|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In some configurations, when dom0 is busy with I/O, it may take
several minutes to complete all hotplug scripts required when a new
domain is being created. As device create timeout is set to 100
seconds, users get "hotplug scripts not working" error instead of a
new domain.
This patch makes both DEVICE_CREATE_TIMEOUT and DEVICE_DESTROY_TIMEOUT
configurable in xend-config.sxp to allow users to easily adapt hotplug
timeouts to their environment.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In various places in documentation and code, IP addresses are provided
as examples, defaults, or dummy configuration. In general the
specific IP addresses used in Xen are not always appropriate. (For
example, 1.2.3.4 is used in a few places!)
The following addresses should be used:
* For examples and documentation, 192.0.2.0/24. (See RFC3330.)
* For defaults for private networks, a random network from RFC1918.
I have randomly selected 172.30.206.0/24 for this purpose and
documented this in at the only registry I know of,
www.ucam.org/cam-grin. This network should henceforth be used for
default configurations of local bridges, test networks, etc. in
Xen tools.
The following addresses should NOT be used:
* 10.0.*.*, 10.1.*.*, 192.168.0.*, 192.168.1.*, etc. Using these
addresses gives greatly increased likelihood of collision, as
ignorant network administrators and reckless middlebox vendors
often pick networks from the bottom of 10/8 and 192.168/16.
* 169.254.*.*. These are reserved for zeroconf (ad-hoc networking)
and should not be used for Xen private networks, bridges, etc.,
etc. Use of these addresses by Xen scripts causes trouble on hosts
(eg laptops) which find themselves in ad-hoc networking
environments. I think this is not hypothetical (!) since at least
one Linux distribution have specific code to detect this case and
cause Xen startup to fail iff the host already has an external
zeroconf address.
* 1.2.3.4. WTF !?
I have also used 127.0.255.255 in one place where apparently a dummy
address is needed (some Linux kernels won't accept a lack of an NFS
server address). If 127.0.255.255 is mistakenly used it is unlikely
to do any damage to real traffic even if it does escape into the
network at large.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
|