diff options
Diffstat (limited to 'watch-library/hw/driver_init.c')
| -rw-r--r-- | watch-library/hw/driver_init.c | 96 |
1 files changed, 0 insertions, 96 deletions
diff --git a/watch-library/hw/driver_init.c b/watch-library/hw/driver_init.c deleted file mode 100644 index 09723bec..00000000 --- a/watch-library/hw/driver_init.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Code generated from Atmel Start. - * - * This file will be overwritten when reconfiguring your Atmel Start project. - * Please copy examples or other code you want to keep to a separate file - * to avoid losing it when reconfiguring. - */ - -#include "driver_init.h" -#include <peripheral_clk_config.h> -#include <utils.h> -#include <hal_init.h> - -struct slcd_sync_descriptor SEGMENT_LCD_0; - -struct i2c_m_sync_desc I2C_0; - -void I2C_0_PORT_init(void) { - - gpio_set_pin_pull_mode(SDA, - // <y> Pull configuration - // <id> pad_pull_config - // <GPIO_PULL_OFF"> Off - // <GPIO_PULL_UP"> Pull-up - // <GPIO_PULL_DOWN"> Pull-down - GPIO_PULL_OFF); - - gpio_set_pin_function(SDA, PINMUX_PB30C_SERCOM1_PAD0); - - gpio_set_pin_pull_mode(SCL, - // <y> Pull configuration - // <id> pad_pull_config - // <GPIO_PULL_OFF"> Off - // <GPIO_PULL_UP"> Pull-up - // <GPIO_PULL_DOWN"> Pull-down - GPIO_PULL_OFF); - - gpio_set_pin_function(SCL, PINMUX_PB31C_SERCOM1_PAD1); -} - -void I2C_0_CLOCK_init(void) { - hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM1_GCLK_ID_CORE, CONF_GCLK_SERCOM1_CORE_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos)); - hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM1_GCLK_ID_SLOW, CONF_GCLK_SERCOM1_SLOW_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos)); - hri_mclk_set_APBCMASK_SERCOM1_bit(MCLK); -} - -void I2C_0_init(void) { - I2C_0_CLOCK_init(); - i2c_m_sync_init(&I2C_0, SERCOM1); - I2C_0_PORT_init(); -} - -void delay_driver_init(void) { - delay_init(SysTick); -} - -void SEGMENT_LCD_0_PORT_init(void) { - gpio_set_pin_function(SLCD0, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD1, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD2, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD3, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD4, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD5, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD6, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD7, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD8, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD9, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD10, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD11, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD12, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD13, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD14, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD15, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD16, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD17, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD18, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD19, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD20, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD21, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD22, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD23, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD24, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD25, GPIO_PIN_FUNCTION_B); - gpio_set_pin_function(SLCD26, GPIO_PIN_FUNCTION_B); -} - -/** - * \brief SLCD initialization function - * - * Enables SLCD peripheral, clocks and initializes SLCD driver - */ -void SEGMENT_LCD_0_init(void) { - hri_mclk_set_APBCMASK_SLCD_bit(SLCD); - slcd_sync_init(&SEGMENT_LCD_0, SLCD); - SEGMENT_LCD_0_PORT_init(); -} |