diff options
Diffstat (limited to 'tools/ioemu/iodev/scsidefs.h')
| -rw-r--r-- | tools/ioemu/iodev/scsidefs.h | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/tools/ioemu/iodev/scsidefs.h b/tools/ioemu/iodev/scsidefs.h new file mode 100644 index 0000000000..86239e8a7d --- /dev/null +++ b/tools/ioemu/iodev/scsidefs.h @@ -0,0 +1,286 @@ +///////////////////////////////////////////////////////////////////////// +// $Id: scsidefs.h,v 1.4 2002/09/16 16:58:36 bdenney Exp $ +///////////////////////////////////////////////////////////////////////// +// +// +// iodev/scsidefs.h +// $Id: scsidefs.h,v 1.4 2002/09/16 16:58:36 bdenney Exp $ +// +// This file was copied from ... ? +// + +//*************************************************************************** +// +// Name: SCSIDEFS.H +// +// Description: SCSI definitions ('C' Language) +// +//*************************************************************************** + +//*************************************************************************** +// %%% TARGET STATUS VALUES %%% +//*************************************************************************** +#define STATUS_GOOD 0x00 // Status Good +#define STATUS_CHKCOND 0x02 // Check Condition +#define STATUS_CONDMET 0x04 // Condition Met +#define STATUS_BUSY 0x08 // Busy +#define STATUS_INTERM 0x10 // Intermediate +#define STATUS_INTCDMET 0x14 // Intermediate-condition met +#define STATUS_RESCONF 0x18 // Reservation conflict +#define STATUS_COMTERM 0x22 // Command Terminated +#define STATUS_QFULL 0x28 // Queue full + +//*************************************************************************** +// %%% SCSI MISCELLANEOUS EQUATES %%% +//*************************************************************************** +#define MAXLUN 7 // Maximum Logical Unit Id +#define MAXTARG 7 // Maximum Target Id +#define MAX_SCSI_LUNS 64 // Maximum Number of SCSI LUNs +#define MAX_NUM_HA 8 // Maximum Number of SCSI HA's + +//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ +// +// %%% SCSI COMMAND OPCODES %%% +// +///\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ + +//*************************************************************************** +// %%% Commands for all Device Types %%% +//*************************************************************************** +#define SCSI_CHANGE_DEF 0x40 // Change Definition (Optional) +#define SCSI_COMPARE 0x39 // Compare (O) +#define SCSI_COPY 0x18 // Copy (O) +#define SCSI_COP_VERIFY 0x3A // Copy and Verify (O) +#define SCSI_INQUIRY 0x12 // Inquiry (MANDATORY) +#define SCSI_LOG_SELECT 0x4C // Log Select (O) +#define SCSI_LOG_SENSE 0x4D // Log Sense (O) +#define SCSI_MODE_SEL6 0x15 // Mode Select 6-byte (Device Specific) +#define SCSI_MODE_SEL10 0x55 // Mode Select 10-byte (Device Specific) +#define SCSI_MODE_SEN6 0x1A // Mode Sense 6-byte (Device Specific) +#define SCSI_MODE_SEN10 0x5A // Mode Sense 10-byte (Device Specific) +#define SCSI_READ_BUFF 0x3C // Read Buffer (O) +#define SCSI_REQ_SENSE 0x03 // Request Sense (MANDATORY) +#define SCSI_SEND_DIAG 0x1D // Send Diagnostic (O) +#define SCSI_TST_U_RDY 0x00 // Test Unit Ready (MANDATORY) +#define SCSI_WRITE_BUFF 0x3B // Write Buffer (O) + +//*************************************************************************** +// %%% Commands Unique to Direct Access Devices %%% +//*************************************************************************** +#define SCSI_COMPARE 0x39 // Compare (O) +#define SCSI_FORMAT 0x04 // Format Unit (MANDATORY) +#define SCSI_LCK_UN_CAC 0x36 // Lock Unlock Cache (O) +#define