diff options
Diffstat (limited to 'linux-2.6-xen-sparse/arch/ia64/kernel/entry.S')
| -rw-r--r-- | linux-2.6-xen-sparse/arch/ia64/kernel/entry.S | 1620 |
1 files changed, 0 insertions, 1620 deletions
diff --git a/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S b/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S deleted file mode 100644 index f46bdcf401..0000000000 --- a/linux-2.6-xen-sparse/arch/ia64/kernel/entry.S +++ /dev/null @@ -1,1620 +0,0 @@ -/* - * ia64/kernel/entry.S - * - * Kernel entry points. - * - * Copyright (C) 1998-2003, 2005 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Copyright (C) 1999, 2002-2003 - * Asit Mallick <Asit.K.Mallick@intel.com> - * Don Dugger <Don.Dugger@intel.com> - * Suresh Siddha <suresh.b.siddha@intel.com> - * Fenghua Yu <fenghua.yu@intel.com> - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> - */ -/* - * ia64_switch_to now places correct virtual mapping in in TR2 for - * kernel stack. This allows us to handle interrupts without changing - * to physical mode. - * - * Jonathan Nicklin <nicklin@missioncriticallinux.com> - * Patrick O'Rourke <orourke@missioncriticallinux.com> - * 11/07/2000 - */ -/* - * Global (preserved) predicate usage on syscall entry/exit path: - * - * pKStk: See entry.h. - * pUStk: See entry.h. - * pSys: See entry.h. - * pNonSys: !pSys - */ - - -#include <asm/asmmacro.h> -#include <asm/cache.h> -#include <asm/errno.h> -#include <asm/kregs.h> -#include <asm/asm-offsets.h> -#include <asm/pgtable.h> -#include <asm/percpu.h> -#include <asm/processor.h> -#include <asm/thread_info.h> -#include <asm/unistd.h> - -#include "minstate.h" - - /* - * execve() is special because in case of success, we need to - * setup a null register window frame. - */ -ENTRY(ia64_execve) - /* - * Allocate 8 input registers since ptrace() may clobber them - */ - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8) - alloc loc1=ar.pfs,8,2,4,0 - mov loc0=rp - .body - mov out0=in0 // filename - ;; // stop bit between alloc and call - mov out1=in1 // argv - mov out2=in2 // envp - add out3=16,sp // regs - br.call.sptk.many rp=sys_execve -.ret0: -#ifdef CONFIG_IA32_SUPPORT - /* - * Check if we're returning to ia32 mode. If so, we need to restore ia32 registers - * from pt_regs. - */ - adds r16=PT(CR_IPSR)+16,sp - ;; - ld8 r16=[r16] -#endif - cmp4.ge p6,p7=r8,r0 - mov ar.pfs=loc1 // restore ar.pfs - sxt4 r8=r8 // return 64-bit result - ;; - stf.spill [sp]=f0 -(p6) cmp.ne pKStk,pUStk=r0,r0 // a successful execve() lands us in user-mode... - mov rp=loc0 -(p6) mov ar.pfs=r0 // clear ar.pfs on success -(p7) br.ret.sptk.many rp - - /* - * In theory, we'd have to zap this state only to prevent leaking of - * security sensitive state (e.g., if current->mm->dumpable is zero). However, - * this executes in less than 20 cycles even on Itanium, so it's not worth - * optimizing for...). - */ - mov ar.unat=0; mov ar.lc=0 - mov r4=0; mov f2=f0; mov b1=r0 - mov r5=0; mov f3=f0; mov b2=r0 - mov r6=0; mov f4=f0; mov b3=r0 - mov r7=0; mov f5=f0; mov b4=r0 - ldf.fill f12=[sp]; mov f13=f0; mov b5=r0 - ldf.fill f14=[sp]; ldf.fill f15=[sp]; mov f16=f0 - ldf.fill f17=[sp]; ldf.fill f18=[sp]; mov f19=f0 - ldf.fill f20=[sp]; ldf.fill f21=[sp]; mov f22=f0 - ldf.fill f23=[sp]; ldf.fill f24=[sp]; mov f25=f0 - ldf.fill f26=[sp]; ldf.fill f27=[sp]; mov f28=f0 - ldf.fill f29=[sp]; ldf.fill f30=[sp]; mov f31=f0 -#ifdef CONFIG_IA32_SUPPORT - tbit.nz p6,p0=r16, IA64_PSR_IS_BIT - movl loc0=ia64_ret_from_ia32_execve - ;; -(p6) mov rp=loc0 -#endif - br.ret.sptk.many rp -END(ia64_execve) - -/* - * sys_clone2(u64 flags, u64 ustack_base, u64 ustack_size, u64 parent_tidptr, u64 child_tidptr, - * u64 tls) - */ -GLOBAL_ENTRY(sys_clone2) - /* - * Allocate 8 input registers since ptrace() may clobber them - */ - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8) - alloc r16=ar.pfs,8,2,6,0 - DO_SAVE_SWITCH_STACK - adds r2=PT(R16)+IA64_SWITCH_STACK_SIZE+16,sp - mov loc0=rp - mov loc1=r16 // save ar.pfs across do_fork - .body - mov out1=in1 - mov out3=in2 - tbit.nz p6,p0=in0,CLONE_SETTLS_BIT - mov out4=in3 // parent_tidptr: valid only w/CLONE_PARENT_SETTID - ;; -(p6) st8 [r2]=in5 // store TLS in r16 for copy_thread() - mov out5=in4 // child_tidptr: valid only w/CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID - adds out2=IA64_SWITCH_STACK_SIZE+16,sp // out2 = ®s - mov out0=in0 // out0 = clone_flags - br.call.sptk.many rp=do_fork -.ret1: .restore sp - adds sp=IA64_SWITCH_STACK_SIZE,sp // pop the switch stack - mov ar.pfs=loc1 - mov rp=loc0 - br.ret.sptk.many rp -END(sys_clone2) - -/* - * sys_clone(u64 flags, u64 ustack_base, u64 parent_tidptr, u64 child_tidptr, u64 tls) - * Deprecated. Use sys_clone2() instead. - */ -GLOBAL_ENTRY(sys_clone) - /* - * Allocate 8 input registers since ptrace() may clobber them - */ - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8) - alloc r16=ar.pfs,8,2,6,0 - DO_SAVE_SWITCH_STACK - adds r2=PT(R16)+IA64_SWITCH_STACK_SIZE+16,sp - mov loc0=rp - mov loc1=r16 // save ar.pfs across do_fork - .body - mov out1=in1 - mov out3=16 // stacksize (compensates for 16-byte scratch area) - tbit.nz p6,p0=in0,CLONE_SETTLS_BIT - mov out4=in2 // parent_tidptr: valid only w/CLONE_PARENT_SETTID - ;; -(p6) st8 [r2]=in4 // store TLS in r13 (tp) - mov out5=in3 // child_tidptr: valid only w/CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID - adds out2=IA64_SWITCH_STACK_SIZE+16,sp // out2 = ®s - mov out0=in0 // out0 = clone_flags - br.call.sptk.many rp=do_fork -.ret2: .restore sp - adds sp=IA64_SWITCH_STACK_SIZE,sp // pop the switch stack - mov ar.pfs=loc1 - mov rp=loc0 - br.ret.sptk.many rp -END(sys_clone) - -/* - * prev_task <- ia64_switch_to(struct task_struct *next) - * With Ingo's new scheduler, interrupts are disabled when this routine gets - * called. The code starting at .map relies on this. The rest of the code - * doesn't care about the interrupt masking status. - */ -GLOBAL_ENTRY(__ia64_switch_to) - .prologue - alloc r16=ar.pfs,1,0,0,0 - DO_SAVE_SWITCH_STACK - .body - - adds r22=IA64_TASK_THREAD_KSP_OFFSET,r13 - movl r25=init_task - mov r27=IA64_KR(CURRENT_STACK) - adds r21=IA64_TASK_THREAD_KSP_OFFSET,in0 - dep r20=0,in0,61,3 // physical address of "next" - ;; - st8 [r22]=sp // save kernel stack pointer of old task - shr.u r26=r20,IA64_GRANULE_SHIFT - cmp.eq p7,p6=r25,in0 - ;; - /* - * If we've already mapped this task's page, we can skip doing it again. - */ -(p6) cmp.eq p7,p6=r26,r27 -(p6) br.cond.dpnt .map - ;; -.done: - ld8 sp=[r21] // load kernel stack pointer of new task - mov IA64_KR(CURRENT)=in0 // update "current" application register - mov r8=r13 // return pointer to previously running task - mov r13=in0 // set "current" pointer - ;; - DO_LOAD_SWITCH_STACK - -#ifdef CONFIG_SMP - sync.i // ensure "fc"s done by this CPU are visible on other CPUs -#endif - br.ret.sptk.many rp // boogie on out in new context - -.map: - rsm psr.ic // interrupts (psr.i) are already disabled here - movl r25=PAGE_KERNEL - ;; - srlz.d - or r23=r25,r20 // construct PA | page properties - mov r25=IA64_GRANULE_SHIFT<<2 - ;; - mov cr.itir=r25 - mov cr.ifa=in0 // VA of next task... - ;; - mov r25=IA64_TR_CURRENT_STACK - mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped... - ;; - itr.d dtr[r25]=r23 // wire in new mapping... - ssm psr.ic // reenable the psr.ic bit - ;; - srlz.d - br.cond.sptk .done -END(__ia64_switch_to) - -/* - * Note that interrupts are enabled during save_switch_stack and load_switch_stack. This - * means that we may get an interrupt with "sp" pointing to the new kernel stack while - * ar.bspstore is still pointing to the old kernel backing store area. Since ar.rsc, - * ar.rnat, ar.bsp, and ar.bspstore are all preserved by interrupts, this is not a - * problem. Also, we don't need to specify unwind information for preserved registers - * that are not modified in save_switch_stack as the right unwind information is already - * specified at the call-site of save_switch_stack. - */ - -/* - * save_switch_stack: - * - r16 holds ar.pfs - * - b7 holds address to return to - * - rp (b0) holds return address to save - */ -GLOBAL_ENTRY(save_switch_stack) - .prologue - .altrp b7 - flushrs // flush dirty regs to backing store (must be first in insn group) - .save @priunat,r17 - mov r17=ar.unat // preserve caller's - .body -#ifdef CONFIG_ITANIUM - adds r2=16+128,sp - adds r3=16+64,sp - adds r14=SW(R4)+16,sp - ;; - st8.spill [r14]=r4,16 // spill r4 - lfetch.fault.excl.nt1 [r3],128 - ;; - lfetch.fault.excl.nt1 [r2],128 - lfetch.fault.excl.nt1 [r3],128 - ;; - lfetch.fault.excl [r2] - lfetch.fault.excl [r3] - adds r15=SW(R5)+16,sp -#else - add r2=16+3*128,sp - add r3=16,sp - add r14=SW(R4)+16,sp - ;; - st8.spill [r14]=r4,SW(R6)-SW(R4) // spill r4 and prefetch offset 0x1c0 - lfetch.fault.excl.nt1 [r3],128 // prefetch offset 0x010 - ;; - lfetch.fault.excl.nt1 [r3],128 // prefetch offset 0x090 - lfetch.fault.excl.nt1 [r2],128 // prefetch offset 0x190 - ;; - lfetch.fault.excl.nt1 [r3] // prefetch offset 0x110 - lfetch.fault.excl.nt1 [r2] // prefetch offset 0x210 - adds r15=SW(R5)+16,sp -#endif - ;; - st8.spill [r15]=r5,SW(R7)-SW(R5) // spill r5 - mov.m ar.rsc=0 // put RSE in mode: enforced lazy, little endian, pl 0 - add r2=SW(F2)+16,sp // r2 = &sw->f2 - ;; - st8.spill [r14]=r6,SW(B0)-SW(R6) // spill r6 - mov.m r18=ar.fpsr // preserve fpsr - add r3=SW(F3)+16,sp // r3 = &sw->f3 - ;; - stf.spill [r2]=f2,32 - mov.m r19=ar.rnat - mov r21=b0 - - stf.spill [r3]=f3,32 - st8.spill [r15]=r7,SW(B2)-SW(R7) // spill r7 - mov r22=b1 - ;; - // since we're done with the spills, read and save ar.unat: - mov.m r29=ar.unat - mov.m r20=ar.bspstore - mov r23=b2 - stf.spill [r2]=f4,32 - stf.spill [r3]=f5,32 - mov r24=b3 - ;; - st8 [r14]=r21,SW(B1)-SW(B0) // save b0 - st8 [r15]=r23,SW(B3)-SW(B2) // save b2 - mov r25=b4 - mov r26=b5 - ;; - st8 [r14]=r22,SW(B4)-SW(B1) // save b1 - st8 [r15]=r24,SW(AR_PFS)-SW(B3) // save b3 - mov r21=ar.lc // I-unit - stf.spill [r2]=f12,32 - stf.spill [r3]=f13,32 - ;; - st8 [r14]=r25,SW(B5)-SW(B4) // save b4 - st8 [r15]=r16,SW(AR_LC)-SW(AR_PFS) // save ar.pfs - stf.spill [r2]=f14,32 - stf.spill [r3]=f15,32 - ;; - st8 [r14]=r26 // save b5 - st8 [r15]=r21 // save ar.lc - stf.spill [r2]=f16,32 - stf.spill [r3]=f17,32 - ;; - stf.spill [r2]=f18,32 - stf.spill [r3]=f19,32 - ;; - stf.spill [r2]=f20,32 - stf.spill [r3]=f21,32 - ;; - stf.spill [r2]=f22,32 - stf.spill [r3]=f23,32 - ;; - stf.spill [r2]=f24,32 - stf.spill [r3]=f25,32 - ;; - stf.spill [r2]=f26,32 - stf.spill [r3]=f27,32 - ;; - stf.spill [r2]=f28,32 - stf.spill [r3]=f29,32 - ;; - stf.spill [r2]=f30,SW(AR_UNAT)-SW(F30) - stf.spill [r3]=f31,SW(PR)-SW(F31) - add r14=SW(CALLER_UNAT)+16,sp - ;; - st8 [r2]=r29,SW(AR_RNAT)-SW(AR_UNAT) // save ar.unat - st8 [r14]=r17,SW(AR_FPSR)-SW(CALLER_UNAT) // save caller_unat - mov r21=pr - ;; - st8 [r2]=r19,SW(AR_BSPSTORE)-SW(AR_RNAT) // save ar.rnat - st8 [r3]=r21 // save predicate registers - ;; - st8 [r2]=r20 // save ar.bspstore - st8 [r14]=r18 // save fpsr - mov ar.rsc=3 // put RSE back into eager mode, pl 0 - br.cond.sptk.many b7 -END(save_switch_stack) - -/* - * load_switch_stack: - * - "invala" MUST be done at call site (normally in DO_LOAD_SWITCH_STACK) - * - b7 holds address to return to - * - must not touch r8-r11 - */ -GLOBAL_ENTRY(load_switch_stack) - .prologue - .altrp b7 - - .body - lfetch.fault.nt1 [sp] - adds r2=SW(AR_BSPSTORE)+16,sp - adds r3=SW(AR_UNAT)+16,sp - mov ar.rsc=0 // put RSE into enforced lazy mode - adds r14=SW(CALLER_UNAT)+16,sp - adds r15=SW(AR_FPSR)+16,sp - ;; - ld8 r27=[r2],(SW(B0)-SW(AR_BSPSTORE)) // bspstore - ld8 r29=[r3],(SW(B1)-SW(AR_UNAT)) // unat - ;; - ld8 r21=[r2],16 // restore b0 - ld8 r22=[r3],16 // restore b1 - ;; - ld8 r23=[r2],16 // restore b2 - ld8 r24=[r3],16 // restore b3 - ;; - ld8 r25=[r2],16 // restore b4 - ld8 r26=[r3],16 // restore b5 - ;; - ld8 r16=[r2],(SW(PR)-SW(AR_PFS)) // ar.pfs - ld8 r17=[r3],(SW(AR_RNAT)-SW(AR_LC)) // ar.lc - ;; - ld8 r28=[r2] // restore pr - ld8 r30=[r3] // restore rnat - ;; - ld8 r18=[r14],16 // restore caller's unat - ld8 r19=[r15],24 // restore fpsr - ;; - ldf.fill f2=[r14],32 - ldf.fill f3=[r15],32 - ;; - ldf.fill f4=[r14],32 - ldf.fill f5=[r15],32 - ;; - ldf.fill f12=[r14],32 - ldf.fill f13=[r15],32 - ;; - ldf.fill f14=[r14],32 - ldf.fill f15=[r15],32 - ;; - ldf.fill f16=[r14],32 - ldf.fill f17=[r15],32 - ;; - ldf.fill f18=[r14],32 - ldf.fill f19=[r15],32 - mov b0=r21 - ;; - ldf.fill f20=[r14],32 - ldf.fill f21=[r15],32 - mov b1=r22 - ;; - ldf.fill f22=[r14],32 - ldf.fill f23=[r15],32 - mov b2=r23 - ;; - mov ar.bspstore=r27 - mov ar.unat=r29 // establish unat holding the NaT bits for r4-r7 - mov b3=r24 - ;; - ldf.fill f24=[r14],32 - ldf.fill f25=[r15],32 - mov b4=r25 - ;; - ldf.fill f26=[r14],32 - ldf.fill f27=[r15],32 - mov b5=r26 - ;; - ldf.fill f28=[r14],32 - ldf.fill f29=[r15],32 - mov ar.pfs=r16 - ;; - ldf.fill f30=[r14],32 - ldf.fill f31=[r15],24 - mov ar.lc=r17 - ;; - ld8.fill r4=[r14],16 - ld8.fill r5=[r15],16 - mov pr=r28,-1 - ;; - ld8.fill r6=[r14],16 - ld8.fill r7=[r15],16 - - mov ar.unat=r18 // restore caller's unat - mov ar.rnat=r30 // must restore after bspstore but before rsc! - mov ar.fpsr=r19 // restore fpsr - mov ar.rsc=3 // put RSE back into eager mode, pl 0 - br.cond.sptk.many b7 -END(load_switch_stack) - -GLOBAL_ENTRY(prefetch_stack) - add r14 = -IA64_SWITCH_STACK_SIZE, sp - add r15 = IA64_TASK_THREAD_KSP_OFFSET, in0 - ;; - ld8 r16 = [r15] // load next's stack pointer - lfetch.fault.excl [r14], 128 - ;; - lfetch.fault.excl [r14], 128 - lfetch.fault [r16], 128 - ;; - lfetch.fault.excl [r14], 128 - lfetch.fault [r16], 128 - ;; - lfetch.fault.excl [r14], 128 - lfetch.fault [r16], 128 - ;; - lfetch.fault.excl [r14], 128 - lfetch.fault [r16], 128 - ;; - lfetch.fault [r16], 128 - br.ret.sptk.many rp -END(prefetch_stack) - -GLOBAL_ENTRY(execve) - mov r15=__NR_execve // put syscall number in place - break __BREAK_SYSCALL - br.ret.sptk.many rp -END(execve) - -GLOBAL_ENTRY(clone) - mov r15=__NR_clone // put syscall number in place - break __BREAK_SYSCALL - br.ret.sptk.many rp -END(clone) - - /* - * Invoke a system call, but do some tracing before and after the call. - * We MUST preserve the current register frame throughout this routine - * because some system calls (such as ia64_execve) directly - * manipulate ar.pfs. - */ -GLOBAL_ENTRY(__ia64_trace_syscall) - PT_REGS_UNWIND_INFO(0) - /* - * We need to preserve the scratch registers f6-f11 in case the system - * call is sigreturn. - */ - adds r16=PT(F6)+16,sp - adds r17=PT(F7)+16,sp - ;; - stf.spill [r16]=f6,32 - stf.spill [r17]=f7,32 - ;; - stf.spill [r16]=f8,32 - stf.spill [r17]=f9,32 - ;; - stf.spill [r16]=f10 - stf.spill [r17]=f11 - br.call.sptk.many rp=syscall_trace_enter // give parent a chance to catch syscall args - adds r16=PT(F6)+16,sp - adds r17=PT(F7)+16,sp - ;; - ldf.fill f6=[r16],32 - ldf.fill f7=[r17],32 - ;; - ldf.fill f8=[r16],32 - ldf.fill f9=[r17],32 - ;; - ldf.fill f10=[r16] - ldf.fill f11=[r17] - // the syscall number may have changed, so re-load it and re-calculate the - // syscall entry-point: - adds r15=PT(R15)+16,sp // r15 = &pt_regs.r15 (syscall #) - ;; - ld8 r15=[r15] - mov r3=NR_syscalls - 1 - ;; - adds r15=-1024,r15 - movl r16=sys_call_table - ;; - shladd r20=r15,3,r16 // r20 = sys_call_table + 8*(syscall-1024) - cmp.leu p6,p7=r15,r3 - ;; -(p6) ld8 r20=[r20] // load address of syscall entry point -(p7) movl r20=sys_ni_syscall - ;; - mov b6=r20 - br.call.sptk.many rp=b6 // do the syscall -.strace_check_retval: - cmp.lt p6,p0=r8,r0 // syscall failed? - adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8 - adds r3=PT(R10)+16,sp // r3 = &pt_regs.r10 - mov r10=0 -(p6) br.cond.sptk strace_error // syscall failed -> - ;; // avoid RAW on r10 -.strace_save_retval: -.mem.offset 0,0; st8.spill [r2]=r8 // store return value in slot for r8 -.mem.offset 8,0; st8.spill [r3]=r10 // clear error indication in slot for r10 - br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value -.ret3: -(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk - br.cond.sptk .work_pending_syscall_end - -strace_error: - ld8 r3=[r2] // load pt_regs.r8 - sub r9=0,r8 // negate return value to get errno value - ;; - cmp.ne p6,p0=r3,r0 // is pt_regs.r8!