From 3f2546b2ef55b661fd8dd69682b38992225e86f6 Mon Sep 17 00:00:00 2001 From: fishsoupisgood Date: Mon, 29 Apr 2019 01:17:54 +0100 Subject: Initial import of qemu-2.4.1 --- .../doc/device-tree-bindings/misc/cros-ec.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 roms/u-boot/doc/device-tree-bindings/misc/cros-ec.txt (limited to 'roms/u-boot/doc/device-tree-bindings/misc') diff --git a/roms/u-boot/doc/device-tree-bindings/misc/cros-ec.txt b/roms/u-boot/doc/device-tree-bindings/misc/cros-ec.txt new file mode 100644 index 00000000..07ea7cde --- /dev/null +++ b/roms/u-boot/doc/device-tree-bindings/misc/cros-ec.txt @@ -0,0 +1,38 @@ +Chrome OS CROS_EC Binding +====================== + +The device tree node which describes the operation of the CROS_EC interface +is as follows: + +Required properties : +- compatible = "google,cros-ec" + +Optional properties : +- spi-max-frequency : Sets the maximum frequency (in Hz) for SPI bus + operation +- i2c-max-frequency : Sets the maximum frequency (in Hz) for I2C bus + operation +- ec-interrupt : Selects the EC interrupt, defined as a GPIO according + to the platform +- optimise-flash-write : Boolean property - if present then flash blocks + containing all 0xff will not be written, since we assume that the EC + uses that pattern for erased blocks + +The CROS_EC node should appear as a subnode of the interrupt that connects it +to the EC (e.g. i2c, spi, lpc). The reg property (as usual) will indicate +the unit address on that bus. + + +Example +======= + + spi@131b0000 { + cros-ec@0 { + reg = <0>; + compatible = "google,cros-ec"; + spi-max-frequency = <5000000>; + ec-interrupt = <&gpio 174 1>; + optimise-flash-write; + status = "disabled"; + }; + }; -- cgit v1.2.3