From b8de35658ffd78ad8b22f91ccbbd3d63663afda9 Mon Sep 17 00:00:00 2001 From: Alexsander Akers Date: Tue, 25 Jan 2022 15:03:22 -0500 Subject: Sensor Watch Simulator (#35) * Put something on screen * Use the 32bit watch_date_time repr to pass from JS * Implement periodic callbacks * Clear display on enabling * Hook up watch_set_led_color() to SVG (green-only) * Make debug output full-width * Remove default Emscripten canvas * Implement sleep and button clicks * Fix time zone conversion bug in beats-time app * Clean up warnings * Fix pin levels * Set time zone to browser value (if available) * Add basic backup data saving * Silence format specifier warnings in both targets * Remove unnecessary, copied files * Use RTC pointer to clear callbacks (if available) * Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES * Change each face to const preprocessor definition * Remove Intl.DateTimeFormat usage * Update shell.html title, header * Add touch start/end event handlers on SVG buttons * Update shell.html * Update folder structure (shared, simulator, hardware under watch-library) * Tease out shared components from watch_slcd * Clean up simulator watch_slcd.c inline JS calls * Fix missing newlines at end of file * Add simulator warnings (except format, unused-paremter) * Implement remaining watch_rtc functions * Fix button bug on mouse down then drag out * Implement remaining watch_slcd functions * Link keyboard events to buttons (for keys A, L, M) * Rewrite event handling (mouse, touch, keyboard) in C * Set explicit text UTF-8 charset in shell.html * Address PR comments * Remove unused directories from include paths --- watch-library/hal/include/hal_i2c_m_sync.h | 244 ----------------------------- 1 file changed, 244 deletions(-) delete mode 100644 watch-library/hal/include/hal_i2c_m_sync.h (limited to 'watch-library/hal/include/hal_i2c_m_sync.h') diff --git a/watch-library/hal/include/hal_i2c_m_sync.h b/watch-library/hal/include/hal_i2c_m_sync.h deleted file mode 100644 index f7772483..00000000 --- a/watch-library/hal/include/hal_i2c_m_sync.h +++ /dev/null @@ -1,244 +0,0 @@ -/** - * \file - * - * \brief Sync I2C Hardware Abstraction Layer(HAL) declaration. - * - * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries. - * - * \asf_license_start - * - * \page License - * - * Subject to your compliance with these terms, you may use Microchip - * software and any derivatives exclusively with Microchip products. - * It is your responsibility to comply with third party license terms applicable - * to your use of third party software (including open source software) that - * may accompany Microchip software. - * - * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, - * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, - * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, - * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE - * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL - * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE - * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE - * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT - * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY - * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, - * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. - * - * \asf_license_stop - * - */ - -#ifndef _HAL_I2C_M_SYNC_H_INCLUDED -#define _HAL_I2C_M_SYNC_H_INCLUDED - -#include -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * \addtogroup doc_driver_hal_i2c_controller_sync - * - * @{ - */ - -#define I2C_M_MAX_RETRY 1 - -/** - * \brief I2C descriptor structure, embed i2c_device & i2c_interface - */ -struct i2c_m_sync_desc { - struct _i2c_m_sync_device device; - struct io_descriptor io; - uint16_t periph_addr; -}; - -/** - * \brief Initialize synchronous I2C interface - * - * This function initializes the given I/O descriptor to be used as a - * synchronous I2C interface descriptor. - * It checks if the given hardware is not initialized and if the given hardware - * is permitted to be initialized. - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * \param[in] hw The pointer to hardware instance - * - * \return Initialization status. - * \retval -1 The passed parameters were invalid or the interface is already initialized - * \retval 0 The initialization is completed successfully - */ -int32_t i2c_m_sync_init(struct i2c_m_sync_desc *i2c, void *hw); - -/** - * \brief Deinitialize I2C interface - * - * This function deinitializes the given I/O descriptor. - * It checks if the given hardware is initialized and if the given hardware is permitted to be deinitialized. - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * - * \return Uninitialization status. - * \retval -1 The passed parameters were invalid or the interface is already deinitialized - * \retval 0 The de-initialization is completed successfully - */ -int32_t i2c_m_sync_deinit(struct i2c_m_sync_desc *i2c); - -/** - * \brief Set the peripheral device address - * - * This function sets the next transfer target peripheral I2C device address. - * It takes no effect to any already started access. - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * \param[in] addr The peripheral address to access - * \param[in] addr_len The peripheral address length, can be I2C_M_TEN or I2C_M_SEVEN - * - * \return Masked peripheral address. The mask is a maximum 10-bit address, and 10th - * bit is set if a 10-bit address is used - */ -int32_t i2c_m_sync_set_periphaddr(struct i2c_m_sync_desc *i2c, int16_t addr, int32_t addr_len); - -/** - * \brief Set baudrate - * - * This function sets the I2C device to the specified baudrate. - * It only takes effect when the hardware is disabled. - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * \param[in] clkrate Unused parameter. Should always be 0 - * \param[in] baudrate The baudrate value set to controller - * - * \return Whether successfully set the baudrate - * \retval -1 The passed parameters were invalid or the device is already enabled - * \retval 0 The baudrate set is completed successfully - */ -int32_t i2c_m_sync_set_baudrate(struct i2c_m_sync_desc *i2c, uint32_t clkrate, uint32_t baudrate); - -/** - * \brief Sync version of enable hardware - * - * This function enables the I2C device, and then waits for this enabling operation to be done - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * - * \return Whether successfully enable the device - * \retval -1 The passed parameters were invalid or the device enable failed - * \retval 0 The hardware enabling is completed successfully - */ -int32_t i2c_m_sync_enable(struct i2c_m_sync_desc *i2c); - -/** - * \brief Sync version of disable hardware - * - * This function disables the I2C device and then waits for this disabling operation to be done - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * - * \return Whether successfully disable the device - * \retval -1 The passed parameters were invalid or the device disable failed - * \retval 0 The hardware disabling is completed successfully - */ -int32_t i2c_m_sync_disable(struct i2c_m_sync_desc *i2c); - -/** - * \brief Sync version of write command to I2C peripheral - * - * This function will write the value to a specified register in the I2C peripheral device and - * then wait for this operation to be done. - * - * The sequence of this routine is - * sta->address(write)->ack->reg address->ack->resta->address(write)->ack->reg value->nack->stt - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * \param[in] reg The internal address/register of the I2C peripheral device - * \param[in] buffer The buffer holding data to write to the I2C peripheral device - * \param[in] length The length (in bytes) to write to the I2C peripheral device - * - * \return Whether successfully write to the device - * \retval <0 The passed parameters were invalid or write fail - * \retval 0 Writing to register is completed successfully - */ -int32_t i2c_m_sync_cmd_write(struct i2c_m_sync_desc *i2c, uint8_t reg, uint8_t *buffer, uint8_t length); - -/** - * \brief Sync version of read register value from I2C peripheral - * - * This function will read a byte value from a specified register in the I2C peripheral device and - * then wait for this operation to be done. - * - * The sequence of this routine is - * sta->address(write)->ack->reg address->ack->resta->address(read)->ack->reg value->nack->stt - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * \param[in] reg The internal address/register of the I2C peripheral device - * \param[in] buffer The buffer to hold the read data from the I2C peripheral device - * \param[in] length The length (in bytes) to read from the I2C peripheral device - * - * \return Whether successfully read from the device - * \retval <0 The passed parameters were invalid or read fail - * \retval 0 Reading from register is completed successfully - */ -int32_t i2c_m_sync_cmd_read(struct i2c_m_sync_desc *i2c, uint8_t reg, uint8_t *buffer, uint8_t length); - -/** - * \brief Sync version of transfer message to/from the I2C peripheral - * - * This function will transfer a message between the I2C peripheral and the controller. - * This function will wait for the operation to be done. - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * \param[in] msg An i2c_m_msg struct - * - * \return The status of the operation - * \retval 0 Operation completed successfully - * \retval <0 Operation failed - */ -int32_t i2c_m_sync_transfer(struct i2c_m_sync_desc *const i2c, struct _i2c_m_msg *msg); - -/** - * \brief Sync version of send stop condition on the i2c bus - * - * This function will create a stop condition on the i2c bus to release the bus - * - * \param[in] i2c An I2C descriptor, which is used to communicate through I2C - * - * \return The status of the operation - * \retval 0 Operation completed successfully - * \retval <0 Operation failed - */ -int32_t i2c_m_sync_send_stop(struct i2c_m_sync_desc *const i2c); - -/** - * \brief Return I/O descriptor for this I2C instance - * - * This function will return a I/O instance for this I2C driver instance - * - * \param[in] i2c_m_sync_desc An I2C descriptor, which is used to communicate through I2C - * \param[in] io_descriptor A pointer to an I/O descriptor pointer type - * - * \return Error code - * \retval 0 No error detected - * \retval <0 Error code - */ -int32_t i2c_m_sync_get_io_descriptor(struct i2c_m_sync_desc *const i2c, struct io_descriptor **io); - -/** - * \brief Retrieve the current driver version - * - * \return Current driver version. - */ -uint32_t i2c_m_sync_get_version(void); - -/**@}*/ - -#ifdef __cplusplus -} -#endif - -#endif -- cgit v1.2.3