=0? - adds r3=16,r2 // r3=&pt_regs.r10 - ;; -(p6) mov r10=-1 -(p6) mov r8=r9 - br.cond.sptk .strace_save_retval -END(__ia64_trace_syscall) - - /* - * When traced and returning from sigreturn, we invoke syscall_trace but then - * go straight to ia64_leave_kernel rather than ia64_leave_syscall. - */ -GLOBAL_ENTRY(ia64_strace_leave_kernel) - PT_REGS_UNWIND_INFO(0) -{ /* - * Some versions of gas generate bad unwind info if the first instruction of a - * procedure doesn't go into the first slot of a bundle. This is a workaround. - */ - nop.m 0 - nop.i 0 - br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value -} -.ret4: br.cond.sptk ia64_leave_kernel -END(ia64_strace_leave_kernel) - -GLOBAL_ENTRY(__ia64_ret_from_clone) - PT_REGS_UNWIND_INFO(0) -{ /* - * Some versions of gas generate bad unwind info if the first instruction of a - * procedure doesn't go into the first slot of a bundle. This is a workaround. - */ - nop.m 0 - nop.i 0 - /* - * We need to call schedule_tail() to complete the scheduling process. - * Called by ia64_switch_to() after do_fork()->copy_thread(). r8 contains the - * address of the previously executing task. - */ - br.call.sptk.many rp=ia64_invoke_schedule_tail -} -.ret8: - adds r2=TI_FLAGS+IA64_TASK_SIZE,r13 - ;; - ld4 r2=[r2] - ;; - mov r8=0 - and r2=_TIF_SYSCALL_TRACEAUDIT,r2 - ;; - cmp.ne p6,p0=r2,r0 -(p6) br.cond.spnt .strace_check_retval - ;; // added stop bits to prevent r8 dependency -END(__ia64_ret_from_clone) - // fall through -GLOBAL_ENTRY(ia64_ret_from_syscall) - PT_REGS_UNWIND_INFO(0) - cmp.ge p6,p7=r8,r0 // syscall executed successfully? - adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8 - mov r10=r0 // clear error indication in r10 -(p7) br.cond.spnt handle_syscall_error // handle potential syscall failure - ;; - // don't fall through, ia64_leave_syscall may be #define'd - br.cond.sptk.few ia64_leave_syscall - ;; -END(ia64_ret_from_syscall) -/* - * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't - * need to switch to bank 0 and doesn't restore the scratch registers. - * To avoid leaking kernel bits, the scratch registers are set to - * the following known-to-be-safe values: - * - * r1: restored (global pointer) - * r2: cleared - * r3: 1 (when returning to user-level) - * r8-r11: restored (syscall return value(s)) - * r12: restored (user-level stack pointer) - * r13: restored (user-level thread pointer) - * r14: set to __kernel_syscall_via_epc - * r15: restored (syscall #) - * r16-r17: cleared - * r18: user-level b6 - * r19: cleared - * r20: user-level ar.fpsr - * r21: user-level b0 - * r22: cleared - * r23: user-level ar.bspstore - * r24: user-level ar.rnat - * r25: user-level ar.unat - * r26: user-level ar.pfs - * r27: user-level ar.rsc - * r28: user-level ip - * r29: user-level psr - * r30: user-level cfm - * r31: user-level pr - * f6-f11: cleared - * pr: restored (user-level pr) - * b0: restored (user-level rp) - * b6: restored - * b7: set to __kernel_syscall_via_epc - * ar.unat: restored (user-level ar.unat) - * ar.pfs: restored (user-level ar.pfs) - * ar.rsc: restored (user-level ar.rsc) - * ar.rnat: restored (user-level ar.rnat) - * ar.bspstore: restored (user-level ar.bspstore) - * ar.fpsr: restored (user-level ar.fpsr) - * ar.ccv: cleared - * ar.csd: cleared - * ar.ssd: cleared - */ -GLOBAL_ENTRY(__ia64_leave_syscall) - PT_REGS_UNWIND_INFO(0) - /* - * work.need_resched etc. mustn't get changed by this CPU before it returns to - * user- or fsys-mode, hence we disable interrupts early on. - * - * p6 controls whether current_thread_info()->flags needs to be check for - * extra work. We always check for extra work when returning to user-level. - * With CONFIG_PREEMPT, we also check for extra work when the preempt_count - * is 0. After extra work processing has been completed, execution - * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check - * needs to be redone. - */ -#ifdef CONFIG_PREEMPT - rsm psr.i // disable interrupts - cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall -(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13 - ;; - .pred.rel.mutex pUStk,pKStk -(pKStk) ld4 r21=[r20] // r21 <- preempt_count -(pUStk) mov r21=0 // r21 <- 0 - ;; - cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0) -#else /* !CONFIG_PREEMPT */ -(pUStk) rsm psr.i - cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall -(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk -#endif -.work_processed_syscall: - adds r2=PT(LOADRS)+16,r12 - adds r3=PT(AR_BSPSTORE)+16,r12 - adds r18=TI_FLAGS+IA64_TASK_SIZE,r13 - ;; -(p6) ld4 r31=[r18] // load current_thread_info()->flags - ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs" - nop.i 0 - ;; - mov r16=ar.bsp // M2 get existing backing store pointer - ld8 r18=[r2],PT(R9)-PT(B6) // load b6 -(p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE? - ;; - ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage) -(p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending? -(p6) br.cond.spnt .work_pending_syscall - ;; - // start restoring the state saved on the kernel stack (struct pt_regs): - ld8 r9=[r2],PT(CR_IPSR)-PT(R9) - ld8 r11=[r3],PT(CR_IIP)-PT(R11) -(pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE! - ;; - invala // M0|1 invalidate ALAT - rsm psr.i | psr.ic // M2 turn off interrupts and interruption collection - cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should restore cr.ifs - - ld8 r29=[r2],16 // M0|1 load cr.ipsr - ld8 r28=[r3],16 // M0|1 load cr.iip - mov r22=r0 // A clear r22 - ;; - ld8 r30=[r2],16 // M0|1 load cr.ifs - ld8 r25=[r3],16 // M0|1 load ar.unat -(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 - ;; - ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs -(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled - nop 0 - ;; - ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0 - ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc - mov f6=f0 // F clear f6 - ;; - ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be garbage) - ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates - mov f7=f0 // F clear f7 - ;; - ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr - ld8.fill r1=[r3],16 // M0|1 load r1 -(pUStk) mov r17=1 // A - ;; -(pUStk) st1 [r14]=r17 // M2|3 - ld8.fill r13=[r3],16 // M0|1 - mov f8=f0 // F clear f8 - ;; - ld8.fill r12=[r2] // M0|1 restore r12 (sp) - ld8.fill r15=[r3] // M0|1 restore r15 - mov b6=r18 // I0 restore b6 - - addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A - mov f9=f0 // F clear f9 -(pKStk) br.cond.dpnt.many