From 34945d78e933fc62bedcc975e88be02a0b7fcc2e Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Mon, 2 Aug 2021 13:48:35 -0400 Subject: major project reorg, move library one level up --- watch-library/config/hpl_dmac_config.h | 3122 ++++++++++++++++++++++++++++++++ 1 file changed, 3122 insertions(+) create mode 100644 watch-library/config/hpl_dmac_config.h (limited to 'watch-library/config/hpl_dmac_config.h') diff --git a/watch-library/config/hpl_dmac_config.h b/watch-library/config/hpl_dmac_config.h new file mode 100644 index 00000000..36adb88b --- /dev/null +++ b/watch-library/config/hpl_dmac_config.h @@ -0,0 +1,3122 @@ +/* Auto-generated config file hpl_dmac_config.h */ +#ifndef HPL_DMAC_CONFIG_H +#define HPL_DMAC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// DMAC enable +// Indicates whether dmac is enabled or not +// dmac_enable +#ifndef CONF_DMAC_ENABLE +#define CONF_DMAC_ENABLE 0 +#endif + +// Priority Level 0 +// Indicates whether Priority Level 0 is enabled or not +// dmac_lvlen0 +#ifndef CONF_DMAC_LVLEN0 +#define CONF_DMAC_LVLEN0 0 +#endif + +// Level 0 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 0 +// <1=> Round-robin arbitration scheme for channel with priority 0 +// Defines Level 0 Arbitration for DMA channels +// dmac_rrlvlen0 +#ifndef CONF_DMAC_RRLVLEN0 +#define CONF_DMAC_RRLVLEN0 0 +#endif + +// Level 0 Channel Priority Number <0x00-0xFF> +// dmac_lvlpri0 +#ifndef CONF_DMAC_LVLPRI0 +#define CONF_DMAC_LVLPRI0 0 +#endif + +// Priority Level 1 +// Indicates whether Priority Level 1 is enabled or not +// dmac_lvlen1 +#ifndef CONF_DMAC_LVLEN1 +#define CONF_DMAC_LVLEN1 0 +#endif + +// Level 1 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 1 +// <1=> Round-robin arbitration scheme for channel with priority 1 +// Defines Level 1 Arbitration for DMA channels +// dmac_rrlvlen1 +#ifndef CONF_DMAC_RRLVLEN1 +#define CONF_DMAC_RRLVLEN1 0 +#endif + +// Level 1 Channel Priority Number <0x00-0xFF> +// dmac_lvlpri1 +#ifndef CONF_DMAC_LVLPRI1 +#define CONF_DMAC_LVLPRI1 0 +#endif + +// Priority Level 2 +// Indicates whether Priority Level 2 is enabled or not +// dmac_lvlen2 +#ifndef CONF_DMAC_LVLEN2 +#define CONF_DMAC_LVLEN2 0 +#endif + +// Level 2 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 2 +// <1=> Round-robin arbitration scheme for channel with priority 2 +// Defines Level 2 Arbitration for DMA channels +// dmac_rrlvlen2 +#ifndef CONF_DMAC_RRLVLEN2 +#define CONF_DMAC_RRLVLEN2 0 +#endif + +// Level 2 Channel Priority Number <0x00-0xFF> +// dmac_lvlpri2 +#ifndef CONF_DMAC_LVLPRI2 +#define CONF_DMAC_LVLPRI2 0 +#endif + +// Priority Level 3 +// Indicates whether Priority Level 3 is enabled or not +// dmac_lvlen3 +#ifndef CONF_DMAC_LVLEN3 +#define CONF_DMAC_LVLEN3 0 +#endif + +// Level 3 Round-Robin Arbitration +// <0=> Static arbitration scheme for channel with priority 3 +// <1=> Round-robin arbitration scheme for channel with priority 3 +// Defines Level 3 Arbitration for DMA channels +// dmac_rrlvlen3 +#ifndef CONF_DMAC_RRLVLEN3 +#define CONF_DMAC_RRLVLEN3 0 +#endif + +// Level 3 Channel Priority Number <0x00-0xFF> +// dmac_lvlpri3 +#ifndef CONF_DMAC_LVLPRI3 +#define CONF_DMAC_LVLPRI3 0 +#endif + +// Data Transfer Quality of Service +// <0=> Background (no sensitive operation) +// <1=> Sensitive bandwidth +// <2=> Sensitive latency +// <3=> Critical latency +// Defines the memory priority access during the data transfer operation +// dmac_dqos +#ifndef CONF_DMAC_DQOS +#define CONF_DMAC_DQOS 0 +#endif + +// Fetch Quality of Service +// <0=> Background (no sensitive operation) +// <1=> Sensitive bandwidth +// <2=> Sensitive latency +// <3=> Critical latency +// Defines the memory priority access during the fetch operation +// dmac_fqos +#ifndef CONF_DMAC_FQOS +#define CONF_DMAC_FQOS 0 +#endif + +// Write-Back Quality of Service +// <0=> Background (no sensitive operation) +// <1=> Sensitive bandwidth +// <2=> Sensitive latency +// <3=> Critical latency +// Defines the memory priority access during the write-back operation +// dmac_wrbqos +#ifndef CONF_DMAC_WRBQOS +#define CONF_DMAC_WRBQOS 0 +#endif + +// Debug Run +// Indicates whether Debug Run is enabled or not +// dmac_dbgrun +#ifndef CONF_DMAC_DBGRUN +#define CONF_DMAC_DBGRUN 0 +#endif + +// Channel 0 settings +// dmac_channel_0_settings +#ifndef CONF_DMAC_CHANNEL_0_SETTINGS +#define CONF_DMAC_CHANNEL_0_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 0 is enabled or not +// dmac_enable_0 +#ifndef CONF_DMAC_ENABLE_0 +#define CONF_DMAC_ENABLE_0 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 0 is running in standby mode or not +// dmac_runstdby_0 +#ifndef CONF_DMAC_RUNSTDBY_0 +#define CONF_DMAC_RUNSTDBY_0 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_0 +#ifndef CONF_DMAC_TRIGACT_0 +#define CONF_DMAC_TRIGACT_0 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_0 +#ifndef CONF_DMAC_TRIGSRC_0 +#define CONF_DMAC_TRIGSRC_0 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_0 +#ifndef CONF_DMAC_LVL_0 +#define CONF_DMAC_LVL_0 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_0 +#ifndef CONF_DMAC_EVOE_0 +#define CONF_DMAC_EVOE_0 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_0 +#ifndef CONF_DMAC_EVIE_0 +#define CONF_DMAC_EVIE_0 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_0 +#ifndef CONF_DMAC_EVACT_0 +#define CONF_DMAC_EVACT_0 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_0 +#ifndef CONF_DMAC_STEPSIZE_0 +#define CONF_DMAC_STEPSIZE_0 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_0 +#ifndef CONF_DMAC_STEPSEL_0 +#define CONF_DMAC_STEPSEL_0 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_0 +#ifndef CONF_DMAC_SRCINC_0 +#define CONF_DMAC_SRCINC_0 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_0 +#ifndef CONF_DMAC_DSTINC_0 +#define CONF_DMAC_DSTINC_0 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_0 +#ifndef CONF_DMAC_BEATSIZE_0 +#define CONF_DMAC_BEATSIZE_0 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_0 +#ifndef CONF_DMAC_BLOCKACT_0 +#define CONF_DMAC_BLOCKACT_0 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_0 +#ifndef CONF_DMAC_EVOSEL_0 +#define CONF_DMAC_EVOSEL_0 0 +#endif +// + +// Channel 1 settings +// dmac_channel_1_settings +#ifndef CONF_DMAC_CHANNEL_1_SETTINGS +#define CONF_DMAC_CHANNEL_1_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 1 is enabled or not +// dmac_enable_1 +#ifndef CONF_DMAC_ENABLE_1 +#define CONF_DMAC_ENABLE_1 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 1 is running in standby mode or not +// dmac_runstdby_1 +#ifndef CONF_DMAC_RUNSTDBY_1 +#define CONF_DMAC_RUNSTDBY_1 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_1 +#ifndef CONF_DMAC_TRIGACT_1 +#define CONF_DMAC_TRIGACT_1 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_1 +#ifndef CONF_DMAC_TRIGSRC_1 +#define CONF_DMAC_TRIGSRC_1 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_1 +#ifndef CONF_DMAC_LVL_1 +#define CONF_DMAC_LVL_1 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_1 +#ifndef CONF_DMAC_EVOE_1 +#define CONF_DMAC_EVOE_1 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_1 +#ifndef CONF_DMAC_EVIE_1 +#define CONF_DMAC_EVIE_1 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_1 +#ifndef CONF_DMAC_EVACT_1 +#define CONF_DMAC_EVACT_1 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_1 +#ifndef CONF_DMAC_STEPSIZE_1 +#define CONF_DMAC_STEPSIZE_1 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_1 +#ifndef CONF_DMAC_STEPSEL_1 +#define CONF_DMAC_STEPSEL_1 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_1 +#ifndef CONF_DMAC_SRCINC_1 +#define CONF_DMAC_SRCINC_1 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_1 +#ifndef CONF_DMAC_DSTINC_1 +#define CONF_DMAC_DSTINC_1 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_1 +#ifndef CONF_DMAC_BEATSIZE_1 +#define CONF_DMAC_BEATSIZE_1 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_1 +#ifndef CONF_DMAC_BLOCKACT_1 +#define CONF_DMAC_BLOCKACT_1 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_1 +#ifndef CONF_DMAC_EVOSEL_1 +#define CONF_DMAC_EVOSEL_1 0 +#endif +// + +// Channel 2 settings +// dmac_channel_2_settings +#ifndef CONF_DMAC_CHANNEL_2_SETTINGS +#define CONF_DMAC_CHANNEL_2_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 2 is enabled or not +// dmac_enable_2 +#ifndef CONF_DMAC_ENABLE_2 +#define CONF_DMAC_ENABLE_2 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 2 is running in standby mode or not +// dmac_runstdby_2 +#ifndef CONF_DMAC_RUNSTDBY_2 +#define CONF_DMAC_RUNSTDBY_2 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_2 +#ifndef CONF_DMAC_TRIGACT_2 +#define CONF_DMAC_TRIGACT_2 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_2 +#ifndef CONF_DMAC_TRIGSRC_2 +#define CONF_DMAC_TRIGSRC_2 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_2 +#ifndef CONF_DMAC_LVL_2 +#define CONF_DMAC_LVL_2 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_2 +#ifndef CONF_DMAC_EVOE_2 +#define CONF_DMAC_EVOE_2 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_2 +#ifndef CONF_DMAC_EVIE_2 +#define CONF_DMAC_EVIE_2 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_2 +#ifndef CONF_DMAC_EVACT_2 +#define CONF_DMAC_EVACT_2 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_2 +#ifndef CONF_DMAC_STEPSIZE_2 +#define CONF_DMAC_STEPSIZE_2 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_2 +#ifndef CONF_DMAC_STEPSEL_2 +#define CONF_DMAC_STEPSEL_2 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_2 +#ifndef CONF_DMAC_SRCINC_2 +#define CONF_DMAC_SRCINC_2 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_2 +#ifndef CONF_DMAC_DSTINC_2 +#define CONF_DMAC_DSTINC_2 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_2 +#ifndef CONF_DMAC_BEATSIZE_2 +#define CONF_DMAC_BEATSIZE_2 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_2 +#ifndef CONF_DMAC_BLOCKACT_2 +#define CONF_DMAC_BLOCKACT_2 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_2 +#ifndef CONF_DMAC_EVOSEL_2 +#define CONF_DMAC_EVOSEL_2 0 +#endif +// + +// Channel 3 settings +// dmac_channel_3_settings +#ifndef CONF_DMAC_CHANNEL_3_SETTINGS +#define CONF_DMAC_CHANNEL_3_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 3 is enabled or not +// dmac_enable_3 +#ifndef CONF_DMAC_ENABLE_3 +#define CONF_DMAC_ENABLE_3 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 3 is running in standby mode or not +// dmac_runstdby_3 +#ifndef CONF_DMAC_RUNSTDBY_3 +#define CONF_DMAC_RUNSTDBY_3 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_3 +#ifndef CONF_DMAC_TRIGACT_3 +#define CONF_DMAC_TRIGACT_3 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_3 +#ifndef CONF_DMAC_TRIGSRC_3 +#define CONF_DMAC_TRIGSRC_3 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_3 +#ifndef CONF_DMAC_LVL_3 +#define CONF_DMAC_LVL_3 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_3 +#ifndef CONF_DMAC_EVOE_3 +#define CONF_DMAC_EVOE_3 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_3 +#ifndef CONF_DMAC_EVIE_3 +#define CONF_DMAC_EVIE_3 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_3 +#ifndef CONF_DMAC_EVACT_3 +#define CONF_DMAC_EVACT_3 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_3 +#ifndef CONF_DMAC_STEPSIZE_3 +#define CONF_DMAC_STEPSIZE_3 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_3 +#ifndef CONF_DMAC_STEPSEL_3 +#define CONF_DMAC_STEPSEL_3 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_3 +#ifndef CONF_DMAC_SRCINC_3 +#define CONF_DMAC_SRCINC_3 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_3 +#ifndef CONF_DMAC_DSTINC_3 +#define CONF_DMAC_DSTINC_3 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_3 +#ifndef CONF_DMAC_BEATSIZE_3 +#define CONF_DMAC_BEATSIZE_3 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_3 +#ifndef CONF_DMAC_BLOCKACT_3 +#define CONF_DMAC_BLOCKACT_3 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_3 +#ifndef CONF_DMAC_EVOSEL_3 +#define CONF_DMAC_EVOSEL_3 0 +#endif +// + +// Channel 4 settings +// dmac_channel_4_settings +#ifndef CONF_DMAC_CHANNEL_4_SETTINGS +#define CONF_DMAC_CHANNEL_4_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 4 is enabled or not +// dmac_enable_4 +#ifndef CONF_DMAC_ENABLE_4 +#define CONF_DMAC_ENABLE_4 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 4 is running in standby mode or not +// dmac_runstdby_4 +#ifndef CONF_DMAC_RUNSTDBY_4 +#define CONF_DMAC_RUNSTDBY_4 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_4 +#ifndef CONF_DMAC_TRIGACT_4 +#define CONF_DMAC_TRIGACT_4 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_4 +#ifndef CONF_DMAC_TRIGSRC_4 +#define CONF_DMAC_TRIGSRC_4 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_4 +#ifndef CONF_DMAC_LVL_4 +#define CONF_DMAC_LVL_4 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_4 +#ifndef CONF_DMAC_EVOE_4 +#define CONF_DMAC_EVOE_4 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_4 +#ifndef CONF_DMAC_EVIE_4 +#define CONF_DMAC_EVIE_4 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_4 +#ifndef CONF_DMAC_EVACT_4 +#define CONF_DMAC_EVACT_4 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_4 +#ifndef CONF_DMAC_STEPSIZE_4 +#define CONF_DMAC_STEPSIZE_4 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_4 +#ifndef CONF_DMAC_STEPSEL_4 +#define CONF_DMAC_STEPSEL_4 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_4 +#ifndef CONF_DMAC_SRCINC_4 +#define CONF_DMAC_SRCINC_4 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_4 +#ifndef CONF_DMAC_DSTINC_4 +#define CONF_DMAC_DSTINC_4 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_4 +#ifndef CONF_DMAC_BEATSIZE_4 +#define CONF_DMAC_BEATSIZE_4 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_4 +#ifndef CONF_DMAC_BLOCKACT_4 +#define CONF_DMAC_BLOCKACT_4 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_4 +#ifndef CONF_DMAC_EVOSEL_4 +#define CONF_DMAC_EVOSEL_4 0 +#endif +// + +// Channel 5 settings +// dmac_channel_5_settings +#ifndef CONF_DMAC_CHANNEL_5_SETTINGS +#define CONF_DMAC_CHANNEL_5_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 5 is enabled or not +// dmac_enable_5 +#ifndef CONF_DMAC_ENABLE_5 +#define CONF_DMAC_ENABLE_5 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 5 is running in standby mode or not +// dmac_runstdby_5 +#ifndef CONF_DMAC_RUNSTDBY_5 +#define CONF_DMAC_RUNSTDBY_5 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_5 +#ifndef CONF_DMAC_TRIGACT_5 +#define CONF_DMAC_TRIGACT_5 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_5 +#ifndef CONF_DMAC_TRIGSRC_5 +#define CONF_DMAC_TRIGSRC_5 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_5 +#ifndef CONF_DMAC_LVL_5 +#define CONF_DMAC_LVL_5 