/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 1999,2000,2001,2002,2003,2005,2006,2007,2009,2010 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see .
*/
#include
/*
* Note: These functions defined in this file may be called from C.
* Be careful of that you must not modify some registers. Quote
* from gcc-2.95.2/gcc/config/i386/i386.h:
1 for registers not available across function calls.
These must include the FIXED_REGISTERS and also any
registers that can be used without being saved.
The latter must include the registers where values are returned
and the register where structure-value addresses are passed.
Aside from that, you can include as many other registers as you like.
ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7,arg
{ 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }
*/
/*
* Note: GRUB is compiled with the options -mrtd and -mregparm=3.
* So the first three arguments are passed in %eax, %edx, and %ecx,
* respectively, and if a function has a fixed number of arguments
* and the number if greater than three, the function must return
* with "ret $N" where N is ((the number of arguments) - 3) * 4.
*/
/*
* This is the area for all of the special variables.
*/
.p2align 2 /* force 4-byte alignment */
protstack:
.long GRUB_MEMORY_MACHINE_PROT_STACK
/*
* This is the Global Descriptor Table
*
* An entry, a "Segment Descriptor", looks like this:
*
* 31 24 19 16 7 0
* ------------------------------------------------------------
* | | |B| |A| | | |1|0|E|W|A| |
* | BASE 31..24 |G|/|L|V| LIMIT |P|DPL| TYPE | BASE 23:16 | 4
* | | |D| |L| 19..16| | |1|1|C|R|A| |
* ------------------------------------------------------------
* | | |
* | BASE 15..0 | LIMIT 15..0 | 0
* | | |
* ------------------------------------------------------------
*
* Note the ordering of the data items is reversed from the above
* description.
*/
.p2align 2 /* force 4-byte alignment */
gdt:
.word 0, 0
.byte 0, 0, 0, 0
/* -- code segment --
* base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
* type = 32bit code execute/read, DPL = 0
*/
.word 0xFFFF, 0
.byte 0, 0x9A, 0xCF, 0
/* -- data segment --
* base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
* type = 32 bit data read/write, DPL = 0
*/
.word 0xFFFF, 0
.byte 0, 0x92, 0xCF, 0
/* -- 16 bit real mode CS --
* base = 0x00000000, limit 0x0FFFF (1 B Granularity), present
* type = 16 bit code execute/read only/conforming, DPL = 0
*/
.word 0xFFFF, 0
.byte 0, 0x9E, 0, 0
/* -- 16 bit real mode DS --
* base = 0x00000000, limit 0x0FFFF (1 B Granularity), present
* type = 16 bit data read/write, DPL = 0
*/
.word 0xFFFF, 0
.byte 0, 0x92, 0, 0
/* this is the GDT descriptor */
gdtdesc:
.word 0x27 /* limit */
.long gdt /* addr */
/*
* These next two routines, "real_to_prot" and "prot_to_real" are structured
* in a very specific way. Be very careful when changing them.
*
* NOTE: Use of either one messes up %eax and %ebp.
*/
real_to_prot:
.code16
cli
/* load the GDT register */
xorw %ax, %ax
movw %ax, %ds
DATA32 ADDR32 lgdt gdtdesc
/* turn on protected mode */
movl %cr0, %eax
orl $GRUB_MEMORY_CPU_CR0_PE_ON, %eax
movl %eax, %cr0
/* jump to relocation, flush prefetch queue, and reload %cs */
DATA32 ljmp $GRUB_MEMORY_MACHINE_PROT_MODE_CSEG, $protcseg
.code32
protcseg:
/* reload other segment registers */
movw $GRUB_MEMORY_MACHINE_PROT_MODE_DSEG, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
/* put the return address in a known safe location */
movl (%esp), %eax
movl %eax, GRUB_MEMORY_MACHINE_REAL_STACK
/* get protected mode stack */
movl protstack, %eax
movl %eax, %esp
movl %eax, %ebp
/* get return address onto the right stack */
movl GRUB_MEMORY_MACHINE_REAL_STACK, %eax
movl %eax, (%esp)
/* zero %eax */
xorl %eax, %eax
/* return on the old (or initialized) stack! */
ret
prot_to_real:
/* just in case, set GDT */
lgdt gdtdesc
/* save the protected mode stack */
movl %esp, %eax
movl %eax, protstack
/* get the return address */
movl (%esp), %eax
movl %eax, GRUB_MEMORY_MACHINE_REAL_STACK
/* set up new stack */
movl $GRUB_MEMORY_MACHINE_REAL_STACK, %eax
movl %eax, %esp
movl %eax, %ebp
/* set up segment limits */
movw $GRUB_MEMORY_MACHINE_PSEUDO_REAL_DSEG, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
/* this might be an extra step */
/* jump to a 16 bit segment */
ljmp $GRUB_MEMORY_MACHINE_PSEUDO_REAL_CSEG, $tmpcseg
tmpcseg:
.code16
/* clear the PE bit of CR0 */
movl %cr0, %eax
andl $(~GRUB_MEMORY_CPU_CR0_PE_ON), %eax
movl %eax, %cr0
/* flush prefetch queue, reload %cs */
DATA32 ljmp $0, $realcseg
realcseg:
/* we are in real mode now
* set up the real mode segment registers : DS, SS, ES
*/
/* zero %eax */
xorl %eax, %eax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
#ifdef GRUB_MACHINE_PCBIOS
/* restore interrupts */
sti
#endif
/* return on new stack! */
DATA32 ret
.code32
/*
* grub_reboot()
*
* Reboot the system. At the moment, rely on BIOS.
*/
FUNCTION(grub_reboot)
call prot_to_real
.code16
cold_reboot:
/* set 0x472 to 0x0000 for cold boot (0x1234 for warm boot) */
movw $0x0472, %di
movw %ax, (%di)
ljmp $0xf000, $0xfff0
.code32