skip_rbs_switch // B - - srlz.d // M0 ensure interruption collection is off (for cover) - shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition - cover // B add current frame into dirty partition & set cr.ifs - ;; -(pUStk) ld4 r17=[r17] // M0|1 r17 = cpu_data->phys_stacked_size_p8 - mov r19=ar.bsp // M2 get new backing store pointer - mov f10=f0 // F clear f10 - - nop.m 0 - movl r14=__kernel_syscall_via_epc // X - ;; - mov.m ar.csd=r0 // M2 clear ar.csd - mov.m ar.ccv=r0 // M2 clear ar.ccv - mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc) - - mov.m ar.ssd=r0 // M2 clear ar.ssd - mov f11=f0 // F clear f11 - br.cond.sptk.many rbs_switch // B -END(__ia64_leave_syscall) - -#ifdef CONFIG_IA32_SUPPORT -GLOBAL_ENTRY(ia64_ret_from_ia32_execve) - PT_REGS_UNWIND_INFO(0) - adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8 - adds r3=PT(R10)+16,sp // r3 = &pt_regs.r10 - ;; - .mem.offset 0,0 - st8.spill [r2]=r8 // store return value in slot for r8 and set unat bit - .mem.offset 8,0 - st8.spill [r3]=r0 // clear error indication in slot for r10 and set unat bit - ;; - // don't fall through, ia64_leave_kernel may be #define'd - br.cond.sptk.few ia64_leave_kernel - ;; -END(ia64_ret_from_ia32_execve) -#endif /* CONFIG_IA32_SUPPORT */ -GLOBAL_ENTRY(__ia64_leave_kernel) - PT_REGS_UNWIND_INFO(0) - /* - * work.need_resched etc. mustn't get changed by this CPU before it returns to - * user- or fsys-mode, hence we disable interrupts early on. - * - * p6 controls whether current_thread_info()->flags needs to be check for - * extra work. We always check for extra work when returning to user-level. - * With CONFIG_PREEMPT, we also check for extra work when the preempt_count - * is 0. After extra work processing has been completed, execution - * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check - * needs to be redone. - */ -#ifdef CONFIG_PREEMPT - rsm psr.i // disable interrupts - cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel -(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13 - ;; - .pred.rel.mutex pUStk,pKStk -(pKStk) ld4 r21=[r20] // r21 <- preempt_count -(pUStk) mov r21=0 // r21 <- 0 - ;; - cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0) -#else -(pUStk) rsm psr.i - cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel -(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk -#endif -.work_processed_kernel: - adds r17=TI_FLAGS+IA64_TASK_SIZE,r13 - ;; -(p6) ld4 r31=[r17] // load current_thread_info()->flags - adds r21=PT(PR)+16,r12 - ;; - - lfetch [r21],PT(CR_IPSR)-PT(PR) - adds r2=PT(B6)+16,r12 - adds r3=PT(R16)+16,r12 - ;; - lfetch [r21] - ld8 r28=[r2],8 // load b6 - adds r29=PT(R24)+16,r12 - - ld8.fill r16=[r3],PT(AR_CSD)-PT(R16) - adds r30=PT(AR_CCV)+16,r12 -(p6) and r19=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE? - ;; - ld8.fill r24=[r29] - ld8 r15=[r30] // load ar.ccv -(p6) cmp4.ne.unc p6,p0=r19, r0 // any special work pending? - ;; - ld8 r29=[r2],16 // load b7 - ld8 r30=[r3],16 // load ar.csd -(p6) br.cond.spnt .work_pending - ;; - ld8 r31=[r2],16 // load ar.ssd - ld8.fill r8=[r3],16 - ;; - ld8.fill r9=[r2],16 - ld8.fill r10=[r3],PT(R17)-PT(R10) - ;; - ld8.fill r11=[r2],PT(R18)-PT(R11) - ld8.fill r17=[r3],16 - ;; - ld8.fill r18=[r2],16 - ld8.fill r19=[r3],16 - ;; - ld8.fill r20=[r2],16 - ld8.fill r21=[r3],16 - mov ar.csd=r30 - mov ar.ssd=r31 - ;; - rsm psr.i | psr.ic // initiate turning off of interrupt and interruption collection - invala // invalidate ALAT - ;; - ld8.fill r22=[r2],24 - ld8.fill r23=[r3],24 - mov b6=r28 - ;; - ld8.fill r25=[r2],16 - ld8.fill r26=[r3],16 - mov b7=r29 - ;; - ld8.fill r27=[r2],16 - ld8.fill r28=[r3],16 - ;; - ld8.fill r29=[r2],16 - ld8.fill r30=[r3],24 - ;; - ld8.fill r31=[r2],PT(F9)-PT(R31) - adds r3=PT(F10)-PT(F6),r3 - ;; - ldf.fill f9=[r2],PT(F6)-PT(F9) - ldf.fill f10=[r3],PT(F8)-PT(F10) - ;; - ldf.fill f6=[r2],PT(F7)-PT(F6) - ;; - ldf.fill f7=[r2],PT(F11)-PT(F7) - ldf.fill f8=[r3],32 - ;; - srlz.d // ensure that inter. collection is off (VHPT is don't care, since text is pinned) - mov ar.ccv=r15 - ;; - ldf.fill f11=[r2] - bsw.0 // switch back to bank 0 (no stop bit required beforehand...) - ;; -(pUStk) mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency) - adds r16=PT(CR_IPSR)+16,r12 - adds r17=PT(CR_IIP)+16,r12 - -(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled - nop.i 0 - nop.i 0 - ;; - ld8 r29=[r16],16 // load cr.ipsr - ld8 r28=[r17],16 // load cr.iip - ;; - ld8 r30=[r16],16 // load cr.ifs - ld8 r25=[r17],16 // load ar.unat - ;; - ld8 r26=[r16],16 // load ar.pfs - ld8 r27=[r17],16 // load ar.rsc - cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore cr.ifs - ;; - ld8 r24=[r16],16 // load ar.rnat (may be garbage) - ld8 r23=[r17],16 // load ar.bspstore (may be garbage) - ;; - ld8 r31=[r16],16 // load predicates - ld8 r21=[r17],16 // load b0 - ;; - ld8 r19=[r16],16 // load ar.rsc value for "loadrs" - ld8.fill r1=[r17],16 // load r1 - ;; - ld8.fill r12=[r16],16 - ld8.fill r13=[r17],16 -(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18 - ;; - ld8 r20=[r16],16 // ar.fpsr - ld8.fill r15=[r17],16 - ;; - ld8.fill r14=[r16],16 - ld8.fill r2=[r17] -(pUStk) mov r17=1 - ;; - ld8.fill r3=[r16] -(pUStk) st1 [r18]=r17 // restore current->thread.on_ustack - shr.u r18=r19,16 // get byte size of existing "dirty" partition - ;; - mov r16=ar.bsp // get existing backing store pointer - addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 - ;; - ld4 r17=[r17] // r17 = cpu_data->phys_stacked_size_p8 -(pKStk) br.cond.dpnt skip_rbs_switch - - /* - * Restore user backing store. - * - * NOTE: alloc, loadrs, and cover can't be predicated. - */ -(pNonSys) br.cond.dpnt dont_preserve_current_frame - cover // add current frame into dirty partition and set cr.ifs - ;; - mov r19=ar.bsp // get new backing store pointer -rbs_switch: - sub r16=r16,r18 // krbs = old bsp - size of dirty partition - cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs - ;; - sub r19=r19,r16 // calculate total byte size of dirty partition - add r18=64,r18 // don't force in0-in7 into memory... - ;; - shl r19=r19,16 // shift size of dirty partition into loadrs position - ;; -dont_preserve_current_frame: - /* - * To prevent leaking bits between the kernel and user-space, - * we must clear the stacked registers in the "invalid" partition here. - * Not pretty, but at least it's fast (3.34 registers/cycle on Itanium, - * 5 registers/cycle on McKinley). - */ -# define pRecurse p6 -# define pReturn p7 -#ifdef CONFIG_ITANIUM -# define Nregs 10 -#else -# define Nregs 14 -#endif - alloc loc0=ar.pfs,2,Nregs-2,2,0 - shr.u loc1=r18,9 // RNaTslots <= floor(dirtySize / (64*8)) - sub r17=r17,r18 // r17 = (physStackedSize + 8) - dirtySize - ;; - mov ar.rsc=r19 // load ar.rsc to be used for "loadrs" - shladd in0=loc1,3,r17 - mov in1=0 - ;; - TEXT_ALIGN(32) -rse_clear_invalid: -#ifdef CONFIG_ITANIUM - // cycle 0 - { .mii - alloc loc0=ar.pfs,2,Nregs-2,2,0 - cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse - add out0=-Nregs*8,in0 -}{ .mfb - add out1=1,in1 // increment recursion count - nop.f 0 - nop.b 0 // can't do br.call here because of alloc (WAW on CFM) - ;; -}{ .mfi // cycle 1 - mov loc1=0 - nop.f 0 - mov loc2=0 -}{ .mib - mov loc3=0 - mov loc4=0 -(pRecurse) br.call.sptk.many b0=rse_clear_invalid - -}{ .mfi // cycle 2 - mov loc5=0 - nop.f 0 - cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret -}{ .mib - mov loc6=0 - mov loc7=0 -(pReturn) br.ret.sptk.many b0 -} -#else /* !CONFIG_ITANIUM */ - alloc loc0=ar.pfs,2,Nregs-2,2,0 - cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse - add out0=-Nregs*8,in0 - add out1=1,in1 // increment recursion count - mov loc1=0 - mov loc2=0 - ;; - mov loc3=0 - mov loc4=0 - mov loc5=0 - mov loc6=0 - mov loc7=0 -(pRecurse) br.call.dptk.few b0=rse_clear_invalid - ;; - mov loc8=0 - mov loc9=0 - cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret - mov loc10=0 - mov loc11=0 -(pReturn) br.ret.dptk.many b0 -#endif /* !CONFIG_ITANIUM */ -# undef pRecurse -# undef pReturn - ;; - alloc r17=ar.pfs,0,0,0,0 // drop current register frame - ;; - loadrs - ;; -skip_rbs_switch: - mov ar.unat=r25 // M2 -(pKStk) extr.u r22=r22,21,1 // I0 extract current value of psr.pp from r22 -(pLvSys)mov r19=r0 // A clear r19 for leave_syscall, no-op otherwise - ;; -(pUStk) mov ar.bspstore=r23 // M2 -(pKStk) dep r29=r22,r29,21,1 // I0 update ipsr.pp with psr.pp -(pLvSys)mov r16=r0 // A clear r16 for leave_syscall, no-op otherwise - ;; - mov cr.ipsr=r29 // M2 - mov ar.pfs=r26 // I0 -(pLvSys)mov r17=r0 // A clear r17 for leave_syscall, no-op otherwise - -(p9) mov cr.ifs=r30 // M2 - mov b0=r21 // I0 -(pLvSys)mov r18=r0 // A clear r18 for leave_syscall, no-op otherwise - - mov ar.fpsr=r20 // M2 - mov cr.iip=r28 // M2 - nop 0 - ;; -(pUStk) mov ar.rnat=r24 // M2 must happen with RSE in lazy mode - nop 0 -(pLvSys)mov r2=r0 - - mov ar.rsc=r27 // M2 - mov pr=r31,-1 // I0 - rfi // B - - /* - * On entry: - * r20 = ¤t->thread_info->pre_count (if CONFIG_PREEMPT) - * r31 = current->thread_info->flags - * On exit: - * p6 = TRUE if work-pending-check needs to be redone - */ -.work_pending_syscall: - add r2=-8,r2 - add r3=-8,r3 - ;; - st8 [r2]=r8 - st8 [r3]=r10 -.work_pending: - tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0? -(p6) br.cond.sptk.few .notify -#ifdef CONFIG_PREEMPT -(pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1 - ;; -(pKStk) st4 [r20]=r21 - ssm psr.i // enable interrupts -#endif - br.call.spnt.many rp=schedule -.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1 - rsm psr.i // disable interrupts - ;; -#ifdef CONFIG_PREEMPT -(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13 - ;; -(pKStk) st4 [r20]=r0 // preempt_count() <- 0 -#endif -(pLvSys)br.cond.sptk.few .work_pending_syscall_end - br.cond.sptk.many .work_processed_kernel // re-check - -.notify: -(pUStk) br.call.spnt.many rp=notify_resume_user -.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0 -(pLvSys)br.cond.sptk.few .work_pending_syscall_end - br.cond.sptk.many .work_processed_kernel // don't re-check - -.work_pending_syscall_end: - adds r2=PT(R8)+16,r12 - adds r3=PT(R10)+16,r12 - ;; - ld8 r8=[r2] - ld8 r10=[r3] - br.cond.sptk.many .work_processed_syscall // re-check - -END(__ia64_leave_kernel) - -ENTRY(handle_syscall_error) - /* - * Some system calls (e.g., ptrace, mmap) can return arbitrary values which could - * lead us to mistake a negative return value as a failed syscall. Those syscall - * must deposit a non-zero value in pt_regs.r8 to indicate an error. If - * pt_regs.r8 is zero, we assume that the call completed successfully. - */ - PT_REGS_UNWIND_INFO(0) - ld8 r3=[r2] // load pt_regs.r8 - ;; - cmp.eq p6,p7=r3,r0 // is pt_regs.r8==0? - ;; -(p7) mov r10=-1 -(p7) sub r8=0,r8 // negate return value to get errno - br.cond.sptk ia64_leave_syscall -END(handle_syscall_error) - - /* - * Invoke schedule_tail(task) while preserving in0-in7, which may be needed - * in case a system call gets restarted. - */ -GLOBAL_ENTRY(ia64_invoke_schedule_tail) - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8) - alloc loc1=ar.pfs,8,2,1,0 - mov loc0=rp - mov out0=r8 // Address of previous task - ;; - br.call.sptk.many rp=schedule_tail -.ret11: mov ar.pfs=loc1 - mov rp=loc0 - br.ret.sptk.many rp -END(ia64_invoke_schedule_tail) - - /* - * Setup stack and call do_notify_resume_user(). Note that pSys and pNonSys