From a48212cb65e09669ed243581556529681cebba0a Mon Sep 17 00:00:00 2001 From: "iap10@labyrinth.cl.cam.ac.uk" Date: Mon, 24 Feb 2003 16:55:07 +0000 Subject: bitkeeper revision 1.93 (3e5a4e6bkPheUp3x1uufN2MS3LAB7A) Latest and Greatest version of XenoLinux based on the Linux-2.4.21-pre4 kernel. --- xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h | 376 +++++++++++++++++++++ 1 file changed, 376 insertions(+) create mode 100644 xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h (limited to 'xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h') diff --git a/xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h b/xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h new file mode 100644 index 0000000000..77a99d1ef0 --- /dev/null +++ b/xenolinux-2.4.21-pre4-sparse/include/asm-xeno/io.h @@ -0,0 +1,376 @@ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include +#include +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo + */ + +#define IO_SPACE_LIMIT 0xffff + +#define XQUAD_PORTIO_BASE 0xfe400000 +#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ +#define XQUAD_PORTIO_LEN 0x80000 /* Only remapping first 2 quads */ + +#ifdef __KERNEL__ + +#include + +/* + * Temporary debugging check to catch old code using + * unmapped ISA addresses. Will be removed in 2.4. + */ +#if CONFIG_DEBUG_IOVIRT + extern void *__io_virt_debug(unsigned long x, const char *file, int line); + extern unsigned long __io_phys_debug(unsigned long x, const char *file, int line); + #define __io_virt(x) __io_virt_debug((unsigned long)(x), __FILE__, __LINE__) +//#define __io_phys(x) __io_phys_debug((unsigned long)(x), __FILE__, __LINE__) +#else + #define __io_virt(x) ((void *)(x)) +//#define __io_phys(x) __pa(x) +#endif + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa(address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ + +static inline void * phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * Change "struct page" to physical address. + */ +#ifdef CONFIG_HIGHMEM64G +#define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT) +#else +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#endif + +/* + * IO bus memory addresses are also 1:1 with the physical address + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt +#define page_to_bus page_to_phys + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ + +#define readb(addr) (*(volatile unsigned char *) __io_virt(addr)) +#define readw(addr) (*(volatile unsigned short *) __io_virt(addr)) +#define readl(addr) (*(volatile unsigned int *) __io_virt(addr)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +#define writeb(b,addr) (*(volatile unsigned char *) __io_virt(addr) = (b)) +#define writew(b,addr) (*(volatile unsigned short *) __io_virt(addr) = (b)) +#define writel(b,addr) (*(volatile unsigned int *) __io_virt(addr) = (b)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define memset_io(a,b,c) __memset(__io_virt(a),(b),(c)) +#define memcpy_fromio(a,b,c) __memcpy((a),__io_virt(b),(c)) +#define memcpy_toio(a,b,c) __memcpy(__io_virt(a),(b),(c)) + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char *)(PAGE_OFFSET)) + +#define isa_readb(a) readb(__ISA_IO_base + (a)) +#define isa_readw(a) readw(__ISA_IO_base + (a)) +#define isa_readl(a) readl(__ISA_IO_base + (a)) +#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a)) +#define isa_writew(w,a) writew(w,__ISA_IO_base + (a)) +#define isa_writel(l,a) writel(l,__ISA_IO_base + (a)) +#define isa_memset_io(a,b,c) memset_io(__ISA_IO_base + (a),(b),(c)) +#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c)) +#define isa_memcpy_toio(a,b,c) memcpy_toio(__ISA_IO_base + (a),(b),(c)) + + +/* + * Again, i386 does not require mem IO specific function. + */ + +#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),__io_virt(b),(c),(d)) +#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),__io_virt(__ISA_IO_base + (b)),(c),(d)) + +/** + * check_signature - find BIOS signatures + * @io_addr: mmio address to check + * @signature: signature block + * @length: length of signature + * + * Perform a signature comparison with the mmio address io_addr. This + * address should have been obtained by ioremap. + * Returns 1 on a match. + */ + +static inline int check_signature(unsigned long io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +/** + * isa_check_signature - find BIOS signatures + * @io_addr: mmio address to check + * @signature: signature block + * @length: length of signature + * + * Perform a signature comparison with the ISA mmio address io_addr. + * Returns 1 on a match. + * + * This function is deprecated. New drivers should use ioremap and + * check_signature. + */ + + +static inline int isa_check_signature(unsigned long io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (isa_readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +/* + * Cache management + * + * This needed for two cases + * 1. Out of order aware processors + * 2. Accidentally out of order processors (PPro errata #51) + */ + +#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) + +static inline void flush_write_buffers(void) +{ + __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory"); +} + +#define dma_cache_inv(_start,_size) flush_write_buffers() +#define dma_cache_wback(_start,_size) flush_write_buffers() +#define dma_cache_wback_inv(_start,_size) flush_write_buffers() + +#else + +/* Nothing to do */ + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) +#define flush_write_buffers() + +#endif + +#endif /* __KERNEL__ */ + +#ifdef SLOW_IO_BY_JUMPING +#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:" +#else +#define __SLOW_DOWN_IO "\noutb %%al,$0x80" +#endif + +#ifdef REALLY_SLOW_IO +#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO +#else +#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO +#endif + +#ifdef CONFIG_MULTIQUAD +extern void *xquad_portio; /* Where the IO area was mapped */ +#endif /* CONFIG_MULTIQUAD */ + +/* + * Talk about misusing macros.. + */ +#define __OUT1(s,x) \ +static inline void out##s(unsigned x value, unsigned short port) { + +#define __OUT2(s,s1,s2) \ +__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1" + +#if defined (CONFIG_MULTIQUAD) && !defined(STANDALONE) +#define __OUTQ(s,ss,x) /* Do the equivalent of the portio op on quads */ \ +static inline void out##ss(unsigned x value, unsigned short port) { \ + if (xquad_portio) \ + write##s(value, (unsigned long) xquad_portio + port); \ + else /* We're still in early boot, running on quad 0 */ \ + out##ss##_local(value, port); \ +} \ +static inline void out##ss##_quad(unsigned x value, unsigned short port, int quad) { \ + if (xquad_portio) \ + write##s(value, (unsigned long) xquad_portio + (XQUAD_PORTIO_QUAD*quad)\ + + port); \ +} + +#define __INQ(s,ss) /* Do the equivalent of the portio op on quads */ \ +static inline RETURN_TYPE in##ss(unsigned short port) { \ + if (xquad_portio) \ + return read##s((unsigned long) xquad_portio + port); \ + else /* We're still in early boot, running on quad 0 */ \ + return in##ss##_local(port); \ +} \ +static inline RETURN_TYPE in##ss##_quad(unsigned short port, int quad) { \ + if (xquad_portio) \ + return read##s((unsigned long) xquad_portio + (XQUAD_PORTIO_QUAD*quad)\ + + port); \ + else\ + return 0;\ +} +#endif /* CONFIG_MULTIQUAD && !STANDALONE */ + +#if !defined(CONFIG_MULTIQUAD) || defined(STANDALONE) +#define __OUT(s,s1,x) \ +__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \ +__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} +#else +/* Make the default portio routines operate on quad 0 */ +#define __OUT(s,s1,x) \ +__OUT1(s##_local,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \ +__OUT1(s##_p_local,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \ +__OUTQ(s,s,x) \ +__OUTQ(s,s##_p,x) +#endif /* !CONFIG_MULTIQUAD || STANDALONE */ + +#define __IN1(s) \ +static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v; + +#define __IN2(s,s1,s2) \ +__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0" + +#if !defined(CONFIG_MULTIQUAD) || defined(STANDALONE) +#define __IN(s,s1,i...) \ +__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ +__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } +#else +/* Make the default portio routines operate on quad 0 */ +#define __IN(s,s1,i...) \ +__IN1(s##_local) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ +__IN1(s##_p_local) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ +__INQ(s,s) \ +__INQ(s,s##_p) +#endif /* !CONFIG_MULTIQUAD || STANDALONE */ + +#define __INS(s) \ +static inline void ins##s(unsigned short port, void * addr, unsigned long count) \ +{ __asm__ __volatile__ ("rep ; ins" #s \ +: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } + +#define __OUTS(s) \ +static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \ +{ __asm__ __volatile__ ("rep ; outs" #s \ +: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } + +#define RETURN_TYPE unsigned char +__IN(b,"") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned short +__IN(w,"") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned int +__IN(l,"") +#undef RETURN_TYPE + +__OUT(b,"b",char) +__OUT(w,"w",short) +__OUT(l,,int) + +__INS(b) +__INS(w) +__INS(l) + +__OUTS(b) +__OUTS(w) +__OUTS(l) + +#endif -- cgit v1.2.3