SCSI_PREFETCH 0x34 // Prefetch (O) +#define SCSI_MED_REMOVL 0x1E // Prevent/Allow medium Removal (O) +#define SCSI_READ6 0x08 // Read 6-byte (MANDATORY) +#define SCSI_READ10 0x28 // Read 10-byte (MANDATORY) +#define SCSI_RD_CAPAC 0x25 // Read Capacity (MANDATORY) +#define SCSI_RD_DEFECT 0x37 // Read Defect Data (O) +#define SCSI_READ_LONG 0x3E // Read Long (O) +#define SCSI_REASS_BLK 0x07 // Reassign Blocks (O) +#define SCSI_RCV_DIAG 0x1C // Receive Diagnostic Results (O) +#define SCSI_RELEASE 0x17 // Release Unit (MANDATORY) +#define SCSI_REZERO 0x01 // Rezero Unit (O) +#define SCSI_SRCH_DAT_E 0x31 // Search Data Equal (O) +#define SCSI_SRCH_DAT_H 0x30 // Search Data High (O) +#define SCSI_SRCH_DAT_L 0x32 // Search Data Low (O) +#define SCSI_SEEK6 0x0B // Seek 6-Byte (O) +#define SCSI_SEEK10 0x2B // Seek 10-Byte (O) +#define SCSI_SEND_DIAG 0x1D // Send Diagnostics (MANDATORY) +#define SCSI_SET_LIMIT 0x33 // Set Limits (O) +#define SCSI_START_STP 0x1B // Start/Stop Unit (O) +#define SCSI_SYNC_CACHE 0x35 // Synchronize Cache (O) +#define SCSI_VERIFY 0x2F // Verify (O) +#define SCSI_WRITE6 0x0A // Write 6-Byte (MANDATORY) +#define SCSI_WRITE10 0x2A // Write 10-Byte (MANDATORY) +#define SCSI_WRT_VERIFY 0x2E // Write and Verify (O) +#define SCSI_WRITE_LONG 0x3F // Write Long (O) +#define SCSI_WRITE_SAME 0x41 // Write Same (O) + +//*************************************************************************** +// %%% Commands Unique to Sequential Access Devices %%% +//*************************************************************************** +#define SCSI_ERASE 0x19 // Erase (MANDATORY) +#define SCSI_LOAD_UN 0x1B // Load/Unload (O) +#define SCSI_LOCATE 0x2B // Locate (O) +#define SCSI_RD_BLK_LIM 0x05 // Read Block Limits (MANDATORY) +#define SCSI_READ_POS 0x34 // Read Position (O) +#define SCSI_READ_REV 0x0F // Read Reverse (O) +#define SCSI_REC_BF_DAT 0x14 // Recover Buffer Data (O) +#define SCSI_RESERVE 0x16 // Reserve Unit (MANDATORY) +#define SCSI_REWIND 0x01 // Rewind (MANDATORY) +#define SCSI_SPACE 0x11 // Space (MANDATORY) +#define SCSI_VERIFY_T 0x13 // Verify (Tape) (O) +#define SCSI_WRT_FILE 0x10 // Write Filemarks (MANDATORY) + +//*************************************************************************** +// %%% Commands Unique to Printer Devices %%% +//*************************************************************************** +#define SCSI_PRINT 0x0A // Print (MANDATORY) +#define SCSI_SLEW_PNT 0x0B // Slew and Print (O) +#define SCSI_STOP_PNT 0x1B // Stop Print (O) +#define SCSI_SYNC_BUFF 0x10 // Synchronize Buffer (O) + +//*************************************************************************** +// %%% Commands Unique to Processor Devices %%% +//*************************************************************************** +#define SCSI_RECEIVE 0x08 // Receive (O) +#define SCSI_SEND 0x0A // Send (O) + +//*************************************************************************** +// %%% Commands Unique to Write-Once Devices %%% +//*************************************************************************** +#define SCSI_MEDIUM_SCN 0x38 // Medium Scan (O) +#define SCSI_SRCHDATE10 0x31 // Search Data Equal 10-Byte (O) +#define SCSI_SRCHDATE12 0xB1 // Search Data Equal 12-Byte (O) +#define SCSI_SRCHDATH10 0x30 // Search Data High 10-Byte (O) +#define SCSI_SRCHDATH12 0xB0 // Search Data High 12-Byte (O) +#define SCSI_SRCHDATL10 0x32 // Search Data Low 10-Byte (O) +#define SCSI_SRCHDATL12 0xB2 // Search Data Low 12-Byte (O) +#define SCSI_SET_LIM_10 0x33 // Set Limits 10-Byte (O) +#define SCSI_SET_LIM_12 0xB3 // Set Limits 10-Byte (O) +#define SCSI_VERIFY10 0x2F // Verify 10-Byte (O) +#define SCSI_VERIFY12 0xAF // Verify 12-Byte (O) +#define SCSI_WRITE12 0xAA // Write 12-Byte (O) +#define SCSI_WRT_VER10 0x2E // Write and Verify 10-Byte (O) +#define SCSI_WRT_VER12 0xAE // Write and Verify 12-Byte (O) + +//*************************************************************************** +// %%% Commands Unique to CD-ROM Devices %%% +//*************************************************************************** +#define SCSI_PLAYAUD_10 0x45 // Play Audio 10-Byte (O) +#define SCSI_PLAYAUD_12 0xA5 // Play Audio 12-Byte 12-Byte (O) +#define SCSI_PLAYAUDMSF 0x47 // Play Audio MSF (O) +#define SCSI_PLAYA_TKIN 0x48 // Play Audio Track/Index (O) +#define SCSI_PLYTKREL10 0x49 // Play Track Relative 10-Byte (O) +#define SCSI_PLYTKREL12 0xA9 // Play Track Relative 12-Byte (O) +#define SCSI_READCDCAP 0x25 // Read CD-ROM Capacity (MANDATORY) +#define SCSI_READHEADER 0x44 // Read Header (O) +#define SCSI_SUBCHANNEL 0x42 // Read Subchannel (O) +#define SCSI_READ_TOC 0x43 // Read TOC (O) + +//*************************************************************************** +// %%% Commands Unique to Scanner Devices %%% +//*************************************************************************** +#define SCSI_GETDBSTAT 0x34 // Get Data Buffer Status (O) +#define SCSI_GETWINDOW 0x25 // Get Window (O) +#define SCSI_OBJECTPOS 0x31 // Object Postion (O) +#define SCSI_SCAN 0x1B // Scan (O) +#define SCSI_SETWINDOW 0x24 // Set Window (MANDATORY) + +//*************************************************************************** +// %%% Commands Unique to Optical Memory Devices %%% +//*************************************************************************** +#define SCSI_UpdateBlk 0x3D // Update Block (O) + +//*************************************************************************** +// %%% Commands Unique to Medium Changer Devices %%% +//*************************************************************************** +#define SCSI_EXCHMEDIUM 0xA6 // Exchange Medium (O) +#define SCSI_INITELSTAT 0x07 // Initialize Element Status (O) +#define SCSI_POSTOELEM 0x2B // Position to Element (O) +#define SCSI_REQ_VE_ADD 0xB5 // Request Volume Element Address (O) +#define SCSI_SENDVOLTAG 0xB6 // Send Volume Tag (O) + +//*************************************************************************** +// %%% Commands Unique to Communication Devices %%% +//*************************************************************************** +#define SCSI_GET_MSG_6 0x08 // Get Message 6-Byte (MANDATORY) +#define SCSI_GET_MSG_10 0x28 // Get Message 10-Byte (O) +#define SCSI_GET_MSG_12 0xA8 // Get Message 12-Byte (O) +#define SCSI_SND_MSG_6 0x0A // Send Message 6-Byte (MANDATORY) +#define SCSI_SND_MSG_10 0x2A // Send Message 10-Byte (O) +#define SCSI_SND_MSG_12 0xAA // Send Message 12-Byte (O) + +//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ +// +// %%% END OF SCSI COMMAND OPCODES %%% +// +///\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ + +//*************************************************************************** +// %%% Request Sense Data Format %%% +//*************************************************************************** +typedef struct { + + BYTE ErrorCode; // Error Code (70H or 71H) + BYTE SegmentNum; // Number of current segment descriptor + BYTE SenseKey; // Sense Key(See bit definitions too) + BYTE InfoByte0; // Information MSB + BYTE InfoByte1; // Information MID + BYTE InfoByte2; // Information