need to - * be set up by the caller. We declare 8 input registers so the system call - * args get preserved, in case we need to restart a system call. - */ -GLOBAL_ENTRY(notify_resume_user) - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8) - alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart! - mov r9=ar.unat - mov loc0=rp // save return address - mov out0=0 // there is no "oldset" - adds out1=8,sp // out1=&sigscratch->ar_pfs -(pSys) mov out2=1 // out2==1 => we're in a syscall - ;; -(pNonSys) mov out2=0 // out2==0 => not a syscall - .fframe 16 - .spillsp ar.unat, 16 - st8 [sp]=r9,-16 // allocate space for ar.unat and save it - st8 [out1]=loc1,-8 // save ar.pfs, out1=&sigscratch - .body - br.call.sptk.many rp=do_notify_resume_user -.ret15: .restore sp - adds sp=16,sp // pop scratch stack space - ;; - ld8 r9=[sp] // load new unat from sigscratch->scratch_unat - mov rp=loc0 - ;; - mov ar.unat=r9 - mov ar.pfs=loc1 - br.ret.sptk.many rp -END(notify_resume_user) - -GLOBAL_ENTRY(sys_rt_sigsuspend) - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8) - alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart! - mov r9=ar.unat - mov loc0=rp // save return address - mov out0=in0 // mask - mov out1=in1 // sigsetsize - adds out2=8,sp // out2=&sigscratch->ar_pfs - ;; - .fframe 16 - .spillsp ar.unat, 16 - st8 [sp]=r9,-16 // allocate space for ar.unat and save it - st8 [out2]=loc1,-8 // save ar.pfs, out2=&sigscratch - .body - br.call.sptk.many rp=ia64_rt_sigsuspend -.ret17: .restore sp - adds sp=16,sp // pop scratch stack space - ;; - ld8 r9=[sp] // load new unat from sw->caller_unat - mov rp=loc0 - ;; - mov ar.unat=r9 - mov ar.pfs=loc1 - br.ret.sptk.many rp -END(sys_rt_sigsuspend) - -ENTRY(sys_rt_sigreturn) - PT_REGS_UNWIND_INFO(0) - /* - * Allocate 8 input registers since ptrace() may clobber them - */ - alloc r2=ar.pfs,8,0,1,0 - .prologue - PT_REGS_SAVES(16) - adds sp=-16,sp - .body - cmp.eq pNonSys,pSys=r0,r0 // sigreturn isn't a normal syscall... - ;; - /* - * leave_kernel() restores f6-f11 from pt_regs, but since the streamlined - * syscall-entry path does not save them we save them here instead. Note: we - * don't need to save any other registers that are not saved by the stream-lined - * syscall path, because restore_sigcontext() restores them. - */ - adds r16=PT(F6)+32,sp - adds r17=PT(F7)+32,sp - ;; - stf.spill [r16]=f6,32 - stf.spill [r17]=f7,32 - ;; - stf.spill [r16]=f8,32 - stf.spill [r17]=f9,32 - ;; - stf.spill [r16]=f10 - stf.spill [r17]=f11 - adds out0=16,sp // out0 = &sigscratch - br.call.sptk.many rp=ia64_rt_sigreturn -.ret19: .restore sp,0 - adds sp=16,sp - ;; - ld8 r9=[sp] // load new ar.unat - mov.sptk b7=r8,__ia64_leave_kernel - ;; - mov ar.unat=r9 - br.many b7 -END(sys_rt_sigreturn) - -GLOBAL_ENTRY(ia64_prepare_handle_unaligned) - .prologue - /* - * r16 = fake ar.pfs, we simply need to make sure privilege is still 0 - */ - mov r16=r0 - DO_SAVE_SWITCH_STACK - br.call.sptk.many rp=ia64_handle_unaligned // stack frame setup in ivt -.ret21: .body - DO_LOAD_SWITCH_STACK - br.cond.sptk.many rp // goes to ia64_leave_kernel -END(ia64_prepare_handle_unaligned) - - // - // unw_init_running(void (*callback)(info, arg), void *arg) - // -# define EXTRA_FRAME_SIZE ((UNW_FRAME_INFO_SIZE+15)&~15) - -GLOBAL_ENTRY(unw_init_running) - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2) - alloc loc1=ar.pfs,2,3,3,0 - ;; - ld8 loc2=[in0],8 - mov loc0=rp - mov r16=loc1 - DO_SAVE_SWITCH_STACK - .body - - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2) - .fframe IA64_SWITCH_STACK_SIZE+EXTRA_FRAME_SIZE - SWITCH_STACK_SAVES(EXTRA_FRAME_SIZE) - adds sp=-EXTRA_FRAME_SIZE,sp - .body - ;; - adds out0=16,sp // &info - mov out1=r13 // current - adds out2=16+EXTRA_FRAME_SIZE,sp // &switch_stack - br.call.sptk.many rp=unw_init_frame_info -1: adds out0=16,sp // &info - mov b6=loc2 - mov loc2=gp // save gp across indirect function call - ;; - ld8 gp=[in0] - mov out1=in1 // arg - br.call.sptk.many rp=b6 // invoke the callback function -1: mov gp=loc2 // restore gp - - // For now, we don't allow changing registers from within - // unw_init_running; if we ever want to allow that, we'd - // have to do a load_switch_stack here: - .restore sp - adds sp=IA64_SWITCH_STACK_SIZE+EXTRA_FRAME_SIZE,sp - - mov ar.pfs=loc1 - mov rp=loc0 - br.ret.sptk.many rp -END(unw_init_running) - - .rodata - .align 8 - .globl sys_call_table -sys_call_table: - data8 sys_ni_syscall // This must be sys_ni_syscall! See ivt.S. - data8 sys_exit // 1025 - data8 sys_read - data8 sys_write - data8 sys_open - data8 sys_close - data8 sys_creat // 1030 - data8 sys_link - data8 sys_unlink - data8 ia64_execve - data8 sys_chdir - data8 sys_fchdir // 1035 - data8 sys_utimes - data8 sys_mknod - data8 sys_chmod - data8 sys_chown - data8 sys_lseek // 1040 - data8 sys_getpid - data8 sys_getppid - data8 sys_mount - data8 sys_umount - data8 sys_setuid // 1045 - data8 sys_getuid - data8 sys_geteuid - data8 sys_ptrace - data8 sys_access - data8 sys_sync // 1050 - data8 sys_fsync - data8 sys_fdatasync - data8 sys_kill - data8 sys_rename - data8 sys_mkdir // 1055 - data8 sys_rmdir - data8 sys_dup - data8 sys_pipe - data8 sys_times - data8 ia64_brk // 1060 - data8 sys_setgid - data8 sys_getgid - data8 sys_getegid - data8 sys_acct - data8 sys_ioctl // 1065 - data8 sys_fcntl - data8 sys_umask - data8 sys_chroot - data8 sys_ustat - data8 sys_dup2 // 1070 - data8 sys_setreuid - data8 sys_setregid - data8 sys_getresuid - data8 sys_setresuid - data8 sys_getresgid // 1075 - data8 sys_setresgid - data8 sys_getgroups - data8 sys_setgroups - data8 sys_getpgid - data8 sys_setpgid // 1080 - data8 sys_setsid - data8 sys_getsid - data8 sys_sethostname - data8 sys_setrlimit - data8 sys_getrlimit // 1085 - data8 sys_getrusage - data8 sys_gettimeofday - data8 sys_settimeofday - data8 sys_select - data8 sys_poll // 1090 - data8 sys_symlink - data8 sys_readlink - data8 sys_uselib - data8 sys_swapon - data8 sys_swapoff // 1095 - data8 sys_reboot - data8 sys_truncate - data8 sys_ftruncate - data8 sys_fchmod - data8 sys_fchown // 1100 - data8 ia64_getpriority - data8 sys_setpriority - data8 sys_statfs - data8 sys_fstatfs - data8 sys_gettid // 1105 - data8 sys_semget - data8 sys_semop - data8 sys_semctl - data8 sys_msgget - data8 sys_msgsnd // 1110 - data8 sys_msgrcv - data8 sys_msgctl - data8 sys_shmget - data8 sys_shmat - data8 sys_shmdt // 1115 - data8 sys_shmctl - data8 sys_syslog - data8 sys_setitimer - data8 sys_getitimer - data8 sys_ni_syscall // 1120 /* was: ia64_oldstat */ - data8 sys_ni_syscall /* was: ia64_oldlstat */ - data8 sys_ni_syscall /* was: ia64_oldfstat */ - data8 sys_vhangup - data8 sys_lchown - data8 sys_remap_file_pages // 1125 - data8 sys_wait4 - data8 sys_sysinfo - data8 sys_clone - data8 sys_setdomainname - data8 sys_newuname // 1130 - data8 sys_adjtimex - data8 sys_ni_syscall /* was: ia64_create_module */ - data8 sys_init_module - data8 sys_delete_module - data8 sys_ni_syscall // 1135 /* was: sys_get_kernel_syms */ - data8 sys_ni_syscall /* was: sys_query_module */ - data8 sys_quotactl - data8 sys_bdflush - data8 sys_sysfs - data8 sys_personality // 1140 - data8 sys_ni_syscall // sys_afs_syscall - data8 sys_setfsuid - data8 sys_setfsgid - data8 sys_getdents - data8 sys_flock // 1145 - data8 sys_readv - data8 sys_writev - data8 sys_pread64 - data8 sys_pwrite64 - data8 sys_sysctl // 1150 - data8 sys_mmap - data8 sys_munmap - data8 sys_mlock - data8 sys_mlockall - data8 sys_mprotect // 1155 - data8 ia64_mremap - data8 sys_msync - data8 sys_munlock - data8 sys_munlockall - data8 sys_sched_getparam // 1160 - data8 sys_sched_setparam - data8 sys_sched_getscheduler - data8 sys_sched_setscheduler - data8 sys_sched_yield - data8 sys_sched_get_priority_max // 1165 - data8 sys_sched_get_priority_min - data8 sys_sched_rr_get_interval - data8 sys_nanosleep - data8 sys_nfsservctl - data8 sys_prctl // 1170 - data8 sys_getpagesize - data8 sys_mmap2 - data8 sys_pciconfig_read - data8 sys_pciconfig_write - data8 sys_perfmonctl // 1175 - data8 sys_sigaltstack - data8 sys_rt_sigaction - data8 sys_rt_sigpending - data8 sys_rt_sigprocmask - data8 sys_rt_sigqueueinfo // 1180 - data8 sys_rt_sigreturn - data8 sys_rt_sigsuspend - data8 sys_rt_sigtimedwait - data8 sys_getcwd - data8 sys_capget // 1185 - data8 sys_capset - data8 sys_sendfile64 - data8 sys_ni_syscall // sys_getpmsg (STREAMS) - data8 sys_ni_syscall // sys_putpmsg (STREAMS) - data8 sys_socket // 1190 - data8 sys_bind - data8 sys_connect - data8 sys_listen - data8 sys_accept - data8 sys_getsockname // 1195 - data8 sys_getpeername - data8 sys_socketpair - data8 sys_send - data8 sys_sendto - data8 sys_recv // 1200 - data8 sys_recvfrom - data8 sys_shutdown - data8 sys_setsockopt - data8 sys_getsockopt - data8 sys_sendmsg // 1205 - data8 sys_recvmsg - data8 sys_pivot_root - data8 sys_mincore - data8 sys_madvise - data8 sys_newstat // 1210 - data8 sys_newlstat - data8 sys_newfstat - data8 sys_clone2 - data8 sys_getdents64 - data8 sys_getunwind // 1215 - data8 sys_readahead - data8 sys_setxattr - data8 sys_lsetxattr - data8 sys_fsetxattr - data8 sys_getxattr // 1220 - data8 sys_lgetxattr - data8 sys_fgetxattr - data8 sys_listxattr - data8 sys_llistxattr - data8 sys_flistxattr // 1225 - data8 sys_removexattr - data8 sys_lremovexattr - data8 sys_fremovexattr - data8 sys_tkill - data8 sys_futex // 1230 - data8 sys_sched_setaffinity - data8 sys_sched_getaffinity - data8 sys_set_tid_address - data8 sys_fadvise64_64 - data8 sys_tgkill // 1235 - data8 sys_exit_group - data8 sys_lookup_dcookie - data8 sys_io_setup - data8 sys_io_destroy - data8 sys_io_getevents // 1240 - data8 sys_io_submit - data8 sys_io_cancel - data8 sys_epoll_create - data8 sys_epoll_ctl - data8 sys_epoll_wait // 1245 - data8 sys_restart_syscall - data8 sys_semtimedop - data8 sys_timer_create - data8 sys_timer_settime - data8 sys_timer_gettime // 1250 - data8 sys_timer_getoverrun - data8 sys_timer_delete - data8 sys_clock_settime - data8 sys_clock_gettime - data8 sys_clock_getres // 1255 - data8 sys_clock_nanosleep - data8 sys_fstatfs64 - data8 sys_statfs64 - data8 sys_mbind - data8 sys_get_mempolicy // 1260 - data8 sys_set_mempolicy - data8 sys_mq_open - data8 sys_mq_unlink - data8 sys_mq_timedsend - data8 sys_mq_timedreceive // 1265 - data8 sys_mq_notify - data8 sys_mq_getsetattr - data8 sys_ni_syscall // reserved for kexec_load - data8 sys_ni_syscall // reserved for vserver - data8 sys_waitid // 1270 - data8 sys_add_key - data8 sys_request_key - data8 sys_keyctl - data8 sys_ioprio_set - data8 sys_ioprio_get // 1275 - data8 sys_move_pages - data8 sys_inotify_init - data8 sys_inotify_add_watch - data8 sys_inotify_rm_watch - data8 sys_migrate_pages // 1280 - data8 sys_openat - data8 sys_mkdirat - data8 sys_mknodat - data8 sys_fchownat - data8 sys_futimesat // 1285 - data8 sys_newfstatat - data8 sys_unlinkat - data8 sys_renameat - data8 sys_linkat - data8 sys_symlinkat // 1290 - data8 sys_readlinkat - data8 sys_fchmodat - data8 sys_faccessat - data8 sys_ni_syscall // reserved for pselect - data8 sys_ni_syscall // 1295 reserved for ppoll - data8 sys_unshare - data8 sys_splice - data8 sys_ni_syscall // reserved for set_robust_list - data8 sys_ni_syscall // reserved for get_robust_list - data8 sys_sync_file_range // 1300 - data8 sys_tee - data8 sys_vmsplice - - .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls |