firmware/usbdrv/usbdrvasm165.inc @@ -36,12 +36,6 @@ of CPU cycles, but even an exact number of cycles! ; Numbers in brackets are clocks counted from center of last sync bit ; when instruction starts -; the code enabled by TINY85MODE is inteded only for use with the tiny85-compatible USBaspLoader -; project. -; with TINY85MODE set, the beginning of the ISR checks for a magic word "B007" at the very bottom of the stack -; and jumps to the application's ISR if the magic word isn't present -; the max allowable interrupt latency is lower given this additional code before getting to the -; USB-specific portion of the ISR. USB_INTR_VECTOR: ;order of registers pushed: YL, SREG [sofError], r0, YH, shift, x1, x2, x3, x4, cnt @@ -50,7 +44,6 @@ USB_INTR_VECTOR: push YL ; push only what is necessary to sync with edge ASAP in YL, SREG ; push YL ; - ;---------------------------------------------------------------------------- ; Synchronize with sync pattern: |