From a8992d62362e0755d3a1929b059769bc3343135d Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Fri, 13 Sep 2013 13:49:34 +0100 Subject: ARM: parse separate DT properties for different commandlines Currently we use the chosen/bootargs property as the Xen commandline and rely on xen,dom0-bootargs for Dom0. However this brings issues with bootloaders, which usually build bootargs by bootscripts for a Linux kernel - and not for the entirely different Xen hypervisor. Introduce a new possible device tree property "xen,xen-bootargs" explicitly for the Xen hypervisor and make the selection of which to use more fine grained: - If xen,xen-bootargs is present, it will be used for Xen. - If xen,dom0-bootargs is present, it will be used for Dom0. - If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is, bootargs will be used for Xen. Like the current situation. - If no Xen specific properties are present, bootargs is for Dom0. - If xen,xen-bootargs is present, but xen,dom0-bootargs is missing, bootargs will be used for Dom0. The aim is to allow common bootscripts to boot both Xen and native Linux with the same device tree blob. If needed, one could hard-code the Xen commandline into the DTB, leaving bootargs for Dom0 to be set by the (non Xen-aware) bootloader. I will send out a appropriate u-boot patch, which writes the content of the "xen_bootargs" environment variable into the xen,xen-bootargs dtb property. Signed-off-by: Andre Przywara Signed-off-by: Julien Grall Acked-by: Ian Campbell --- docs/misc/arm/device-tree/booting.txt | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/misc/arm/device-tree/booting.txt b/docs/misc/arm/device-tree/booting.txt index 94cd3f18a4..08ed775185 100644 --- a/docs/misc/arm/device-tree/booting.txt +++ b/docs/misc/arm/device-tree/booting.txt @@ -1,3 +1,6 @@ +Dom0 kernel and ramdisk modules +================================ + Xen is passed the dom0 kernel and initrd via a reference in the /chosen node of the device tree. @@ -22,4 +25,27 @@ properties: - bootargs (optional) - Command line associated with this module + Command line associated with this module. This is deprecated and should + be replaced by the bootargs variations described below. + + +Command lines +============= + +Xen also checks for properties directly under /chosen to find suitable command +lines for Xen and Dom0. The logic is the following: + + - If xen,xen-bootargs is present, it will be used for Xen. + - If xen,dom0-bootargs is present, it will be used for Dom0. + - If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is, + bootargs will be used for Xen. + - If no Xen specific properties are present, bootargs is for Dom0. + - If xen,xen-bootargs is present, but xen,dom0-bootargs is missing, + bootargs will be used for Dom0. + +Most of these cases is to make booting with Xen-unaware bootloaders easier. +For those you would hardcode the Xen commandline in the DTB under +/chosen/xen,xen-bootargs and would let the bootloader set the Dom0 command +line by writing bootargs (as for native Linux). +A Xen-aware bootloader would set xen,xen-bootargs for Xen, xen,dom0-bootargs +for Dom0 and bootargs for native Linux. -- cgit v1.2.3