diff options
Diffstat (limited to 'watch-library/include/instance/slcd.h')
| -rw-r--r-- | watch-library/include/instance/slcd.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/watch-library/include/instance/slcd.h b/watch-library/include/instance/slcd.h new file mode 100644 index 00000000..c4785831 --- /dev/null +++ b/watch-library/include/instance/slcd.h @@ -0,0 +1,126 @@ +/** + * \file + * + * \brief Instance description for SLCD + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_SLCD_INSTANCE_ +#define _SAML22_SLCD_INSTANCE_ + +/* ========== Register definition for SLCD peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SLCD_CTRLA (0x42003C00) /**< \brief (SLCD) Control A */ +#define REG_SLCD_CTRLB (0x42003C04) /**< \brief (SLCD) Control B */ +#define REG_SLCD_CTRLC (0x42003C06) /**< \brief (SLCD) Control C */ +#define REG_SLCD_CTRLD (0x42003C08) /**< \brief (SLCD) Control D */ +#define REG_SLCD_EVCTRL (0x42003C0C) /**< \brief (SLCD) Event Control */ +#define REG_SLCD_INTENCLR (0x42003C0D) /**< \brief (SLCD) Interrupt Enable Clear */ +#define REG_SLCD_INTENSET (0x42003C0E) /**< \brief (SLCD) Interrupt Enable Set */ +#define REG_SLCD_INTFLAG (0x42003C0F) /**< \brief (SLCD) Interrupt Flag Status and Clear */ +#define REG_SLCD_STATUS (0x42003C10) /**< \brief (SLCD) Status */ +#define REG_SLCD_SYNCBUSY (0x42003C14) /**< \brief (SLCD) Synchronization Busy */ +#define REG_SLCD_FC0 (0x42003C18) /**< \brief (SLCD) Frame Counter 0 Configuration */ +#define REG_SLCD_FC1 (0x42003C19) /**< \brief (SLCD) Frame Counter 1 Configuration */ +#define REG_SLCD_FC2 (0x42003C1A) /**< \brief (SLCD) Frame Counter 2 Configuration */ +#define REG_SLCD_LPENL (0x42003C1C) /**< \brief (SLCD) LCD Pin Enable Low */ +#define REG_SLCD_LPENH (0x42003C20) /**< \brief (SLCD) LCD Pin Enable High */ +#define REG_SLCD_SDATAL0 (0x42003C24) /**< \brief (SLCD) Segments Data Low for COM0 Line */ +#define REG_SLCD_SDATAH0 (0x42003C28) /**< \brief (SLCD) Segments Data High for COM0 Line */ +#define REG_SLCD_SDATAL1 (0x42003C2C) /**< \brief (SLCD) Segments Data Low for COM1 Line */ +#define REG_SLCD_SDATAH1 (0x42003C30) /**< \brief (SLCD) Segments Data High for COM1 Line */ +#define REG_SLCD_SDATAL2 (0x42003C34) /**< \brief (SLCD) Segments Data Low for COM2 Line */ +#define REG_SLCD_SDATAH2 (0x42003C38) /**< \brief (SLCD) Segments Data High for COM2 Line */ +#define REG_SLCD_SDATAL3 (0x42003C3C) /**< \brief (SLCD) Segments Data Low for COM3 Line */ +#define REG_SLCD_SDATAH3 (0x42003C40) /**< \brief (SLCD) Segments Data High for COM3 Line */ +#define REG_SLCD_SDATAL4 (0x42003C44) /**< \brief (SLCD) Segments Data Low for COM4 Line */ +#define REG_SLCD_SDATAH4 (0x42003C48) /**< \brief (SLCD) Segments Data High for COM4 Line */ +#define REG_SLCD_SDATAL5 (0x42003C4C) /**< \brief (SLCD) Segments Data Low for COM5 Line */ +#define REG_SLCD_SDATAH5 (0x42003C50) /**< \brief (SLCD) Segments Data High for COM5 Line */ +#define REG_SLCD_SDATAL6 (0x42003C54) /**< \brief (SLCD) Segments Data Low for COM6 Line */ +#define REG_SLCD_SDATAH6 (0x42003C58) /**< \brief (SLCD) Segments Data High for COM6 Line */ +#define REG_SLCD_SDATAL7 (0x42003C5C) /**< \brief (SLCD) Segments Data Low for COM7 Line */ +#define REG_SLCD_SDATAH7 (0x42003C60) /**< \brief (SLCD) Segments Data High for COM7 Line */ +#define REG_SLCD_ISDATA (0x42003C64) /**< \brief (SLCD) Indirect Segments Data Access */ +#define REG_SLCD_BCFG (0x42003C68) /**< \brief (SLCD) Blink Configuration */ +#define REG_SLCD_CSRCFG (0x42003C6C) /**< \brief (SLCD) Circular Shift Register Configuration */ +#define REG_SLCD_CMCFG (0x42003C70) /**< \brief (SLCD) Character Mapping Configuration */ +#define REG_SLCD_ACMCFG (0x42003C74) /**< \brief (SLCD) Automated Character Mapping Configuration */ +#define REG_SLCD_ABMCFG (0x42003C78) /**< \brief (SLCD) Automated Bit Mapping Configuration */ +#define REG_SLCD_CMDATA (0x42003C7C) /**< \brief (SLCD) Character Mapping Segments Data */ +#define REG_SLCD_CMDMASK (0x42003C80) /**< \brief (SLCD) Character Mapping Segments Data Mask */ +#define REG_SLCD_CMINDEX (0x42003C84) /**< \brief (SLCD) Character Mapping SEG/COM Index */ +#else +#define REG_SLCD_CTRLA (*(RwReg *)0x42003C00UL) /**< \brief (SLCD) Control A */ +#define REG_SLCD_CTRLB (*(RwReg16*)0x42003C04UL) /**< \brief (SLCD) Control B */ +#define REG_SLCD_CTRLC (*(RwReg16*)0x42003C06UL) /**< \brief (SLCD) Control C */ +#define REG_SLCD_CTRLD (*(RwReg8 *)0x42003C08UL) /**< \brief (SLCD) Control D */ +#define REG_SLCD_EVCTRL (*(RwReg8 *)0x42003C0CUL) /**< \brief (SLCD) Event Control */ +#define REG_SLCD_INTENCLR (*(RwReg8 *)0x42003C0DUL) /**< \brief (SLCD) Interrupt Enable Clear */ +#define REG_SLCD_INTENSET (*(RwReg8 *)0x42003C0EUL) /**< \brief (SLCD) Interrupt Enable Set */ +#define REG_SLCD_INTFLAG (*(RwReg8 *)0x42003C0FUL) /**< \brief (SLCD) Interrupt Flag Status and Clear */ +#define REG_SLCD_STATUS (*(RoReg8 *)0x42003C10UL) /**< \brief (SLCD) Status */ +#define REG_SLCD_SYNCBUSY (*(RoReg *)0x42003C14UL) /**< \brief (SLCD) Synchronization Busy */ +#define REG_SLCD_FC0 (*(RwReg8 *)0x42003C18UL) /**< \brief (SLCD) Frame Counter 0 Configuration */ +#define REG_SLCD_FC1 (*(RwReg8 *)0x42003C19UL) /**< \brief (SLCD) Frame Counter 1 Configuration */ +#define REG_SLCD_FC2 (*(RwReg8 *)0x42003C1AUL) /**< \brief (SLCD) Frame Counter 2 Configuration */ +#define REG_SLCD_LPENL (*(RwReg *)0x42003C1CUL) /**< \brief (SLCD) LCD Pin Enable Low */ +#define REG_SLCD_LPENH (*(RwReg *)0x42003C20UL) /**< \brief (SLCD) LCD Pin Enable High */ +#define REG_SLCD_SDATAL0 (*(RwReg *)0x42003C24UL) /**< \brief (SLCD) Segments Data Low for COM0 Line */ +#define REG_SLCD_SDATAH0 (*(RwReg *)0x42003C28UL) /**< \brief (SLCD) Segments Data