MID + BYTE InfoByte3; // Information LSB + BYTE AddSenLen; // Additional Sense Length + BYTE ComSpecInf0; // Command Specific Information MSB + BYTE ComSpecInf1; // Command Specific Information MID + BYTE ComSpecInf2; // Command Specific Information MID + BYTE ComSpecInf3; // Command Specific Information LSB + BYTE AddSenseCode; // Additional Sense Code + BYTE AddSenQual; // Additional Sense Code Qualifier + BYTE FieldRepUCode; // Field Replaceable Unit Code + BYTE SenKeySpec15; // Sense Key Specific 15th byte + BYTE SenKeySpec16; // Sense Key Specific 16th byte + BYTE SenKeySpec17; // Sense Key Specific 17th byte + BYTE AddSenseBytes; // Additional Sense Bytes + +} SENSE_DATA_FMT; + +//*************************************************************************** +// %%% REQUEST SENSE ERROR CODE %%% +//*************************************************************************** +#define SERROR_CURRENT 0x70 // Current Errors +#define SERROR_DEFERED 0x71 // Deferred Errors + +//*************************************************************************** +// %%% REQUEST SENSE BIT DEFINITIONS %%% +//*************************************************************************** +#define SENSE_VALID 0x80 // Byte 0 Bit 7 +#define SENSE_FILEMRK 0x80 // Byte 2 Bit 7 +#define SENSE_EOM 0x40 // Byte 2 Bit 6 +#define SENSE_ILI 0x20 // Byte 2 Bit 5 + +//*************************************************************************** +// %%% REQUEST SENSE SENSE KEY DEFINITIONS %%% +//*************************************************************************** +#define KEY_NOSENSE 0x00 // No Sense +#define KEY_RECERROR 0x01 // Recovered Error +#define KEY_NOTREADY 0x02 // Not Ready +#define KEY_MEDIUMERR 0x03 // Medium Error +#define KEY_HARDERROR 0x04 // Hardware Error +#define KEY_ILLGLREQ 0x05 // Illegal Request +#define KEY_UNITATT 0x06 // Unit Attention +#define KEY_DATAPROT 0x07 // Data Protect +#define KEY_BLANKCHK 0x08 // Blank Check +#define KEY_VENDSPEC 0x09 // Vendor Specific +#define KEY_COPYABORT 0x0A // Copy Abort +#define KEY_EQUAL 0x0C // Equal (Search) +#define KEY_VOLOVRFLW 0x0D // Volume Overflow +#define KEY_MISCOMP 0x0E // Miscompare (Search) +#define KEY_RESERVED 0x0F // Reserved + +//*************************************************************************** +// %%% PERIPHERAL DEVICE TYPE DEFINITIONS %%% +//*************************************************************************** +#define DTYPE_DASD 0x00 // Disk Device +#define DTYPE_SEQD 0x01 // Tape Device +#define DTYPE_PRNT 0x02 // Printer +#define DTYPE_PROC 0x03 // Processor +#define DTYPE_WORM 0x04 // Write-once read-multiple +#define DTYPE_CROM 0x05 // CD-ROM device +#define DTYPE_CDROM 0x05 // CD-ROM device +#define DTYPE_SCAN 0x06 // Scanner device +#define DTYPE_OPTI 0x07 // Optical memory device +#define DTYPE_JUKE 0x08 // Medium Changer device +#define DTYPE_COMM 0x09 // Communications device +#define DTYPE_RESL 0x0A // Reserved (low) +#define DTYPE_RESH 0x1E // Reserved (high) +#define DTYPE_UNKNOWN 0x1F // Unknown or no device type + +//*************************************************************************** +// %%% ANSI APPROVED VERSION DEFINITIONS %%% +//*************************************************************************** +#define ANSI_MAYBE 0x0 // Device may or may not be ANSI approved stand +#define ANSI_SCSI1 0x1 // Device complies to ANSI X3.131-1986 (SCSI-1) +#define ANSI_SCSI2 0x2 // Device complies to SCSI-2 +#define ANSI_RESLO 0x3 // Reserved (low) +#define ANSI_RESHI 0x7 // Reserved (high) |