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_5 +#ifndef CONF_DMAC_EVOE_5 +#define CONF_DMAC_EVOE_5 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_5 +#ifndef CONF_DMAC_EVIE_5 +#define CONF_DMAC_EVIE_5 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_5 +#ifndef CONF_DMAC_EVACT_5 +#define CONF_DMAC_EVACT_5 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_5 +#ifndef CONF_DMAC_STEPSIZE_5 +#define CONF_DMAC_STEPSIZE_5 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_5 +#ifndef CONF_DMAC_STEPSEL_5 +#define CONF_DMAC_STEPSEL_5 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_5 +#ifndef CONF_DMAC_SRCINC_5 +#define CONF_DMAC_SRCINC_5 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_5 +#ifndef CONF_DMAC_DSTINC_5 +#define CONF_DMAC_DSTINC_5 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_5 +#ifndef CONF_DMAC_BEATSIZE_5 +#define CONF_DMAC_BEATSIZE_5 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_5 +#ifndef CONF_DMAC_BLOCKACT_5 +#define CONF_DMAC_BLOCKACT_5 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_5 +#ifndef CONF_DMAC_EVOSEL_5 +#define CONF_DMAC_EVOSEL_5 0 +#endif +// + +// Channel 6 settings +// dmac_channel_6_settings +#ifndef CONF_DMAC_CHANNEL_6_SETTINGS +#define CONF_DMAC_CHANNEL_6_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 6 is enabled or not +// dmac_enable_6 +#ifndef CONF_DMAC_ENABLE_6 +#define CONF_DMAC_ENABLE_6 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 6 is running in standby mode or not +// dmac_runstdby_6 +#ifndef CONF_DMAC_RUNSTDBY_6 +#define CONF_DMAC_RUNSTDBY_6 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_6 +#ifndef CONF_DMAC_TRIGACT_6 +#define CONF_DMAC_TRIGACT_6 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_6 +#ifndef CONF_DMAC_TRIGSRC_6 +#define CONF_DMAC_TRIGSRC_6 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_6 +#ifndef CONF_DMAC_LVL_6 +#define CONF_DMAC_LVL_6 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_6 +#ifndef CONF_DMAC_EVOE_6 +#define CONF_DMAC_EVOE_6 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_6 +#ifndef CONF_DMAC_EVIE_6 +#define CONF_DMAC_EVIE_6 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_6 +#ifndef CONF_DMAC_EVACT_6 +#define CONF_DMAC_EVACT_6 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_6 +#ifndef CONF_DMAC_STEPSIZE_6 +#define CONF_DMAC_STEPSIZE_6 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_6 +#ifndef CONF_DMAC_STEPSEL_6 +#define CONF_DMAC_STEPSEL_6 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_6 +#ifndef CONF_DMAC_SRCINC_6 +#define CONF_DMAC_SRCINC_6 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_6 +#ifndef CONF_DMAC_DSTINC_6 +#define CONF_DMAC_DSTINC_6 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_6 +#ifndef CONF_DMAC_BEATSIZE_6 +#define CONF_DMAC_BEATSIZE_6 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_6 +#ifndef CONF_DMAC_BLOCKACT_6 +#define CONF_DMAC_BLOCKACT_6 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_6 +#ifndef CONF_DMAC_EVOSEL_6 +#define CONF_DMAC_EVOSEL_6 0 +#endif +// + +// Channel 7 settings +// dmac_channel_7_settings +#ifndef CONF_DMAC_CHANNEL_7_SETTINGS +#define CONF_DMAC_CHANNEL_7_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 7 is enabled or not +// dmac_enable_7 +#ifndef CONF_DMAC_ENABLE_7 +#define CONF_DMAC_ENABLE_7 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 7 is running in standby mode or not +// dmac_runstdby_7 +#ifndef CONF_DMAC_RUNSTDBY_7 +#define CONF_DMAC_RUNSTDBY_7 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_7 +#ifndef CONF_DMAC_TRIGACT_7 +#define CONF_DMAC_TRIGACT_7 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_7 +#ifndef CONF_DMAC_TRIGSRC_7 +#define CONF_DMAC_TRIGSRC_7 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_7 +#ifndef CONF_DMAC_LVL_7 +#define CONF_DMAC_LVL_7 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_7 +#ifndef CONF_DMAC_EVOE_7 +#define CONF_DMAC_EVOE_7 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_7 +#ifndef CONF_DMAC_EVIE_7 +#define CONF_DMAC_EVIE_7 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_7 +#ifndef CONF_DMAC_EVACT_7 +#define CONF_DMAC_EVACT_7 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_7 +#ifndef CONF_DMAC_STEPSIZE_7 +#define CONF_DMAC_STEPSIZE_7 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_7 +#ifndef CONF_DMAC_STEPSEL_7 +#define CONF_DMAC_STEPSEL_7 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_7 +#ifndef CONF_DMAC_SRCINC_7 +#define CONF_DMAC_SRCINC_7 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_7 +#ifndef CONF_DMAC_DSTINC_7 +#define CONF_DMAC_DSTINC_7 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_7 +#ifndef CONF_DMAC_BEATSIZE_7 +#define CONF_DMAC_BEATSIZE_7 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_7 +#ifndef CONF_DMAC_BLOCKACT_7 +#define CONF_DMAC_BLOCKACT_7 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_7 +#ifndef CONF_DMAC_EVOSEL_7 +#define CONF_DMAC_EVOSEL_7 0 +#endif +// + +// Channel 8 settings +// dmac_channel_8_settings +#ifndef CONF_DMAC_CHANNEL_8_SETTINGS +#define CONF_DMAC_CHANNEL_8_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 8 is enabled or not +// dmac_enable_8 +#ifndef CONF_DMAC_ENABLE_8 +#define CONF_DMAC_ENABLE_8 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 8 is running in standby mode or not +// dmac_runstdby_8 +#ifndef CONF_DMAC_RUNSTDBY_8 +#define CONF_DMAC_RUNSTDBY_8 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_8 +#ifndef CONF_DMAC_TRIGACT_8 +#define CONF_DMAC_TRIGACT_8 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_8 +#ifndef CONF_DMAC_TRIGSRC_8 +#define CONF_DMAC_TRIGSRC_8 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_8 +#ifndef CONF_DMAC_LVL_8 +#define CONF_DMAC_LVL_8 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_8 +#ifndef CONF_DMAC_EVOE_8 +#define CONF_DMAC_EVOE_8 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_8 +#ifndef CONF_DMAC_EVIE_8 +#define CONF_DMAC_EVIE_8 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_8 +#ifndef CONF_DMAC_EVACT_8 +#define CONF_DMAC_EVACT_8 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_8 +#ifndef CONF_DMAC_STEPSIZE_8 +#define CONF_DMAC_STEPSIZE_8 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_8 +#ifndef CONF_DMAC_STEPSEL_8 +#define CONF_DMAC_STEPSEL_8 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_8 +#ifndef CONF_DMAC_SRCINC_8 +#define CONF_DMAC_SRCINC_8 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_8 +#ifndef CONF_DMAC_DSTINC_8 +#define CONF_DMAC_DSTINC_8 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_8 +#ifndef CONF_DMAC_BEATSIZE_8 +#define CONF_DMAC_BEATSIZE_8 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_8 +#ifndef CONF_DMAC_BLOCKACT_8 +#define CONF_DMAC_BLOCKACT_8 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_8 +#ifndef CONF_DMAC_EVOSEL_8 +#define CONF_DMAC_EVOSEL_8 0 +#endif +// + +// Channel 9 settings +// dmac_channel_9_settings +#ifndef CONF_DMAC_CHANNEL_9_SETTINGS +#define CONF_DMAC_CHANNEL_9_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 9 is enabled or not +// dmac_enable_9 +#ifndef CONF_DMAC_ENABLE_9 +#define CONF_DMAC_ENABLE_9 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 9 is running in standby mode or not +// dmac_runstdby_9 +#ifndef CONF_DMAC_RUNSTDBY_9 +#define CONF_DMAC_RUNSTDBY_9 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_9 +#ifndef CONF_DMAC_TRIGACT_9 +#define CONF_DMAC_TRIGACT_9 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_9 +#ifndef CONF_DMAC_TRIGSRC_9 +#define CONF_DMAC_TRIGSRC_9 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_9 +#ifndef CONF_DMAC_LVL_9 +#define CONF_DMAC_LVL_9 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_9 +#ifndef CONF_DMAC_EVOE_9 +#define CONF_DMAC_EVOE_9 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_9 +#ifndef CONF_DMAC_EVIE_9 +#define CONF_DMAC_EVIE_9 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_9 +#ifndef CONF_DMAC_EVACT_9 +#define CONF_DMAC_EVACT_9 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_9 +#ifndef CONF_DMAC_STEPSIZE_9 +#define CONF_DMAC_STEPSIZE_9 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_9 +#ifndef CONF_DMAC_STEPSEL_9 +#define CONF_DMAC_STEPSEL_9 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_9 +#ifndef CONF_DMAC_SRCINC_9 +#define CONF_DMAC_SRCINC_9 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_9 +#ifndef CONF_DMAC_DSTINC_9 +#define CONF_DMAC_DSTINC_9 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_9 +#ifndef CONF_DMAC_BEATSIZE_9 +#define CONF_DMAC_BEATSIZE_9 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_9 +#ifndef CONF_DMAC_BLOCKACT_9 +#define CONF_DMAC_BLOCKACT_9 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_9 +#ifndef CONF_DMAC_EVOSEL_9 +#define CONF_DMAC_EVOSEL_9 0 +#endif +// + +// Channel 10 settings +// dmac_channel_10_settings +#ifndef CONF_DMAC_CHANNEL_10_SETTINGS +#define CONF_DMAC_CHANNEL_10_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 10 is enabled or not +// dmac_enable_10 +#ifndef CONF_DMAC_ENABLE_10 +#define CONF_DMAC_ENABLE_10 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 10 is running in standby mode or not +// dmac_runstdby_10 +#ifndef CONF_DMAC_RUNSTDBY_10 +#define CONF_DMAC_RUNSTDBY_10 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_10 +#ifndef CONF_DMAC_TRIGACT_10 +#define CONF_DMAC_TRIGACT_10 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_10 +#ifndef CONF_DMAC_TRIGSRC_10 +#define CONF_DMAC_TRIGSRC_10 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_10 +#ifndef CONF_DMAC_LVL_10 +#define CONF_DMAC_LVL_10 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_10 +#ifndef CONF_DMAC_EVOE_10 +#define CONF_DMAC_EVOE_10 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_10 +#ifndef CONF_DMAC_EVIE_10 +#define CONF_DMAC_EVIE_10 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_10 +#ifndef CONF_DMAC_EVACT_10 +#define CONF_DMAC_EVACT_10 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_10 +#ifndef CONF_DMAC_STEPSIZE_10 +#define CONF_DMAC_STEPSIZE_10 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_10 +#ifndef CONF_DMAC_STEPSEL_10 +#define CONF_DMAC_STEPSEL_10 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_10 +#ifndef CONF_DMAC_SRCINC_10 +#define CONF_DMAC_SRCINC_10 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_10 +#ifndef CONF_DMAC_DSTINC_10 +#define CONF_DMAC_DSTINC_10 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_10 +#ifndef CONF_DMAC_BEATSIZE_10 +#define CONF_DMAC_BEATSIZE_10 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_10 +#ifndef CONF_DMAC_BLOCKACT_10 +#define CONF_DMAC_BLOCKACT_10 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_10 +#ifndef CONF_DMAC_EVOSEL_10 +#define CONF_DMAC_EVOSEL_10 0 +#endif +// + +// Channel 11 settings +// dmac_channel_11_settings +#ifndef CONF_DMAC_CHANNEL_11_SETTINGS +#define CONF_DMAC_CHANNEL_11_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 11 is enabled or not +// dmac_enable_11 +#ifndef CONF_DMAC_ENABLE_11 +#define CONF_DMAC_ENABLE_11 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 11 is running in standby mode or not +// dmac_runstdby_11 +#ifndef CONF_DMAC_RUNSTDBY_11 +#define CONF_DMAC_RUNSTDBY_11 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_11 +#ifndef CONF_DMAC_TRIGACT_11 +#define CONF_DMAC_TRIGACT_11 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_11 +#ifndef CONF_DMAC_TRIGSRC_11 +#define CONF_DMAC_TRIGSRC_11 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_11 +#ifndef CONF_DMAC_LVL_11 +#define CONF_DMAC_LVL_11 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_11 +#ifndef CONF_DMAC_EVOE_11 +#define CONF_DMAC_EVOE_11 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_11 +#ifndef CONF_DMAC_EVIE_11 +#define CONF_DMAC_EVIE_11 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_11 +#ifndef CONF_DMAC_EVACT_11 +#define CONF_DMAC_EVACT_11 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_11 +#ifndef CONF_DMAC_STEPSIZE_11 +#define CONF_DMAC_STEPSIZE_11 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_11 +#ifndef CONF_DMAC_STEPSEL_11 +#define CONF_DMAC_STEPSEL_11 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_11 +#ifndef CONF_DMAC_SRCINC_11 +#define CONF_DMAC_SRCINC_11 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_11 +#ifndef CONF_DMAC_DSTINC_11 +#define CONF_DMAC_DSTINC_11 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_11 +#ifndef CONF_DMAC_BEATSIZE_11 +#define CONF_DMAC_BEATSIZE_11 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_11 +#ifndef CONF_DMAC_BLOCKACT_11 +#define CONF_DMAC_BLOCKACT_11 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_11 +#ifndef CONF_DMAC_EVOSEL_11 +#define CONF_DMAC_EVOSEL_11 0 +#endif +// + +// Channel 12 settings +// dmac_channel_12_settings +#ifndef CONF_DMAC_CHANNEL_12_SETTINGS +#define CONF_DMAC_CHANNEL_12_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 12 is enabled or not +// dmac_enable_12 +#ifndef CONF_DMAC_ENABLE_12 +#define CONF_DMAC_ENABLE_12 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 12 is running in standby mode or not +// dmac_runstdby_12 +#ifndef CONF_DMAC_RUNSTDBY_12 +#define CONF_DMAC_RUNSTDBY_12 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_12 +#ifndef CONF_DMAC_TRIGACT_12 +#define CONF_DMAC_TRIGACT_12 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_12 +#ifndef CONF_DMAC_TRIGSRC_12 +#define CONF_DMAC_TRIGSRC_12 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_12 +#ifndef CONF_DMAC_LVL_12 +#define CONF_DMAC_LVL_12 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_12 +#ifndef CONF_DMAC_EVOE_12 +#define CONF_DMAC_EVOE_12 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_12 +#ifndef CONF_DMAC_EVIE_12 +#define CONF_DMAC_EVIE_12 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_12 +#ifndef CONF_DMAC_EVACT_12 +#define CONF_DMAC_EVACT_12 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_12 +#ifndef CONF_DMAC_STEPSIZE_12 +#define CONF_DMAC_STEPSIZE_12 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_12 +#ifndef CONF_DMAC_STEPSEL_12 +#define CONF_DMAC_STEPSEL_12 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_12 +#ifndef CONF_DMAC_SRCINC_12 +#define CONF_DMAC_SRCINC_12 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_12 +#ifndef CONF_DMAC_DSTINC_12 +#define CONF_DMAC_DSTINC_12 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_12 +#ifndef CONF_DMAC_BEATSIZE_12 +#define CONF_DMAC_BEATSIZE_12 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_12 +#ifndef CONF_DMAC_BLOCKACT_12 +#define CONF_DMAC_BLOCKACT_12 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_12 +#ifndef