From 34945d78e933fc62bedcc975e88be02a0b7fcc2e Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Mon, 2 Aug 2021 13:48:35 -0400 Subject: major project reorg, move library one level up --- watch-library/include/instance/sercom0.h | 142 +++++++++++++++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 watch-library/include/instance/sercom0.h (limited to 'watch-library/include/instance/sercom0.h') diff --git a/watch-library/include/instance/sercom0.h b/watch-library/include/instance/sercom0.h new file mode 100644 index 00000000..7160d497 --- /dev/null +++ b/watch-library/include/instance/sercom0.h @@ -0,0 +1,142 @@ +/** + * \file + * + * \brief Instance description for SERCOM0 + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_SERCOM0_INSTANCE_ +#define _SAML22_SERCOM0_INSTANCE_ + +/* ========== Register definition for SERCOM0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SERCOM0_I2CM_CTRLA (0x42000400) /**< \brief (SERCOM0) I2CM Control A */ +#define REG_SERCOM0_I2CM_CTRLB (0x42000404) /**< \brief (SERCOM0) I2CM Control B */ +#define REG_SERCOM0_I2CM_BAUD (0x4200040C) /**< \brief (SERCOM0) I2CM Baud Rate */ +#define REG_SERCOM0_I2CM_INTENCLR (0x42000414) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */ +#define REG_SERCOM0_I2CM_INTENSET (0x42000416) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */ +#define REG_SERCOM0_I2CM_INTFLAG (0x42000418) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CM_STATUS (0x4200041A) /**< \brief (SERCOM0) I2CM Status */ +#define REG_SERCOM0_I2CM_SYNCBUSY (0x4200041C) /**< \brief (SERCOM0) I2CM Synchronization Busy */ +#define REG_SERCOM0_I2CM_ADDR (0x42000424) /**< \brief (SERCOM0) I2CM Address */ +#define REG_SERCOM0_I2CM_DATA (0x42000428) /**< \brief (SERCOM0) I2CM Data */ +#define REG_SERCOM0_I2CM_DBGCTRL (0x42000430) /**< \brief (SERCOM0) I2CM Debug Control */ +#define REG_SERCOM0_I2CS_CTRLA (0x42000400) /**< \brief (SERCOM0) I2CS Control A */ +#define REG_SERCOM0_I2CS_CTRLB (0x42000404) /**< \brief (SERCOM0) I2CS Control B */ +#define REG_SERCOM0_I2CS_INTENCLR (0x42000414) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */ +#define REG_SERCOM0_I2CS_INTENSET (0x42000416) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */ +#define REG_SERCOM0_I2CS_INTFLAG (0x42000418) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CS_STATUS (0x4200041A) /**< \brief (SERCOM0) I2CS Status */ +#define REG_SERCOM0_I2CS_SYNCBUSY (0x4200041C) /**< \brief (SERCOM0) I2CS Synchronization Busy */ +#define REG_SERCOM0_I2CS_ADDR (0x42000424) /**< \brief (SERCOM0) I2CS Address */ +#define REG_SERCOM0_I2CS_DATA (0x42000428) /**< \brief (SERCOM0) I2CS Data */ +#define REG_SERCOM0_SPI_CTRLA (0x42000400) /**< \brief (SERCOM0) SPI Control A */ +#define REG_SERCOM0_SPI_CTRLB (0x42000404) /**< \brief (SERCOM0) SPI Control B */ +#define REG_SERCOM0_SPI_BAUD (0x4200040C) /**< \brief (SERCOM0) SPI Baud Rate */ +#define REG_SERCOM0_SPI_INTENCLR (0x42000414) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */ +#define REG_SERCOM0_SPI_INTENSET (0x42000416) /**< \brief (SERCOM0) SPI Interrupt Enable Set */ +#define REG_SERCOM0_SPI_INTFLAG (0x42000418) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM0_SPI_STATUS (0x4200041A) /**< \brief (SERCOM0) SPI Status */ +#define REG_SERCOM0_SPI_SYNCBUSY (0x4200041C) /**< \brief (SERCOM0) SPI Synchronization Busy */ +#define