From b4b81f476c991a8d1620e1a9e010fcff847b3c04 Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Tue, 20 Jul 2021 16:26:54 -0400 Subject: bring in all the atmel studio stuff --- .../include/instance/sercom3.h | 298 ++++++++++----------- 1 file changed, 142 insertions(+), 156 deletions(-) mode change 100755 => 100644 Sensor Watch Starter Project/include/instance/sercom3.h (limited to 'Sensor Watch Starter Project/include/instance/sercom3.h') diff --git a/Sensor Watch Starter Project/include/instance/sercom3.h b/Sensor Watch Starter Project/include/instance/sercom3.h old mode 100755 new mode 100644 index 2d310a73..f7256e22 --- a/Sensor Watch Starter Project/include/instance/sercom3.h +++ b/Sensor Watch Starter Project/include/instance/sercom3.h @@ -1,156 +1,142 @@ -/** - * \file - * - * \brief Instance description for SERCOM3 - * - * Copyright (c) 2015 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ - -#ifndef _SAML22_SERCOM3_INSTANCE_ -#define _SAML22_SERCOM3_INSTANCE_ - -/* ========== Register definition for SERCOM3 peripheral ========== */ -#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) -#define REG_SERCOM3_I2CM_CTRLA (0x42001000U) /**< \brief (SERCOM3) I2CM Control A */ -#define REG_SERCOM3_I2CM_CTRLB (0x42001004U) /**< \brief (SERCOM3) I2CM Control B */ -#define REG_SERCOM3_I2CM_BAUD (0x4200100CU) /**< \brief (SERCOM3) I2CM Baud Rate */ -#define REG_SERCOM3_I2CM_INTENCLR (0x42001014U) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ -#define REG_SERCOM3_I2CM_INTENSET (0x42001016U) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ -#define REG_SERCOM3_I2CM_INTFLAG (0x42001018U) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CM_STATUS (0x4200101AU) /**< \brief (SERCOM3) I2CM Status */ -#define REG_SERCOM3_I2CM_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) I2CM Synchronization Busy */ -#define REG_SERCOM3_I2CM_ADDR (0x42001024U) /**< \brief (SERCOM3) I2CM Address */ -#define REG_SERCOM3_I2CM_DATA (0x42001028U) /**< \brief (SERCOM3) I2CM Data */ -#define REG_SERCOM3_I2CM_DBGCTRL (0x42001030U) /**< \brief (SERCOM3) I2CM Debug Control */ -#define REG_SERCOM3_I2CS_CTRLA (0x42001000U) /**< \brief (SERCOM3) I2CS Control A */ -#define REG_SERCOM3_I2CS_CTRLB (0x42001004U) /**< \brief (SERCOM3) I2CS Control B */ -#define REG_SERCOM3_I2CS_INTENCLR (0x42001014U) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ -#define REG_SERCOM3_I2CS_INTENSET (0x42001016U) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ -#define REG_SERCOM3_I2CS_INTFLAG (0x42001018U) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CS_STATUS (0x4200101AU) /**< \brief (SERCOM3) I2CS Status */ -#define REG_SERCOM3_I2CS_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) I2CS Synchronization Busy */ -#define REG_SERCOM3_I2CS_ADDR (0x42001024U) /**< \brief (SERCOM3) I2CS Address */ -#define REG_SERCOM3_I2CS_DATA (0x42001028U) /**< \brief (SERCOM3) I2CS Data */ -#define REG_SERCOM3_SPI_CTRLA (0x42001000U) /**< \brief (SERCOM3) SPI Control A */ -#define REG_SERCOM3_SPI_CTRLB (0x42001004U) /**< \brief (SERCOM3) SPI Control B */ -#define REG_SERCOM3_SPI_BAUD (0x4200100CU) /**< \brief (SERCOM3) SPI Baud Rate */ -#define REG_SERCOM3_SPI_INTENCLR (0x42001014U) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ -#define REG_SERCOM3_SPI_INTENSET (0x42001016U) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ -#define REG_SERCOM3_SPI_INTFLAG (0x42001018U) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM3_SPI_STATUS (0x4200101AU) /**< \brief (SERCOM3) SPI Status */ -#define REG_SERCOM3_SPI_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) SPI Synchronization Busy */ -#define REG_SERCOM3_SPI_ADDR (0x42001024U) /**< \brief (SERCOM3) SPI Address */ -#define REG_SERCOM3_SPI_DATA (0x42001028U) /**< \brief (SERCOM3) SPI Data */ -#define REG_SERCOM3_SPI_DBGCTRL (0x42001030U) /**< \brief (SERCOM3) SPI Debug Control */ -#define REG_SERCOM3_USART_CTRLA (0x42001000U) /**< \brief (SERCOM3) USART Control A */ -#define REG_SERCOM3_USART_CTRLB (0x42001004U) /**< \brief (SERCOM3) USART Control B */ -#define REG_SERCOM3_USART_CTRLC (0x42001008U) /**< \brief (SERCOM3) USART Control C */ -#define REG_SERCOM3_USART_BAUD (0x4200100CU) /**< \brief (SERCOM3) USART Baud Rate */ -#define REG_SERCOM3_USART_RXPL (0x4200100EU) /**< \brief (SERCOM3) USART Receive Pulse Length */ -#define REG_SERCOM3_USART_INTENCLR (0x42001014U) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ -#define REG_SERCOM3_USART_INTENSET (0x42001016U) /**< \brief (SERCOM3) USART Interrupt Enable Set */ -#define