From 3f2546b2ef55b661fd8dd69682b38992225e86f6 Mon Sep 17 00:00:00 2001 From: fishsoupisgood Date: Mon, 29 Apr 2019 01:17:54 +0100 Subject: Initial import of qemu-2.4.1 --- roms/u-boot/doc/README.watchdog | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 roms/u-boot/doc/README.watchdog (limited to 'roms/u-boot/doc/README.watchdog') diff --git a/roms/u-boot/doc/README.watchdog b/roms/u-boot/doc/README.watchdog new file mode 100644 index 00000000..59f306b8 --- /dev/null +++ b/roms/u-boot/doc/README.watchdog @@ -0,0 +1,35 @@ +Watchdog driver general info + +CONFIG_HW_WATCHDOG + This enables hw_watchdog_reset to be called during various loops, + including waiting for a character on a serial port. But it + does not also call hw_watchdog_init. Boards which want this + enabled must call this function in their board file. This split + is useful because some rom's enable the watchdog when downloading + new code, so it must be serviced, but the board would rather it + was off. And, it cannot always be turned off once on. + +CONFIG_WATCHDOG_TIMEOUT_MSECS + Can be used to change the timeout for i.mx31/35/5x/6x. + If not given, will default to maximum timeout. This would + be 128000 msec for i.mx31/35/5x/6x. + +CONFIG_AT91SAM9_WATCHDOG + Available for AT91SAM9 to service the watchdog. + +CONFIG_FTWDT010_WATCHDOG + Available for FTWDT010 to service the watchdog. + +CONFIG_FTWDT010_HW_TIMEOUT + Can be used to change the timeout for FTWDT010. + +CONFIG_IMX_WATCHDOG + Available for i.mx31/35/5x/6x to service the watchdog. This is not + automatically set because some boards (vision2) still need to define + their own hw_watchdog_reset routine. + +CONFIG_XILINX_TB_WATCHDOG + Available for Xilinx Axi platforms to service timebase watchdog timer. + +CONFIG_BFIN_WATCHDOG + Available for bf5xx and bf6xx to service the watchdog. -- cgit v1.2.3