CONF_DMAC_EVOSEL_12 +#define CONF_DMAC_EVOSEL_12 0 +#endif +// + +// Channel 13 settings +// dmac_channel_13_settings +#ifndef CONF_DMAC_CHANNEL_13_SETTINGS +#define CONF_DMAC_CHANNEL_13_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 13 is enabled or not +// dmac_enable_13 +#ifndef CONF_DMAC_ENABLE_13 +#define CONF_DMAC_ENABLE_13 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 13 is running in standby mode or not +// dmac_runstdby_13 +#ifndef CONF_DMAC_RUNSTDBY_13 +#define CONF_DMAC_RUNSTDBY_13 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_13 +#ifndef CONF_DMAC_TRIGACT_13 +#define CONF_DMAC_TRIGACT_13 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_13 +#ifndef CONF_DMAC_TRIGSRC_13 +#define CONF_DMAC_TRIGSRC_13 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_13 +#ifndef CONF_DMAC_LVL_13 +#define CONF_DMAC_LVL_13 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_13 +#ifndef CONF_DMAC_EVOE_13 +#define CONF_DMAC_EVOE_13 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_13 +#ifndef CONF_DMAC_EVIE_13 +#define CONF_DMAC_EVIE_13 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_13 +#ifndef CONF_DMAC_EVACT_13 +#define CONF_DMAC_EVACT_13 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_13 +#ifndef CONF_DMAC_STEPSIZE_13 +#define CONF_DMAC_STEPSIZE_13 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_13 +#ifndef CONF_DMAC_STEPSEL_13 +#define CONF_DMAC_STEPSEL_13 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_13 +#ifndef CONF_DMAC_SRCINC_13 +#define CONF_DMAC_SRCINC_13 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_13 +#ifndef CONF_DMAC_DSTINC_13 +#define CONF_DMAC_DSTINC_13 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_13 +#ifndef CONF_DMAC_BEATSIZE_13 +#define CONF_DMAC_BEATSIZE_13 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_13 +#ifndef CONF_DMAC_BLOCKACT_13 +#define CONF_DMAC_BLOCKACT_13 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_13 +#ifndef CONF_DMAC_EVOSEL_13 +#define CONF_DMAC_EVOSEL_13 0 +#endif +// + +// Channel 14 settings +// dmac_channel_14_settings +#ifndef CONF_DMAC_CHANNEL_14_SETTINGS +#define CONF_DMAC_CHANNEL_14_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 14 is enabled or not +// dmac_enable_14 +#ifndef CONF_DMAC_ENABLE_14 +#define CONF_DMAC_ENABLE_14 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 14 is running in standby mode or not +// dmac_runstdby_14 +#ifndef CONF_DMAC_RUNSTDBY_14 +#define CONF_DMAC_RUNSTDBY_14 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_14 +#ifndef CONF_DMAC_TRIGACT_14 +#define CONF_DMAC_TRIGACT_14 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_14 +#ifndef CONF_DMAC_TRIGSRC_14 +#define CONF_DMAC_TRIGSRC_14 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_14 +#ifndef CONF_DMAC_LVL_14 +#define CONF_DMAC_LVL_14 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_14 +#ifndef CONF_DMAC_EVOE_14 +#define CONF_DMAC_EVOE_14 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_14 +#ifndef CONF_DMAC_EVIE_14 +#define CONF_DMAC_EVIE_14 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_14 +#ifndef CONF_DMAC_EVACT_14 +#define CONF_DMAC_EVACT_14 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_14 +#ifndef CONF_DMAC_STEPSIZE_14 +#define CONF_DMAC_STEPSIZE_14 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_14 +#ifndef CONF_DMAC_STEPSEL_14 +#define CONF_DMAC_STEPSEL_14 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_14 +#ifndef CONF_DMAC_SRCINC_14 +#define CONF_DMAC_SRCINC_14 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_14 +#ifndef CONF_DMAC_DSTINC_14 +#define CONF_DMAC_DSTINC_14 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_14 +#ifndef CONF_DMAC_BEATSIZE_14 +#define CONF_DMAC_BEATSIZE_14 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_14 +#ifndef CONF_DMAC_BLOCKACT_14 +#define CONF_DMAC_BLOCKACT_14 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_14 +#ifndef CONF_DMAC_EVOSEL_14 +#define CONF_DMAC_EVOSEL_14 0 +#endif +// + +// Channel 15 settings +// dmac_channel_15_settings +#ifndef CONF_DMAC_CHANNEL_15_SETTINGS +#define CONF_DMAC_CHANNEL_15_SETTINGS 0 +#endif + +// Channel Enable +// Indicates whether channel 15 is enabled or not +// dmac_enable_15 +#ifndef CONF_DMAC_ENABLE_15 +#define CONF_DMAC_ENABLE_15 0 +#endif + +// Channel Run in Standby +// Indicates whether channel 15 is running in standby mode or not +// dmac_runstdby_15 +#ifndef CONF_DMAC_RUNSTDBY_15 +#define CONF_DMAC_RUNSTDBY_15 0 +#endif + +// Trigger action +// <0=> One trigger required for each block transfer +// <2=> One trigger required for each beat transfer +// <3=> One trigger required for each transaction +// Defines the trigger action used for a transfer +// dmac_trigact_15 +#ifndef CONF_DMAC_TRIGACT_15 +#define CONF_DMAC_TRIGACT_15 0 +#endif + +// Trigger source +// <0x00=> Only software/event triggers +// <0x01=> RTC