REG_SERCOM3_USART_INTFLAG (0x42001018U) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM3_USART_STATUS (0x4200101AU) /**< \brief (SERCOM3) USART Status */ -#define REG_SERCOM3_USART_SYNCBUSY (0x4200101CU) /**< \brief (SERCOM3) USART Synchronization Busy */ -#define REG_SERCOM3_USART_RXERRCNT (0x42001020U) /**< \brief (SERCOM3) USART Receive Error Count */ -#define REG_SERCOM3_USART_DATA (0x42001028U) /**< \brief (SERCOM3) USART Data */ -#define REG_SERCOM3_USART_DBGCTRL (0x42001030U) /**< \brief (SERCOM3) USART Debug Control */ -#else -#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) I2CM Control A */ -#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) I2CM Control B */ -#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4200100CU) /**< \brief (SERCOM3) I2CM Baud Rate */ -#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ -#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ -#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) I2CM Status */ -#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) I2CM Synchronization Busy */ -#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x42001024U) /**< \brief (SERCOM3) I2CM Address */ -#define REG_SERCOM3_I2CM_DATA (*(RwReg8 *)0x42001028U) /**< \brief (SERCOM3) I2CM Data */ -#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x42001030U) /**< \brief (SERCOM3) I2CM Debug Control */ -#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) I2CS Control A */ -#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) I2CS Control B */ -#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ -#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ -#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) I2CS Status */ -#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) I2CS Synchronization Busy */ -#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x42001024U) /**< \brief (SERCOM3) I2CS Address */ -#define REG_SERCOM3_I2CS_DATA (*(RwReg8 *)0x42001028U) /**< \brief (SERCOM3) I2CS Data */ -#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) SPI Control A */ -#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) SPI Control B */ -#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4200100CU) /**< \brief (SERCOM3) SPI Baud Rate */ -#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ -#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ -#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) SPI Status */ -#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) SPI Synchronization Busy */ -#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x42001024U) /**< \brief (SERCOM3) SPI Address */ -#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x42001028U) /**< \brief (SERCOM3) SPI Data */ -#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x42001030U) /**< \brief (SERCOM3) SPI Debug Control */ -#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x42001000U) /**< \brief (SERCOM3) USART Control A */ -#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x42001004U) /**< \brief (SERCOM3) USART Control B */ -#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x42001008U) /**< \brief (SERCOM3) USART Control C */ -#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4200100CU) /**< \brief (SERCOM3) USART Baud Rate */ -#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4200100EU) /**< \brief (SERCOM3) USART Receive Pulse Length */ -#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001014U) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ -#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001016U) /**< \brief (SERCOM3) USART Interrupt Enable Set */ -#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x42001018U) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4200101AU) /**< \brief (SERCOM3) USART Status */ -#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4200101CU) /**< \brief (SERCOM3) USART Synchronization Busy */ -#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x42001020U) /**< \brief (SERCOM3) USART Receive Error Count */ -#define REG_SERCOM3_USART_DATA (*(RwReg16*)0x42001028U) /**< \brief (SERCOM3) USART Data */ -#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x42001030U) /**< \brief (SERCOM3) USART Debug Control */ -#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ - -/* ========== Instance parameters for SERCOM3 peripheral ========== */ -#define SERCOM3_DMAC_ID_RX 8 // Index of DMA RX trigger -#define SERCOM3_DMAC_ID_TX 9 // Index of DMA TX trigger -#define SERCOM3_GCLK_ID_CORE 19 -#define SERCOM3_GCLK_ID_SLOW 15 -#define SERCOM3_INT_MSB 6 -#define SERCOM3_PMSB 