REG_SERCOM0_SPI_ADDR (0x42000424) /**< \brief (SERCOM0) SPI Address */ +#define REG_SERCOM0_SPI_DATA (0x42000428) /**< \brief (SERCOM0) SPI Data */ +#define REG_SERCOM0_SPI_DBGCTRL (0x42000430) /**< \brief (SERCOM0) SPI Debug Control */ +#define REG_SERCOM0_USART_CTRLA (0x42000400) /**< \brief (SERCOM0) USART Control A */ +#define REG_SERCOM0_USART_CTRLB (0x42000404) /**< \brief (SERCOM0) USART Control B */ +#define REG_SERCOM0_USART_CTRLC (0x42000408) /**< \brief (SERCOM0) USART Control C */ +#define REG_SERCOM0_USART_BAUD (0x4200040C) /**< \brief (SERCOM0) USART Baud Rate */ +#define REG_SERCOM0_USART_RXPL (0x4200040E) /**< \brief (SERCOM0) USART Receive Pulse Length */ +#define REG_SERCOM0_USART_INTENCLR (0x42000414) /**< \brief (SERCOM0) USART Interrupt Enable Clear */ +#define REG_SERCOM0_USART_INTENSET (0x42000416) /**< \brief (SERCOM0) USART Interrupt Enable Set */ +#define REG_SERCOM0_USART_INTFLAG (0x42000418) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM0_USART_STATUS (0x4200041A) /**< \brief (SERCOM0) USART Status */ +#define REG_SERCOM0_USART_SYNCBUSY (0x4200041C) /**< \brief (SERCOM0) USART Synchronization Busy */ +#define REG_SERCOM0_USART_RXERRCNT (0x42000420) /**< \brief (SERCOM0) USART Receive Error Count */ +#define REG_SERCOM0_USART_DATA (0x42000428) /**< \brief (SERCOM0) USART Data */ +#define REG_SERCOM0_USART_DBGCTRL (0x42000430) /**< \brief (SERCOM0) USART Debug Control */ +#else +#define REG_SERCOM0_I2CM_CTRLA (*(RwReg *)0x42000400UL) /**< \brief (SERCOM0) I2CM Control A */ +#define REG_SERCOM0_I2CM_CTRLB (*(RwReg *)0x42000404UL) /**< \brief (SERCOM0) I2CM Control B */ +#define REG_SERCOM0_I2CM_BAUD (*(RwReg *)0x4200040CUL) /**< \brief (SERCOM0) I2CM Baud Rate */ +#define REG_SERCOM0_I2CM_INTENCLR (*(RwReg8 *)0x42000414UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */ +#define REG_SERCOM0_I2CM_INTENSET (*(RwReg8 *)0x42000416UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */ +#define REG_SERCOM0_I2CM_INTFLAG (*(RwReg8 *)0x42000418UL) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CM_STATUS (*(RwReg16*)0x4200041AUL) /**< \brief (SERCOM0) I2CM Status */ +#define REG_SERCOM0_I2CM_SYNCBUSY (*(RoReg *)0x4200041CUL) /**< \brief (SERCOM0) I2CM Synchronization Busy */ +#define REG_SERCOM0_I2CM_ADDR (*(RwReg *)0x42000424UL) /**< \brief (SERCOM0) I2CM Address */ +#define REG_SERCOM0_I2CM_DATA (*(RwReg8 *)0x42000428UL) /**< \brief (SERCOM0) I2CM Data */ +#define REG_SERCOM0_I2CM_DBGCTRL (*(RwReg8 *)0x42000430UL) /**< \brief (SERCOM0) I2CM Debug Control */ +#define REG_SERCOM0_I2CS_CTRLA (*(RwReg *)0x42000400UL) /**< \brief (SERCOM0) I2CS Control A */ +#define REG_SERCOM0_I2CS_CTRLB (*(RwReg *)0x42000404UL) /**< \brief (SERCOM0) I2CS Control B */ +#define REG_SERCOM0_I2CS_INTENCLR (*(RwReg8 *)0x42000414UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */ +#define REG_SERCOM0_I2CS_INTENSET (*(RwReg8 *)0x42000416UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */ +#define REG_SERCOM0_I2CS_INTFLAG (*(RwReg8 *)0x42000418UL) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CS_STATUS (*(RwReg16*)0x4200041AUL) /**< \brief (SERCOM0) I2CS Status */ +#define REG_SERCOM0_I2CS_SYNCBUSY (*(RoReg *)0x4200041CUL) /**< \brief (SERCOM0) I2CS Synchronization Busy */ +#define REG_SERCOM0_I2CS_ADDR (*(RwReg *)0x42000424UL) /**< \brief (SERCOM0) I2CS Address */ +#define REG_SERCOM0_I2CS_DATA (*(RwReg8 *)0x42000428UL) /**< \brief (SERCOM0) I2CS Data */ +#define REG_SERCOM0_SPI_CTRLA (*(RwReg *)0x42000400UL) /**< \brief (SERCOM0) SPI Control A */ +#define REG_SERCOM0_SPI_CTRLB (*(RwReg *)0x42000404UL) /**< \brief (SERCOM0) SPI Control B */ +#define REG_SERCOM0_SPI_BAUD (*(RwReg8 *)0x4200040CUL) /**< \brief (SERCOM0) SPI Baud Rate */ +#define REG_SERCOM0_SPI_INTENCLR (*(RwReg8 *)0x42000414UL) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */ +#define REG_SERCOM0_SPI_INTENSET (*(RwReg8 *)0x42000416UL) /**< \brief (SERCOM0) SPI Interrupt Enable Set */ +#define REG_SERCOM0_SPI_INTFLAG (*(RwReg8 *)0x42000418UL) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM0_SPI_STATUS (*(RwReg16*)0x4200041AUL) /**< \brief (SERCOM0) SPI Status */ +#define REG_SERCOM0_SPI_SYNCBUSY (*(RoReg *)0x4200041CUL) /**< \brief (SERCOM0) SPI Synchronization Busy */ +#define REG_SERCOM0_SPI_ADDR (*(RwReg *)0x42000424UL) /**< \brief (SERCOM0) SPI Address */ +#define REG_SERCOM0_SPI_DATA (*(RwReg *)0x42000428UL) /**< \brief (SERCOM0) SPI Data */ +#define REG_SERCOM0_SPI_DBGCTRL (*(RwReg8 *)0x42000430UL) /**< \brief (SERCOM0) SPI Debug Control */ +#define REG_SERCOM0_USART_CTRLA (*(RwReg *)0x42000400UL) /**< \brief (SERCOM0) USART Control A */ +#define REG_SERCOM0_USART_CTRLB (*(RwReg *)0x42000404UL) /**< \brief (SERCOM0) USART Control B */ +#define REG_SERCOM0_USART_CTRLC (*(RwReg *)0x42000408UL) /**< \brief (SERCOM0) USART Control C */ +#define REG_SERCOM0_USART_BAUD (*(RwReg16*)0x4200040CUL) /**< \brief (SERCOM0) USART Baud Rate */ +#define REG_SERCOM0_USART_RXPL (*(RwReg8 *)0x4200040EUL) /**< \brief (SERCOM0) USART Receive Pulse Length */ +#define REG_SERCOM0_USART_INTENCLR (*(RwReg8 *)0x42000414UL) /**< \brief (SERCOM0) USART Interrupt Enable Clear */ +#define REG_SERCOM0_USART_INTENSET (*(RwReg8 *)0x42000416UL) /**< \brief (SERCOM0) USART Interrupt Enable Set */ +#define REG_SERCOM0_USART_INTFLAG (*(RwReg8 *)0x42000418UL) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM0_USART_STATUS (*(RwReg16*)0x4200041AUL) /**< \brief (SERCOM0) USART Status */ +#define REG_SERCOM0_USART_SYNCBUSY (*(RoReg *)0x4200041CUL) /**< \brief (SERCOM0) USART Synchronization Busy */ +#define REG_SERCOM0_USART_RXERRCNT (*(RoReg8 *)0x42000420UL) /**< \brief (SERCOM0) USART Receive Error Count */ +#define REG_SERCOM0_USART_DATA (*(RwReg16*)0x42000428UL) /**< \brief (SERCOM0) USART Data */ +#define REG_SERCOM0_USART_DBGCTRL (*(RwReg8 *)0x42000430UL) /**< \brief (SERCOM0) USART Debug Control */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SERCOM0 peripheral ========== */ +#define SERCOM0_DMAC_ID_RX 2 // Index of DMA RX trigger +#define SERCOM0_DMAC_ID_TX 3 // Index of DMA TX trigger +#define SERCOM0_GCLK_ID_CORE 16 +#define SERCOM0_GCLK_ID_SLOW 15 +#define SERCOM0_INT_MSB 6 +#define SERCOM0_PMSB 3 +#define SERCOM0_SPI 1 // SPI mode implemented? +#define SERCOM0_TWIM 0 // TWI Master mode implemented? +#define SERCOM0_TWIS 0 // TWI Slave mode implemented? +#define SERCOM0_TWI_HSMODE 0 // TWI HighSpeed mode implemented? +#define SERCOM0_USART 1 // USART mode implemented? +#define SERCOM0_USART_ISO7816 1 // USART ISO7816 mode implemented? +#define SERCOM0_USART_LIN_MASTER 0 // USART LIN Master mode implemented? +#define SERCOM0_USART_RS485 1 // USART RS485 mode implemented? + +#endif /* _SAML22_SERCOM0_INSTANCE_ */ -- cgit v1.2.3