Timestamp +// <0x02=> SERCOM0 RX Trigger +// <0x03=> SERCOM0 TX Trigger +// <0x04=> SERCOM1 RX Trigger +// <0x05=> SERCOM1 TX Trigger +// <0x06=> SERCOM2 RX Trigger +// <0x07=> SERCOM2 TX Trigger +// <0x08=> SERCOM3 RX Trigger +// <0x09=> SERCOM3 TX Trigger +// <0x0A=> SERCOM4 RX Trigger +// <0x0B=> SERCOM4 TX Trigger +// <0x0C=> SERCOM5 RX Trigger +// <0x0D=> SERCOM5 TX Trigger +// <0x0E=> TCC0 Overflow Trigger +// <0x0F=> TCC0 Match/Compare 0 Trigger +// <0x10=> TCC0 Match/Compare 1 Trigger +// <0x11=> TCC0 Match/Compare 2 Trigger +// <0x12=> TCC0 Match/Compare 3 Trigger +// <0x13=> TC0 Overflow Trigger +// <0x14=> TC0 Match/Compare 0 Trigger +// <0x15=> TC0 Match/Compare 1 Trigger +// <0x16=> TC1 Overflow Trigger +// <0x17=> TC1 Match/Compare 0 Trigger +// <0x18=> TC1 Match/Compare 1 Trigger +// <0x19=> TC2 Overflow Trigger +// <0x1A=> TC2 Match/Compare 0 Trigger +// <0x1B=> TC2 Match/Compare 1 Trigger +// <0x1C=> TC3 Overflow Trigger +// <0x1D=> TC3 Match/Compare 0 Trigger +// <0x1E=> TC3 Match/Compare 1 Trigger +// <0x1F=> ADC Result Ready Trigger +// <0x20=> SLCD Display Memory Update Trigger +// <0x21=> SLCD Automated Character Mapping Data Ready Trigger +// <0x22=> SLCD Automated Bit Mapping Data Ready Trigger +// <0x23=> AES Write Trigger +// <0x24=> AES Read Trigger +// <0x25=> PTC End of Conversion Trigger +// <0x26=> PTC Sequence Trigger +// <0x27=> PTC Window Comparator Trigger +// Defines the peripheral trigger which is source of the transfer +// dmac_trifsrc_15 +#ifndef CONF_DMAC_TRIGSRC_15 +#define CONF_DMAC_TRIGSRC_15 0 +#endif + +// Channel Arbitration Level +// <0=> Channel priority 0 +// <1=> Channel priority 1 +// <2=> Channel priority 2 +// <3=> Channel priority 3 +// Defines the arbitration level for this channel +// dmac_lvl_15 +#ifndef CONF_DMAC_LVL_15 +#define CONF_DMAC_LVL_15 0 +#endif + +// Channel Event Output +// Indicates whether channel event generation is enabled or not +// dmac_evoe_15 +#ifndef CONF_DMAC_EVOE_15 +#define CONF_DMAC_EVOE_15 0 +#endif + +// Channel Event Input +// Indicates whether channel event reception is enabled or not +// dmac_evie_15 +#ifndef CONF_DMAC_EVIE_15 +#define CONF_DMAC_EVIE_15 0 +#endif + +// Event Input Action +// <0=> No action +// <1=> Normal transfer and conditional transfer on strobe trigger +// <2=> Conditional transfer trigger +// <3=> Conditional block transfer +// <4=> Channel suspend operation +// <5=> Channel resume operation +// <6=> Skip next block suspend action +// Defines the event input action +// dmac_evact_15 +#ifndef CONF_DMAC_EVACT_15 +#define CONF_DMAC_EVACT_15 0 +#endif + +// Address Increment Step Size +// <0=> Next ADDR = ADDR + (BEATSIZE + 1) * 1 +// <1=> Next ADDR = ADDR + (BEATSIZE + 1) * 2 +// <2=> Next ADDR = ADDR + (BEATSIZE + 1) * 4 +// <3=> Next ADDR = ADDR + (BEATSIZE + 1) * 8 +// <4=> Next ADDR = ADDR + (BEATSIZE + 1) * 16 +// <5=> Next ADDR = ADDR + (BEATSIZE + 1) * 32 +// <6=> Next ADDR = ADDR + (BEATSIZE + 1) * 64 +// <7=> Next ADDR = ADDR + (BEATSIZE + 1) * 128 +// Defines the address increment step size, applies to source or destination address +// dmac_stepsize_15 +#ifndef CONF_DMAC_STEPSIZE_15 +#define CONF_DMAC_STEPSIZE_15 0 +#endif + +// Step Selection +// <0=> Step size settings apply to the destination address +// <1=> Step size settings apply to the source address +// Defines whether source or destination addresses are using the step size settings +// dmac_stepsel_15 +#ifndef CONF_DMAC_STEPSEL_15 +#define CONF_DMAC_STEPSEL_15 0 +#endif + +// Source Address Increment +// Indicates whether the source address incrementation is enabled or not +// dmac_srcinc_15 +#ifndef CONF_DMAC_SRCINC_15 +#define CONF_DMAC_SRCINC_15 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incrementation is enabled or not +// dmac_dstinc_15 +#ifndef CONF_DMAC_DSTINC_15 +#define CONF_DMAC_DSTINC_15 0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_15 +#ifndef CONF_DMAC_BEATSIZE_15 +#define CONF_DMAC_BEATSIZE_15 0 +#endif + +// Block Action +// <0=> Channel will be disabled if it is the last block transfer in the transaction +// <1=> Channel will be disabled if it is the last block transfer in the transaction and block interrupt +// <2=> Channel suspend operation is complete +// <3=> Both channel suspend operation and block interrupt +// Defines the the DMAC should take after a block transfer has completed +// dmac_blockact_15 +#ifndef CONF_DMAC_BLOCKACT_15 +#define CONF_DMAC_BLOCKACT_15 0 +#endif + +// Event Output Selection +// <0=> Event generation disabled +// <1=> Event strobe when block transfer complete +// <3=> Event strobe when beat transfer complete +// Defines the event output selection +// dmac_evosel_15 +#ifndef CONF_DMAC_EVOSEL_15 +#define CONF_DMAC_EVOSEL_15 0 +#endif +// + +// + +// <<< end of configuration section >>> + +#endif // HPL_DMAC_CONFIG_H -- cgit v1.2.3