3 -#define SERCOM3_SPI 1 // SPI mode implemented? -#define SERCOM3_TWIM 1 // TWI Master mode implemented? -#define SERCOM3_TWIS 1 // TWI Slave mode implemented? -#define SERCOM3_TWI_HSMODE 0 // TWI HighSpeed mode implemented? -#define SERCOM3_USART 1 // USART mode implemented? -#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented? -#define SERCOM3_USART_LIN_MASTER 0 // USART LIN Master mode implemented? -#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented? - -#endif /* _SAML22_SERCOM3_INSTANCE_ */ +/** + * \file + * + * \brief Instance description for SERCOM3 + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_SERCOM3_INSTANCE_ +#define _SAML22_SERCOM3_INSTANCE_ + +/* ========== Register definition for SERCOM3 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SERCOM3_I2CM_CTRLA (0x42001000) /**< \brief (SERCOM3) I2CM Control A */ +#define REG_SERCOM3_I2CM_CTRLB (0x42001004) /**< \brief (SERCOM3) I2CM Control B */ +#define REG_SERCOM3_I2CM_BAUD (0x4200100C) /**< \brief (SERCOM3) I2CM Baud Rate */ +#define REG_SERCOM3_I2CM_INTENCLR (0x42001014) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ +#define REG_SERCOM3_I2CM_INTENSET (0x42001016) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ +#define REG_SERCOM3_I2CM_INTFLAG (0x42001018) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CM_STATUS (0x4200101A) /**< \brief (SERCOM3) I2CM Status */ +#define REG_SERCOM3_I2CM_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) I2CM Synchronization Busy */ +#define REG_SERCOM3_I2CM_ADDR (0x42001024) /**< \brief (SERCOM3) I2CM Address */ +#define REG_SERCOM3_I2CM_DATA (0x42001028) /**< \brief (SERCOM3) I2CM Data */ +#define REG_SERCOM3_I2CM_DBGCTRL (0x42001030) /**< \brief (SERCOM3) I2CM Debug Control */ +#define REG_SERCOM3_I2CS_CTRLA (0x42001000) /**< \brief (SERCOM3) I2CS Control A */ +#define REG_SERCOM3_I2CS_CTRLB (0x42001004) /**< \brief (SERCOM3) I2CS Control B */ +#define REG_SERCOM3_I2CS_INTENCLR (0x42001014) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ +#define REG_SERCOM3_I2CS_INTENSET (0x42001016) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ +#define REG_SERCOM3_I2CS_INTFLAG (0x42001018) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CS_STATUS (0x4200101A) /**< \brief (SERCOM3) I2CS Status */ +#define REG_SERCOM3_I2CS_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) I2CS Synchronization Busy */ +#define REG_SERCOM3_I2CS_ADDR (0x42001024) /**< \brief (SERCOM3) I2CS Address */ +#define REG_SERCOM3_I2CS_DATA (0x42001028) /**< \brief (SERCOM3) I2CS Data */ +#define REG_SERCOM3_SPI_CTRLA (0x42001000) /**< \brief (SERCOM3) SPI Control A */ +#define REG_SERCOM3_SPI_CTRLB (0x42001004) /**< \brief (SERCOM3) SPI Control B */ +#define REG_SERCOM3_SPI_BAUD (0x4200100C) /**< \brief (SERCOM3) SPI Baud Rate */ +#define REG_SERCOM3_SPI_INTENCLR (0x42001014) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ +#define REG_SERCOM3_SPI_INTENSET (0x42001016) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ +#define REG_SERCOM3_SPI_INTFLAG (0x42001018) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM3_SPI_STATUS (0x4200101A) /**< \brief (SERCOM3) SPI Status */ +#define REG_SERCOM3_SPI_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) SPI Synchronization Busy */ +#define REG_SERCOM3_SPI_ADDR (0x42001024) /**< \brief (SERCOM3) SPI Address */ +#define REG_SERCOM3_SPI_DATA (0x42001028) /**< \brief (SERCOM3) SPI Data */ +#define REG_SERCOM3_SPI_DBGCTRL (0x42001030) /**< \brief (SERCOM3) SPI Debug Control */ +#define REG_SERCOM3_USART_CTRLA (0x42001000) /**< \brief (SERCOM3) USART Control A */ +#define REG_SERCOM3_USART_CTRLB (0x42001004) /**< \brief (SERCOM3) USART Control B */ +#define REG_SERCOM3_USART_CTRLC (0x42001008) /**< \brief (SERCOM3) USART Control C */ +#define REG_SERCOM3_USART_BAUD (0x4200100C) /**< \brief (SERCOM3) USART Baud Rate */ +#define REG_SERCOM3_USART_RXPL (0x4200100E) /**< \brief (SERCOM3) USART Receive Pulse Length */ +#define REG_SERCOM3_USART_INTENCLR (0x42001014) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ +#define REG_SERCOM3_USART_INTENSET (0x42001016) /**< \brief (SERCOM3) USART Interrupt Enable Set */ +#define REG_SERCOM3_USART_INTFLAG (0x42001018) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM3_USART_STATUS (0x4200101A) /**< \brief (SERCOM3) USART Status */ +#define REG_SERCOM3_USART_SYNCBUSY (0x4200101C) /**< \brief (SERCOM3) USART Synchronization Busy */ +#define REG_SERCOM3_USART_RXERRCNT (0x42001020) /**< \brief (SERCOM3) USART Receive Error Count */ +#define REG_SERCOM3_USART_DATA (0x42001028) /**< \brief (SERCOM3) USART Data */ +#define REG_SERCOM3_USART_DBGCTRL (0x42001030) /**< \brief (SERCOM3) USART Debug Control */ +#else +#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) I2CM Control A */ +#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) I2CM Control B */ +#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4200100CUL) /**< \brief (SERCOM3) I2CM Baud Rate */ +#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ +#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ +#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) I2CM Status */ +#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) I2CM Synchronization Busy */ +#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) I2CM Address */ +#define REG_SERCOM3_I2CM_DATA (*(RwReg8 *)0x42001028UL) /**< \brief (SERCOM3) I2CM Data */ +#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) I2CM Debug Control */ +#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) I2CS Control A */ +#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) I2CS Control B */ +#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ +#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ +#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) I2CS Status */ +#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) I2CS Synchronization Busy */ +#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) I2CS Address */ +#define REG_SERCOM3_I2CS_DATA (*(RwReg8 *)0x42001028UL) /**< \brief (SERCOM3) I2CS Data */ +#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) SPI Control A */ +#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) SPI Control B */ +#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4200100CUL) /**< \brief (SERCOM3) SPI Baud Rate */ +#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ +#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ +#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) SPI Status */ +#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) SPI Synchronization Busy */ +#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x42001024UL) /**< \brief (SERCOM3) SPI Address */ +#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x42001028UL) /**< \brief (SERCOM3) SPI Data */ +#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) SPI Debug Control */ +#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x42001000UL) /**< \brief (SERCOM3) USART Control A */ +#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x42001004UL) /**< \brief (SERCOM3) USART Control B */ +#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x42001008UL) /**< \brief (SERCOM3) USART Control C */ +#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4200100CUL) /**< \brief (SERCOM3) USART Baud Rate */ +#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4200100EUL) /**< \brief (SERCOM3) USART Receive Pulse Length */ +#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001014UL) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ +#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001016UL) /**< \brief (SERCOM3) USART Interrupt Enable Set */ +#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x42001018UL) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4200101AUL) /**< \brief (SERCOM3) USART Status */ +#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4200101CUL) /**< \brief (SERCOM3) USART Synchronization Busy */ +#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x42001020UL) /**< \brief (SERCOM3) USART Receive Error Count */ +#define REG_SERCOM3_USART_DATA (*(RwReg16*)0x42001028UL) /**< \brief (SERCOM3) USART Data */ +#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x42001030UL) /**< \brief (SERCOM3) USART Debug Control */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SERCOM3 peripheral ========== */ +#define SERCOM3_DMAC_ID_RX 8 // Index of DMA RX trigger +#define SERCOM3_DMAC_ID_TX 9 // Index of DMA TX trigger +#define SERCOM3_GCLK_ID_CORE 19 +#define SERCOM3_GCLK_ID_SLOW 15 +#define SERCOM3_INT_MSB 6 +#define SERCOM3_PMSB 3 +#define SERCOM3_SPI 1 // SPI mode implemented? +#define SERCOM3_TWIM 1 // TWI Master mode implemented? +#define SERCOM3_TWIS 1 // TWI Slave mode implemented? +#define SERCOM3_TWI_HSMODE 0 // TWI HighSpeed mode implemented? +#define SERCOM3_USART 1 // USART mode implemented? +#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented? +#define SERCOM3_USART_LIN_MASTER 0 // USART LIN Master mode implemented? +#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented? + +#endif /* _SAML22_SERCOM3_INSTANCE_ */ -- cgit v1.2.3