High for COM0 Line */ +#define REG_SLCD_SDATAL1 (*(RwReg *)0x42003C2CUL) /**< \brief (SLCD) Segments Data Low for COM1 Line */ +#define REG_SLCD_SDATAH1 (*(RwReg *)0x42003C30UL) /**< \brief (SLCD) Segments Data High for COM1 Line */ +#define REG_SLCD_SDATAL2 (*(RwReg *)0x42003C34UL) /**< \brief (SLCD) Segments Data Low for COM2 Line */ +#define REG_SLCD_SDATAH2 (*(RwReg *)0x42003C38UL) /**< \brief (SLCD) Segments Data High for COM2 Line */ +#define REG_SLCD_SDATAL3 (*(RwReg *)0x42003C3CUL) /**< \brief (SLCD) Segments Data Low for COM3 Line */ +#define REG_SLCD_SDATAH3 (*(RwReg *)0x42003C40UL) /**< \brief (SLCD) Segments Data High for COM3 Line */ +#define REG_SLCD_SDATAL4 (*(RwReg *)0x42003C44UL) /**< \brief (SLCD) Segments Data Low for COM4 Line */ +#define REG_SLCD_SDATAH4 (*(RwReg *)0x42003C48UL) /**< \brief (SLCD) Segments Data High for COM4 Line */ +#define REG_SLCD_SDATAL5 (*(RwReg *)0x42003C4CUL) /**< \brief (SLCD) Segments Data Low for COM5 Line */ +#define REG_SLCD_SDATAH5 (*(RwReg *)0x42003C50UL) /**< \brief (SLCD) Segments Data High for COM5 Line */ +#define REG_SLCD_SDATAL6 (*(RwReg *)0x42003C54UL) /**< \brief (SLCD) Segments Data Low for COM6 Line */ +#define REG_SLCD_SDATAH6 (*(RwReg *)0x42003C58UL) /**< \brief (SLCD) Segments Data High for COM6 Line */ +#define REG_SLCD_SDATAL7 (*(RwReg *)0x42003C5CUL) /**< \brief (SLCD) Segments Data Low for COM7 Line */ +#define REG_SLCD_SDATAH7 (*(RwReg *)0x42003C60UL) /**< \brief (SLCD) Segments Data High for COM7 Line */ +#define REG_SLCD_ISDATA (*(WoReg *)0x42003C64UL) /**< \brief (SLCD) Indirect Segments Data Access */ +#define REG_SLCD_BCFG (*(RwReg *)0x42003C68UL) /**< \brief (SLCD) Blink Configuration */ +#define REG_SLCD_CSRCFG (*(RwReg *)0x42003C6CUL) /**< \brief (SLCD) Circular Shift Register Configuration */ +#define REG_SLCD_CMCFG (*(RwReg8 *)0x42003C70UL) /**< \brief (SLCD) Character Mapping Configuration */ +#define REG_SLCD_ACMCFG (*(RwReg *)0x42003C74UL) /**< \brief (SLCD) Automated Character Mapping Configuration */ +#define REG_SLCD_ABMCFG (*(RwReg8 *)0x42003C78UL) /**< \brief (SLCD) Automated Bit Mapping Configuration */ +#define REG_SLCD_CMDATA (*(WoReg *)0x42003C7CUL) /**< \brief (SLCD) Character Mapping Segments Data */ +#define REG_SLCD_CMDMASK (*(RwReg *)0x42003C80UL) /**< \brief (SLCD) Character Mapping Segments Data Mask */ +#define REG_SLCD_CMINDEX (*(RwReg16*)0x42003C84UL) /**< \brief (SLCD) Character Mapping SEG/COM Index */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SLCD peripheral ========== */ +#define SLCD_DMAC_ID_ABMDRDY 34 +#define SLCD_DMAC_ID_ACMDRDY 33 +#define SLCD_DMAC_ID_DMU 32 +#define SLCD_MAX_COM 8 // Max number of COM lines (4 or 8) +#define SLCD_MAX_SEG 44 // Max number of SEG lines (24 or 44) +#define SLCD_NB_LP 52 // Number of LCD pins ([28..64] or [48..64]) + +#endif /* _SAML22_SLCD_INSTANCE_ */ |